Military Engineer Services-MES has published Special Repair To Bldg No P01 To 06At Dauble Dakker At Danapur Provn Of 2 X Vehicle Parking Shed Near Stn Hq Office And Gate Pillar Incl Connected Wks At Asha School Danapur Cantt In Age Brii Under Ge Danapur Cantt. Submission Date for this Tender is 18-06-2022. Building Repair Tenders in danapur Bihar. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 and n exc 500 ltrs complete all as specified and directed… |
| 2 | M&L Brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specifed and directed. |
| 3 | Demoliton of cementconcrete in ground floor paving n exc 15cm thickness (below or above ground level ) complete all as specifed and directed. |
| 4 | Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified. |
| 5 | M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protectionfinishing even & smooth without using extra cement laid in bays with construction joint including mastic filling 1 part bitumen 3 part send complete all as specifed and directed. |
| 6 | M & L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stoneaggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed. |
| 7 | M&L joint free Coloured glazedceramic edgeless tiles (400 x 400)mm x 6- 7mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 15 mmthick screed bed or bedding layer ofcement mortar 1:4 complete all as specified and directed Note:- shade, pattern, design and laying of tiles shall be approved by GE |
| 8 | M&L for Non -Skid Ceramic colouredtiles (joint free) 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc over and including15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 9 | M&L for coloured glazed tiles (450 x 300 x 7 mm thick / 350 x 250 x 7 mm thick) as on walls set and jointing in neat slurry and pointing in coloured cement to match the shade of tilesincluding 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 10 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed |
| 11 | ~Ditto~ all as per Srl item No. 10.00 above but exc 1.5 sqm but not exc 4 sqm each |
| 12 | Taking down door shutter of any description not exc. 2 sqm each complete all as specified and directed. |
| 13 | S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed. |
| 14 | ~Ditto~ all as per Srl item No. 13.00 above but without glazing bar |
| 15 | S & F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spesified and directed |
| 16 | S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, including welding etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 17 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specifed and directed. |
| 18 | S&F factory made solid PanelPVCdoor shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thickto be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specifed and directed. |
| 19 | S&F flush shutter, 30 mm thick, solid core construction with block board core, and ply wood face panels but both face is covered with decorative face veneer with lipping complete all as specifed and directed. |
| 20 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specifed and directed. |
| 21 | S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed. |
| 22 | S & F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints complete all as specifed and directed. |
| 23 | M&L PCC 1:3:6 type C1 (20mm graded stone aggregates) as in bed blocks for hold fastsincluding necessary form works complete all as specified and directed |
| 24 | M&L for mild steel hold fasts to door chowkats and similar articles conforming to Fe-410-0 or Fe 310-0 complete all as specifed and directed. |
| 25 | M&L for forming jambs in Cement mortar 1:4 to openings (to foregoing item) including cutting, toothing and properly bonding into old work. also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr-in-Charge. |
| 26 | S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening complete all as specified and directed. |
| 27 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specifed and directed. |
| 28 | S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed |
| 29 | S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutterand incl shelves all as specified and directed |
| 30 | S&F Hasp and staple, mild steel, safetytype, stove enameled black, including bolt to hinge plate and fixed with screws of 125mm size |
| 31 | M&L for 100 mm size Butt hinges, (ISI Marked) medium weight, cold rolled mild steel complete all as specifed and directed. |
| 32 | M&L for 75 mm size Butt hinges, (ISI Marked) medium weight, cold rolled mild steel complete all as specifed and directed. |
| 33 | M&L for 150 mm long aluminium anodised barrel tower bolts extruded section and fixed complete all as specifed and directed. |
| 34 | S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked complete all as specified and directed |
| 35 | S&F Aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified and directed |
| 36 | S&F 300 mm long aluminium alloy anodised natural shade with matt finish surfaces, sliding door bolts with hasp stapple (bolt type), extruded section 16mm diabolt with steel screw complete all as specifed and directed. |
| 37 | S&F Floor door stopper 150mm overall length cover plateof aluminium body and tongue with hard drawn steel spring complete all as specifed and directed. |
| 38 | S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed. |
| 39 | S&F anodised alumnium alloy as in curtain rod including fixing brackets stops , round block including complete all as specified and directed |
| 40 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate withsteel fixing screw complete |
| 41 | Demoition of RCC/brick work water tanks on top of slab & removing the debris from site complete all as specified and directed by Engr-in-Charge |
| 42 | Dismantling of PVC water tanks exc 500 & n.exc 1000 ltrs capacity complete all as specifed and directed. |
| 43 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoistedand fixed in position all as specified in SSR Pt-Iof 500 Ltr capacity including CP tank nipple complete all as specified and directed. |
| 44 | S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 20mm-210)gms.complete all as specifed and directed. |
| 45 | Taking upor down steel tubing and connections 15 mm bore GI tubing complete all as specifed and directed. |
| 46 | Taking upor down steel tubing and connections 20 mm bore GI tubing complete all as specifed and directed. |
| 47 | S&F medium grade galvanised steel tubing with all GI fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specifed and directed. |
| 48 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specifed and directed. Note : - Old GI tubing obtaining from item No 45 shall be re-used after cleaning. |
| 49 | S&F medium grade galvanised steel tubing with all GI fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specifed and directed. |
| 50 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specifed and directed. Note : - Old GI tubing obtaining from item No 46 shall be re-used after cleaning. |
| 51 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed |
| 52 | S&F in repair15 mm bore concealed type stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia. |
| 53 | S&Fin repair angle cock 15mm cast copper alloy chromium plated screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed. |
| 54 | S & F in repair 15 two way mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union completeall as specified and directed. |
| 55 | S&Fin repair bib tap 15mm brass chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 56 | Supply and fixed in repair shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union complete all as specified and directed... |
| 57 | S&F in repair pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed. |
| 58 | S&F in repairs PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. |
| 59 | S&F in repair 15mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.. . |
| 60 | S & F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded stone aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and directed |
| 61 | S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity,low level with inlet, ball valve, float and handle including bracketsincl PVC connection with CP brass nuts on both sides complete all as specified and directed. |
| 62 | S&F in repair Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete all as specified and directed. |
| 63 | S&F in repair vitreous china wash hand basin white flat back of550x400mmincluding bracket, cutting for and pinning the ends of brackets or erecting stands also including PVC waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450 mm length with nuts on both sides complete all as specified and directed.. |
| 64 | S&F in repair brass CP tubular towel rail 20 mm dia "D" type 60 cm long between flangecomplete all as specified and directed |
| 65 | S&F in replacement of stainless steel soap dish, of standard size and shape complete all as specified and directed. Make : Parryware/Hindware/Jaquar |
| 66 | S&F in repair 5 mm thick looking mirror selected quality glass exc 0.50 sqm eachand fixed to wall with brass screws, cups and washers including polished, rounded off edges of glassand drilling hole in glass complete as specified and directed. |
| 67 | S & F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 68 | S&F CP/PTMT grating 100 mm size (ISI Marked) complete all as specified and directed. |
| 69 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever MS brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mmcomplete all as specified and directed. |
| 70 | S&F0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed |
| 71 | Taking down cement plaster on brick /concrete surface wall / ceiling of any description incl racking out joints hacking for key and scrubbing down with water complete all as specifed and directed. |
| 72 | M&L rendering 10 mm thick incement mortar (1:4)on ceiling finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 73 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on bricl wall/ concrete surface concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer"s instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:Liquid WPC will be measured and paid separately. |
| 74 | M&L15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (Without using extra cement ) complete all as specifed and directed. |
| 75 | Supply only water proofing compound (liquid),ISI marked. |
| 76 | M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement based paint over a coat primer complete all as specified and directed |
| 77 | M&L for roller application of two coats of OBD on newly plaster wall surfaces incl applying with 2 mm thick Birla / JK Putty over a coat ofprimer of surfaces complete all as specified and directed. |
| 78 | M & L for preperation of new plastered or unplastered surfaces and applying three coats of Whitewash on ceiling complete all as specified and directed. |
| 79 | M&L for two coats of weather coat paint (apex) over a coat of primer on new surfaces on wall including preparation of newly/Old &plastered surfaces complete all as specified and directed (Make: asian, Durolex or equivalent) |
| 80 | M&L for Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 81 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and as directed. |
| 82 | M&L for Preparation of old decoratedsurfaces of wallby complete removing of existing treatmentand applying by roller application two coats Oil bound distemper over a coat primer and including 3 mm thick Birla / JK Putty surfaces filing or cracks, holes on wall byputty etccomplete all as specified and directed. |
| 83 | M&L for Preparation of old plastered surfaces of wallby complete removel of existing treatment and applying two coat of cement base paint complete all as specified and directed. |
| 84 | M&L Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and as directed |
| 85 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girthand applying two coat of synthetic enamel paint complete all as specified and as directed |
| 86 | Taking down cement plaster and decayed concrete if any upto double storey construction from roof projection, chajja, concrete surface of any description and making good the decayed portion with CM 1:3 or with PCC 1:2:4 using form work if any, TMT bar and finally finishing the surface with 10mm thick cement plaster 1:3 to match the existing surface all as specified and directed |
| 87 | Taking down CI/PVC/ACpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mmdia pipe. |
| 88 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110mm dia. complete all as specified and directed. |
| 89 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 75mm dia. complete all as specified and directed. |
| 90 | S & F PVC (SWR) bends any radius of 110 mm diacomplete all as specified and directed. |
| 91 | S & F PVC (SWR) bends any radius of 75 mm diacomplete all as specified and directed. |
| 92 | S & F PVC (SWR) bends any radius of 100 mm dia provided with access door complete all as specified and directed. |
| 93 | S & F PVC (SWR) bends any radius of 75 mm dia provided with access door complete all as specified and directed. |
| 94 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed. |
| 95 | Ditto all as per item No. 94.00 above but 75mm bore complete all as specified and directed. |
| 96 | S & F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 97 | S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified and directed. |
| 98 | Demolition of reinforced cement concrete of any description and any position and removing the rubish from the work site complete all as specified and directed |
| 99 | M&L RCC type A-1, 1:1.5:3 (20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopiies, deck slabs and in shelves and the like complete all as specified and directed |
| 100 | M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed. |
| 101 | S&FTMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified |
| 102 | M/L for 12 to 14 mm thick green stone slab (Udaipur) set in CM 1:4 and grindingand polishing and rounding/moulding the edges over and including 15 mmthick screed bed or bedding layer ofcement mortar 1:4as in shelves, window cills etc complete all as specified and directed. |
| 103 | M&L PCC 1:2:4, type B1 (20mm graded stone Aggregate) as in surface channel, coping and drain including necessary form work complete all as specified and directed |
| 104 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exceeding 1/2 brick but not exceeding one brick complete all as specifed and directed. |
| 105 | Taking down roofing/Terrazo Tiles of any description incl mud/cement plaster etc and cleaning the top surface, removing rubbish material & washing downwith waterroof surface complete all as specified and directed |
| 106 | M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding levelling course for maintain to proper slope of roof incl necessary formwork etc complete all as specifed and directed. |
| 107 | M& L Rendering 15 mm thick in cement mortar 1:4 on concrete surfaces mixed with liquid water proofing compound@ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smoothwithout using extra cement over roof slabcomplete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately |
| 108 | M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed. (i)Properly cleaning and drying concrete surfaces to receive the new treatment. . (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (iii)Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm/ Sqm over & incl a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 kg/ sqm duly sanded over polymeric membrane complete |
| 109 | Excavation in Post holes(or similar holes)each no exc 0.5 CUM getting out ,returning filling in & ramming earth or broken rubble mixed with earth around in layers not exc25cm ,watering & removing surplus soil to distence n. exc 50 m & making good surfacein soft soil complete all as specified and directed |
| 110 | Materials and labour for plain cement concrete (1:5:10) Type E2 using 40mm graded stone aggregate in sub base of floor,complete all as specified and directed. |
| 111 | M&L 50mm thickSandcushioning filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 112 | M&L hard core of broken bricks of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed. |
| 113 | M&L for Machine Pressed precast glazed colour reflective PCC interlocking paver block 60mm thick mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed. The pattern of paver block shall be approved by GE. Note: Payment of sand cushion shall be measured and paid separately. |
| 114 | M&L for tubuler mild steel truss / vertical support, Purlins and rafterincludig conecting plate cleat including welding etc complete specified and directed. |
| 115 | Supply and fixing pre-paited galvalume aluminium zinc corrugated plate sheet0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixedwith self drilling screws as specified and directed |
| 116 | M & L for mild steelPlates (plain or chequered) channels,Fe 410-W (grd-E-250) quality square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed |
| 117 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 118 | M & L for cement concrete, 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.. |
| 119 | M & L reinforced cement concrete (Nominal mix) 1:1:5:3, type A1 using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 120 | M & L for reinforced cement concrete (Nominal mix) 1:1:5:3, type A1 using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. |
| 121 | M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed. |
| 122 | M & L for formwork to rough finished square, rectangular or polygonal concrete surface as in sides of columns, pillars, post, struts, etc complete all as specified and directed. |
| 123 | M & L forTMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 124 | Taking down MS door any size and refixing the same new hinges and repair etc complete all as specifed and directed. |
| 125 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 126 | Removing surplus excavated material (SOIL) to distance n. exc. 50 m but not exc. 25 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 127 | M&L poroviding precast cement concrete louvers and jallies, tye B-0 1:2:4 (12.50 mm agraded stone arregate) 25 mm thick (measured soild), including all mould-ing including reinforcement and set in CM 1:4 complete all as specified and directed. . |
| 128 | M&L for two coats ofwether of weather coat paint (apex) on old surfaces of wall including preparation of old plastered surfacecomplete all as specifed and directed. |
| 129 | M/L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note:- Edges of slab shall be rounded off and a hole for gas pipe shall be made on cooking plateform. |
| 130 | M&L for 10 mm thick plaster in cement mortar 1:4 as a backing coat for fixing of wall tiles granite /stone slabetc complete all as specified and directed. |
| 131 | Boring holes 3m deep and 300 mm dia of pilein any soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed. |
| 132 | Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such asswitches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed. |
| 133 | Taking down carefully main switches DB"s/ MCB DB"s and making good the disturbed surfaces of wallsetc complete all as specified and directed. |
| 134 | Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls as directed. |
| 135 | M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling pvc conduit / casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed:- |
| 136 | One light / fan point controlled by one switch |
| 137 | One bell point controlled by one bell Push |
| 138 | One 5 Amps socket out let point controlled by one switch on same board with other switches. |
| 139 | One 5 Amps socket out let point on independent board controlled by one switch. |
| 140 | ~Ditto~all as per Sch A Item No. 135.00 above but using pvc insulated unsheathed 2.5 sqmm cross sectional area copper conductor cable FRLS cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated coppercable FRLSfor 15/16 Amps socket point on independent board controlled by one switch complete all as specified and directed. |
| 141 | Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed. |
| 142 | Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed. |
| 143 | S&F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed. |
| 144 | S&F socket outlet flush type multipurpose 2 in1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed. |
| 145 | Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed. |
| 146 | Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 147 | Supply and fixing batten/angular fittings complete all as specified and directed. |
| 148 | Supply and fixing LED Lamp 7/8 watt complete all as specified and directed. |
| 149 | Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed. |
| 150 | Supply and fixing Bell, AC 240 Volts,single pole complete all as specified and directed. |
| 151 | Supply and fixing double door TPN DBs 4 wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral & DB"s will be fitted concealed in wall / surface as per site required complete all as specified and directed. |
| 152 | Supply and fixingdouble door SPN DBs 8 wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed. |
| 153 | Supply and fixing with MCB SPN 5 to 40 amps 10 KA, C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 154 | Supply and fixingMCB SP 240 volts 5 to 32Amps, 10 KA breaking capacity,"C" type including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 155 | Supply and fixingMCB TPN 50 to 63Amps, 10 KA, C-Series including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 156 | Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make-Havells Cat No. REGALBATTENT8UPTO1X22WDSBSWHor equivalent model of Bajaj/Philips/ CG. |
| 157 | Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havells, Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG |
| 158 | Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make:Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ |
| 159 | M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling of old light bracket complete all as specified and as directed. |
| 160 | M&L for CPRI approved factory made sheet metal box made out of 2 mm thick MS sheet of size 900 X 600 X 300 mm with single door hinged shutter and locking arrangement for fixing DBs, KWH Metter etc flashed / grouting on wall incl painting with two coat of powder coated paint over a coat of red oxide primer with suitable glass vision panel of each meters shall be provided in the door to easy meters reading , including taking down the old u/s box complete all asspecified & directed. . |
| 161 | Taking down ceiling fan of any sweep, keeping with safe custodyand refixing the same with replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed. |
| 162 | Supply and fixing metal body air fan / ventilator with louver 230 mm sweepand grouting withnut , bolts & Fastenaron the wall and make good the disturbed surface and electric connection with 1.5 Sqmmthree core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .Make: HAVELLS Cat No-Ventil Air - DS equivalent make |
| 163 | M&L for Sub main wiringtwo single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete. Note : Two run of 6 sqm copper cable & one rune of 4 sqm copper cable shall be measured & paid as one unit. |
| 164 | Supply and fixing in repair Rigid non metallic PVC conduitISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbedsurfaces complete all as specified and directed. |
| 165 | Supply and fixing in repair ofEarthing to panel with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead wire protected by GI pipe 15 mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete. |
| 166 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including taking out oldu/s cable. Make: Havell"s/Polycab/ KEI/MESCAB |
| 167 | Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 168 | M & L clean dry river sandin trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid. |
| 169 | M & L for old sizesub class ‘B’ bricks, laid in trenches as cable covers / protectioncomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
