Public Health Engineering Department-PHED has published Renovation Of Building Acquired For District Water Testing Laboratory At Lakhanpur Under Jal Jeevan Mission Please Refer Boq. Submission Date for this Tender is 27-05-2022. Building Work Tenders in kathua Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Labour engaged for site clearance by way of removal of mulba and other material dumped in the room/ complex |
2 | Demolshing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 mtrs lead as per the directions of Engineer Incharge in cement mortar |
3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter includingchowkhats, architrave, holdfats etc. complete and stacking within 50 meter lead: of area beyond 3sqm |
4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter includingchowkhats, architrave, holdfats etc. complete and stacking within 50 meter lead: of area 3.00 sqm and below |
5 | Taking out doors, windows and clerestory window shutters (Steel or Wood) including stacking within 50 meters lead: of area beyond 3.00 sqm |
6 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 Mtr lead |
7 | Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand) |
8 | Reinforcement cement concrete work in beams, suspendede floors, roofs having slope upto 150 landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) |
9 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo -Mechanically Treated bars of grade Fe-500 or more |
10 | Centering and shuttering including strutting, propping etc and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
11 | Centering and shuttering including strutting, propping etc. and removal of form for edges of slabs and breaks in floors and walls under 20 cm wide |
12 | 15mmthick Cement plasteronrough side of single or half brick wall of mix : 1:6 ( 1 cement : 6 coarse sand) |
13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second Class Deodar |
14 | Providing and fixing panelling or panewlling and glazing in panelled or panelled and glazedshutters for doors, windows and clerestory windows (Area of Opening for panels inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Second Class Deodar wood |
15 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Second class deodar wood |
16 | Providing and laying vitrifiesd floor tiles in different sizes with water absorption less than 0.08% & conforming to IS: 15622 of approved make in all colours and shades laid on 20mm thick cement mortar1:4 etc. (Size of tile 600x600 mm) |
17 | Providing and fixing PVC panelling tongued and grooved on wall including PVC breading complete job. |
18 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead. |
19 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall G.I.Pipe 15mm dia (Med.) = 100 mts |
20 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Internal work-Exposed on wall G.I.Pipe 20mm dia (Med.) = 100 mts |
21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank (Sintex,Electroplast, Star,Lotus or equivalent having valid ISI license) |
22 | Providing and fixing brass stop cock of approved quality G.I.Stop Cock 15mm dia = 4 Nos |
23 | Providing and fixing brass stop cock of approved quality G.I.Stop Cock 20mm dia = 2 Nos |
24 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) G.I.Union 15mm dia = 4 Nos |
25 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) G.I.Union 20mm dia = 2 Nos |
26 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 893115mm dia = 4 nos |
27 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15mm dia = 6 nos |
28 | Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.15mm dia = 6 nos |
29 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.3 nos |
30 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour15 mm nominal bore with 30 cm length. = 8 nos |
31 | Providing and fixingwhite vitreous china laboratory sink including PVC making all connection excluding cost of fitting. Size 450 x 300 x 150mm 1 No |
32 | Providing and fixingwhite vitreous china wash basin sink including PVC making all connection excluding cost of fitting. Flat back wash basin of size 630 x 450 mm 2 Nos. |
33 | Providingand fixing white vitreous china pedestal type water closet (European type W.C.Pan) with seat and lid, 10 lts low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat with lid.2 Nos. |
34 | Providing nad fixing 1.00 H.P. monoblock pump set 1 no |
35 | White washing with lime to give an even shade :Old work (two or more coats) |
36 | Finishing walls with water proofing cement paint of required shade on old work (two or more coats applied @ 2.20 kg/10sqm) |
37 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
38 | Painting with oil type wood preservative of approved brand and manufacture on New work (two or more coats) |
39 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
40 | Re-lettering with black Japan paint of approved brand and manufacturer |
41 | Providing and fixing PTMT handles with necessary screws etc. Complete125x34x24mm weighing not less than 23gms= 36 nos |
42 | Providing and fixing PTMT tower bolts with 12 mm one piece rod inside and necessary screws etc. Complete 152x42x18mm weighing not less than 60gms = 36 nos |
43 | Carpenter to be engaged for repair of existing windows and doors |
44 | Providing gola (Angular fillet) 75 x 75mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4stoneaggregate 10mm down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75mm deep chase. |
45 | Electical works of Laboratory in four rooms, carridor, two nos Bathrooms and two nos flood light at the entry point. Rooms includes 5 nos electrical fan, 2 nos bulb, 2 nos two tube light (in each Room) and five nos heating ponts and 2 nos bulb points in each Bathroom includung indicators and one no 750 watt inverter with 12 volt battery incl. wiring and alied works (Complete Job) All the appliences shouldbe Hawlels/Usha/Bajaj or any ISI Mark) |
46 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
47 | Carriage of sand/stone dust/quarry-muck/moorum/other aggregate of max. size upto 20 mm by mechanical transportation in all terrains through a lead upto 10 kmsincluding cost of loading, unloading and stacking. |
48 | Carriage of stone aggregate of max. size upto 6mm to 26.5mm by mechanical transportation in all terrain through a lead of 10 kms including cost of loading, unloading and stacking |
49 | Carriage of bricks by mechanical transporation in allterrian through a lead of 10 kms including cost of loading, unloading and stacking. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail