Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Appendix A: Civil Works |
| 2 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 4 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 5 | 26.45:Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. |
| 6 | 9.66.2:Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm |
| 7 | 9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 8 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 9 | 6.1.2:Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 11 | 14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work |
| 12 | 14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 13 | 14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 14 | OD49104/2021-2022:Supplying, fabricating and fixing in position wooden panelling on ceiling and walls, the panels are crafted from 12mm thick marine plywood(BWS IS no 710) of manufactures century/greenply/kitply/equivalent plywoods after cutting, shapping the plywood to the required shape as per requirements and fixed on frame work made of 25x25mm GI sections using 25mm GI screw, facia decorated with 4mm thick teak veneer century plywood or equivalent(exact colour and shade to be got approved by the client) and bonded on marine plywood using Fevicol SR, including providing grooves 4mm on panel facia. The rate includes cost and conveyance of all the materials, all labour charges etc. complete (Ref. No. 9.32, 9.33, 9.112,9.37, 14.70 of DSR 2016) |
| 15 | OD49105/2021-2022:"Supply and Installation of Anutone/ Armstong/ saint gobin or equivalent Pixel Taper perforated GFR (glass fiber reinforced) gypsum panels backlined with acoustical fleece - Pixel Taper having 3x3mm square perforations @ 8.33mm pitch - 10.2 % open area, of size 1200x2400x12.5mm thicktapered edge along the length having base density 800Kgs/m3, weight 10 Kgs/m2 which is fixed by using concealed ceiling system.The concealed ceiling framework system shall include GI Wall channel(WC22) having thickness 0.45mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then suspend Main channels(MC45) having thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at every 1200mm centers with Suspender angle(SA25) having thickness 0.45mm, unequal flanges of 25 & 10mm. GI Cross channel(CC25) having thickness 0.45mm, length 3600mm, knurled web 50mm, depth of 25mm and equal flanges 9.5mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. The tapered long edges of the gypsum board to be finished with Acoustical jointing compound(AJC) and jointing tape. " |
| 16 | OD49102/2021-2022:Providing & fixing false ceiling/wall panelling with 4mm thick Aluminium composite panel of approved quality in aluminium frame work with necessary scerws etc complete . (frame work to be paid separately) |
| 17 | OD49107/2021-2022:Providing and fixingArmstrong Optra acoustic wall panelling/ Anutone Stretch NRC wall fabric or equivalent with square end made of wooden base 10mm thick and fibre glass substrate 25 mm thick and wrapped on the front side with an acoustically transparent and fire resistant fabric of approved colour of size 600x2100 mm providing a minimum sound absorption level of 0.90NRC , fixing the panels to walls using necessary adhesive with necessary screws, cost and conveyance of all materials and labour charges etc complete. Wooden base 10mm is first installed on the wall along the marking lines with metal fasteners inserted at 300mm centers . FS15 tracks to be installed on wooden base, after applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkleswith the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 100mm less. |
| 18 | OD49108/2021-2022:"Supply & installation of TOPAKUSTIK /ARMSTRONG or equivalent made of pinewood E1 grade fiberboard, Melamine laminated finish, groove perforated slats L16-2 - (2mm Slats @16mm pitch) backlined with blackacoustical fleece, tongue-groove edge for a seamless look, Non FR grade, of size 128x2440x16mm thick having base density 800Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel (CC25) having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centers.Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC10 with the help of fasteners at every 400mm centers. Slats of size 128x 2430x16mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs bothways.Panels shall be backlined with acoustical infill of poly fibre wool 5x25mm thick adhered to the wall using adhesive." |
| 19 | 12.54.2:Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing \"C\" wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of sixe38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets.Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used.All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring \"T\" with :GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. |
| 20 | OD49106/2021-2022:Supplying and fixing washable nylon loop pile carpet to floor using necessary adhesive, cost and conveyance of all materials and labour charges etc complete. |
| 21 | OD49103/2021-2022:Providing and fixing calcium silicate board for closing the window portion for fixing the board etc complete as per the direction of departmental officers in charge |
| 22 | OD111417/2021-2022:Supply and installation of training chairs as per below specifications :Backrest made up of PP-D120 MA (80%) + LFT 50(20%). Frame upholstered with mesh Fabric. Backrest size 385mm (H) x 438mm (W). Backrest is tiltable.SEAT:The seat is made up of 12mm thick hot-pressed plywood and moulded seat foam upholstered with fabric. Seat size 460mm (L) x 455mm (W) 50mm (T)SEAT FOAM: Foam made from moulded polyurethane foam. RETRACTABLE ARMS: The armrest can be moved back and forth. Armrest size 255 mm(L) x 67mm(W) BASE: Metal under structure made of 30x20x1.6mm tube with glides and powder coated in black. Chair can be folded. TABLET: Made of PP & supported by die casted base on 12x12mm sq bar. Tablet can be folded sideways when not in use. Seat fabric: Made of 100% polyester and 275GSM.BACKREST MESH is made of 100% polyester and weight of 500gms/m. |
| 23 | OD113967/2021-2022:Supply & installation of smart back revolving chair the seatand back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be ofdensity 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression.The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The fixed ring armrests is made of polypropylene .The mechanism of the chair shall have following features : 360? revolving type, Synchro 1 mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestal shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Heightfrom ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards |
| 24 | OD114070/2021-2022:Labour engaged for shifting the materials like samples, furniture, etc... and rearranging the same after completion of work as per the direction of Engineer in charge |
| 25 | Appendix A: Electronics Part - \"A\" - Studio & Control Room |
| 26 | Integrated Live Studio Production Control System: A well-Integrated studio production switcher to create multi-platform productions and on-demand with complete control over production, streaming, recording, and media publishing operations. NDI integration of cameras for video, audio, and data transmission over IP. Real-time publishing and streaming to channels like Facebook, YouTube, etc. Mix and Match video inputs and outputs. Multi-channel recording and internal storage. Multiview output for preview of all source and virtual set. Video playback without any additional hardware. Integrated multi-channel audio mixer for internal and external audio sources. Integrated Live Set technology with live virtual sets. Hardware control panel for switching. SDI Video Input: Minimum 4x NDI and HD/SD-SDI connections, SDI Video Output: Minimum 2 x independently configurable NDI and HD/SD-SDI, Monitoring: Minimum 2 Multiview displays with configurable workspaces and viewports, Media Player: Minimum 2 x media players, Keyers: Minimum 8 x input keyers, Virtual Sets: Integrated virtual set software, Storage: internal storage |
| 27 | Production PC with Input Cards & Scan Convertor:Small format PC, with Intel Core I3 CPU of 8th Gen or later, 16Gb DDR4 Ram, 1Tb SDD/M2/NVMe. Licensed Windows 10 Pro OS,Built-in Gig LAN support; With 22\" or larger Monitor, OEM Keyboard, Mouse and PCLe Interface card (Compatible with 4, 8 and 16 lane PCI Express slots) to Record uncompressed 10-bit video from SDI and HDMI video sources. SDI Video Input 1 x 10-bit SD/HD switchable. SDI Audio Input 8 channels embedded in SD and HD. HDMI Video Input 1 x HDMI 1.4 type A connector. HDMI Audio Input 8 Channels embedded in SD and HD. Converts DVI input to SDI and HD-SDI video output. Operator can select specific areas of the video input to send to the output. Supports VGA and HDMI I/O with optional adapters. |
| 28 | Virtual Studio Backdrop Set: This item shall work seamlessly with the offered studio production switcher at serial 1.01 above. Virtual tools to turn the studio space into an authentic studio atmosphere. Customisation tools to design and match brand, style, and colour scheme, or import a custom backdrop, for the live production. Integrated Live Sets with 30+ live virtual sets and box effects to be included. |
| 29 | Audio Mixer: Supply of audio mixer having minimum 10-Channel Line Mixer with Priority input. It should have a minimum of 6 Combination inputs with MIC, Phantom and Line selector switches. Shall provide minimum 3 mono and 3 stereo RCA Inputs. There shall be a Mic monitor 1/4” output for private listening of all mic inputs. It should also have Balanced XLR line outputs. Must have 1/4” line output, to feed audio to an external recording device.It shall also have a Priority (Mic 1)Control Master and Individual level controls. Rack mounting kits etc to be supplied. |
| 30 | Studio-grade Camera with Batteries & Charger:Single 1/2.3-inch or larger CMOS image sensor with more than 12 million pixels. Professional studio-quality integrated 12x, with zoom lens of 29.5-354mm (35 mm equivalent). HD Dynamic Zoom combines both optical zoom and pixel mapping to create seamless and lossless zoom. Support for 4K Ultra HD recording (150 Mbps, 24/30 fps) on SDXC(Two UHS-I Speed class-3 cards to be supplied) card. 4:2:2 Full HD recording at 50Mbps (24-60 fps). 120 fps recording for smooth slow motion. Live 4K UHD output via HDMI connector. 2 position ND filter (1/4, 1/16). Built-in stereo microphone. Audio handle with 2 XLR connectors. Dual SDHC/SDXC slots enable dual, backup and continuous recording. 3.5-inch or larger colour LCD/LED/OLED display with smart focus assist function. Shall be provided with Rechargeable lithium-ion Battery Pack with charger, for portable non-studio use. |
| 31 | Tripod Stand: Supply of aluminium or SS tripod having fluid pan and tilt head with a floor spreader. It should have a torque for good control. It should have a minimum payload support for over 7 Kgs. It should consist of a sliding plate having a range of at least 40 mm. The tripod shall have a height of at least 60\" and easily portable with its entire contents of not more than 10 kgs. |
| 32 | Stand Alone Teleprompter: Full own video or textual speech supported Teleprompter Kit, with Remote & Carrying Case, ideal for studio Camera application, suitable for all popular Android, Apple iPad tablets from 12” to 15”, with its camcorder and DSLR camera mounting kit. It shall have removable riser blocks for centring adjustments. To be supplied with a strong and rigid prompter frame that fixes securely to the offered tripod quick release plate. Prompter frame shall be designed to allow standard, or below-the-lens prompting. Flexible OEM mounting bracket to allow, simple but secure installation of the offered compatible 12~15\" tablet. |
| 33 | Tablet with Touch Control: 256GB iPad Air, having support to both WiFi and 4G cellular support, with Original OEM Smart Cover, Apple Pencil, associated cables, IOS, and all software loaded. |
| 34 | 32\" Display for MultiViewer: Supply of 32\" display for Multiview with full HD resolution having D-SUB, DVI-D, HDMI ports, and Composite Video Input RCA. Should have a brightness of 300 nits, Contrast Ratio of better than 5000:1 and operating hours of 16/7 with a viewing angle of 178/178 with built-in speakers. External Control either thru RS-232C or thru stereo jack / RJ45. |
| 35 | 55\" Display for Studio: Supply of 55\" display for Multiview with full HD resolution having D-SUB, DVI-D, HDMI ports, and Composite Video Input RCA. Should have a brightness of 300 nits, Contrast Ratio of better than 5000:1 and operating hours of 16/7 with a viewing angle of 178/178 with built-in speakers. External Control either thru RS-232C or thru stereo jack / RJ45. |
| 36 | Flat Screen Display Trolley / Stand: Supply of trolley stand for the 55\" display with non-marking 4” locking/braked castors & alternative levelling feet. It consists of Safety screws help prevent unauthorised screen removal. Shall have display mount support to 65\" over a VESA fixing of 600 x 400. |
| 37 | SDI-HDMI Converter:Supply of SDI to HDMI converter having min 1xSDI, HD , 6G-SDI. It should have min 1xSDI Video loop output. It should have 1xHDMI compatible connector. It should also have min 2 channel of balanced analog audio and min 4 channels of AES/EBU digital audio outputs. |
| 38 | Wireless Microphone: Supply of Omni-directional microphone for studio-grade speech intelligibility and having broadcast sound quality. To be supplied with clip-on microphone. Shall have a minimum pickup range of over 50 metres and an operating time of at least 8 hours. It should have a wide bandwidth of over 40Mhz. Sensitivity should be less than 1.6 microvolt or better. Should have a signal to noise ratio greater than 110dbA. Should have larger AF response of 100 – 18,000 Hz, Line: 50 – 18,000 Hz. |
| 39 | In-ear Monitoring System: Supply of In-ear monitoring system with synchronization between transmitter and receiver via infrared. Can receive upto 16 compatible channels. Should have wide frequency bandwidth of over 40 MHzIt should have a pickup range of over 50 mtrs and should have power of 40 ~ 50mW. Current consumption is 350 mA. Shall have a wide AF frequency of 25Hz to 15kHz. |
| 40 | Audio Monitoring System: Supply of 2-way, powered studio monitor having minimum output of 50W. It should have a frequency response of 50Hz-24KHz. |
| 41 | Video Recorder: Supply of File-based 1RU recorder, having a min 10-bit sampling rate at a refresh rate of 4:2:0. It shall be capable of downloading video directly on any compatible storage modules. It shall support up/down and cross conversation and video formats of 1080i, 1080p, 720p. To be supplied with 10/100/1000 Ethernet (RJ-45) and field replaceable/removable 1TB storage having at least one USB 3.0 port.Offer shall have Redundant Power Supply and Data Loss Prevention (DLP). |
