Urban Development Department-UDD has published Construction Of Multipurpose Bus Terminal At Hazarinag, Municipal Corporation Hazaribag. Submission Date for this Tender is 18-06-2022. Building Work Tenders in hazaribag Jharkhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jun-2022 | Change amount of emd | Fee | 18-06-2022 |
| 2 | 08-Jun-2022 | closing date extended | Date | 18-06-2022 |
| Sl. No. | Item Description |
| 1 | Construction of Multipurpose Bus Terminal |
| 2 | Supplying materials and labours for construction inspection chamber of designation class 75 B bricks size 750 mmdeep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12 mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 kg.) along with earth work in excavation and 80 mm thick P.C.C (1:3:6) in foundation and refilling all complete. |
| 3 | Excavation for roadwork in soli with hydraulic excavator of 0.9 cum bucketcapacity including cutting and loading in tipper, trimming in bottom and slopes in accordance with requirement of lines and grades and cross section and transporting to the embankment location with all lifts grades and cross section, lift and lead up to 1000 m including royalty @ 27.48.00 per cum. cost of watering rolling and compection. |
| 4 | Construction of Embankment with material deposited from roadway cutting (construction of emabankment with approved material deposited at site graded and compacted to meet requirements of Table 300-2, rolling with smooth wheeled roller. |
| 5 | Wet Mix Macadam (Providing, laying,spreading and compacting graded stone aggregates to WMM specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in sub-base/basecourse on well prepared surface and compacting with vibratory roller to achieve desired density. with vibratory rollar |
| 6 | Granular sub base with coarse graded material (400-2) (construction of granular sub base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method rotavator at OMC and compacting with the vibratory roller to achive the desired density, complete as per clause 401. |
| 7 | Prime coat, providing and applying primer coat with bitumen emulsion on prepared surface granular base including cleaning of road surface and spraying primer coat at the rate of 0.6 kg/sqm using mechanical means. |
| 8 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil Item-A) and disposal of excavated earth as obtained to a distance up to 50M. Including all lifts with leveling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E\I. |
| 9 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classification of soil item - B) |
| 10 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m and lift of 1.5 m all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 11 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 12 | Providing coarse clean sand in filling in foundation trenches including ramming & watering in layers not exceeding 150mm thick with all leads & lifts including cost of all materials, labour, royalty & taxes all complete as per building specs.and direction of E/I. |
| 13 | Providing designation 75 A Brick work in CM (1:4) in foundatoin & plinth |
| 14 | Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Providing designation 75A Brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mmthickmortarjoints,costof screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 16 | Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l. |
| 17 | 1:2:4 (1 Cement :2 Coarse Sand (zone - III) : 4 graded stone aggregate 20mm nominal size) |
| 18 | 1:4:8 (1 Cement :4 Coarse Sand (zone - III) : 8 graded stone aggregate 40mm nominal size) |
| 19 | Providing & fixing at or near grond level precast cement concrete in kerbs, edgings etc as per approved pattern and sitting in position with cement mortar 1:3 (1 Cement : 3 Coarse sand), including the cost of required centering , shutteing complete. 1:1.5:3 (1 Cement :1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20mm nominal size) |
| 20 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zoneIII) : 4 graded stone aggregate 20mm nominal size). |
| 21 | 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers abutment, post and struts etc. above plinth level up to floor five level excluding cost of centring , shuttering finishing and reinforcement: 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 23 | Reinforced cement concrete work in beams, suspended floors , roofs having slope uot 15 degree landings, balconies, shelves, chajja, lintels, bands, plain window sills, staircase & spiral stair cases above plinth level upto floor five level excluding the cost of centering , shuttering finishing and reinforcement, with 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) In Slab |
| 24 | Foundation, footing, bases of columns, etc for mass concrete |
| 25 | Supply, fitting and fixing good quality well dressed and well seasoned sal wood work in chaukhats in doors, windows opening…. Including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I. |
| 26 | Supplying, fitting and fixing 38mm thick good quality well dressed well seasoned wood fully paneled shutters (frame made of Sal wood and panels of Sisum wood) in doors and windows with 25mm thick panels with one side plain and other side chamfered with oxidised iron fittings such as hinges sliding door bolts tower bolt handles or rings, hooks and eyes cleats , sand blocks as per schedule taxes and royalty all complete as per building specification and direction of E/I. |
| 27 | Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formaldehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 28 | Supplying, fitting and fixing 30mm thick solid core type non decorative singleleaf flush shutters in doors and windows with block board core blendedwith high quality pehnol formal dehyde synthetic resin both side commercial veneered of standard makewith oxidised ironfittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 29 | Supplying fitting and fixing oxidised iron fittings of approved quality and make to doors and windows all complete as per building specification and direction of EI 100 mm butt hinge |
| 30 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
| 31 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape placed in position and fixed in R.C.C. slab/ beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by deppt.) |
| 32 | Supplying, fitting and fixing fully glaxed steel door, windows or ventilations of standard rolled "Z" and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick palin glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I. |
| 33 | Providing Tor steel reinforcement of 8 mm |
| 34 | 10 mm |
| 35 | 12mm |
| 36 | 16mm |
| 37 | Providing Tor steel reinforcement of 20mm and 25mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (Only valid for SAIL & TATA Steel) |
| 38 | Supplying, fitting and fixing 250X20X6mm L type M.S. clamp properly fishtailed, including making holes and setting the same in 250X125X75mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building speicfication and direction of E/I. |
| 39 | for Grading I (40mm Nominal Size) |
| 40 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 41 | Providing 50 mm thick cement concrete flooring 1:2:4 with 20 mm to 6 mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing , taxes, royalty all complete as per building specification and direction of E/I. |
| 42 | Extra for Providing and fixing 30x4mm glass strips in joints of flooring, complete job as per specifications and direction of E/I. |
| 43 | Providing and laying hydraulically machiine pressed terrazo tilles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm, thick bed of lime mortar (1:1:1) (lime: surkhi: sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, roualty and taxes all complete as perbuilding specification and direction of E/I. (c) any light colour with 100% white cement |
| 44 | Providing and laying hydraulically machiine pressed terrazo tilles 20mm thick in skirting of approved texture with 4 mm down marble chips of approved shade, size and quality, over 12mm thick cement palster (1:3) base with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, roualty and taxes all complete as perbuilding specification and direction of E/I. (c) any light colour with 100% white cement |
| 45 | Providing and laying 25mm thick kota stone in risers of steps, skirting and pillars of approves size, texture and colour laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, royalty and taxes all complete as perbuilding specification and direction of E/I. |
| 46 | Providing and laying 6mm precast white glazed tiles in walls over 12mm, cement mortar (1:3) and jointed with gray cement slurry, flush pointed with white cement including rubbing, polishing and cost of curing, taxed and royalty all complete as per building specification and direction of E/I. |
| 47 | Providng 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curingwith all leads and lifts of water, scaffolding taxes and royaltyall completeasperbuildingspecificationand direction of E/I. |
| 48 | Providng 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 49 | Providing 6mm thick cement plaster (1:4) in ceiling with celean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 50 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I |
| 51 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. |
| 52 | Structural Steel work in single section, fixed with or without connecting plate, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. |
| 53 | Providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required, scaffolding washing floors and taxes all complete as per building specification and direction of E/I. |
| 54 | Providing two coats of oil bound distemper ofapproved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 55 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered syrface bv rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, sacffolding washing of floors and taxes all complete as per building specification and direction of E/I, |
| 56 | Providing two coat of snowcem of approved shade and make over a coat of cement of primer on new surface mcluding preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I. |
| 57 | White washing three coats over new surface in ceiling. |
| 58 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt scales , smokes grease and sand paperingincluding cost of scaffolding and taxes all complete as per building specification and direction of Engineer incharge. |
| 59 | Providing french spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed french polish including cleaning the surface after removing dirt scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 60 | Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. |
| 61 | Colour washing two coats over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mash marks with jhama rubbing scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I. |
| 62 | Open graded premix surfacing: Providing laying and rolling of open graded premixed surfacing of 20 mm thickness composed of 13.2 to 5.6mm aggregates either using penetration grade bitumin or cut back or emulsion to required line, grade and level to serve as wearing course on apreviously prepared base including mixing in a suitable plant, laying and rolling with a smooth wheel roller 10 tonne capacity finished to required level and grades. Mechanical method using penetration grade Bitumin as HMP of appropriate capacity with less than 75 tonnes/Hrs |
| 63 | Seal coat (providing and laying seal coat sealing the voids in a bituminus surface laid to the levels grades and cross using Type A and Type B seal coats). Case II Type B (providing and laying of premix sand seal coat with HMP of appropria |
| 64 | Painting lines, dashes----- on roads in two coats on new work (painting lines, dashes arrow ete on roads in two coats on new work with ready mix road marking paint confirming to IS 164 bituminious surface including cleaning the surface of all dirt dust and other forigen matter demarcation at site and traffic control. Upto 10 cm in width. |
| 65 | Road marker/road stud with plastic body of RPM/ASA/HIPS as per clause 804.2.1 of MORTH fitted with lens reflectors installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in suitable bituminious grout or epoxy mortar , all as per ...confirming BS 873 part 4 1973@ 6.00m c/c2 rows. |
| 66 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 67 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) |
| 68 | Providing and applying tack coat with bituminus emulsion pressure distributer at the rate of 0.20 kg per sqm on the prepared bituminious granular surface cleaned with mechanical broom |
| 69 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cemnt: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 70 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 71 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 72 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 73 | Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete (0.80mm thick with zinc coating not less than 275gm/m2) |
| 74 | Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.8 mm thick with zinc coating not less than 275 gm/Sqm. |
| 75 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 76 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A. 110 mm dia |
| 77 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A.110 mm shoe. |
| 78 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter. |
| 79 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 80 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 81 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). |
| 82 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 83 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets &Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. |
| 84 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge |
| 85 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 445 |
| 86 | Providing and Fixing soil ,waste and vent pipe: 75 mm dia sand cast iron socket & spigot pipe |
| 87 | Providing and fixing M.S holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone sggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc. |
| 88 | 15 mm dia nominal bore |
| 89 | 20 mm dia nominal bore |
| 90 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931. |
| 91 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 92 | With 20x20 mm square bar |
| 93 | Circular shape 560mm internal dia. |
| 94 | Making soak pit 2.5 m diameter 3.00 m deep with 45X45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay FPS (non moduler) brick of class designation 75 |
| 95 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other ISS approved make with 100mm H.C.I "P" trap 15 litres C.I pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I. or CC brackets 32mm alkathene/PVC telesopic flush, pipe about 2M long with one brasscoupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50gm, 15mm PVC connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 510 mm long with 12.5 lit low level PVC cistern |
