}

Rate Of Different Articles For Beautification Of Buniadpur Bunicipal Office Building- 1 Manufacturing, Supplying, And Installing Fiber Composite Structural Sheet Of Decorative Gazebo Top On Existing Rccrooftop Around The Periphery Over Existing6nos. Rc, buniadpur-West Bengal

District Magistrate has published Rate Of Different Articles For Beautification Of Buniadpur Bunicipal Office Building- 1 Manufacturing, Supplying, And Installing Fiber Composite Structural Sheet Of Decorative Gazebo Top On Existing Rccrooftop Around The Periphery Over Existing6nos. Rc. Submission Date for this Tender is 24-05-2022. Screws Tenders in buniadpur West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

32263458
Rate Of Different Articles For Beautification Of Buniadpur Bunicipal Office Building- 1 Manufacturing, Supplying, And Installing Fiber Composite Structural Sheet Of Decorative Gazebo Top On Existing Rccrooftop Around The Periphery Over Existing6nos. Rc
Open Tender
Indian
West Bengal
buniadpur
24-05-2022

Tender Details

Rate Of Different Articles For Beautification Of Buniadpur Bunicipal Office Building- 1 Manufacturing, Supplying, And Installing Fiber Composite Structural Sheet Of Decorative Gazebo Top On Existing Rccrooftop Around The Periphery Over Existing6nos. Rcc Column 250Mm Dia.Periphery Circular / Hexagonal In Shape With Reinforced By 4 Mm Sq. Bar Covered By Glass Fiber Reinforced Polyester Or Vinyl Ester Resin Matrix, Approximately 50% Glass By Weight. A Synthetic Surface Veil Shall Be The Outermost Layer Covering The Exterior Surfaces. Glass Strand Roving’S Shall Be Used Internally For Longitudinal Strength. The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 And Panels Are About 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: = 0.2%, Synthetic Surface Veil Fabric Must Encase The Glass Reinforcementand Weigh About 12 Ounces Per Square Foot Depending On The Site Condition. All The Steel Column Surface And Other Exposed Surface Should Be Cover By Decorative “Frp” Laminates. The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.Relevant Construction And / Or Structural Drawings For All Frp Components Shall Be Submitted To The Eic For Approval In Accordance With The Requirements As Per This Specification.Frp Roof -Specification & Details Color : As Desired Material : Frpinner Size=4950 Mmtype=Circular / Hexagonal In Shapeheight = 2400 Mm Projection In Slab From Outer Column Face=300Mm ( Average ) Waterproof : Yes ( Attached Image In Annex.I ) 2 Manufacturing, Supplying, And Installing Of Frp Made Netaji With Horse Sculpture On Existing Base ( Approx.2.5 M Height ) High Quality Finish At Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading Withthickness Of 4 Mm.Rate Should Be Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Artistry Of The Knight Makes That The Center Of Attention Of This Larger-Than-Life-Size Set.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriage And All Other Incidentals Cost Governed By This Specification To Manufacture.Specification:Material: Fiberglass ( Raw Materials: Fiber Sheets, Resin, Hardener, Fiber Chalk Etc ) Height: 10 Ft. ( Approx. ) ( Attached Image In Annex.I ) 3 Supply, Installation, Testing And Commissioning Of Roman Antique Free Fall Fountain Forpark Under Buniadpur Municipality.The Bidder Is Advised To Visit The Proposed Site Under Municipality Where The Installations Are To Be Carried Out, Before Submitting Their Tender. It Is The Duty Of The Supplier To Ascertain That The System Supplied By Them Has To Fit To The Existing Area And Function Effectively And Efficiently As Per The Existing Specification.Specification Of Water Fountain 1. Pumps: Submersible Kirloskar 2 Hp For Electric Pump For Getting The Required Water Fountain.The Type, Power, Model, Make And Other Specifications Of The Pumps Should Be Mentioned In Case Of New.2. Frame: The Supporting Stands Of The Fountain Frame Should Of Suitable Non Corrosive Sections. 3. Pipes: Using Suitable Non Corrosive Sections For New And Utilised Existing Usable Upvc Pipe. 4 Nozzles: Nozzles Should Be Of Brass Or Suitable Non-Corrosive Metal For Trouble Free Operation. 5. Valves: Suitable Upvc Valves For Getting Fountain And Water Effects. 6. Cables: Isi Certified Submersible Cables Or Equivalent, Suitable For The Proper Functioning Of Fountain. 