| 42 | 1TB SDD/Flash Storage Module: 1TB SDD/Flash Storage Module with USB 3.0 or above connection. Minimum SSD Storage Specs: Product Type Solid State or Flash Drive, Minimum Capacity 01TB, Sequential Read Speed – At least 540MB/s, Sequential Write – At least a Speed of 520MB/s or more. To be compatible with the offered Video Recorder. |
| 43 | Broadcast rated Main Distribution Unit: Supply of Main Power distribution system with Input Connectors of 20A, \"loop-out\" & 15x 10A IEC Outlets. Support for 19\" Horizontal Rack mounting with IEC Sockets. All outputs shall be numbered on front and rear for easy identification and a designation- strip holder with Snap-On cover is fitted on the front panel. Individually fused sockets with individual neon indicators. |
| 44 | Equipment Mounting in Rack: Supply of standard 19\" rack compatible 6 x TVSS enabled PDU strip, cable manager, one tray etc for existing 27U floor rack. |
| 45 | Equipment Rack: Supply of standard 19\" rack having minimum 15U height, front glass and a cage nut type rack chassis with at least 6 x TVSS enabled PDU strips, VESA of 800mmx800mm, cable manager, two trays, and two fans. |
| 46 | Video Editing Section |
| 47 | Video Editing Workstation:27-inch Retina 5K display,12-Core, 3.3GHz Intel Xeon W, 12 cores, 24 threads, Turbo Boost up to 4.4GHz, 31.25MB cache, populated with 32GB of 2933MHz memory, Radeon Pro Vega II, 64 graphics processor with 16GB of HBM2 memorywith 8GB of GDDR6 memory, 02TB SDD Storage, Magic Keyboard - US English - Silver, Magic Mouse with Trackpad, VESA mounting kit, AppleCare+ for iMac (2nd-year warranty), and Professional SDD with 8TB For temporary backup and live editing in RAID 1 Configuration, Thunderbolt 3, 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector), PSU, fully licensed Max OS, all associated project cables etc |
| 48 | Portable Workstation: Apple M1 chip enabled laptop with 8-core GPU, 16GB unified RAM, 512GB SSD, 30W Fast charger, travel kit, Magin Keyboard and Mouse, etc. SSD Storage: Product Type Solid State or Flash Drive, Minimum Capacity 512 GB, Sequential Read Speed – At least 540MB/s, Sequential Write – At least a Speed of 520MB/s or more |
| 49 | Editing Software Suite with Perpetual License: Non-linear Video Editing Software, Apple Final-Cut-Pro-X. |
| 50 | Designer Tablet. 12.9-inch Tablet with iPad OS, Apple M1 chip, 512 GB Storage, Built-in WiFi, 40.88-watt-hour rechargeable lithium-polymer battery. To be supplied with original OEM smart-folio cover. |
| 51 | Over the Ear Headphones: Over the ear headphones with noise cancellation capability, wide frequency bandwidth of over 10-25000Hz. It should have an SPL of over 110 dB or better. Should have a max input power of 500mW with nominal impedance of 64 ohms. |
| 52 | Audio Monitoring : Supply of 2-way, powered studio monitor having minimum output of 50W. It should have a frequency response of 50Hz-40KHz. |
| 53 | Professional Video Monitor:Support for Broadcast Signal Monitoring to include, new inputs, camera calibration functions etc. Supply of Multi-format video LED/IPS monitor 24\" having minimum 02-megapixel resolution with an aspect ratio of16:9 or larger. It should have a tri-colour tally with display of waveform, vectorscope and histogram. Should have a minimum brightness of 400 cd/m2 with a contrast ratio of 1000:1. For connectivity needs, it must have either an SDI, or HDMI input. |
| 54 | Storage Section |
| 55 | Networked Video Storage: Supply of 2U, Rack mountable 12-Bay, Enterprise NAS, having either Dual 10G RJ 45 Copper or 4 x Gigabit LAN ports, Quad Core Intel Xeon or I3 CPU with minimum configuration of 3.5GHz or higher, 16Gb or more RAM, Must support enterprise SATA/SSD 2.5” or 3.5”. Support for RAID-5, 6, & 10. To be populated with 10TB or larger HDDs for form a RAID configured drive with a minimum usable space of 72 TB, after RAID-6 or RAID-10 or RAID-50. |
| 56 | Enterprise Hard Disks: 10TB Enterprise or Datacentre rated SATA 6Gb/s rated HDD with 256MB Cache having Read Speed of over 210 Megabytes Per Second or Pro rated SDD with higher specs |
| 57 | Studio Lighting Section |
| 58 | Studio Lights: Supply of 120 watts LED light/panel with Diffuser, Colour temperature:2700-3000 K, Dimmer : 0-100%, Power Factor : >0.9. Barndoor, safety bond, c-clamp & Light stand etc. |
| 59 | Chroma Screen: Supply of Green Chroma Screen Wooden frame -Approx 700 Sq Feet |
| 60 | Cable Section (Quantities, Connector Interfaces, as per Site & based on Offered Bidder Solutions) |
| 61 | Supply and fixing 20 mm medium PVC conduit (Ivory/ Suitable for wall color) with specials-conforming to ISI standard on surface using suitable size fixtures-spacing not exceeding 60 cm-including making good the damage, colour wash etc as required. |
| 62 | Supply and fixing 25 mm medium PVC conduit (Ivory/ Suitable for wall color) with specials-conforming to ISI standard on surface using suitable size fixtures-spacing not exceeding 60 cm-including making good the damage, colour wash etc as required. |
| 63 | Supply and installation of 6 Core MMF through existing conduits |
| 64 | Sypply and installation of Cat 6A Cable through existing conduits |
| 65 | Integration with Core Switch, Configration, Programming etc |
| 66 | Supply and Installation of CAT 6A Information outlet(Flush mount) |
| 67 | Supply and Installation of 19\" 6 port rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with required number of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made upof flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, necessary pigtailsetc. Including splicing charges. |
| 68 | Supply & providing SC-LC duplex patch cord 1 mtr. |
| 69 | Supply and Installation of 24 port patch pannel fully populated with CAT 6A I/o Module |
| 70 | Supply and installation of 1m CAT 6A patch cord |
| 71 | All Studio Related Works - On Turnkey Basis with Three-Year DLP |
| 72 | Supply, Electrical & UPS Cabling, Equipment Installation, Testing, Customisation, Configuration, Programming, Testing, Documentation, Commissioning and Handing Over Charges. The project must be handled by a CTS qualified engineer. |
| 73 | Part - \"B\" - Multi-Purpose Class Room - Audio Section |
| 74 | Ceiling Speaker: Supply of 2-way Ceiling speakers having power wattage of minimum 50W @ 8 ohms impedance, having better than 65 Hz – 20 kHz bandwidth, with 100° to 120° angle of coverage, having SPL level between 90-100 db@1m with dedicated LF and HF drivers. |
| 75 | Wall Speaker:Supply of Wall Speakers having 50W power handling in 8 ohms impedance, with a frequency response of at least 70Hz - 20kHz, having a sensitivity of better than 85db@1m, coverage angle of 100 x 100 degrees, SPL of over 100db @ 1m, with dedicated LF and HF drivers. |
| 76 | Amplifier:Supply of Class D Amplifier having wattage of minimum 75W at 8 ohms impedance per channel having a signal to noise ratio of minimum 100 dB frequency response +/-0.5dB at 1W into 8 ohms, voltage gain of 25dB, crosstalk greater than 55 dB.As the offered amplifier also need to supplement the local & Far end audio refinement with Soft VC, it shall at least have 08 Channels to control the output effectively with feedback. |
| 77 | DSP Mixer: For mixing local analogue inputs from the digital audio bus. AEC and NC shall be provided per AEC algorithm. The DSP must have a minimum of 10 AEC input and 08-line audio out. There shall have an inbuilt or external USB interface for routing the audio for soft VC. Shall support a tail Length of minimum of 200 ms and a frequency response of 20Hz-20KHz. To support cascading of additional digital mixer over a CAT 6A cable up to minimum 100m.Must have Control ports of IT or RS 232 or LAN. THD: <0.01% 20Hz to 20KHz, +10dBu output, Crosstalk: <-75 dB, Open architecture software configurable, Separate logic processing power, 2 digital audio bus RJ 45 Port, 1 Ethernet port for configuration, Capable to handle +5V unloaded logic output voltage, Capable to control 3rd party devices with TCP IP and RS 232, Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should support 48 or more digital audio Channel Bus. |
| 78 | Volume Controller: Supply of volume controller powered with PoE and with backbox. PoE Injector based solutions are not acceptable. |
| 79 | Gooseneck Microphone : Supply of modular Gooseneck Microphone with a minimum goose length of 30 cm. Shall support on/off switch with LED indicator. Must support immunity to RF frequency. Shall have a cardioid pattern. Shall have wide Audio Frequency bandwidth of 70 Hz to 18 kHz or larger, Equivalent noise level <25 dB-A, Sensitivity 20 mV/Pa, Signal to Noise>73 dB-A or better, Electrical impedance 600 Ohms. |
| 80 | Wireless Handheld Microphone: Supply of Wireless Handheld Mic set having receiver having wider AF bandwidth of at least 40 Hz ~ 20KHz and 8 compatible channels on one band. The transmitter shall have a super-cardioid polar pattern, Signal to noise 105 dB-A,Audio bandwidth: 70 – 20,000 Hz. |
| 81 | Wireless Lapel Microphone: Supply of Wireless Lapel Mic set having receiver AF bandwidth of 40 – 20000 Hz or larger and 8 compatible channels on one band. The transmitter shall have an on/off and mute switch with max audio level of 12dB, Wider AF bandwidth of 40 –20000 Hz or larger, Signal to Noise of 105 dB-A or better. A clip-on microphone is to be also included. |
| 82 | Display Section |
| 83 | 98 inch UHD Touch Display: ply of 98 inch UHD professional LED display with touch overlay. Display Resolution of 3840x2160. Interactive, 10 touch points feature for writing & pen operations. Screen sharing over WiFi. Touch Technology: Infrared, Interface: USB Recognition, Touch Durability: Unlimited, Redundancy: Fault tolerance for 10% damaged tubes, Supported OS: Windows 7/8/10, Mac OS X, Linux, Operating Temperature: 0 °C to 60 °C, Operating Humidity: 10% to 90% RH, non-condensing, Touch Accuracy: 5mm, Touch Method: Finger, Gloved hand or Stylus or any other pointer. Touch Activation Force: No pressure, Toughened glass of minimum 3mm. Screen sharing over WiFi. Shall have HDMI / DP / DVI-D, Audio and USB ports for the connectivity needs without any additional interface. Shall support HDCP 2.2 or later. Shall have brightness of 500 Nits or better & a minimum contrast of 1200:1 with viewing angle of 178x178. Shall support either RS 232 or USB or LAN for controls. Touch Frame Color Black powered-coated. To be supplied with compatible digital Pen. |
| 84 | 55\" Side Display:Supply of 55 inch UHD display with Resolution 3840x2160.Shall have HDMI / DP / DVI-D, Audio and USB ports for the connectivity needs without any additional interface. Shall support HDCP 2.2 or later. Shall have a brightness of 500 Nits or better& a minimum contrast of 1300:1 with viewing angle of 178x178.Shall support either RS 232 or USB or LAN for controls. |
| 85 | Wall Mounting Swivel Brackets: Wall mount swivel brackets for 55\"Display |
| 86 | 86\" Touch Interactive Display: Supply of 86 Inch Touch having resolution 3840x2160.Shall have HDMI / DP / DVI-D, Audio and USB ports for the connectivity needs without any additional interface. Shall support HDCP 2.2 or later.Interactive, multiple touch feature for writing & pen operations. Screen sharing over WiFi. Since the staff and students are expected to work close to this screen, it shall have a brightness of 320 nits or higher and contrast ratio of 1200:1 with viewing angle of 178x178.Shall support either RS 232 or USB or LAN for controls. To be supplied with compatible digital Pen. |
| 87 | Wall Mounting Brackets & Connectors: All mount brackets and connector interfaces on as required basis for the project. |
| 88 | Video Switching Section |
| 89 | Matrix Switcher: Supply of 8x8 matrix switcher with minimum 8 HDMI input and output with 4 HDMI Output & 4 twisted pair outputs or with a combination of 8 HDMI out with additional 4 twisted pair transmitter. Switcher shall support 3840x2160 @ 60Hz 4:4:4, HDMI 2.0 and HDCP 2.2 or later. Must support independent de-embedded audio for all inputs. Additional 8 nos Audio de-embedder should be considered, if the switcher does not have an inbuilt audio out.Shall support Twisted Pair Cable Length in full 4K signal support of over 50 mtrs. Shall have RS 232 or LAN for control application. All part codes of the switcher and accessories in single set or combination of devices. Support EDID Management. (EDID should be selected for every input or any display EDID can be mirrored to any input independently). |
| 90 | Auto Switcher with Receiver: Auto Switcher with multi-format under desk extender (Transmitter & Receiver) with minimum 3 HDMI Port for connecting laptop, Podium PC, Document camera & Minimum 1 VGA Port for any VGA Devices, Shall have minimum 1 HDMI loop out Ports& Twisted pair, Support HDCP 2.2 or later, Support resolution up to 4K60 4:4:4, USB 2.0 Distribution over Cat 6A. The receiver shall support CAT X input and HDMI Out, Support 4K, Transmit signal up to a minimum of 50 m. Receiver shall support USB (Keyboard, Mouse etc). |
| 91 | Active Wall Plate Extender: Supply of Active wall plate (Transmitter & Receiver) with HDMI input port that supports resolution up to 4K and Ultra High Definition (UHD), Transmit signal upto 50 Mtrs and the receiver shall support CAT 6A input and HDMI Out, Support 4K, with back box for mounting of the active transmitter. Regulatory Compliance RoHS, WEEE, FCC Class A, Receiver should support Audio out. HDCP Compliant. Support for POE is preferred. |
| 92 | Wallplate: Passive USB 2.0 wall plate for 86\" interactive display |
| 93 | Twisted Pair Receiver: Supply of HDMI receiver that supports 4K60 and receives audio, video, over one shielded Cat 6, Cat6A or Cat7 standard twisted pair cable up to a distance of over 50 Mtrs. Shall support HDCP 2.2, Shall have RS 232 port. Shall have inbuilt scaling. Shall support inbuilt LAN Port, RS232 & IR. Should support Audio out. |
| 94 | Wireless Presenter: Supply of Wireless Presentation System having 1xHDMI, 2 x USB 2.0 outputs and having cross-platform compatibility allowing Windows, Mac OS, Chromebook, Android and iOS devices to present. Shall have 1080p resolution and low latency video streaming. Audio Outputs HDMI & analogue via audio jack 3.5mm, Sources up to 4 simultaneously with fixed screen layout. Shall have the resources and capability to connect a minimum of 50 users over wireless. |
| 95 | Interactive Podium, Document camera & PC/Laptop Section |
| 96 | Interactive Digital Podium:Supply of Custom made, wooden Podium with 22-inch interactive monitor having provision for fixing Gooseneck microphone, Interactive Touch Panel and Presentation points & supply of 22” Interactive Touch panel, Resolution: 1920 x 1080 pixels, Aspect ratio: 16:9, Brightness: 200 Nits, Viewing angle: H: 160°, V: 160°, Video connection: HDMI / DVI-D / DP, Integrated USB interfaces.Response Time (Typical GTG) < 8 ms. Necessary adaptors and connectors are also should be included. |
| 97 | Podium PC: Core i5-8500 or later gen CPU, 8GB DDR4 RAM, 512GB SSD, Windows 10 Pro, MS Office Pro, 4 x USB 3.0 ports, Display Output of DVI / HDMI / DP. SSD Storage: Product Type Solid State or Flash Drive, Minimum Capacity 512GB, Sequential Read and Write Speed of over 520MB/s, or more. |
| 98 | Camera Section |
| 99 | Auto Lecture Tracking Camera with HDMI & USB Extender: Supply of Auto tracking Camera with Full dual-camera system, support HD 1080p 60fps with Minimum 20x optical zoom, HDMI, 3G-SDI, IP and USB video outputs, Supports PoE/PoE+ (Power over Ethernet), Supports RTSP / RTMP / RTMPS and HEVC / H.264 / MJPEG video compression. Minimum Viewing Angle for PTZ 70° & Minimum Panoramic View 100°, Focus System shall be Auto / Manual, Minimum Illumination 1.0Lux, Focus System Auto, manual, White Balance Auto / Manual, Gain Control Auto / Manual, Exposure Control Auto / Manual, Control Interface RS-232 / Ethernet, Audio Input Line In / MIC In. Tracking feature shall focus on a presenter standing on a stage or behind a lectern and tracks the speaker\"s movement across the stage area, Speaker can leave the stage to interact with the audience. There shall be no distance or connection restrictions even if the speaker is obscured by other people. Support up to 3 present zones to allow a presenter to move in a specific area. The tracking system shall automatically start tracking the presenter as soon as the presenter comes to the stage without any additional face calibration with additional PC or sensors etc. HDMI extender with support of at least 50 Mtr for Camera should be provided. USB extender for the camera for soft VC to be included. The device shall have FCC, RoHS, CE/UL certification. OEM Wall mount to be supplied. |
| 100 | PTZ Camera: Supply of PTZ Camera with minimum 20 x Zoom, 1/2.8\" 2MP CMOS, Power supplied through the PoE/PoE+ (Power over Ethernet) without additional power supply, Shall have PAN angle from -170° to +170°; Tilt angle from -30° to +90°, fast, and precise positioning movements. Support MJPEG/ H.264 / SVC video compression. System shall be Auto / Manual, Minimum Illumination 1.0Lux,White Balance Auto / Manual, Gain Control Auto / Manual, Focus System Auto, manual, Exposure Control Auto / Manual, Control Interface RS-232 / Ethernet. The device shall have FCC, RoHS, CE/UL certification. OEM Wall mount to be supplied. |
| 101 | Integrated Video Conference System. Supply of integrated conference room system with video conferencing camera, inbuilt or external ceiling microphone (as per room needs). For the optimal conferencing requirements, the offered camera shall have a minimum 2x digital zoom and aminimum horizontal field of view of 120°. It is preferred that the output shall use Universal Video Class (UVC) and Universal Audio Class (UAC) drivers. Shall support Windows®, Mac® OS,compatible with all popular open software-based conferencing applications. The camera shall provide simultaneous IP (H.264 or H.265) streaming; IP streaming video resolution shall be configurable. USB streaming resolution shall be auto-negotiate between the camera and the UC conferencing application. If the built-in Mic does not have the requisite capability to pick up clear audio from a distance of over 5 Meters, the offered solution shall have the necessary provision for connecting external wired microphones. |
| 102 | Recording & Streaming Section |
| 103 | Video Streaming Encoder & Recorder with Remote. Must support a minimum of 4 channels recording. Support 1080p 60/30fps recording. Supports minimum 4 HDMI Inputs and IP video sources including IP Cameras, and standard Streaming Protocol Pull RTSP Push: RTMP / RTMPS / MPEG-TS, TCP, UDP, HTTP, DHCP Client. Supports HDMI-embedded audio or analogue stereo audio with minimum 2 channels Audio Input mixing and gain control. Shall support minimum 3 simultaneous streaming.Shall have minimum internal or external 1 TB hard disk. Shall have support to record to external USB and FTP Server, Shall support live stream, Shall support Recording file Type MP4 (H.264 / AAC), JPEG. Serial Control RS-232 /RS-485 port, Ethernet Port 1 female RJ-45 10/100/1000 Base-T high/full-duplex, Shall support Layout Switch Single, PIP, PBP, 3 and 4 windows, layouts, overlay & background switch. The remote shall support pre-set recall & USB interface to connect USB drive for external recording for presenter. Remote shall be surface mounted on the podium.The device shall have FCC, RoHS, CE/UL certification. |
| 104 | Control Section |
| 105 | AV Controller: Supply of rack mountable AV control processor with 4 or more RS 232, Dual LAN Port, 512 MB RAM & 8 GB flash Memory. Controller shall support IPv6. Further, the controller shall have a minimum of four infrared/serial ports, Controller shall have a minimum of four contact closure ports, and a minimum of four relay ports. Shall support IEEE 802.1X standards, support X.509 Certificate services, and the Regulatory Compliance FCC, CE, and RoHS. |
| 106 | Touch Panel: Supply of control touch panel with minimum of 7 inch diagonal, Active Matrix Colour LCD, Shall have a minimum Resolution (WH) 1280x800 with an Aspect Ratio (WH) 16:9; To have a minimum Brightness 350 cd/m2 & a Contrast Ratio 600:1, Shall have Minimum 2 GB RAM & 8 GB Flash Memory. Supported Video Codecs formats. The Touch Panel must be wired and table mountable. |
| 107 | Subscription Renewal of Existing Juniper SRX 550:5-Year Security, IPS, AV, subscriptions and NBD support for existing UTM cum Firewall, Juniper SRX 550 |
| 108 | 24-Port PoE Network Switch: 24 x RJ-45 autosensing & Auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); and 4 x 10G SFP+ ports. Rack-mountable, with PoE support on all ports, Spanning Tree Protocol, Port grouping Up to 8 groups, VLAN Support for up to 4096 VLANs simultaneously, Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, Management VLAN, Private VLAN Edge (PVE), also known as protected ports, Multicast support with multiple uplinks, DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. The offered switch shall have Switching Capacity (Non-blocking) of 80 Gbps or more and Forwarding Rate (64-byte packets) - Wired-speed of 214 Mpps. Total Power Budget=370W or more. Supply and integration must also include Two 10GE (SFP 10/100/1000/10GBASE-T Copper SFP+) and Two SFP+ 10GBASE-SR. Common for both Rooms. |
| 109 | 24-Port Manageable Switch. Ports:24 x 10/100/1000BASE-T (RJ-45), Auto MDI/MDIX, and 4 x GbE SFP. 64K Packet Switching Backplane: 128 Gbps or more. Thruput: 95 Mpps (wire speed). QoS: 8 Queues or more. Support for: 9K Jumboframe, 16K MAC IDs, 4K VLANs, sFlow, 2048 Multicast IPv4 Routes, Physical port redundancy (RTG). L2 Manageability: Port-based VLAN, MAC-based VLAN, Voice VLAN, Multiple VLAN Registration Protocol (MVRP), RVI (Routed VLAN Interface), Link Layer Discovery Protocol (LLDP), LLDP with VoIP integration, Q-in-Q tunnelling, Bridge Port Extension, Spanning Tree Protocol, CoS prioritization, VLAN tagging, Rapid Spanning Tree Protocol (RSTP), Link Aggregation Control Protocol (LACP), Multiple Spanning Tree Protocol (MSTP). L3 Manageability: RIP v1/v2, RIPng, OSPF v1/v2/v3, Static routing, Routing policy, Bidirectional Forwarding Detection (BFD), Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS). Security: Port-based ACL (PACL), VLAN-based ACL (VACL), Router-based ACL (RACL), MAC limiting. |
| 110 | USB Switch with Extender:Supply, Installation and Integration of 2x4 USB switch which enables, 2 computers to share 4 USB 3.1 devices with support for extending USB link upto 50m via CAT-6 UTP cable. It must support any/all High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices. Combination device of USB Switch with Extender or separate systems with indicated capabilities also acceptable. |
| 111 | Rack & Cable Section (Quantities, Connector Interfaces, as per Site & based on Offered Bidder Solutions) |
| 112 | 32\" Floor Mount Rack with PDU, Cable Manager, Cooling fan & Additional accessories. |
| 113 | 1.8Meter HDMI Cable |
| 114 | 4.5 Meter HDMI Cable |
| 115 | 10 Meter HDMI Cable |
| 116 | USB Cables - 06 feet |
| 117 | USB activeCables - 15 Feet |
| 118 | USB active cable-50 Feet |
| 119 | Sypply and installation of Cat 6A Cable through existing conduits |
| 120 | 14 AWG Speaker Cable |
| 121 | Mic Cable |
| 122 | Supply and installation of 6 Core MMF through existing conduits |
| 123 | Supply and fixing 20 mm medium PVC conduit (Ivory/ Suitable for wall color) with specials-conforming to ISI standard on surface using suitable size fixtures-spacing not exceeding 60 cm-including making good the damage, colour wash etc as required. |
| 124 | Supply and fixing 25 mm medium PVC conduit (Ivory/ Suitable for wall color) with specials-conforming to ISI standard on surface using suitable size fixtures-spacing not exceeding 60 cm-including making good the damage, colour wash etc as required. |
| 125 | Integration with Core Switch, Configration, Programming etc |
| 126 | All Allied Project Works - On Turnkey Basis for Multi-Purpose Classroom with Three-Year DLP |
| 127 | Equipment Installation, Testing, Customisation, Configuration, Programming, Testing, Documentation, Commissioning and Handing Over Charges of Multipurpose Hall |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
