Public Works Department-PWD has published Construction Of Auditorium At Government Degree College Khansahib Budgam. Submission Date for this Tender is 27-05-2022. Auditorium Construction Tenders in budgam Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-May-2022 | Corrigendum | Technical Bid | 27-05-2022 |
Sl. No. | Item Description |
1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil |
2 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil : |
3 | Supply and filling of dry stone soling maximum size 100 - 75mm duly hand packed including all carriages, leads and lifts up to site of work complete incl. all carriages |
4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages leads lifts complete |
5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate crushed 40mm nominal size)including all carriages leads lifts complete |
6 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separatelyincl. all carriages |
7 | All work upto plinth Level |
8 | All works above plinth level upto floor V level |
9 | Reinforcement for R.C.C work including straightening,cutting,bending, placing in position and binding all complete Fe-500incl. all carriages |
10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 mincl. all carriages |
11 | GSB/Sand filling inplinth etc in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering complete jobincl. all carriages |
12 | Centring and shuttering incl. strutting, proping etc and removal of form work:- |
13 | Retaining walls,return walls,walls(any thickness) including attached pilasters, buttresses,plinth and string coursesfillets etc. |
14 | Foundations, Footings, bases of columns |
15 | Suspended floors, roofs, landings, balconies and access platform |
16 | Lintels, beams, plinth beam,,girders,bressumers and cantilevers |
17 | Columns, Pillars, Piers, Abutments, Posts and Struts |
18 | Structural steel workwelded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position, and applying a priming coat of approved steel primer incl.carriages upto site all complete |
19 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing completeincl. all carriages |
20 | Brick work with common burnt clay (non modular) bricks claas designation 75 in in superstructure above plinth level upto floor five levelincluding curing in 1:6 cement mortar.including all carriages leads lifts complete |
21 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand) including cost and carriage of all materials involved upto site of work complete. |
22 | 6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) |
23 | 15 mm cement plaster on rough side of brick wall of mix: 1 : 6 ( 1 cement : 6 course sand ) |
24 | 12 mm cement plaster of mix 1: 4 (1 cement: 4 fine sand). |
25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete upto 7"0" height |
26 | 50mm cement cone. Flooring 1:2:4 ( 1 cement 2 coarse sand: 4 hard stone ballast 20 mm & down gauge) finished with a floating coat of neat cement.including all carriages leads lifts complete |
27 | Providing and laying vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600x600mm) |
28 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
29 | Extra for providing edge mouldingto 18mm thick granite stone in steps,counteretc. |
30 | Providing and fixing of stainless steel railing of 304 Grade of height upto 36” to stairs, landings etc including vertical and horizontal members and hand rails of 50mm dia as per approved Pattern including cutting of granite/floors and fastening with led grouting. |
31 | Providing and fixing first class kailwood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position. |
32 | Providing & fixing 35mm thk ISI marked Flush door shutters non decorative type solid core of block board construction with frame of first class hard wood all around, 20mm thick & well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces including bright finished ISI marked butt hinges with necessary screws. |
33 | Providing and fixing 40x5mm flat iron hold fasts 40cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete blocks 30 x10 x 15 cm in 1:3:6 mix with 20mm nominal size stone aggregate. |
34 | Providing and Fixing, uPVC factory made, white colour casement/sliding windowmade of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile (reinforcement) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per dwarings & direction of Engineer-in-charge. Including Glazing, hardware hinges and fitting etc. complete.Sliding Windowhaving one sides fixed and one part sliding with fixed SS mosquito mesh including 5mm thick glass, all hardware fittings & locking arrangement. 1-track outer frame 77mmx62mm, sash 68x6242mm, glazing bead 17.5x20mm, T transom million 80x42mm having wall thickness 2.5mm ± 0.2mm.( Face measurements to be measured. ) |
35 | Supply & Fixing of Hardware Fittings For Doors & Windows |
36 | Providing and fixing aluminium handle lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc. 150mm |
37 | P&F approved quality Aluminium tower bolt 300x10mm |
38 | P&F approved quality Aluminum hanging door stoppers 125mm |
39 | P&F approved quality bright finished brass 100mm mortise latch and lock |
40 | Providing & fixing high rib profiled sheeting 1000 mm minimum cover width with minimum 28-32 mm crests, manufactured out of 0.50 mm TCT (Total Coated Thickness) Hi-Tensile SMP Galvalume steel. The sheets shall have wide pans with 2 to 3 nos. stiffening ribs, effective water shedding and special male/female ends with return legs on side laps for purlins support and anti-capillary flute in side, lap. The sheets shall have a hot-dip metallic coating of Zinc and Aluminium (150 gms/sqm zinc/alum.coating mass total on both sides, AZ-150 as per AS1397), 550 Mpa yield stress, providing silicon modified polyester coating of approved colour of total thickness of 35 microns comprising of 20 microns exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces including, ridigs/ Hips / Valley/ laps and using 12 mm polymer coated hot dip galvanised hex self drilling fasteners on each crest of sheets for connection with purlins. |
41 | Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building.With resin bonded fiber glass wool with density 24 kg/cum |
42 | Providing and fixing Anti skid tiles on Ramp over 20mm avg.thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the tile with base of 1:4 (1 cement : 4 coarse sand) including cost of cement and curing |
43 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. On plastered surface. |
44 | Providing and applying plaster of paris of2 mm thickness over plastered surface to prepare the surface even andsmooth complete. |
45 | Providing & making of 75x75/2 mm POP Ornamental corner cornice including cost of all material and labour. |
46 | Distempering with 1st quality acrylic distemper (ready made) of approved manufacturers and of required shade and color complete. Two or more coats on new work including priming coat over POP surface. |
47 | Preparingwooden basedsurfaces by knifing grey paste filler of approved brand & manufacture. |
48 | Applying priming coat on new wood and wood based surface with ready mixed wood primer |
49 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces |
50 | Providing and fixing Aluminium Composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet Textured (Wood colour). The sheet shall be bent to shaped profiles as required including Perimeter Extrusion base frame extruded stifferners 2.5 to 3mm, SS expansion fasteners and silicone sealant (Dow Corning 789), all back up arrangements required for installation as per approved Architectural Elevation drawings, complete in all respects at all heights incl scoffolding complete (Sheet of Alucobond / Reynobond / Alpolic / Gurind or equivalent make). |
51 | Providing and fixing 12 mm ply for rough ceiling/ walls over wooden frame work in hard wood using 50mmx75mm section in grid horizontall and vertically @ 600 x1200 mm c/c spacing including necessary supporting members to take the load of rough ceiling and services including nesessary staging/ scouffolding height upto 10.0 mtr etc complete item |
52 | Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity<0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to centerin a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge lightweight calcium silicate panels/ tiles |
53 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2 , bending strength 100 kg/cm2 , of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing. |
54 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately: Chaar Phool |
55 | Providing and fixingAC 4 grade wooden laminated flooring including providing of 2mm thick foam, end prifile,skirting and all required accessories complete in every respect |
56 | Providing and fixing budloo wood paneling made out of 4”x3/4” pieceplaned on one side including polishing complete |
57 | Dry random rubble masonry with hard stone using quarry stones in soakage pits incl. cost of bond stones & all carraiges upto site of work comp. |
58 | Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.oom spacing. This includes cost of cutting chases and making good the same incltesting of joints complete as per direction of Engineer-in Incharge. (Concealed work incl cutting chases and making good the walls etc) |
59 | PN -16 pipes, 20 mm OD |
60 | PN -16 pipes, 25 mm OD |
61 | Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.oom spacing. This includes cost of cutting chases and making good the same incltesting of joints complete as per direction of Engineer-in Incharge. (Internal work exposed on wall )PN -16 pipes, 32 mm OD |
62 | Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C trenching, refilling and testing of joints complete as per direction of Engineer-in Incharge. External work including trenching, refilling etc. PN -16 pipes, 40 mm OD |
63 | Providing and fixing P.V.C Soil, waste, Rain water Pipes,vent pipes medium classISI mark includingall fittingswith or without access of any degree i.ebends, junctions, cowls, offsets, access pieces, holder bats and structure steel fabricated supports, clamps for suspended pipes in ceiling, stays, through ducts, etc andjointing with solvent/seal joints including cutting holes in walls and floors.100 mm dia |
64 | Providing and fixing P.V.C Soil, waste, Rain waterpipes medium classISI mark includingall fittingswith or without access of any degree i.ebends, junctions, access pieces, andjointing with solvent/seal joints including cutting holes in walls and floors and excavation, refilling and disposal of surplus earth wherever required and making good the same complete, as directed by the Engineer-in-charge. 100 mm dia pipe |
65 | Providing & fixing 40mm dia P.V.C. pipe medium classISI markcomplete withfittings, clamps including cutting and making good the walls and ceiling for waste pipes, bath wastes, overflow, kitchen equipment waste connections and condensate drainage, as directed by the engineer-in-charge. |
66 | Providing and fixing PP-R ball valveof full flow with of superior quality. |
67 | 40mm dia |
68 | 32mm dia |
69 | 25mm dia |
70 | Providing & laying allround cement concrete 1:2:4 mix (1 cement : 2 coarse sand:4 stone aggregate 20mm and down gauge) 75mm in bed and pipe. For 100mmand 150mm dia pipes under floor including centering & shuttering whereverrequired. |
71 | Providing and fixing P.V.C floor trap 100mm diaincluding cost of cutting and making good the walls and floors wherever required. |
72 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm P.V.C or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
73 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
74 | Providing & Fixing first quality white vitreous china flat back wash basin size 550 x 400 mm with C.I/M.S brackets painted with two or three coats of enamel paint of approved shade over a coat of primer, C.P.brass waste and coupling,chain and rubber plug,P.V.C Flexiblewaste pipe complete including cuttingand making good the walls wherever required.Flat back wash basin size 550 x 400 mm |
75 | Providing and fixing white viterious chaina float back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size repectively with automatic fliushing cistern with standard flush pipe and CP brass speader with barass unions and GI clamps complete, including painting of fittings and brackets cutting andmaking good the walls and floors wherever required. One urinal basin with 5 Liter white PVC automatic flushing cistern |
76 | Providing and fixing vitrous china pedsetal for wash basin completely recessed at the back for the reception of pipes and fittings |
77 | Providing & Fixing 15 mm dia C.P brass angle valve withC.P brass wall flange of approved make complete including cutting and making good the walls wherever required. |
78 | Providing & Fixing 600x20 mmC.Pbrasstowel railof approved make with C.P brackets fixed to wooden cleats with C.P brass screws etc. including cutting and making good the walls wherever required . |
79 | Providing and fixing C.P. brass Soap Dish/ tray of approved make including screws complete |
80 | Providing & fixing SS coathooks strip (plate type 6 hook 300-400mm length) fixedwith PVC rawal plug and C.P brass screws including cutting and making good the walls wherever required. |
81 | Providing & Fixing C.P. brass Single hole Mixer of approved make forwash basin of approved make including cutting and making good the walls wherever required. |
82 | Providing & Fixing C.P. brassnon- telephonicwall Mixer of approvedmake including cutting and making good the walls wherever required. |
83 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 610x510mm bowl depth 200mm |
84 | Providing & Fixing C.P. brass towel ring fixedto PVC rawal plugwithC.P. brass screws. Heavy type |
85 | Providing & Fixing of health faucet with shower and flexible connection 1.20mtr long of approved brandcomplete. |
86 | Providing & fixing C.P. brass sink mixer with of approved make swinging casted spout wall mounted complete including cutting and making good the walls wherever required. |
87 | Providing & fixingof 600x120x5 mmglass shelf with edges round of supported on anodiseed aluminum angle frame with C.P. brass and brackets and guard rail complete withfixed with 40 mm long screws , rawl plugs, etc complete. |
88 | Providing & fixingof 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete fixed to PVC rawal plug with C.P. brass screws and washers complete. |
89 | Providing & fixingof 15mm dia PVC connection 600mm long including end union and washers complete. |
90 | Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners Venus, Recold, Jacquar, Crompton 50 liter |
91 | Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects.100mm dia |
92 | Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand),200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarsesand), finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), neatly finished complete as per standard design including excavation, refilling and disposal of surplus earth. |
93 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line |
94 | Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets |
95 | Providing and fixing SRFC Manhole covers 600mm diaheavy duty |
96 | Providing & Fixing C.P. brass tape long bodyof approvedmake including cutting and making good the walls wherever required. |
97 | Providing Over head PVC Storage tank triple layer ISI mark of approved make including allied tank fittings such as tank nipples etc making of necessary connections complete. |
98 | Supplying, Installation, testing and commissioning of Submergable water pump 2HPincluding Panel andall fittings and fixtures complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail