|
| 1 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. |
| 2 | Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed. |
| 3 | Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed. |
| 4 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 5 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 6 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane. |
| 7 | S&F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane. |
| 8 | S & F in rep vitreous china wash down water closet pan of pedestal pattern, white with \"P\" or \"S\" traps,including connecting to trap and to flushing pipe etc complete all as specified. |
| 9 | S&F in repPVC (SWR) WC connector 110mm dia. |
| 10 | S&F in rep Vitreous China Squatting pan \"Orissa pattern\" size 580 x440 mm white with integral foot rest. |
| 11 | S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. |
| 12 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers. |
| 13 | S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI bracketscomplete all as specified and directed. |
| 14 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and fair. |
| 15 | M&L for 15 mm thick screed bed in CM 1:6 finished rough for laying floor tiles. |
| 16 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 17 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 18 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 19 | Dismantling of floor, hearth or wall tiling including cement mortar bedding. |
| 20 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles. |
| 21 | M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wallset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 22 | M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation. |
| 23 | M & L for preparation of wood or wood base materials of any description and girth not otherwise described and treated with two coats of creosote oil. |
| 24 | Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets. |
| 25 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces. |
| 26 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces. |
| 27 | M & L for 2 nd class Hard wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm. |
| 28 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 29 | Dismantling of rain water pipes, cast and vent pipes of any dia, any pattern including all fittings. |
| 30 | S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls. |
| 31 | S&F PVC (SWR) pipes single socketed 75mm dia in any length with rubber ring joints fixed to walls. |
| 32 | S&F PVC (SWR) bends any radius, bend 110mm dia with access door. |
| 33 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door110mm dia. |
| 34 | S&F PVC (SWR) bends any radius, with access door75mm dia. |
| 35 | S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 36 | S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level). |
| 38 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 39 | M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protectionsurfacefinished even and smooth using with extra cement. |
| 40 | S&F Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 41 | Supply and fix TMT bars 8 mm dia and over (confirming to Fe-410-S or Fe-410-0) cut to length, bent to shape as required including cranking & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 42 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 mm gradedstone aggregate as in landings,staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves, manhole covers and similar articles with plain faces. |
| 43 | S & F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 44 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers . |
| 45 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store. |
| 46 | Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store. |
| 47 | Dismantling of water tanks exc 1000 ltrs & n. exc 2000 ltrs capacity and removing to store. |
| 48 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 49 | S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 50 | S&F PVC water storage tanks of 2000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 51 | S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 52 | S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified. |
| 53 | S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified. |
| 54 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 55 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm. |
| 56 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete. |
| 57 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick. |
| 58 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc. |
| 59 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 60 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 61 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 62 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 63 | S& F Aluminium anodised barrel tower bolts150mm long of extruded section and fixed. |
| 64 | S& F Aluminium anodised barrel tower bolts100mm long of extruded section and fixed. |
| 65 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised. |
| 66 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised. |
| 67 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 68 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length includingvulcanised rubber piece. |
| 69 | S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
| 70 | S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight andincluding fixing brackets, finals and decorative end supports etc complete all as directed. |
| 71 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 72 | M & L for 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement. |
| 73 | Material and labour for 10mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement. |
| 74 | M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces (with liquid WPC mixed as per manufacturers instructions)finishing the surfaces even & smooth w/o using extra cement.(WPC will be measured and paid separately) |
| 75 | Supply only liquid water proofing compound. |
| 76 | Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD),over a coat of 3mm thick wall care putty all as specified including preperation of surfaces. |
| 77 | Preparing newly plastered surfaces of ceilings and applying three coats of white wash. |
| 78 | Preparing new plastered surfaces of wall and applying Two coats of cement base paint on surfaces of walls over one coat of alkali resistant primer all as specified and directed. |
| 79 | Disconnecting exc 250 and N.exc 500 Ltrs tank, setting aside ( or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnection and re-fixing in position.Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc. |
| 80 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 81 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 82 | Taking down shutters repair and refixing in same openingarea not exceeding 1.0 Sqm |
| 83 | Taking down shutters repair and refixing in same openingarea exc 1.0 sqm but not exceeding 2.0 Sqm |
| 84 | S&F in repair Grating doom 125mm dia with and without wast holePTMT (Minimum weight 40 grms) |
| 85 | S&F in repair Grating doom 100mm dia with and without waste holePTMT (Minimum weight 40 grms) |
| 86 | S&F 32mm PVC waste pipe for kitchen sink ,WHB, 450mm long. |
| 87 | S&F PVC wall paneling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 88 | S&F 5mm PVC sheet fillet of width 35mm for wall peneling inclusive of fixing on to wall. |
| 89 | S&F Tar felt PBS roll, for waterproffing size(20mtrX1mtrX2mm) as per spection and direction. |
| 90 | S & F health foucet with duble lock 1.2 mtr stainless steel flexible hose & wall hook(Make Hindware Cat No 16000) |
| 91 | S&F CP towel ring , fixed with chromium plated brass screws. |
| 92 | S&F soap dish, any type, fiexd to plugs with chromium plated brass screws |
| 93 | Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of Appex weather proofpaint (colour and tint as approved) on walls etc complete all as specified and directed. |
| 94 | S&F CP towel rail, fixed with chromium plated brass screws. |
| 95 | Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed. |
| 96 | Cleaning of septic tank chamber by removing effluent water and sludge and buried the same in excavated pits, by digging pits in hard/dense soil including removing surplus earth to a distance not exceeding 50 mtr from starting point and filling up the top portion of pit by excavated soil and sprinkling bleaching powder @ 0.5 Kg per Sqm on excavated areas including temporary baricades complete all as specified and directed. |
| 97 | Cleaning of 150mm dia SWG sewage pipe line including manholes after removing the cover (Cast Iron or RCC covers) and placing the same after cleaning the manholes/sewage line complete all as specified and directed. |
| 98 | Cleaning of 100mm dia SWG sewage pipe line including manholes after removing the cover (Cast Iron or RCC covers) and placing the same after cleaning the manholes/sewage line complete all as specified and directed. |
| 99 | Material and labour for attending/ clearing daily complaints of blockages of floor traps, gully traps, bathroom, WC, Kitchen and wash basin blockage opening etc The contractor will ensure the cleaning/clearing of all the complaints complete on same date. Cleaning of line will be carried as on required basis as directed by Engr-in-charge without affecting the progress of complaints by deploying addl safaiwala if needed and nothing extra will be paid on this account complete all as specified and directed. |
| 100 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation/sewage line and getting out in hard/dense soil complete all as specified and directed. |
| 101 | All as per serial item No 100 above but exceeding 1.5meter but not exceeding 3.00 mtr in depth complete all as specified and directed. |
| 102 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick, in hard/dense soil complete all as specified and directed. |
| 103 | Removal of surplus soil of distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed. |
| 104 | Demolition and breaking up drain pipes 150mm SWG pipe, set in cement morter complete all as specified and directed. |
| 105 | Demolition and breaking up drain pipes 100mm SWG pipe, set in cement morter complete all as specified and directed. |
| 106 | Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed.. |
| 107 | Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 100mm on after they are laid and tested complete all as specified and directed. |
| 108 | Material and labour for Salt glased stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed. |
| 109 | Material and labour for Salt glased stone ware drain pipe 100 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed. |
| 110 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150mm internal dia of pipes complete all as specified and directed. |
| 111 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 100mm internal dia of pipes complete all as specified and directed. |