}

Tender For C And D Waste Collection Center= \ 1 Earth Work In Excavation In Trenches For Foundation Pipes Cable Etc In Ordinary Soil ( Loan Clay Or Sand ) Including Lift Upto 1.5 M Lead Upto 50M And Dressing Of Sides And Ramming Of Bottom And Disposa, kanpur-Uttar Pradesh

Kanpur Municipal Corporation has published Tender For C And D Waste Collection Center= \ 1 Earth Work In Excavation In Trenches For Foundation Pipes Cable Etc In Ordinary Soil ( Loan Clay Or Sand ) Including Lift Upto 1.5 M Lead Upto 50M And Dressing Of Sides And Ramming Of Bottom And Disposa. Submission Date for this Tender is 28-05-2022. Brackets and Braces Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32320490
Tender For C And D Waste Collection Center= \ 1 Earth Work In Excavation In Trenches For Foundation Pipes Cable Etc In Ordinary Soil ( Loan Clay Or Sand ) Including Lift Upto 1.5 M Lead Upto 50M And Dressing Of Sides And Ramming Of Bottom And Disposa
Open Tender
Indian
Uttar Pradesh
kanpur
28-05-2022

Tender Details

Tender For C And D Waste Collection Center= 1 Earth Work In Excavation In Trenches For Foundation Pipes Cable Etc In Ordinary Soil ( Loan Clay Or Sand ) Including Lift Upto 1.5 M Lead Upto 50M And Dressing Of Sides And Ramming Of Bottom And Disposal Of Surplus Excavated Earth As Directed By The Engineer I / C Within A Lead Of 50M. 2 Providing And Laying In Cement Concrete 1:4:8 Cement , Co. Sand & 40 Mm Stone Ballast Etc All Comp. 3 Providing And Laying In Cement Concrete 1:2:4 Of Not Less Than Strength Of M 150 [ Stone Ballast 4 ( 20 Mm Nornal Size ) : 2 Approved Coarse Sand : 1 Cement ] And Curing Complete, Including Cost Of Form Work In Foundation And Floors. 4 Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials , Labour And Tools And Plants Etc, Required For Proper Completion Of Work. 5 R.C.C Works With Cement Approved Coarse Sand And 2 Cm ( 3 / 4 ) Gauge Approved Stone Ballast In The Proportion 1:2:4 For Slab Including Etc All Complete. ( R.C.C Raft Foundation ) 6 Coloumn 7 Beam 8 Mild Steel Or Iron Work In Plain Work Such As Rcc Including Etc All Complete. 9 Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortar In Super Structure Above Plinth Level Upto Floor Two Level ( Upto Two Storeys ) Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick In Thickness Of Wall More Than 12Cms. 10 12 Mm Cement Plaster In 1:4 ( 1 Cement : 4 Fine Sand ) Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And / Or Rounded Angles Not Exceeding 80 Mm. In Girth And Finished Even And Smooth. No Extra For Mixing Any Additive. 11 Providing And Applying White Cement Based Putty Of Average Thickness Of 1 Mm , Of Approved Brand And Manufacturer Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Including Cost Of Material, Labour T&P Etc. Complete. 12 Finishing Walls With Two Coat Of Acrylic Smooth Exterior Paint Of Best Quality Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work. 13 Supply And Fixing Of G.I Profile Sheet Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work. 14 Providing And Fixing Of Brc Jali Including Cost Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work & As Per Direction Of Engineer In Charge. 15 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 - Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters ( 80X1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover ) 16 Providing And Fixing Ball Bearing For Rolling Shutters 17 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. ( In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete 18 Supply And Installation Of 1.5 Hp Submercible Pump Including Etc All Complete. 19 Add 2% For Electical Connection And Elecrification Work Of Facility 20 Add 2% Side Devlopment Through Horticulture And Land Scaping Work. 21 Add 2% Contingency

Key Value

Document Fees
INR 2360 /-
EMD
INR 327702.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail