Public Works Department-PWD has published Repair Of Maharana Partap Govt Degree College At Amb Sh Providing And Laying Cement Concrete Flooring And Distempering Painting Etc Against Deposit. Submission Date for this Tender is 29-06-2022. Building Work Tenders in bharwain Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing plinth protection 50mm (Fifty millimeter) thick with cement concrete 1:3:6 (one cement : three coarse sand (Zone-III): six graded/ stone aggregate 20mm (twenty millimeter)nominal size over 75mm thick bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excomption, levelling, dressing and finishing the top smooth complete inall floor level/height as per the direction by the Engineer in charge including entire carriage of materialswith in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 2 | Excavation in earth work in foundation and trenches etceterain all kind and classification of soil such as pick work,jumper work, pick jumper work, blasting workand hard blasting workand saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height includingchiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removalof slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etceteraconsolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per CPWD specifications 2019 complete andthe direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 3 | Providing and laying in position cement concrete 1:4:8(one cement: four coarse sand: eightgraded/crushed stone aggregate 40mm (forty miillmeter) nominal size mechanically mixed and curing complete excluding cost of centering and shuttering in foundation and plinth level as per CPWD specifications 2019 complete andthe direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 4 | 40 mm(forty millimeter) thick with 20 mm (twenty millimeter) nominal size stone aggregate Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded/crushed stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetera complete upto any floor level/ height as per CPWD specifications 2019 complete andthe direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 5 | Repairs to plaster with cement mortar 1:4 (one cement: four coarse sand) of thickness12 mm (twelve millimeter) to 20 mm (twenty millimeter) in patches of area 2.5 sqm (two point five square meter) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per CPWD specifications 2019 complete andthe direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 6 | Providing and fixingCeramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimeter)of Kazaria, NITCO, SOMAMY, ORIENT, RAK make (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 12 mm (twelvemillimeter) thick cement mortar 1:3 (one Cement : three Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as per CPWD specifications 2019 complete andthe direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 7 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm (forty millimeter) C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required Size 450x300x150 mm (four hundred fifty into three hundred into one hundred fifty millimeter) as per CPWD specifications 2019 complete andthe direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 8 | Providing and fixing 15mm (fifteenmillimeter) dia long nose bib tapas per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 9 | Providing and fixing 12mm (twelve millimeter) thickprelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (forty millimeter) thick frame as per architectural drawings as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 10 | Providing and fixing glazing with float glass panes of 4 mm (four millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per CPWD specifications 2019 completein foundations, footings, bases of columns, etcetera for mass concreteas per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts andother incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 11 | Providing and fixing 12mm (twelve millimeter) thick Teak wood particle board BWP phenol bounded exterior/interior grade for cup board shutteras per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 12 | Providing and fixing 300x16mm(three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etceteraetera complete as per the directionby the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 13 | Providing and fixing 200x10mm (two hundred into ten millimeter )aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etceteraetera completeas per the directionby the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 14 | Providing and fixing 150x10mm (one hundred fifty into ten millimeter )aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera completeas per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 15 | Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 16 | Removing dry or oil bound distemper wash by steel wire brushing and/or scraping sand preparing to wall surface etcetera as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 17 | Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height asper the direction by the Engineer in charge including entire carriage of materialswith in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess orother taxes imposed by the Government. |
| 18 | Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth completeas per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 19 | Applying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 20 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications of Nerolac/Asian/Berger make two or more coats applied on walls @ 1.25 ltr/10 sqm (one point twenty five liter per ten square meter) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zero point seventy five per ten square meter) asper the direction by the Engineer in charge in all floor leve/height including entire carriage of materialswith in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess orother taxes imposed by the Government. |
| 21 | Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with paint remover of approved brand and manufactureasper the direction by the Engineer in charge in all floor leve/height including entire carriage of materialswith in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess orother taxes imposed by the Government. |
| 22 | Painting two coat (excluding priming coat) on previously paintedwood and wood based surface with enamel paintmake ofICI (Dulux Gloss) Nerolac Berger(Luxol High Gloss) Asian Paints ( premium Apcolite Gloss) Shalimarother than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping withenamel paint other than white complete inallheight as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 23 | Removing old paint from Steel and other metal surfaces and making the surface even.with hand scrapping as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 24 | Painting two coat (excluding priming coat ) on previously painted steel & other metal surfaces with readymixed paint,brushing oil, grease to give an even shade including cleaning the surface of all dirt,dust and other foreign matter with white readymixed paintas per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 25 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of ISI make in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of 80 mm (eighty millimeter) thick C.C. paver block of M-30 (M thirty) grade with approved color design and pattern as per required size and pattern, finishing and sweeping extra sand complete all upto any floor level/ height as per the directionby the Engineer in charge including entire carriage of materialswith in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