7. Lights: As Per Requirement.8. Control Panel: Suitable Control Panel For Running The Above. Details And Specifications Need To Be Specified And Consult With Dsda Electrical Engineering Team. The Power Supply Available At Site Is In Single Phase 210 Volts 50 Hertz And Three Phase 415 Volts, 50 Hertz Alternating Current Supply System And All The Equipment’S Supplied Should Be Made To Operate In The Above Power Supply System.9. Safety Standards: The Entire System Should Conform To All Safety Standards Demanded By Electrical Rule. ( Attached Image In Annex.I ) Frp Structure As Per Image. Supplying, And Installing Of Frp Madesculpture On Existing Basehigh Quality Finish At Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading Withthickness Of 4 Mm.Rate Should Be Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriage And All Other Incidentals Cost Governed By This Specification To Manufacture.Specification:Material: Fiberglass ( Raw Materials: Fiber Sheets, Resin, Hardener, Fiber Chalk Etc ) Height: 10 Ft. ( Approx. ) 4 Supply, Installation, Testing And Commissioning Of Roman Antique Free Fall Fountain Forpark Under Buniadpur Municipality.The Bidder Is Advised To Visit The Proposed Site Under Municipality Where The Installations Are To Be Carried Out, Before Submitting Their Tender. It Is The Duty Of The Supplier To Ascertain That The System Supplied By Them Has To Fit To The Existing Area And Function Effectively And Efficiently As Per The Existing Specification.Specification Of Water Fountain 1. Pumps: Submersible Kirloskar 2 Hp For Electric Pump For Getting The Required Water Fountain.The Type, Power, Model, Make And Other Specifications Of The Pumps Should Be Mentioned In Case Of New.2. Frame: The Supporting Stands Of The Fountain Frame Should Of Suitable Non Corrosive Sections. 3. Pipes: Using Suitable Non Corrosive Sections For New And Utilised Existing Usable Upvc Pipe. 4 Nozzles: Nozzles Should Be Of Brass Or Suitable Non-Corrosive Metal For Trouble Free Operation. 5. Valves: Suitable Upvc Valves For Getting Fountain And Water Effects. 6. Cables: Isi Certified Submersible Cables Or Equivalent, Suitable For The Proper Functioning Of Fountain. 7. Lights: As Per Requirement.8. Control Panel: Suitable Control Panel For Running The Above. Details And Specifications Need To Be Specified And Consult With Dsda Electrical Engineering Team. The Power Supply Available At Site Is In Single Phase 210 Volts 50 Hertz And Three Phase 415 Volts, 50 Hertz Alternating Current Supply System And All The Equipment’S Supplied Should Be Made To Operate In The Above Power Supply System.9. Safety Standards: The Entire System Should Conform To All Safety Standards Demanded By Electrical Rule. ( Attached Image In Annex.I ) Others ( Pumps, Frame, Pipes, Nozzles, Valves, Cables, Lights, Control Panel Etc. ) 5 Manufacturing, Supply, Installation Of Frp Model Biswa Bangla On Hand Covered By Artificial Grass At Park Under Buniadpur Municipality.High Quality Finishwith Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading Withthickness Of 4 Mm.Rate Should Be Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 Andabout 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: = 0.2%The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriage And All Other Incidentalscost Governed By This Specification To Manufacture.Specification:Material: Fiberglass ( Raw Materials: Fiber Sheets, Resin, Hardner, Fiber Chalk Etc ) Height: 8 Ft. ( Approx. ) ( Attached Image In Annex.I ) 6 Manufacturing, Supply, Installation Of Frp Model Mother With Chield Covered By Artificial Grass At Park Under Buniadpur Municipality.High Quality Finishwith Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading Withthickness Of 4 Mm.Rate Should Be Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 Andabout 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: = 0.2%The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture.Specification:Material: Fiberglass ( Raw Materials: Fiber Sheets, Resin, Hardener, Fiber Chalk Etc ) Height: 8 Ft. ( Approx. ) ( Attached Image In Annex.I ) 7 Manufacturing, Supplying, And Installing Of Garden Bench 3 Seater For Outside Seating With Cast Iron Leg Support Painted With Spray Paint For Shiny Lookand Seating Material Slats / Strips - 4Mm Thick And Strong Frp ( Fiber-Reinforced Plastic ) Is Strong And Durable Design To Take Load Up To 350 Kg. Distributed Across The Length.Relevant Construction And / Or Structural Drawings Shall Be Submitted To The Eic For Approval In Accordance With The Requirements As Per This Specification.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Dimension=69D X 160W X 88H Centimetersmaterial=Cast Iron, Frp ( Fiber-Reinforced Plastic ) Style = Gardensize=3 Seaterfurniture Finish= Natural Woodseat Height : 16 Inchesitem Weight : Not Less Than 55 Kgwaterproof : Yes ( Attached Image In Annex.I ) 8 Supplyingfitting And Fixing Frp Finished 3D Wall Muralwith Matt Finish, The Thickness Of The Frp Workis Ranges Between 4 Mm To 8 Mm.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Material=Frp ( Fiber-Reinforced Plastic ) Finish- Matt Thickness- 4 Mm To 8 Mm.Waterproof : Yes ( Attached Image In Annex.I ) 9 Supplying, And Installing Of Fiberreinforced Made Combination Covered With Artificial Grass Of Letter For The Word Buniadpur Municipality At Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading With Suitable Thickness According To The Height 1800 Mm Rate Should Be Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc .The Colour Should Be Made As Per Direction Of Eic.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriage And All Other Incidentals Cost Governed By This Specification To Manufacture.Height Of The Each Letter Not Less Than 1200 Mm ( Attached Image In Annex.I )

