Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-05-2022 | Modification in the NIT. | Other | 26-05-2022 |
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 6 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). White sand stone - 30mm thick gang saw cut stone |
| 7 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in truehorizontal & vertical lines/planes. (Only structural steel frame work shallbe measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). |
| 8 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. |
| 9 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 10 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 11 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x63x3.2 mm |
| 12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 13 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 14 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm |
| 15 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 16 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 17 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece |
| 18 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 21 | Providing and laying vitrified floor tiles (double charge) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 22 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm |
| 23 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 24 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) |
| 25 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 27 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately). |
| 28 | Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. |
| 29 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 30 | DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 31 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 32 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 33 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 34 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 35 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 36 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 37 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 38 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 40 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern |
| 41 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 43 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. ofquality and make as approved by Engineer - in - charge. |
| 44 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 45 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 46 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 47 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS : 3989 |
| 48 | Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 3989 |
| 49 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 25 mm nominal outer dia Pipes |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes |
| 53 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 54 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 55 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms |
| 56 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long, weighing not less than 110 gms |
| 57 | Providing and fixing PTMT bib cock of approved quality and colour. Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 58 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 |
| 59 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 60 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 61 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 62 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face fine dressed with rough backing. 30 mm thick |
| 63 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 64 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 65 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement |
| 66 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 67 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 69 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 70 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 71 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 72 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation.Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.\" |
| 73 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 74 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 75 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete |
| 76 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts |
| 77 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 78 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 79 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 80 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 81 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 120 mm |
| 82 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 83 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 84 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 85 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 86 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 87 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 88 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm |
