Uttarakhand Power Corporation Limited-UPCL has published Construction Of Second Floor Building Above R-Apdrp Part-A/Ipds Floor At Vcv Gabar Singh Urja Bhawan, Dehradun (Steel Structure With Aluminium Partition) . Submission Date for this Tender is 26-05-2022. Building Work Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-May-2022 | FINANCIAL BID | Financial Bid | 26-05-2022 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level: 1:2 :4 ( 1 Cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded 40 mm nominal size) |
| 4 | Reinforced cement concrete working beams, suspended floors, roofs having slope up to 1.5 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral/ stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500 D or more. |
| 7 | Brick work with F.P.S.Bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes for Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 8 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above planth level up to floor V level. Cement morat 1:4 ( 1 cement : 4 coarse sand) |
| 9 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platform, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etccomplete at all levels. Raj Nagar plain white marble/Udaipur green marble/Zebra black marble Area of slab up to 0.50 sqm. |
| 10 | Same as above but for Area of slab over 0.50 sqm |
| 11 | Extra for providing edge moulding to 18 mm thick marble stone conters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge for Marble work |
| 12 | Same as above but for Granite work |
| 13 | Mirror polishing on marble work/Granite work/stone work ever required to give high gloss finish complete |
| 14 | Providing and fixing expansion hold fasteners on C.C/R.C.C. surface backing including drilling necessary holes and the cost of bolt etc. complete Wedge expansion type fasteners with threaded dia 6 mm. |
| 15 | Same as above but for fasteners with threaded dia 10 mm |
| 16 | Same as above but for fasteners with threaded dia 12 mm |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bootle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately).Second class teak Wood |
| 19 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 21 | Providing & fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chormium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc. wherever necessary action 25mm dia |
| 22 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block100x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 23 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. |
| 24 | Providing and fixing IS 3564 marked aluminum die cast body tubular type universal hydraulic door closer with necessary screw etc. |
| 25 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm |
| 26 | Same as above but for 250x16 mm |
| 27 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm |
| 28 | Same as above but for 150x10 mm |
| 29 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm |
| 30 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125mm |
| 31 | Same as above but for 100mm |
| 32 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twinrubber stopper |
| 33 | Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 34 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, . work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture"s specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS:2095: part I |
| 35 | 66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS : 14862 with suitable fibre cement screws |
| 36 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 37 | Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of intemal dia 140 mm ,73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S sheet box by means of 3.3 mm dia, roun headed screws, one lock at the comers. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. |
| 38 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, rackets,gates and similar works. |
| 39 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with Second class teak wood |
| 40 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS; 15622 of approved make in colours such as White, lvory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 ( 1 cement :4 Coarse sand ) including pointing the joints with white cement and matching pigment etc, complete. |
| 41 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption,s less than 0.08% and conforming to IS 15622of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand ) including grouting the joints with white cement and matching pigments etc, complete. size of Tile 60x60cm |
| 42 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 43 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 44 | Gutter .(600 mm over all girth) |
| 45 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metaliz |
| 46 | Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceilng and held in position by criss- crossing Gl wire. |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 48 | Same As above but for 110 mm |
| 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion..Coupler 75 mm |
| 50 | Same As above but for 110 mm |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming toIS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door 75x75x75 mm |
| 52 | Same As above but for110x110x110 mm |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee without door 75x75x75 mm |
| 54 | Same As above but for110x110x110 mm |
| 55 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee without door 75x75x75 mm |
| 56 | Same As above but for110x110x110 mm |
| 57 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm |
| 58 | Same as above but for 110 mm |
| 59 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified |
| 60 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented, textured or smooth as specified.2 mm thick flat |
| 61 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) |
| 62 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand): |
| 63 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 64 | Extra for providing andmixing water proofing material in cemnt plaster work in proportion recommended by the manuafacturers. |
| 65 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepate the surfac even and smooth complete |
| 66 | Distempering with oil bound washable distemper or approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer. |
| 67 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm |
| 68 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 69 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 70 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 71 | Forming groove of uniform size from 12x12mm and upto 25x15mm inplastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. |
| 72 | Demolishing RCC work manually / by mechanical means including stacking of steel bars anddisposal of unserviceble material within 50mtr. Lead as per direction of Engineer in charge. |
| 73 | Demolishing brick work manually / by mechanical means including stacking of serviceble material and disposal of unserviceble materialwithin 50mtr. Lead as per direction of Engineer in charge in cement mortar |
| 74 | Removing mortar from bricks and cleaing bricks including stacking with lead of 50 mtr.(Stacks of cleaned bricks shall be measured )From brick work in cement mortar |
| 75 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead, for all leadsincluding all lifts involved. |
| 76 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 77 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 78 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps(all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outletgrating and other couplings in C.P. brass, including painting of fittings andcutting and making good the walls and floors wherever required . |
| 79 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 80 | Providing and fixing stainless steel AISI 304 (18/8) kitchen sink as per IS 13983 with CL brackets and stainless steel plug 40 mm including painting of fitting and brackets, cutting and making good the walls wherever reqqired: Kitchen sink without drain board 610x460 mm bowl depth 200 mm |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe- |
| 82 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 83 | Providingand fixing 600x120x5mm glass shelf with edges round supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm ong scrws, rawlplugs etc. complete. |
| 84 | Providing & fixing toilet paper holder C.P. brass |
| 85 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet-----------Sand Cast Iron S&S as per IS- 1729. |
| 86 | Providing & fixing G.I.pipescomplete with G.I. fittings and clamps including cutting and making good the walls etc.15 mm dia. nominal bore (Internal work exposed on wall) |
| 87 | Same as above but for 20mm dia. nominal bore |
| 88 | Same as aboveBut For 25 mm dia nominal bore |
| 89 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia. nominal bore |
| 90 | Same as above but for 20 mm dia. nominal bore |
| 91 | Same as above but for 25 mm dia nominal borr |
| 92 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore |
| 93 | Same as above but for 20 mm nominal bore |
| 94 | Same as above but for 25 mm dia nominal borr |
| 95 | Providing and fixing uplasticised PVC connection pipe with brass unions for 45 cm length 15 mm nominal bore |
| 96 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 15 mm nominal bore |
| 97 | Same as above but for 20 mm nominal bore |
| 98 | Same as above but for 25 mm nominal bore |
| 99 | Providing and placing on terrace (at all floor levels) polyethylene water stonrage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for nilet, outlet and overflow pipes but without fittings and the base support for tank. |
| 100 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 (15mm nominal bore). |
| 101 | Providing & fixing C.P brass long body bib cock of approved quality conformingto IS standards and weighing not less than 690 gms15 mm nominal bore |
| 102 | Providing and fixing C.P. brass stop cock (concealed ) of standard design and of approved make conforming to IS:8931. (15mm nominal bore) |
| 103 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore |
| 104 | Providing and fixing PTMT grating of approved quality and colour.Circular type.--------100 mm nominal dia. |
| 105 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 106 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 107 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required (Fitting shall be paid for separately) |
| 108 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 109 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directionsof Engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item):With float glass panes of 5.50 mm thickness |
| 110 | Providing & fixing double action hudraulic floor spring of approved brand and manufacure IS:6351 marked, four doors including cost of cuttting floors as required embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in charge with stainless steel cover plate. |
