Fabrication And Supply Of Expansion Bellows As Per Nit , Spares Expansion Bellow -Fs Rc Expn. Joint Size: 1310X1310; Sty.4 Rt Per Rm Upto & Incl 63Mm Pl Thick Add Joints Of Cs Sheet / Pl Upto 4 Mm / Rm Add Joints Of Cs Plate 5 To 10 Mm / Rm Add J, Tiruchirappalli-Tamil Nadu

Fabrication And Supply Of Expansion Bellows As Per Nit , Spares Expansion Bellow -Fs Rc Expn. Joint Size: 1310X1310; Sty.4 Rt Per Rm Upto & Incl 63Mm Pl Thick Add Joints Of Cs Sheet / Pl Upto 4 Mm / Rm Add Joints Of Cs Plate 5 To 10 Mm / Rm Add Joints Of Cs Plate 12 To 20 Mm / Rm Add Joints For Cs Plate 21 - 25 Mm / Rm Add Joints For Cs Plate 26 - 32 Mm / Rm Add Joints For Cs Plate 33 - 36 Mm / Rm Add Joints For Cs Plate 37 - 40 Mm / Rm Add Joints For Cs Plate 41 - 50 Mm / Rm Add Joints For Cs Plate 51 - 56 Mm / Rm Add Joints For Cs Plate 57 - 70 Mm / Rm Add Joints For Cs Plate 71 - 100 Mm / Rm Add Joints For Cs Plate Above 100 Mm / Rm Add Joints Of As Sheet / Pl Upto 4 Mm / Rm Add Joints Of As Plate 5 To 10 Mm / Rm Add Joints Of As Plate 12 To 20 Mm / Rm Add Joints For As Plate 21 - 25 Mm / Rm Add Joints For As Plate 26 - 32 Mm / Rm Add Joints For As Plate 33 - 36 Mm / Rm Add Joints For As Plate 37 - 40 Mm / Rm Add Joints For As Plate 41 - 50 Mm / Rm Add Joints For As Plate 51 - 56 Mm / Rm Add Joints For As Plate 57 - 70 Mm / Rm Add Joints For As Plate 71 - 100 Mm / Rm Add Joints For As Pl Above 100 Mm / Rm Joints Beam / Channel Upto 204 Mm / Joint Joints Beam / Channel Above204-304Mm / Joint Joints Beam / Channel Above304-450Mm / Joint Joints Of Angles Upto 75X75x8 Joints Of Angles > 75X75x8 Upto 100X100x12 Joints Of Angles Above 100X100x12 Joints In Beam / Channel Above 450 Mm Add Joints Of Ss Sheet / Pl Upto 4 Mm / Rm Add Joints Of Ss Plate 5 To 10 Mm / Rm Add Joints Of Ss Plate 12 To 20 Mm / Rm Add Joints Of Ss Plate 21 To 40 Mm / Rm Joints In Cs Hanger Rods Upto Dia 25 Mm / Joint Joints In Cs Hanger Rods 26 - 50 Mm / Joint Joints Cs Hanger Rods 51Mm&Above / Joint Joints In As Hanger Rods Upto Dia25mm / Joint Joints In As Hanger Rods 26 - 50 Mm / Joint Joints As Hanger Rods 51Mm & Above / Joint Joints Ss Hanger Rods Upto Dia 25Mm / Joint Joints In Ss Hanger Rods 26 - 50 Mm / Joint Joints Ss Hanger Rods 51Mm &Above / Joint Furnace Ht Normalizing , Tempering And Stree Relieving Rate Each Cycle Solution Annealing Local Stress Relieving Of Plate Butt Joints Furnace Ht Of Hanger Items > 1 M ( No. Of Cycles - Not Applicable ) Labour Cost For One Coat Of Painting Nitriding Of Component ( Job Wt ) Electro-Galvanizing And Chromotizing Of Threaded Portions Per Kg Of Component Wt. Stellite Welding Synthetic Enamel Long Alkyd To Is 2932 Red Oxide Primer To Is:2074 / Is:12744 / Rust Preventive Oil Ral 9002 Primer Paint Inorganic Ethyl Zinc Silicate Primer Epoxy Finish Paint Epoxy Zinc Phosphate Primer Epoxy Based Polyamide Cured Tio2 / Mio Paint Chlorinate Rubber-Based Zinc Phosphate Primer Chlorinated Finish Paint Heat Resistant Aluminium Paint -Grade 2 / Grade 1 Aliphatic Acrylic Polyurethane Epoxy Polyamide Cured Finish Paint Epoxy Glass Flake Paint Moisture Curing Ethyl Zinc Silicate Primer Coat ( Minimum 80% Metallic Zinc Content ) 1 / 2Hb Epoxy Zinc Rich Primer ( 80% Zn Dust Pigment ) Blast Cleaning Of Jobs Above 30 Mt Blast Cleaning Of Jobs Above 20 Mt & Up To 30 Mt Blast Cleaning Of Jobs Above 15 Mt & Up To 20 Mt ) Blast Cleaning Of Jobs Above 10 Mt & Up To 15 Mt Blast Cleaning Of Jobs Above 5 Mt Blast Cleaning Of Ducts ( Above 100 Kg & Up To 5 Mt ) Blast Cleaning Of Jobs Upto 50 Kg Blast Cleaning Of Jobs Above 50 Kg Blast Cleaning Of Running Metre Items ( Up To 100 Kg ) Blast Cleaning Of Running Metre Items ( Above 100 Kg ) Blast Cleaning Of Jobs Above 100Kg To 5 Mt ( Other Than Ducts ) Machining - Plain Turning ( Per Kg Of Material Removed ) Deduction Of Dts ( 0 - 80 Km ) Deduction Of Dts ( 80 -175 Km ) Deduction Of Dts ( 175 - 350 Km ) Non - Ferrous Scrap Non - Ferrous - Turnings & Borings Scrap Cs / As Sheets , Plates & Structurals Ferrous Tubes And Pipe Scrap Ss Scrap ( Magnetic ) Ss Scrap ( Non-Mgnt ) Other Than 310 / 310S Ss Scrap ( Non-Mgnt ) 310 / 310S Big Size Scrap ( As / Cs ) Turnings & Borings Scrap ( Cs / As ) Turnings & Borings Scrap ( Ss Mgnt ) Turnings & Borings Scrap ( Ss Non-Mgnt ) Non Return Consumables ( Like Ropes , Etc ) => Limited

Refer document

Refer document

Refer document