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work:Rate of different articles for Beautification of Buniadpur Bunicipal office Building
Sl. No. Item Description
1Manufacturing, supplying, and installing fiber composite structural sheet of decorative Gazebo top on existing rccroofTop around the periphery over existing6nos. RCC column 250mm dia.periphery circular/hexagonal in shape with reinforced by 4 mm sq. bar covered by glass fiber reinforced polyester or vinyl ester resin matrix, approximately 50% glass by weight. A synthetic surface veil shall be the outermost layer covering the exterior surfaces. Glass strand roving’s shall be used internally for longitudinal strength. The FRP having density may be between 1,2 g/cm3 and 2,0 g/cm3 and panels are about 0.09 inch in thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, water absorption: = 0.2%, synthetic surface veil fabric must encase the glass reinforcementand weigh about 12 ounces per square foot depending on the site condition. All the steel column surface and other exposed surface should be cover by decorative “FRP” laminates. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriageand all other incidentalscost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. Relevant construction and/or structural drawings for all FRP components shall be submitted to the EIC for approval in accordance with the requirements as per this specification. FRP Roof -Specification & Details Color : As desired Material : FRP Inner size=4950 mm Type=circular/ hexagonal in Shape Height = 2400 mm Projection in slab from Outer Column face=300mm(Average) Waterproof : Yes (Attached image in ANNEX.I)
2Manufacturing,Supplying, and installing of FRP made NETAJI WITH HORSE sculpture on existing base (approx.2.5 m height)high quality finish at site with fire resistive resin coatingand also extra strong UV-4 protected against fading withthickness of 4 mm. Rate should be included all structural framing work by iron angle,plate,nut and screw,welding work etc . The artistry of the knight makes that the center of attention of this larger-than-life-size set. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture. Specification: Material: Fiberglass (Raw Materials: Fiber Sheets, Resin, Hardener, Fiber Chalk etc )Height: 10 ft.(approx.)(Attached image in ANNEX.I)
3SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF ROMAN ANTIQUE FREE FALL FOUNTAIN FORPARK UNDER BUNIADPUR MUNICIPALITY. The Bidder is advised to visit the proposed site under Municipality where the installations are to be carried out, before submitting their tender. It is the duty of the supplier to ascertain that the system supplied by them has to fit to the existing area and function effectively and efficiently as per the existing specification. SPECIFICATION OF WATER FOUNTAIN 1. Pumps: Submersible kirloskar 2 hp for electric pump for getting the required water fountain.The type, power, model, make and other specifications of the pumps should be mentioned in case of new. 2. Frame: The supporting stands of the fountain frame should of suitable non corrosive sections. 3. Pipes: Using suitable non corrosive sections for new and utilised existing usable UPVC pipe. 4 Nozzles: Nozzles should be of Brass or suitable non-corrosive metal for trouble free operation. 5. Valves: Suitable UPVC valves for getting fountain and water effects. 6. Cables: ISI certified submersible cables or equivalent, suitable for the proper functioning of fountain. 7. Lights: As per requirement. 8. Control Panel: Suitable control panel for running the above. Details and specifications need to be specified and consult with DSDA electrical engineering team. The power supply available at site is in single phase 210 volts 50 Hertz and three phase 415 volts, 50 Hertz alternating current supply system and all the equipment’s supplied should be made to operate in the above power supply system. 9. Safety Standards: The entire system should conform to all safety standards demanded by electrical rule. (Attached image in ANNEX.I) FRP structure as per image. Supplying, and installing of FRP madesculpture on existing basehigh quality finish at site with fire resistive resin coatingand also extra strong UV-4 protected against fading withthickness of 4 mm. Rate should be included all structural framing work by iron angle,plate,nut and screw,welding work etc . The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture. Specification: Material: Fiberglass (Raw Materials: Fiber Sheets, Resin, Hardener, Fiber Chalk etc ) Height: 10 ft.(approx.)
4SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF ROMAN ANTIQUE FREE FALL FOUNTAIN FORPARK UNDER BUNIADPUR MUNICIPALITY. The Bidder is advised to visit the proposed site under Municipality where the installations are to be carried out, before submitting their tender. It is the duty of the supplier to ascertain that the system supplied by them has to fit to the existing area and function effectively and efficiently as per the existing specification. SPECIFICATION OF WATER FOUNTAIN 1. Pumps: Submersible kirloskar 2 hp for electric pump for getting the required water fountain.The type, power, model, make and other specifications of the pumps should be mentioned in case of new. 2. Frame: The supporting stands of the fountain frame should of suitable non corrosive sections. 3. Pipes: Using suitable non corrosive sections for new and utilised existing usable UPVC pipe. 4 Nozzles: Nozzles should be of Brass or suitable non-corrosive metal for trouble free operation. 5. Valves: Suitable UPVC valves for getting fountain and water effects. 6. Cables: ISI certified submersible cables or equivalent, suitable for the proper functioning of fountain. 7. Lights: As per requirement. 8. Control Panel: Suitable control panel for running the above. Details and specifications need to be specified and consult with DSDA electrical engineering team. The power supply available at site is in single phase 210 volts 50 Hertz and three phase 415 volts, 50 Hertz alternating current supply system and all the equipment’s supplied should be made to operate in the above power supply system. 9. Safety Standards: The entire system should conform to all safety standards demanded by electrical rule. (Attached image in ANNEX.I) Others (pumps,Frame,Pipes,Nozzles,Valves,Cables,Lights,Control panel etc.)
5Manufacturing, Supply, installation of FRP model Biswa Bangla on hand covered by artificial grass at park under Buniadpur municipality.High quality finishwith fire resistive resin coatingand also extra strong UV-4 protected against fading withthickness of 4 mm. Rate should be included all structural framing work by iron angle,plate,nut and screw,welding work etc . The FRP having density may be between 1,2 g/cm3 and 2,0 g/cm3 andabout 0.09 inch in thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, water absorption: = 0.2% The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentalscost governed by this specification to manufacture. Specification: Material: Fiberglass (Raw Materials: Fiber Sheets, Resin, Hardner, Fiber Chalk etc ) Height: 8 ft.(approx.) (Attached image in ANNEX.I)
6Manufacturing, Supply, installation of FRP model Mother WITH CHIELD covered by artificial grass at park under Buniadpur municipality.High quality finishwith fire resistive resin coatingand also extra strong UV-4 protected against fading withthickness of 4 mm. Rate should be included all structural framing work by iron angle,plate,nut and screw,welding work etc . The FRP having density may be between 1,2 g/cm3 and 2,0 g/cm3 andabout 0.09 inch in thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, water absorption: = 0.2% The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriageand all other incidentalscost governed by this specification to manufacture. Specification: Material: Fiberglass (Raw Materials: Fiber Sheets, Resin, Hardener, Fiber Chalk etc ) Height: 8 ft.(approx.) (Attached image in ANNEX.I)
7Manufacturing, supplying, and installing of Garden bench 3 seater for outside seating with cast iron Leg Support painted with Spray Paint for shiny lookand Seating Material Slats/Strips - 4mm thick and strong FRP (Fiber-Reinforced Plastic) is Strong and durable design to take load up to 350 Kg. distributed across the length. Relevant construction and/or structural drawings shall be submitted to the EIC for approval in accordance with the requirements as per this specification. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriageand all other incidentalscost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Dimension=69D x 160W x 88H Centimeters Material=Cast Iron,FRP(Fiber-Reinforced Plastic) Style = Garden Size=3 Seater Furniture Finish= Natural Wood Seat Height : 16 Inches Item Weight : Not less than 55 Kg Waterproof : Yes (Attached image in ANNEX.I)
8Supplyingfitting and fixing FRP finished 3D wall muralwith Matt finish, the thickness of the FRP workis ranges between 4 mm to 8 mm. The Manufacturer/supplier shall provide full details of the FRP materials, including all associated manufacturing processes, test certificates, adhesive, and fasteners. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriageand all other incidentalscost governed by this specification to manufacture the FRP components in accordance with any structural drawings provided by the EIC. Material=FRP(Fiber-Reinforced Plastic) Finish- Matt Thickness- 4 mm to 8 mm. Waterproof : Yes (Attached image in ANNEX.I)
9Supplying, and installing of Fiberreinforced made combination covered with artificial grass of letter for the word " BUNIADPUR MUNICIPALITY" at site with fire resistive resin coatingand also extra strong UV-4 protected against fading with suitable thickness according to the height 1800 mm Rate should be included all structural framing work by iron angle,plate,nut and screw,welding work etc . The Colour should be made as per direction of EIC. The Manufacturer/supplier shall responsible for all labour, materials, equipment, carriage and all other incidentals cost governed by this specification to manufacture. Height of the each letter not less than 1200 mm (Attached image in ANNEX.I)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail