Drinking Water And Sanitation Department has published Construction Of 200 / 165 Dia X 225 M Hydt 2 Nos , Pump House & Sump , Supply & Installation Of Submersible 5 Hp 2 Nos, Hdpe Pipe For Rising Mains For Water Supply In Jawahar Navodaya Vidyalaya Mahagama Godda District Under Dwsd Godda For The Year . Submission Date for this Tender is 01-06-2022. Keys Tenders in godda Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Construction of 200mm x165mm x 225.00 M deep high yield Drilled Tube well 2 Nos |
| 2 | HYDT : Cost of drilling 200mmX165mmX180 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. |
| 3 | (a) 0.00m Up to 50.00m depth below G.L. In Rural Areas |
| 4 | (b) Above 50.00 m depth. In Rural Areas |
| 5 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job. |
| 6 | Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job. |
| 7 | Providing brick masonry chamber ofinner size 600 x 600 x 750 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job . |
| 8 | Construction of Pump House (2.30X2.30) M for Submersibble Pump 2 Nos |
| 9 | Earth work in excavation in foundation isolated footing trenches in hard soil (Class B) and disposal of excavated earth as obtained to a distance of 50mtr. Including all lift, leveling. Ramming the foundation trenches. Removing roots of trees, shrubs all complete as per specification of E/I |
| 10 | Providing coarse clean sand in filling in foundation trenches and in plinth including ramming and watering in layers not exceeding 150mm thick with all lead and lift including cost of materials labours royalty and taxes all complete as per building specification and direction. |
| 11 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 12 | Providing P.C.C.M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 13 | Providing RCC M200 (1:1½:3) in foundation with approved quality of stone chips (20mm to 6mm) graded and clean coarse and of F.M (2.5 to3) including screening shuttering mixing cement concrete in mixer and placing in position in vibration striking curing (but excluding cost of reinforcement) taxes of royalty all complete as per building specification and direction of E/I. |
| 14 | Providing RCC (M200) (1:1½:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I |
| 15 | Providing designation 75A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M (2 to 2.5) including providing 10mm Thick mortar joint cost of screening scaffolding racking out joint to 15mm depth. Curing taxes of royalty all complete as per building specification and direction of E/I |
| 16 | Providing RCC (M-200) with nominal mix of (1:1½:3) in columns withapproved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 17 | Providing 50mm thick cement concrete flooring (1:2:4) with 20mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing finishing the surface smooth by rubbing with carborandum stone taxes royalty all complete as per building specification and direction of E/I. |
| 18 | Providing RCC (M-200) with nominal mix of (1:1½:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M (2.5 to 3 ) including curing shuttering mixing in positing. Vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I . |
| 19 | Providing RCC (M-200) with nominal mix of (1:1½:3) in beam of all type with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position. Vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Providing 6mm thick cement plaster (1:4) ceiling with clean coarse sand of F.M 1.5 including cost of screening curing with all leads & lift of water scaffolding taxes & royalty all complete as per building specification and direction of E/I. |
| 21 | Providing 12mm cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening curing with all leads & lift of water scaffolding taxes & royaltyall complete as per building specification and direction of E/I |
| 22 | Providing 1.5mm cement punning including curing carriage of water with all leads & lift as per building specification and direction of E/I. |
| 23 | Supplying fitting and fixing 20 gauge GCI sheet gate fitted on MS angle frame of size60x60x6mm including cost of fabrication providing necessary locking arrangement with Haskell and dummy duly fixed in CC (1:2:4) blocks of required size applying a priming red lead paint over steel work taxes all complete as per building specification and direction of E/I. |
| 24 | Providing two coats of painting with ready mixed paint approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I |
| 25 | Providing two coats of painting with ready mixed paint approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I |
| 26 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 27 | Providing Tor steel reinforcement of 8mm,10mm, 12mm &16mm dia bar as per approved design and drawing excluding carriage of bars to work sites cutting bending and binding with annealed wire with cost of wire removal of rust placing the rod in position all complete as per building specification and direction of E/I. |
| 28 | Supplying all labour tools materials including providing scaffolding etc. for painting on wall of VAT/Pump House & writing appropriate slogans of NRDWP logo. Including painting of surface as required etc. all complete job as per direction of E/I. |
| 29 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 30 | Carriage of materials to work site by mechanical transport including loading, unloading and stacking at site etc. all complete job as per specification and direction of E/I. ( Payment must be done as per SOR and actual lead for different places.) |
| 31 | a. Cement - 20 K.M. Lead |
| 32 | b. Sand - 15 K.M. Lead |
| 33 | c. Stone Chips - 20 K.M. Lead |
| 34 | d. Steel - 20 K.M. Lead |
| 35 | e. Brick - 20 K.M. Lead |
| 36 | Submersibble Pump set 2 Nos |
| 37 | Supplying Submersibble pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller.Motor suitable for working on 220 V + 10% , 1 PH , 50 Hz A.C supply with cable guard, thrust carbon /fiber bearing to withstand entire hydraulic thrust , water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump 3 meter submersibble copper conductor cable in single/double run shall be provided with each pump. Submersibble pump 5 HP upto 20 Stage |
| 38 | Submersibble pump 150 mm Dia ( Bronze Impeller ) upto 8 Stage ( Rate included 10 % CP) |
| 39 | Upto 20 Stage |
| 40 | Supply fully automatic star delta starter to operate induction motor working on 415 V , 3 phase , 50 Hz with no volt coil , overload element , On-Off push buttons with necessary materials & connected to supply etc complete starter with original sheet steel enclosure 10 HP Starter |
| 41 | Cost ofStabiliser of 25 KVA for three phase electricity line suitable for constant voltage supply for 5 HP submersible Pump 2 nos. Servo Controlled Automatic Voltage Stabiliser ( Output 415 +- 1% ) Input 280 to 450 Volt |
| 42 | Supplying fitting&fixing 3 core 4 sq mm flat copper submersibble cableincluding all taxesroyalityetc all complete as per specification & direction of E/I. |
| 43 | Providing & fixing MS clamp of required dia to the top of casing pipe of T/W as per IS 2800(Part-1) including necessary bolts & nuts required size all complete as per specification & direction of E/I 150mm dia clamp . |
| 44 | Cost of GI pipes ISI marked medium quality required for lowering of motor. |
| 45 | Supplying , Fitting & Fixing GI/GM specials of specific dia required |
| 46 | 50 mm dia GM NR Valve Horizontal weight not less than 1 Kg |
| 47 | 50 mm dia GI Elbow |
| 48 | 50 mm dia Nipple |
| 49 | 65 mm dia Reducing Socket |
| 50 | Rising Mains from HYDT borewell to Sump 1000 M |
| 51 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. |
| 52 | Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete . |
| 53 | Providing PCCM-150 with nominal mix of (1:2:4) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion. |
| 54 | Rising Main/Delivery Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074materials rates are Ex-factory including transportation, taxes and duties. PE-80 , PN- 10 |
| 55 | 63 mm dia Rising HDPE Pipe- |
| 56 | Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074materials rates are Ex-factory including transportation, taxes and duties. PE-80 , PN- 10 |
| 57 | Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc as per site requirment. and all labours as directed by engineer in charge as per IS-7634 Part II. MJP 19-20 sec-I-IX sl no -2(i) |
| 58 | 63 mm dia Rising HDPE Pipe- |
| 59 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. |
| 60 | Construction of 3.5MX2.5M(Internal Dimension) X2.5M Depth ESR SUMP Required for water storage. |
| 61 | Earth work in excavation in foundation isolated footing trenches in hard soil (Class B) and disposal of excavated earth as obtained to a distance of 50mtr. Including all lift, leveling. Ramming the foundation trenches. Removing roots of trees, shrubs all complete as per specification of E/I |
| 62 | Providing coarse clean sand in filling in foundation trenches and in plinth including ramming and watering in layers not exceeding 150mm thick with all lead and lift including cost of materials labours royalty and taxes all complete as per building specification and direction. |
| 63 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 64 | Providing P.C.C.M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 65 | Providing RCC M200 (1:1½:3) in foundation with approved quality of stone chips (20mm to 6mm) graded and clean coarse and of F.M (2.5 to3) including screening shuttering mixing cement concrete in mixer and placing in position in vibration striking curing (but excluding cost of reinforcement) taxes of royalty all complete as per building specification and direction of E/I. |
| 66 | Providing RCC (M200) (1:1½:3) in Grade Beamwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I |
| 67 | Providing RCC (M-200) with nominal mix of (1:1½:3) in columns withapproved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 68 | Providing RCC (M-200) with nominal mix of (1:1½:3) in Baseslab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M (2.5 to 3 ) including curing shuttering mixing in positing. Vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
| 69 | Providing RCC (M-200) in Sump wall with nominal mixof all type with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position. Vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
| 70 | Providing RCC (M-200) in Roof Slab with nominal mixof all type with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. (2.5 to 3) including curing shuttering mixing cement concrete in mixer and placing in position. Vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
| 71 | Providing 12 mm water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% (Percent) cico or any other approved water proofing compound including cost of screening, curing with all leads & lift of water scaffolding taxes & royaltyall complete as per building specification and direction of E/I |
| 72 | Providing 12mm thick cement plaster (1:6) ceiling with clean coarse sand of F.M 1.5 including cost of screening curing with all leads & lift of water scaffolding taxes & royalty all complete as per building specification and direction of E/I |
| 73 | Providing 1.5mm cement punning including curing carriage of water with all leads & lift as per building specification and direction of E/I. |
| 74 | Providing two coats of snowcemof approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l. |
| 75 | Providing Tor steel reinforcement of 8mm,10mm, 12mm &16mm dia bar as per approved design and drawing excluding carriage of bars to work sites cutting bending and binding with annealed wire with cost of wire removal of rust placing the rod in position all complete as per building specification and direction of E/I. |
| 76 | Supplying all labour tools materials including providing scaffolding etc. for painting on wall of VAT/Pump House & writing appropriate slogans of NRDWP logo. Including painting of surface as required etc. all complete job as per direction of E/I. |
| 77 | Carriage of materials to work site by mechanical transport including loading, unloading and stacking at site etc. all complete job as per specification and direction of E/I. ( Payment must be done as per SOR and actual lead for different places.) |
| 78 | Cement - 20 K.M. Lead |
| 79 | Sand - 15 K.M. Lead |
| 80 | Stone Chips - 20 K.M. Lead |
| 81 | Steel - 20 K.M. Lead |
| 82 | Brick - 20 K.M. Lead |
| 83 | Add 12% GST. |
| 84 | Add 1% Labour Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