| 96 | Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of "Hindustan "Parry" or any other approved ISS make with 5 liters capacity C.I automatic fulsiing cistern of reliance for any other ISS approved make with all fittings with CI or RS brackets, standare size GI flush pipe with fitting clamps, 15mm C.I. brass spindle stop cock of approved quality weight not less than 400gm, 15mm PVC / Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paintover a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. |
| 97 | Supplying, fitting and fixing vitreous white glazed earthen ware E.W.C of parry Hindustan or any other ISS approved make with I.S.S make including supplying and fixing15 litres C.I Mosquito prroof low down flusing cistern of approved make with complete fittings with C.I handle and R.S of bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved qaulity weight not less than 450grams 15mm P.V.C alkanite pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of commander /cuckoo or other I.S.S make with hinges or screws etc,. paintingpipes and cistern with two coats of approved paint over a coat of red oxide priming all complete as perspecifictaion and direction of E/I with P trap 12.5 liter low level C.I cistern |
| 98 | Supplying, fitting and fixing vitreous white glazed earthen ware wah hand basin of parry or Hindustan or any other ISS approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 gm, 32mm PVC waste pipe 750mm long wtih brass coupling at one end and making plumber joints etc. all complete as per specification and as per direction of E/I. |
| 99 | Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 100 | Supplying tools and making connection of new G.I. distribution branch 15 mm to 50 mm dia with existing G.I. main by providing and fixing G.I. Tee including cutting of pipe at two places and threading their ends, providing long screw and one G.I. Nipple, all complete as per specification and direction of E/I. : 50 mm dia pipe |
| 101 | Providing and fixing brass/C.I. Stop cock of approved quality all complete as per specification and direction of E/I. 15 mm dia pipe |
| 102 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 103 | Providing and fixing male ended 15 mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I. |
| 104 | Group C |
| 105 | Wiring for twin control light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with 2 way modular type switch, modular plate, suitable size of GI box etc as required. |
| 106 | S/F Ceiling Rose :- Supplying and fixing 2pin 5 amp ceiling rose on the existing junction box /wooden block including connection as required etc. |
| 107 | Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 108 | Supply, fitting, fixing and testing of 1200mm Sweep, double ball-bearing, 2 canopy ceiling fanincluding connection with 1.5 sq mm copper wire, down rod all accessories as required. |
| 109 | 20w/22w LED tube |
| 110 | Supplying and fixing batten/ angle holder including connection etc. as required. |
| 111 | 10 Watt LED Bulb |
| 112 | 75/80w LED Post top lamp opel |
| 113 | 12" (300mm) Exhaust fan |
| 114 | Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required. |
| 115 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required. |
| 116 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 117 | Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. |
| 118 | Earthing with G.I. earth pipe 4.5mtr. long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required. |
| 119 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required. |
| 120 | Supplying and laying 25 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc. |
| 121 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 122 | Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 123 | Providing and fixing G.I. tape20mm x 3mm thick on parapet or surface of wall for lightning conductor completeetc. as required (horizontal run). |
| 124 | Providing and fixing G.I tape20mm x 3mm thick on parapet or surface of wall for lightning conductor completeetc. as required (vertical run). |
| 125 | Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. |
| 126 | 4 Way (4 + 12), Double Door, Horizontal type |
| 127 | 6 Way (4+18) Double Door, Horizontal type |
| 128 | 4R X 16 sq. mm + 2R x 6 sq.mm Earth Wire |
| 129 | 2R X 4 sq. mm + 1R x 4 sq.mm Earth Wire(Sockets) |
| 130 | 2R X 2.5 sq. mm + 1R x 2.5 sq.mm Earth Wire(Switch Boards) |
| 131 | Gyser |
| 132 | Water ATM |
| 133 | CENTRAL AC |
| 134 | Supply of 16 M high mast shaft in two sectionssuitable for wind speed 50m/sec. with head frame, luminaries carriage suitable to install 8 nos. luminaries in symmetrical arrangement, lightning finial along with the other accessories like double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box etc. |
| 135 | Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates |
| 136 | Supply of Twin dome aviation obstruction light TLL Make APUS 3.0 LED |
| 137 | Erection & commissioning of the 16M high mast with the help of suitable equipments |
| 138 | Design & casting of suitable shallow foundation with M-20 concrete for the 16M high mast considering the safe soil bearing capacity at site 10T/sq.mm at 2 metre depth |
| 139 | Supply of Transrail lighting limited make 200W LED flood light fittngs, CRI:70, CCT: 5700K, SPD 4KV, 100LPW |
