Rural Development Department has published Upgradation Of Anandabazar Chc Under R.D. Kanchanpur Sub Division During The Year 2022-23 ( Above First Floor ) . Building Work. Submission Date for this Tender is 08-06-2022. Building Work Tenders in kanchanpur Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 5.8.5.1 Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 2 | 5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 3 | 5.8.4.1 Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 4 | 5.18 Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits 5.18.2 40 mm thick |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement 5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- 6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 9 | 10.38 Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete |
| 10 | 10.39 Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. 10.39.1 Anti-Skid Tiles 10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 11 | 10.9 Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete. 10.9.2 40 mm thick with 20 mm well burnt brick aggregate |
| 12 | 10.42 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 10.42.2 Double charged Stainfree vitrified tiles 10.42.2.1 Size of tile 60x60 cm |
| 13 | 9.13 Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete |
| 14 | 16.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- 16.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 15 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- 16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 16 | 16.10 Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in charge:- 16.10.1 205 x 19 mm |
| 17 | 8.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : 8.1.3 Local Teak Wood |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick. 8.6.5.4 Prelaminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked |
| 19 | 8.46.2 Fixed to openings /wooden frames with rawl plugs screws etc. |
| 20 | 8.51 Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix |
| 21 | 8.56 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 8.56.2 125 × 125 × 27 × 2.80 mm |
| 22 | 8.94 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 8.94.2 250x16 mm |
| 23 | 8.95 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 8.95.4 150x10 mm |
| 24 | 8.98 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 8.98.1 125 mm |
| 25 | 12.1 12 mm cement plaster of mix 12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 26 | 15 mm cement plaster on the rough side of single or half brick wall of mix: 12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 27 | 6 mm cement plaster of mix : 12.4.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 28 | 12.23 Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 29 | 12.29 Finishing walls with textured exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : 12.29.1 New work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 30 | 12.32.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. |
| 31 | 12.32.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 32 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 19.4.1 PN-16 Pipe, 16 mm OD |
| 33 | 19.4.3 PN-16 Pipe, 25 mm OD |
| 34 | 19.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 19.75.3 25 mm nominal bore. Weighing not less than 62 gm |
| 35 | 19.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 19.49.1 15 mm nominal bore |
| 36 | 19.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 19.52.1 15 mm nominal bore |
| 37 | 19.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 19.21.2 45 cm length 19.21.2.1 15 mm nominal bore |
| 38 | 19.19 Providing and fixing gun metal non-return valve of approved quality (screwed end): 19.19.2 32 mm nominal bore 19.19.2.2 Vertical |
| 39 | 19.18 Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : 19.18.3 25 mm nominal bore |
| 40 | 19.76 Cutting holes upto 30x30 cm in walls including making good the same : 19.76.1 With 1st class bricks. |
| 41 | 19.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 42 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 18.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 44 | 18.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 45 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 18.28.1 Semi rigid pipe 18.28.1.1 32 mm dia |
| 46 | 18.31 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 47 | 18.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 48 | 18.86 Providing and fixing to the inlet mouth of rain water, soil, waste & vent pipes pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. 18.86.1 75mm |
| 49 | 18.86.2 100mm |
| 50 | 18.82 Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 18.82.1 Single socketed pipe - 75 mm OD |
| 51 | 18.82.2 Single socketed pipe - 110 mm OD |
| 52 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 18.73.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gm |
| 53 | 18.84.3 Single equal tee without door 18.84.3.1 75x75x75 mm |
| 54 | 18.84.3 Single equal tee without door 18.84.3.2 110x110x110mm |
| 55 | 18.84.4 Single equal tee with door 18.84.4.1 75x75x75 mm |
| 56 | 18.84.4 Single equal tee with door 18.84.4.2 110x110x110mm |
| 57 | 18.84.5 Bend 87.5° 18.84.5.1 75mm |
| 58 | 18.84.5 Bend 87.5 18.84.5.2 110mm |
| 59 | 18.85 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. 18.85.1 75mm |
| 60 | 18.85.2 110mm |
| 61 | 18.84.8 Double equal junction of required degree with door 18.84.8.1 75x75x75 x 75 mm |
| 62 | 18.84.8 Double equal junction of required degree with door 18.84.8.2 110x110x110 x110 mm |
| 63 | Providing and fixixng 1.0 HP mono block including all necessary arrangements complete as per the direction of the Engineer-in-charge. (NON SCHEDULE) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