| 89 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 90 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 91 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 92 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 93 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in approved design. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. All completed as per direction of Engineer-in- charge. |
| 94 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 95 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 |
| 96 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 97 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 98 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil |
| 99 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 100 | Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.” Note : Excess/less cement used than specified in this item is payable/ recoverable separately. All works upto plinth level : M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) |
| 101 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 102 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone |
| 103 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 104 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 105 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 106 | Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade \"A\" sealing compound. |
| 107 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 108 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in- charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). |
| 109 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 110 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 111 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer\"s specifications & direction of Engineer- in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approvedcolour, design & pattern. |
| 112 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe |
| 113 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 114 | Granite work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm. |
| 115 | Providing & fixing GRC brick tile of size 230x75x12mm for wall clading work upto 10m height over an underlayer of 12mm Cement plaster (1:3) furrig the under layer with scratching tool and cement jointing with grey slurry@ 3.3kg per sqm, and forming uniform groove of size 8mm x 8mm including cost of scafolding etc. complete as per direction of enginner in charge. |
| 116 | Providing and fixing 30 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture fixed with epoxy resin based adhessive i/c joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cleaning moulding and polishing to edge to give high gloss finish etc. complete at all levels as per direction of engineer-in-charge. |
| 117 | Total |
| 118 | Add Cost Index 21.46%:- |
| 119 | Total |
| 120 | Less 9.50% as per Delhi Govt. Circular:- |
| 121 | Total |
| 122 | Making groove 10 mm wide and 50 mm deep in C.C. Pavement with groove cuter including cleaning and finishing etc. Complete as per direction of Engineer-in-Charge. |
| 123 | Providing and fixing in position wall paneling of Credence grooved wood panels esto of width 192mm, thickness of 16mm and length 2440 mm made up of high-density fibre board with minimum density of 800 Kg/m3 substrate with a laminated facing as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3 mm grooves at 21mm pitch. The edges of the panels shall be “tongued-and-grooved” to receive special clips for installation. The back of the perforated panels shall have sound absorbing non-woven acoustical fleece and backed with 50 mm thick rock wool layer as directed by the Engineer-in-Charge. The panels shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install G.I stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall using screws at spacing of 600mm centre-to-centre. Screw the aluminium channel (keel) on channelled G.I stud 600mm centre to centre. Install the first set of wooden panels by inserting the clips. For border channel insert the groove of the panel in-to the projecting flange of the clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channel into the next aluminium channel (keel) and simultaneously fill the gap between wall & panel with 50 mm thick rock wool having density of 48 kg/m3. Continue the process till the actual height is achieved. Use clips for border channel to finish off the installation, finish the edges using wood moulding of matching colour (to be provided by others) as approved by Engineer-in- Charge. The installed panels should give an NRC of 0.9. |
