Public Works Department-PWD has published Maintenance Work Of Pooled Houses Located At Vip Colony / Buffalo Corner For The Financial Year 2022-23.. Submission Date for this Tender is 31-05-2022. Building Work Tenders in rampur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-May-2022 | CORRIGENDUM_1192_Dt.28.05.22 | Date | 31-05-2022 |
| Sl. No. | Item Description |
| 1 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. (DSR NO. 17.68.1) |
| 2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. Orissa pattern W.C Pan of size 580x440 mm(DSR NO. 14.80.2) |
| 3 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal bore (DSR NO. 17.22B) |
| 4 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm(DSR NO. 17.10.1.2) |
| 5 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (DSR NO. 18.51.1) |
| 6 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (DSR No. 18.49.1 ) |
| 7 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (DSR No. 18.53.1 ) |
| 8 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (DSR No.-17.7A) |
| 9 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (DSR No.-17.8) |
| 10 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes having thermal stabilitiy for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing tha pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvant cement and testing of joints complete as per direction of enginieer in charge. internal work exposed on wall . 15mm nominal outer dia pipes (DSR NO. 18.7.1) |
| 11 | Same as above but 20 mm nominal outer dia pipes. (DSR NO. 18.7.2) |
| 12 | Same as above but 25 mm nominal outer dia pipes. (DSR NO. 18.7.3) |
| 13 | Providing and placing on terrace polythylene water storage tank ISI: 12701 Marked with cover and suitable locking arragemant and making necessary hole for inlet, outlet and overflow pipes without fittings and the base support for tabk. 18.48 (Excluding GST) |
| 14 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm length 15 mm nominal bore (DSR NO. 18.22.2) |
| 15 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats (DSR No. - 14.2.1) |
| 16 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter. (DSR No.- 14.28.2) |
| 17 | Dismatling existing plaster including disposal of refuse with in distance of 60m. (s.i. No. 706) |
| 18 | 12mm thick plaster in 1:3 with cement & coarse sand including supply of all complete material, labour and T&P etc. (S.I. No.-586) |
| 19 | M-150 brick work in one cement and three coarse sand mortar in one brick including supply of all meterials labour and T&P etc. required for proper completion of work.(Excluding GST) (S.I. No. 307) |
| 20 | Reinforced cement concrete work with 2cm. Gauge stone grit, coarse sand & cement in 4:2:1 including supply of all complete materials, labour and T&P etc.. (S.I. No.-283) |
| 21 | M.S. or Iron work in plain work as in reinforcement in R.C.C. work including supply of all material, labour and T&P etc. (S.I. No.- 504) |
| 22 | Providing and fixing fly proof galvanised M.S. wire gauge with 2nd class teak wood beading 62X19 mm. to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm with 2nd class teak wood beading 62 x 19 mm. SOR-9.51.1 |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed of sal wood and fixed in position: |
| 24 | Supply and fixing of 32 mm thick flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.SI 470 i |
| 25 | Mild steel or iron work in heavy sizes such as trusses; builts up gates, door, frames, record racks roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work.SOR-503 |
| 26 | Providing and laying of 10 mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1:4 cement mortar (1 cement : 3 coarse sand) finishing with cement slurry and with pigment grouting and polishing complete including supply of all materials, labour, T&P required for proper completion of work. (Excluding GST) |
| 27 | Supply & fixing 6 mm (1/4") China white glazed or other approved tile in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required fo proper completion of the work. (Excluding GST)SI 628 |
| 28 | Scraping Old white or Colour wash including disposal by the E/I with a distance of 60metre.(S.I.No 708) (Excluding GST) |
| 29 | Providing wall putty on Old surface with approved quality material of Berger/J.K./Birla or similar make 2 coates. (Ch-15 New Item 12)Exculding G.S.T. |
| 30 | Distemper two coat with oil bound distemper of approved brand manufacture and required shade on decoreted wall surfaces to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british, shalimar, asian paints after throughly brushing surface free from mortar droppings and other foreign matter and also including preparing the surface even also sand prepared smooth including cost of all materials.(SI-649+650) (Excluding GST) |
| 31 | Finishing walls with Two coat of water proof cement paint Weather coat of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tols & paint etc. required for proper completion of the work. (Ch-15 New Item 8+9) |
| 32 | Painting two coat on previously painted surface in superior quality including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I. no. New Item 3(iii) + 4(c) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