| 140 | Supply of 7M hot dip galvanised Octagonal pole with 70mm top dia.A/F, 130mm bottom dia. A/F, 3mm thick HT sheet, 200X200X12mm base plate without bracket arm. |
| 141 | Supply of 1000MM long SINGLE arm standard bracket made of 48.3MM dia. Pipe |
| 142 | Installation, Testing & Commissioning of the 7Mtr. Octagonal Pole & light fitting with the help of suitable tools and plants, wiring of luminaires with all materials and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity of 10T/mtrs sq. |
| 143 | Supply of M20X600mm long TS-600 grade foundation bolts along with required templates for 7mtr ht. pole |
| 144 | STEET Light 60Watt with complete with all accessories |
| 145 | 2R X 4 sq. mm + 1R x 4 sq.mm Earth Wire(Sockets) |
| 146 | Supplying, Installing, Testing & Commisioning cost of ub-Lighting Distribution Board (SLDB Type-B) all complete with all necessary items as per direction of E/I. |
| 147 | Solar light including all fitting |
| 148 | 200 KVA |
| 149 | Cost of Enclosure, Meters, Indicating lamps, Terminal Boards etc. |
| 150 | Supply, installation, testing and Commissioning of the board. |
| 151 | 3c x 95 sq.mm |
| 152 | Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 153 | 3c x 95 sq.mm (38mm) |
| 154 | Above 35 sq. mm and upto 95 sq. mm |
| 155 | Supplying, Installing, Testing & Commisioning cost of Main Distribution Board (MDB) all complete with all necessary items as per direction of E/I. |
| 156 | Supplying, Installing, Testing & Commisioning cost of Distribution Board (DB) all complete with all necessary items as per direction of E/I. |
| 157 | Supplying, Installing, Testing & Commisioning cost of ub-Lighting Distribution Board (SLDB Type-A) all complete with all necessary items as per direction of E/I. |
| 158 | Supplying, Installing, Testing & Commisioning cost of ub-Lighting Distribution Board (SLDB Type-B) all complete with all necessary items as per direction of E/I. |
| 159 | Silent type D.G set of capacity 125 KVA with AMF Pamel IS/IES-60034-1 IS-1460 IS-13018 |
| 160 | 200 AMP. Four pole, on load change over switch in sheet enclosure with side handle operation |
| 161 | 120 sq.mm 3.5 core |
| 162 | With 12.5 lit. low level PVC Cistem |
| 163 | Flat back or standing corner (600x350) |
| 164 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I. or R.S. brackets 32mmC.I. brass waste, 15mm dia C.I. body spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 165 | Kitchen sink 600 mm x 450 mm x 250 mm |
| 166 | 100mm dia |
| 167 | 75mm dia |
| 168 | 100 mm dia (wt. 5.5 kg. app) |
| 169 | 80 mm dia (wt. 4 kg. app) |
| 170 | 100 mm dia (wt. 15.5 kg. app) |
| 171 | 80 mm dia (wt. 15.5 kg. app) |
| 172 | 100mm dia |
| 173 | 100mm dia (wt. 3.25 Kg appx.) |
| 174 | 110 mm diameter |
| 175 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 176 | 110 mm |
| 177 | 110x110x110 mm |
| 178 | 110 mm bend |
| 179 | 110 mm Shoe |
| 180 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 181 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 182 | 15 mm dia |
| 183 | 20 mm dia |
| 184 | 25 mm nominal outer dia Pipes |
| 185 | 32 mm nominal outer dia Pipes |
| 186 | 100 mm diameter S.W. pipe |
| 187 | 15 mm nominal bore |
| 188 | 25 mm nominal bore |
| 189 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 190 | Providing and fixing Coat Hook of approved quality. |
| 191 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 192 | Providing fixing testing and commissioning of cp brass shower mixer with provision of over head shower with 115 mm long bend pipe in built spout ,spout/shower selector with wall flange complete with all accessories as requried and making good the walls wherever required. |
| 193 | Providing fixing testing and commissioning of cp brass 115/63 mm long shower ARM with wall flange and pressure adjustable Shower Rose complete with wall accessories as requried and making good the walls whereever required. |
| 194 | Providing fixing testing and commissioning of cp brass 63 mm long pressure adjustable complete with wall accessories as requried and making good the walls whereever required. |
| 195 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 196 | Supplying,Storing,handling,shifting,installation,testing and commissioning of CP flxible hose,spary wall flange etc.complete |
| 197 | Providing and fixing straight type macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of Mcalpine,UK with intergral single mould sealing fins made of flexble EVA body,including bush/adoptor for use with C.I Pipe as supplied with the pan connector. |
| 198 | Septic Tank as per Detailed Attached |
| 199 | Passenger lift |
| 200 | STP Plant (Supplying, installation, testing and commissioning of STP/ETP of appropriate technology including Civil Works, Tertiary Treatment etc. for the Building/ campus) |
| 201 | Horticulture Works |
| 202 | Sand |
| 203 | Chips |
| 204 | Metals |
| 205 | Cement |
| 206 | Steel |
| 207 | Bricks 1000Nos. |
| 208 | Add 12% GST (in basic rate must enter 12) |
| 209 | Add 1% Labour Cess (in basic rate must enter 1) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