| 124 | Providing& fixing in position wall panelling at all heights of thickness 25 mm with Credence Fiber Glass Acoustical Wall Panels of size 600X600 /600x1200 mm creda, resin bonded square edges having NRC of 0.9 minimum. The panels should be manufactured from high density bio-soluble resin bonded glass wool absorber having density of 96 Kgs/m3 and wrapped on the front side with an acoustically transparent fabric having option of colours and fabric options like jute etc. as per approved by architect/engineer-in-charge, plain tissue backer and fabric wrapped hardened edges. Panels should have humidity resistance up to 90 %, thermal conductivity = 0.03 (m² k / w) thermal resistance = 0.9 (m² k / w) & moisture rate = 1% (JC/T670 – 2005). The panel should be fully recycled and fire retardant as per Class A. The installation comprises surface impalers having projecting elements called spikes shall be fixed on the plain surface at 1200 mm center to center horizontally and 600 mm center to center vertically or as per approved by engineer-in-charge, using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall Panels shall be pierced through the spikes of the impalers ensuring line & level of panel are maintained. The panels should be mounted on the impalers horizontally or vertically as per the approved design or as per the directions of the engineer-in-charge. |
| 125 | Providing and fixing 12mm thick cleared or required colour multi wall polycarbonate sheet (PC lite or GE Brand Lexan or equivalent make ). The multi wall polycarbonate sheet shall be fixed on tubular steel structure with 25 micron thick powder coated aluminium Allox section 60mm top and bottom profile and weather proof EPDM Gasket on both side of joints so as make the whole structure water tight as per approved design / drawing. The Allox aluminium section with powder coating of 25 micro shall be fixed in joints and both end of polycarbonate sheet to fix the sheet rigidly on steel frame structure. The weather proof EPDM Gasket and aluminium profile shall be fixed and sealed with silicon (Winsil-20) to make the joints fully water proof. The overhang end of polycarbonate sheet to be shielded with powder coated / anodised with 25 micro aluminium channels. The polycarbonate sheet and profile shall be fixed with self taping and self drilling 55mm long steel screws fixed not more than 300mm centre to centre. The rate shall be inclusive of cost of all material involved such as polycarbonate sheet, Allox system aluminium profile and channel, EPDM Gasket, self taping screws, nuts, bolts, riverts, silicon sealant or any other materialrequired for fixing the sheet but excluding the cost of steel structure which shall be paid separately. The cost also include the rate of labour require for cutting, bending and fixing of polycarbonate sheet aluminium profile, hoisting in position etc, complete at all height as per the direction of Engineer-in-charge. The rate shall also include the cost of all T & P and safety precaution required during execution of the work. All aluminium section shall be minimum powder coating of thickness not less than 25 micro. The work shall be complete in all respect as per the architectural drawings and the direction of Engineer-in-charge. |
| 126 | Providing and laying (10+5 mm ) thick (average) sports flooring ofTwo Layer Permeable EPDM&SBR System approved by FIBA product and specificationsystem on the concrete surface as per detail given below :-a) 1st layer PU (Poly Urethene)/ Primer coat on existing hard base including cleaning the existing surface.b) 2nd layer of 10 mm thick Black SBR (Styrene Butadience Rubber) granules 1-3.5mm thick mixed with 18-20% single component PU binders.c) 3rd & top layer5mm thick colouredEPDM (Ethylene Propylene Diene Monomer) rubber granules coloured 0.5-2.5mm thickmixed with 18-20% single component PU binders. All complete as per direction of Engineer-in-Charge and as per manufacturers specifications. |
| 127 | Providing and laying weather and Ultravoilet Resistant, Water Repellent, Dust, Dirt and Stain Resistant, Fungus and Algae Resistant natural none pigmented texture (95 to 98% natural crushed stone dust/powder and 2 to 5% other pigments) of approved make with final coat of texture with stone chips (attainable thickness: 0.70 to 0.90mm to offer grooved finish) applied with trowel over a coat of texture without chips (attainable thickness: 0.50 to 0.70mm to offer smooth surface as base coat) over a repair check with exterior grade putty over a coat of acrylic primer mixed with wall sealer in the ratio of 1:1 complete as approved by Engineer-in-charge. Finally one coat of water base acrylic protection coat applied with roller and brush to make surface streak resistance. |
| 128 | Surface preparation with emery paper / wire brush/washing, supply and application of one coat of Polysiloxane Paint with total DFT of 60 microns applied @ 0.90 ltr/10 Sqm with all tools, tackles and spray machine including Scaffolding/Crain Charges etc. to give an even shade as per direction of Engineer-in-charge. (Item is to be executed for roof shed and trust of stadium upto all height, nothing shall be paid extra on account of height, scaffolding etc.) |
| 129 | Providing and fixing Stainless Steel letters for making premises/sports complex name and address, logo on ACP sheet including all fixing nut bolts, screws etc. arrangement at all height all complete as per direction Engineer-in-charge. (Scaffolding will be paid separately). |
| 130 | Providing and fixing SITC OF AUTOMATIC BOOM BARRIER of below specification:- Supply voltage: 230 V~ ± 5% - 50/60 HzMotor power : 80 WMotor speed : 1400 rpmOpening/closing time : 3 secMax. Length : 5 mIntelligent Control Board Barrier Colour Silver/Grey ColourRed/Green Arrow indication on barrier body Electromechanical Drive Mechanism Illuminated Boom Arm(Red/Green) Reverse on Obstable Detection Duty Cycle 100 %IP Rating : IP 55RS 485 CommunicationWorking temperature: -20° Cto + 65° CComplete in all respect Approved Makes: Houston Systems (HOUSYS), First idea Automation (FIA), Magnetic Auto Control |
| 131 | Providing and fixing UHF Long range RFID Reader of below specification:-Tag Read Range 06-12 meter or more, Freq Range Standard ISM 902~928 MHZ or ISM 865~868 MHZ,Operating Mode FHSSReading Speed Software programmable, Average Reading per 64Bits : <6msReading Mode Timing or Touch Software programmable Capability Simultaneous multiple tag read capability-Reading Clue BuzzerRF Power 0-30 dBm software adjustableData Ports RS 485/ RS 232/ Wiegand 26/32/34/ TCP/IP Antenna Built in line polarization antenna, Gain : 12 dbi,Working Temp -20°Cto +80° Complete in all respectApproved Makes: Houston Systems (HOUSYS), First idea Automation (FIA), Magnetic Auto Control |
| 132 | Providing and fixing SITC OF Access Management Controller of below specification:- 2 reader controllerCard holder: 54000 cardsLogs: 60000 recordsAlarm events: 10000 eventsCommunication: TCP/IPVerification: card, card, and timing. Release button, Remote opening from software, timing. Approved Makes: Houston Systems (HOUSYS), First idea Automation (FIA), Magnetic Auto Control |
| 133 | Providing and fixing SITC OF Short Range Reader of below specification:-Voltage: DC 9 - 15 VWorking Current: 100 MaWorking temperature:-10°C to + 60°CHumidity: 20% to 98%Read Distance: 8 – 15 cm Output format: wiegand 26, wiegand 34, RS 232, RS 485 Complete in all respectApproved Makes: Houston Systems (HOUSYS), First idea Automation (FIA), Magnetic Auto Control |
| 134 | Providing and fixing SITC OF VMS System of below specification:- Intel I3, with 3 MB cache, CPU 4460@ 3.2 Ghz, 4 GB RAM, 1 TB HDD 26\" LCD Monitor, Keyboard & Mouse, Winow 10 License enterprise edition,.NET framework 3.5 or above, OS windows 7 64 Bit., Antivirus license Complete in all respectApproved Makes : Lenovo, ACER, HP |
| 135 | Providing and fixing SITC OF Vehicle Management Software below specification:-To monitor filed devices and reporting with registration of data. Password protected user login.Registration of Card, RFID TAGFire integration possibility Camera intrgration PossiblityAuthority based accessAlarm MonitoringEvent and log management Report Management.Manual gate opening and closing. Complete in all respectApproved Makes: Houston Systems (HOUSYS), First idea Automation (FIA), Magnetic Auto Control |
| 136 | Providing and fixing RFID PVC TAG |
| 137 | Providing and fixing 12 mm thick frameless toughened glass glazing in opening of Window and SS railing of approved brand and manufacture, includingfixing with stainless steel railing and necessary SS fittings arrangement and making necessary holes etc. , all complete as per direction of Engineer-in-charge (Stainless steel railing to be paid separately). |
| 138 | Credit for dismantled steel work, M.S. Sheet door with frame etc. which shall be the property of the contractor and should be removed from the site of work as per the directions of the Engineer-in-charge (Nothing extra shall be paid on account of carriage). |
| 139 | Credit for dismantled old bricks i/c necessary carriage etc. all complete as per the directions of the Engineer-in-charge. (Old bricks should be removed from the site of work & nothing extra shall be paid of account of removing mortar from old bricks & cleaning of old bricks). |
| 140 | Dismantling glazed tiles in walls, dado skirting including plaster backing etc. complete & disposal of rubbish to the dumping ground within 50 metres lead as per direction of Engineer-in-charge. |
| 141 | Providing and fixing SCI trap with 100 mm inlet and 100 mm outlet in floor complete, including cost of cutting and making good the walls and floors :Sand cast iron S&S as per IS: 3989 |
| 142 | Providing and fixing under counter washbasin, cutting and making good thewalls wherever required:- (a) White Vitreous China Wash basin size 550x440 mm of Parryware make. |
| 143 | Providing and FixingSITC of 7.5 HP 100X100 MM Openwell submersible pumpset capable of delivering 25.5 LPS at a head of 14 mtrs coupled with 3 Phase 415 v AC electric motor complete as required (Kirloskar/Willo/KSB Make ) |
| 144 | Providing and FixingSITC of 1 HP 50X40 MM Openwell Monosubmersible pumpset capable of delivering 3.90 LPS at a head of 12 mtrs coupled with 3 Phase 415 v AC electric motor complete as required (Kirloskar/Willo/KSB Make ) |
| 145 | Providing and Fixingof 40 mm dia Defuser Jet Nozzles in SS 304 Gr to produce watereffect complete as required. ( The Fountainers /Oase/Premier Make.) |
| 146 | Providing and Fixingof 25 mm dia Vertical Jet Nozzles in SS 304 Gr to produce watereffect complete as required. ( The Fountainers /Oase/Premier Make.) |
| 147 | Providing and Fixingof 25 mm dia Swivel Connector in SS 304 Gr to produce water effect complete as required. ( The Fountainers /Oase/Premier Make.) |