| 111 | Providing & fixing 100 mm brass locks (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete |
| 112 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 113 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixingrrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 114 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 115 | Engaging of suitable beldar for petty work |
| 116 | Engaging of suitable carpenter with kit for petty work |
| 117 | Engaing of suitable plumber/fitter with kit for petty work |
| 118 | Engaging of suitable wireman/electrician with kit for petty work |
| 119 | Engaging of suitable sweeper for petty work |
| 120 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 121 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper onductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group A |
| 122 | Twin control point wiring in PVC conduit, with pianotype switch:Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 123 | Wiring for light point/ fan point/ exhaust fan point/ call bell pointwith 1.5 sq.mm FRLS PVC insulated copper conductor singlecore cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 124 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x1.50 sq.mm +1x1.5sqm |
| 125 | Same as above but for 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 126 | Same as above but for 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 127 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair |
| 128 | Supplying and fixing of following sizes of medium class PVCconduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 129 | Same as above but for 25 mm |
| 130 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch |
| 131 | 3 pin 5/6 amp socket outlet |
| 132 | 6 pin 15/16 amp socket outlet |
| 133 | . Telephone socket outlet |
| 134 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required .5/6 A switch |
| 135 | 2 way 5/6 A switch |
| 136 | 15/16 A switch |
| 137 | 3 pin 5/6 A socket outlet |
| 138 | 6 pin 15/16 A socket outlet |
| 139 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 140 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 141 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 142 | Supplying and fixing suitable size GI box with modular plateand cover in front on surface or in recess, including providingand fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 143 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 144 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 145 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.1 or 2 Module (75mmX75mm) |
| 146 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 147 | Providing and fixing following rating and breaking capacityand pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 250 A, 25 KA,TPMCCB |
| 148 | Supplying and fixing following way, single pole and neutral, sheetsteel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar,interconnections, powder painted including earthing etc as required. (But without MCB/RCCB/Isolator) 8 way, Double door |
| 149 | Same as above but for 12 way, Double door |
| 150 | Supply and fixing 5 amps to 32 amps rating, 240 volts, "C" serise, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral |
| 151 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DP complete with connections, testing and commissioning etc. as required 40 amps |
| 152 | Same as above but for 63 amps |
| 153 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DP complete with connections, testing and commissioning etc. as required 40 amps |
| 154 | Same as above but for 63 amps |
| 155 | Same as above but for 100 amps |
| 156 | Supplying and fixing following rating four pole TPN 415 volts, residual current breaker (RCCB) having a sensitivity current upto 300 miliamperes in the existing MCB DB complete with connections. Testing and commissioning etc. as required 40 amps. |
| 157 | Same as above but for 63 amps |
| 158 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including assessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.( but with charcole or coke and salt ) as required. |
| 159 | Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 160 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) |
| 161 | P/Fsliding channel rods for Venetian blinds of approved make & shade with necessary fittings etc. complete or as per approved by Engineer in charge including all labour, material, T&P etc proper completion of the work as per direction Engineer in charge. |
| 162 | P/Fvenetian blinds 100 mm wide of approved make & shade (Mac & Vista) The colour scheme to be same as per approved by Engineer in charge including all labour material, T&P etc. proper completion of the work as per direction Engineer in charge |
| 163 | S/F Bajaj/Havells/Orient or Equivalent box type batten Ecobox 36/40W 240V Electronic fluorescent tube fitting complete with all labour material, T&P etc. required for proper completion of work. |
| 164 | Supply and fixing 08 watt CFL bajaj / vipro or approved quality including of all labour, T&P for proper completion of work. (Rate as per approval no. 3686/MD/A-1 dt. 25.05.2012) |
| 165 | Supply and fixing 15 watt CFL bajaj / vipro or approved quality including of all labour, T&P for proper completion of work. (Rate as per approval no. 3686/MD/A-1 dt. 25.05.2012) |
| 166 | Supply and fixing 20 watt CFL bajaj / vipro or approved quality including of all labour, T&P for proper completion of work. (Rate as per approval no. 3686/MD/A-1 dt. 25.05.2012) |
| 167 | Supply and fixing wall fan 400 mm sweep bajaj/usha make of approved quality including of all labour, T&P for proper completion of work (Rate as per approval no. 3686/MD/A-I dt 25.05.2012) |
| 168 | Supply and fixing A.C. box (plug and socker board ) two pole Havells make orapproved quality including of all labour, T&P for proper completion of work (Rate as per approval no. 2245/MD/A-I dt 08.10.2010) |
| 169 | S/F Ceiling Fan of Khaitan /Bajaj/Usha or approved make including all labour, material, T&P etc. proper completion of the work as per direction Engineer in charge. |
| 170 | Supply and fixing Aluminium door handle 8" long forapproved quality including of all labour, T&P for proper completion of work (Rate as per approval no. 3686/MD/A-I dt 25.05.2012) |
| 171 | Supplying installation, testing and commissioning of 300 mm sweep, exhaust fan suitable for 230 volts, single phase AC supply in the existing opening including making the hole to suit the size of the above fan and making good the same etc. as required. |
| 172 | P/F electric call bell with necessary fitting wire etc. of different voice of approved quality complete in all respect |
| 173 | P/F CP brass jet over European type seat of approved quality complete in all respect. |
| 174 | M&L for cleaning of roof slab including picking sweepling, cleaning & washing down with water to remove dust and providing water proofing treatment as described as under : (A) applying a coat of ENIROOF EMB with help of brushes on cleaned RCC slab(B) laying a layer of fiber cloth on wet EMB coating & applying another coat of ENIROOF EMB(C) after drying the surface finally applying a coat of ENIROOF SPR as per manufactured instruction by star coating (D) fixing membrane as directed. |
| 175 | Providing and fixing Ceiling panel light 42w LED 4000K of approved brandincluding installation/ Fixing, approved brand T & P etc. as requried.. |
| 176 | Providing and fixing in Ceiling down lighter LED (Ultra Slim) 12W Square of Approved brand Philips or equivalent etc including all labour, material, T&P etc. proper completion of the work as per direction Engineer in charge. |
| 177 | Providing and fixing 20/22W LED tube(Maxoled) with double side connection etc. including all labour, material, T&P etc. proper completion of the work or as per direction Engineer in charge. |
| 178 | Providing and fixingUrinal Spreader of S.S. Make of approved brand including all labour material, T&P etc. proper completion of the work or as per direction Engineer in charge |
| 179 | Providing & Fixing 150 mm stainless steel lock (150x150 mm) best make of approved quality for toughened glass door , including necessaray S S Screw making goods etc complete. |
| 180 | Providing & Fixing stainless steel handle best make of approved quality (32mmx302x457 mm) for toughened glass door , including necessaray S S Screw making goods etc complete. |
| 181 | P/F 16 Swan neckcock pillar cock of cera ""Nebco or approved quality complete in all respect.(Extra Item no 0070/SE(HQ) Dated 16-05-2016) |
| 182 | P/F 80/100 mm dia C.I. D-Joint with ring rubber packing nut, bolt and washer etc. complete as per direction of E/I |
| 183 | Supply and replacing of 15 mm dia tee/socket/elbow/bend etc. for repair of pipeline complete, including all material , labour, T&P etc. required for proper completion of work |
| 184 | Supply and laying of aluminium conductor PVC insulated unarmed, served, sheathed cable 1100V grade on surface cable run shall be fixed on MS clamp etc. of suitable size or as directed by Engineer in charge complete in all repect. The armed ring of the cable shall be property connected with the earth conductor by clamp etc.For 4 x 10 Sqmm |
| 185 | P/FHorizontal Aluminium ventian blinds 25mm wide of approved make & shade. The colour scheme to be same as per approved by Engineer in charge including all labour material, T&P etc. proper completion of the work as per direction Engineer in charge. (Already approved by Approval No. 20/SE(HQ)/UPCL dated 12.10.2017) |
| 186 | P/F15 mm dia CP extension piece 1-2 " long for Angle cock, long body & short body of approved quality complete in all respect. |
| 187 | Hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, diesel consumption in ordinary soil and operator) |
| 188 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephoneBVcable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair |
| 189 | Providing & Fixing 150 mm stainless steel lock (150x150 mm) best make of approved quality for toughened glass door , including necessaray S S Screw making goods etc complete. |
| 190 | Disposal of debris/garbage outside the corporation area including all labour T&P etc. required for proper completion of work. |
| 191 | P/F Counter wash basin Hindware or approved brand withfitting approved quality |
| 192 | Providing and fixing mirror of superior frameless glass (of approved quality) and of required shape and size of approved make and shade with 6 mm thick including all labour, material, T&P etc. proper completion of the work or as per direction Engineer in charge. |
| 193 | P/F liquid Soap dispenser |
| 194 | P/F Towal Ring |
| 195 | P/F urinal Spreader |
| 196 | |Sun Control Film |
| 197 | P/F 24 W led tube light |
| 198 | Providing and laying 12mm thick thermal wrao Tm super plus sheet to protect GI iron profile sheet from sun heat. Approved by SE no.04/SE(HQ)RATE DATE 27/05/2020 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
