}

Bi-Annual Fitness / Passing Of Departmental Tank, jammu,Jammu And Kashmir Tender

Public Health Engineering Department has published a tender for Bi-Annual Fitness / Passing Of Departmental Tanker No. Jk02ad-6210. Submission Date for this Tender is 29-06-2022. Fitness Equipment Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.


Tender Notice

32751979
Bi-Annual Fitness / Passing Of Departmental Tanker No. Jk02ad-6210
Works
Indian
Jammu And Kashmir
jammu
29-06-2022

Tender Details

Bi-Annual Fitness / Passing Of Departmental Tanker No. Jk02ad-6210

Key Value

Document Fees
INR 200 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Bi-Annual Fitness / Passing of Departmental Tanker No. JK02AD-6210
Sl. No. Item Description
1REPEAR TO THE RADIATOR OF THE TANKER. By way of dismantling ofradiator from the tanker. Cleaning it properly with water thensoldering its fins where ever required and then checking it. Providing and topping of coolant and providing & fittingtank, hose pipe set ,Fan belt sets, Thermostat and upper tank body. Assembling of all parts. Complete job required cost of labour and material etc.
2REPAIRING TO TURBO CHARGER :- Repairing to the turbo of the departmental water tankerby dismantling. Providing and fitting of 1 No. turbo core assembly, 1 No. turbo pipe 1 set, air filter set complete assembling of all the parts. Complete job with cost of material and labour charges.
3FRONT AND REAR LEAF SPRING ASSY.Dismantling of all the four leaf spring assemblies. Segregation dostroted leaves. Providing and fitting of main leaf rear 1 no.. Aux. leaves 3 no. 4th leaf 1no 5th rear 2nos. Front main leaves 2nos,2nd front 1no,4th front 1no,5th front 2nos., Leaf spring Bush1 set, U bolt front and rear 4 no. centre bolt front and rear 4 nos.Leaf spring pin 2 nos. shocker 2 nos. U clamp 8 nos. Hangers -2nos.Retensioningofleaf springbefore fitting. Greasing of all the pins.Complete job including labour and material cost.
4FABRICATION OF SEATS AND BACKS Fabrication of seats and backs after removing of all the Old / worn out seats , providing and fitting of ply board, springs, coir, foam , Rexene and cloth. Patching work inside the seats. Fitting of seats after providing hinges etc. Complete job including cost of labour and material cost.
5PAINTING AND LETTER WRITING. Complete washing of the vehicle. Making of surface ofafter application of car solder and rubbing thereof. Spraying of one coat of red – oxide . Metal Primer inside and outside the tank and chassis of vehicle. The spraying of 2 coats of deco paint on the tank and on the vehicle. Complete letter writing on the vehicle including the tank and number plates. Complete job including labour and material cost.
6REPAIR TO ENGINE THE HOOD:-Repair to the engine hood of departmental water tanker by way of cutting of worn out nuts and boltsand remove of damaged portion of the hoodwith the Gas cutter and then Patching the new sheet ,repair to the doors of the tanker by providing doorlock as per requirement, washer bots and nutsetc. P /f of front Glassalong with rubber and silicon tube so the it will fix properly. Repair to the foot rest of the driver as well as calendar side .Job also required mounting set of cabin hood with hood depending upon requirement Complete job includes cost of material and labour charges .
7REPARING TO SELF STARTER :Repairto departmentalwater tankerto itsSelfby dismantling ,cleaning of all parts with petrol. Providing& fitting of 1 set carbon bush set ,1 set copper bush set,1 no solonedswitch, 1 no. bender drive , 1no.field coil set , 1no oil seal, assembly and fitting 1 set battery lead complete 1 set new wiring .job also required repair to the alternator by way of dismantling p/f of new carbon bushes ,statter, rotor, cut off and rectifier plate Complete assembling and fitting. Complete job includes cost of material and labour charges
8Upkeepment of 6000 GPH x 80 mtrx 12.5 HP Submersible Pumpset of T/well Sec-14 Nanak Nagar by way of disconnection of power supply and extraction of Submersible Pumpset using skilled labour with allied tools and tackles. Dismantling and shifting of pumpset to workshop by Mech. Transport. Repairing by Providing, fabrication and fitting of S.S pump shaft as per sample, 8no. impellers, 6 no. pump bodies, 8no. neck rings, 8no. body bushes, SS coupling pulley and nut bolts and assembling of punp atworkshop. The Job includes dismantling and repairing of 12.5 HP Submersible motor by providing, fabrication and fitting of thrust pad set and rotor bushes. Assembling of the motor, coupling with pump and testing the pumpset in the test pit then shifting of pumpset to the site of installation. Making electrical connections of motor with sub cable by making leak proof joint and lowering of pump set along with providing and replacing rubber gaskets and nut bolts. Making connections of submersible cable with panel and then testing on full load
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2022 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail