|
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator) / manaual means in foundation trenches or drains (not eceeding 1.5m in width or 10sqm on plan), excavated soil and disposal ofsurplus excavated soil as directed, within a lead of 50m including dressing of sides and ramming of bottoms, lift upto 1.5m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering. 1:2:4 (1 Cement : 2 Coarse Sand (Zone-III) : 4 Graded Stone Aggregate 20mm noiminal size) (a) Under Foundations, Plinth Beams, etc. |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering. 1:2:4 (1 Cement : 2 Coarse Sand (Zone-III) : 4 Graded Stone Aggregate 20mm noiminal size) (b) Under Floors |
| 4 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling and dressing & finishing the top smooth. |
| 5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5mm noiminal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-1:1.5:3 (1 Cement:1.5 coarse Sand: 3 Graded Stone 20mm nominal size)All work upto plinth level: |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Brick work with commont burnt clay (non-modular) of class-150 in foundationa and plinth:In cement mortar 1:4 (1 Cement:4 Coarse Sand) |
| 9 | Sand and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 10 | Brick work with commont burnt clay (non-modular) of class-150 in superstructure above plinth level upto floor five level in all shapes and sizes:In cement mortar 1:4 (1 Cement:4 Coarse Sand) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level :Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level:(Including bars at the junctions) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 13 | 12mm cement plaster of mix: 1:4 (1 Cement : 4 Fine Sand)(a) Ceiling Plaster |
| 14 | 12mm cement plaster of mix: 1:6 (1 Cement : 6 Fine Sand)(b) Internal Wall Plaster |
| 15 | 12mm cement plaster of mix: 1:6 (1 Cement : 6 Fine Sand)(c) External Plaster- |
| 16 | 15mm thick cement plaster in 1:3 (1 Cement : 3 Fine Sand moarter) incluiding floating coat of 3mm thickneat cement slarry complete |
| 17 | 25mm thick 1:2:4 plain cement concrete flooring with 3mm flooring coat of neat cement complete |
| 18 | Providing and fixing glass strip in joint of cement concrete floors with 40mm wide & 4 mm thick glass strips complete |
| 19 | Cement plaster skirting with cement moarter 1:3 (1 cement: 3 coarse sand ) & floating coat of neat cement slarry complete. |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 22 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 23 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.Door Frames (Angle Sections) |
| 24 | P&F hand rail of approved size by welding etc to MS tube steel ladder railing complete |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block boardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:32 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 26 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 27 | P&F 4mm thick glass panel with putty complete |
| 28 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 29 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade: two or more coats on new work complete |
| 30 | Finishing walls with Acrylic smooth exterior paint of required shade :New work (Two or more coats applied @ 1067 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Complete |
| 31 | Painting of new wood work with one coat of ready mixed priming paint and one coat of approved superiour ready mixed synthetic enamble paint complete |
| 32 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofingcement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4hours. |
| 33 | Providing and laying water proofing treatment with fibre glass cloth on roof of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying. DSR Code 22.6 |
| 34 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase |
| 35 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 36 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each depositedlayer by ramming and watering. Lead up to 50 m and lift up to 1.5 m. |
| 37 | P&L sunken filling by 40mm O.B.B grit incluiding complete |
| 38 | P&f wall face unplasticsed rigid 110mm PVC rain water pipe complete. |
| 39 | Making khurrah 45x45cm of 5mm cement concrete 1:2:4 (1 cement: 2 concrete: 4 graded stone)aggregate 20mm with 12mm thick 1:3(1 cement: 3coarse sand) cement moarter plaster complete with neet finish. |
| 40 | Centering and shuttering including strutting, propping etc. and removal of form for all heights:Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 41 | Centering and shuttering including strutting, propping etc. and removal of form for all heights:Suspended floors, roofs, landings, balconies and access platform. |