| 148 | Providing and FixingDebris Collection Strainer with SS mesh for filter pump section 1000 x 900 mm complete as required. FNDS-D ( The Fountainers make ) |
| 149 | Providing and Fixing of 65 mm dia SS Over flow Skimmer with nuts bolts,rubber gaskets Complete as required. (Febricated) |
| 150 | Providing and Fixingof 300x300 mm dia SS Main Drain with nuts bolts,rubber gaskets Complete as required. (Febricated) |
| 151 | Providing and Fixing of 100 mm dia GI pipe manifold complete with inlet 100 mm dia connections etc Complete as required (Febricated.) |
| 152 | Providing and Fixing of 650 mm Dia FRP pressure High rate Sand Filter for filteration of suspended material from water body complete with 50 MM dia input and output six position multiport valve for filter,backwash,rinse,waste ,recirculate and close allflow to poolthe filter body manufactures in fibre glass withuV .resistance surface provided with oil pressure guage , pressure 2.5 Kg/sqcm including cost of silica sand for filter with granulometry between 0.4 mm - 0.8 mm complete as required (Pentair/Certikin/Astral/Aquanomics make) |
| 153 | Providing and Fixing of Granular sand Media For Sand Filter . |
| 154 | Providing and Fixing of 50 mm dia ABS Floor Inlers complete with solvent fixing etc Complete as required (Pentair/ Astral/Certikin /Aquanomocs Make) |
| 155 | Providing and Fixing ofClorine Dosing Unit Complete as Reqd. (Pentair/Certikin/Astral/ Aquanomics make) |
| 156 | Providing and Fixing ofFollowing Size uPVC pipe for branching with all accessories like elbows, tees, sockets including cutting, threading, welding complete as required. (Supreme/Finolex/Astral Make) 110 mm Complete as reqd. |
| 157 | Providing and Fixing ofFollowing Size uPVC pipe for branching with all accessories like elbows, tees, sockets including cutting, threading, welding complete as required. (Supreme/Finolex/Astral Make) 63 mm Complete as Reqd. |
| 158 | Providing and Fixing of 25 mm dia OD-25 mm & ID-25 mm nominal Conduit pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (AKG/Setia Make) |
| 159 | Providing and Fixing of 50 mm dia DWC pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (Rex/Supreme Make.) |
| 160 | Providing and Fixing of following size CI Butterfly valve with matching flanges and accessories complete as required. (Sant/DRP/Leader/Kartar Make.) 100 mm Dia Complete as reqd |
| 161 | Providing and Fixing offollowing size GM NRV with matching flanges and accessories complete as required. (Sant/DRP/Leader/Kartar Make.) 100 mm Dia Complete as reqd |
| 162 | Providing and Fixing offollowing size GM NRV with matching flanges and accessories complete as required. (Sant/DRP/Leader/Kartar Make.) 50 mm Dia Complete as reqd |
| 163 | Providing and Fixing of Following SizePvc Ball Valve and accessories complete as required. (Cepex/Harit/Prince Make.) 63 mm Dia Complete as reqd |
| 164 | Providing and Fixing of Following SizePvc Ball Valve and accessories complete as required. (Cepex/Harit/Prince Make.) 50 mm Dia Complete as reqd |
| 165 | Providing and Fixing of Following SizePvc Ball Valve and accessories complete as required. (Cepex/Harit/Prince Make.) 32 mm Dia Complete as reqd |
| 166 | Providing and Fixing ofPVC insulated PVC sheathed copper conductor submersible flat cables complete as required. ( Finolex/Polycab/ KEI Make .) 3 x 6 sqmm Flat Sumbersible |
| 167 | 4 x1.5 sqmm Round |
| 168 | Providing and Fixingwater proof LED 6x3 w RGB LED lights made out of die cast stainless steel suitable 304 gr suitable to be fitted with emitter type power LED\"s with all in one optical lens of 85% effeciency step tempered glass 8 mm with protection class of IP-68 i/c connection & water proof jointing etc Complete as required (6x3 watt model F-26) (The Fountainers/K Lite/Phillips/Premier Make. ) |
| 169 | Providing and Fixing of RGB Linear Light 18 watt per mtrsilicon filled , silicon coatedIP-68 i/c connection excludingwater proof jointing etc Complete as required. (Make The Fountainers Make Model F-20A) |
| 170 | Providing and Fixing straight through water proof joint I/c ferrules and other jointing material for sizeupto 6 sq mm copper conductor submersible cable complete as reqd. (The Fountainers /K Lite/Sun Glow/PhillipsMake.) |
| 171 | Providing and Fixing of SS StandI/c for 6x3 Watt & 3x3 Watt LED Light Complete as required. (Color Design India/Oase/ Water Miracle/The Fountainers/Premier world Make.) |
| 172 | Providing and Fixing of Constant Voltage Driver(CVD) for LED lights 24 Volts complete as required. (Meanwell/Omron/K Light Make. ) |
| 173 | Providing and Fixing of Programmede DMXlighting controllerfor LED lights 24 Volts complete as required. (The Fountainers/K Lite/SunGlow Make.) |
| 174 | Providing and Fixing of adressable unit compatible with DMXlighting controllerfor LED lights 24 Volts complete as required. (The Fountainers/K Lite/SunGlow Make.) |
| 175 | Providing and Fixing Testing and Commissioning of Electrical Control panel for 3 Nos. Pump, & Space for CVD Amplifier with main incomer MCB, voltmeter, VSS, Phase indicating lamps and outgoing with MCB, starter, Time pumping etc, CPRI approved complete as required. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