| 42 | Provideing & fixing 20mm Dia GI Pipe exposed work incluideing coast of material lavour T&P etc Complete. |
| 43 | Provideing & fixing 15mm Dia GI Pipe exposed work incluideing coast of material lavour T&P etc Complete. |
| 44 | Provideing & fixing 15mm Dia C.P. Brass Shower work incluideing coast of material lavour T&P etc Complete. |
| 45 | Provideing & fixing 15mm Dia Conceald C.P. stop cock work incluideing coast of material lavour T&P etc Complete. |
| 46 | Provideing & fixing 15mm C.P.stop cock work incluideing coast of material lavour T&P etc Complete. |
| 47 | Provideing & fixing 15mm C.P. Bib Cock short body work incluideing coast of material lavour T&P etc Complete. |
| 48 | Provideing & fixing 15mm C.P. Bib Cock Long body work incluideing coast of material lavour T&P etc Complete. |
| 49 | Supply & fixing P.V.C. Water Storege Tank work incluideing coast of material lavour T&P etc Complete. |
| 50 | Provideing & fixing 20mm Dia Tank Connection work incluideing coast of material lavour T&P etc Complete. |
| 51 | Provideing & fixing P.V.C. Flote valve work incluideing coast of material lavour T&P etc Complete. |
| 52 | Provideing & fixing flow gate valve 20mm dia work incluideing coast of material lavour T&P etc Complete. |
| 53 | Provideing & fixing flow gate valve 15mm dia work incluideing coast of material lavour T&P etc Complete. |
| 54 | Provideing & fixing 100mm Heavy Quality CP Jali Work incluideing coast of material lavour T&P etc Complete. |
| 55 | Provideing & fixing CP Brass waste Jali for sink/wash basin Work incluideing coast of material lavour T&P etc Complete. |
| 56 | Provideing & fixingP.V.C. Waste Pipe 32mm dia for sink/wash basin Work incluideing coast of material lavour T&P etc Complete. P.V.C. Waste Pipe 32mm dia |
| 57 | Provideing & fixing white Viterous china orissa pattern W.C. pan with P trap and 10 Ltr P.V.C. Flushing system incluiding complete. |
| 58 | Provideing & fixing white viterious china wash besin size 550x400mm work incluideing coast of material lavour T&P etc Complete. |
| 59 | Provideing & fixingP.V.C. Waste Pipe 40 mm dia for sink/wash basin Work incluideing coast of material lavour T&P etc Complete. P.V.C. Waste Pipe 32mm dia |
| 60 | Provideing & fixing stainless steel A ISI 304 kitchen shink as per IS: 13983 with C.I. Brackets and stainless steel plug 40 mm. incluideing painting of fittings and brackets, cutting and making good the walls wherever required |
| 61 | Provideing & fixing PTMT Bottale trap for washbesin & shink Work incluideing coast of material lavour T&P etc Complete. |
| 62 | Provideing & fixing PTMT Towel rod 450mm long Work incluideing coast of material lavour T&P etc Complete. |
| 63 | Provideing & fixing PTMT shelf440x124mm Work incluideing coast of material lavour T&P etc Complete. |
| 64 | Provideing & fixing Oval shape440x350mm (outer dimensions) Mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. |
| 65 | Provideing & Laying 100mm dia S.W. pipe work incluideing bed concrete as standard design Complete. |
| 66 | Provideing & fixing on wall face unplasticised Rigid110mm dia P.V.C waste water pipe Complete. |
| 67 | Provideing & fixing on wall face unplasticised Rigid110mm dia P.V.C waste water band Complete. |
| 68 | Provideing & fixing on wall face unplasticised Rigid110mm dia P.V.C waste water socket Complete. |
| 69 | Provideing & fixing on wall face unplasticised Rigid110mm dia P.V.C waste water TEE Complete. |
| 70 | Provideing & fixing on wall face unplasticised Rigid90mm dia P.V.C waste water pipe Complete. |
| 71 | Provideing & fixing on wall face unplasticised Rigid90mm dia P.V.C waste water band Complete. |
| 72 | Provideing & fixing on wall face unplasticised Rigid90mm dia P.V.C waste water socket Complete. |
| 73 | Provideing & fixing on wall face unplasticised Rigid90mm dia P.V.C waste water Tee Complete. |
| 74 | P/F Square mouth S.W. gully trap with C.I Grating & C.I. Cover with chamber brick work complete |
| 75 | Provideing & Fixing 20x20mm square bar MS footrest incluiding fixing in saptic tank with 20x20x10cm concrete blocks in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete |
| 76 | Provideing & Fixing 500mm internal Dia precast R.C.C. manhole cover and frame of requar shape and aprove quality. |
| 77 | Provideing & Fixing C.I.Tee at the inlate & outlet in septick tank/sock pit complete |
| 78 | Providing and fixing sand cast iron S&S vent pipe as per IS: 1729 |
