}

Construction Of Parking Shed 2 Nos Vehicle Along With Seating Arrangement 20 People And One Toilet Adjacently On The Opposite Of The Residence Of Honble Chief Justice High Court Of Tripura At New Capital Complex Agartala. Construction Of Parking Shed 2 No, agartala-Tripura

Agartala Municipality Corporation has published Construction Of Parking Shed 2 Nos Vehicle Along With Seating Arrangement 20 People And One Toilet Adjacently On The Opposite Of The Residence Of Honble Chief Justice High Court Of Tripura At New Capital Complex Agartala. Construction Of Parking Shed 2 No. Submission Date for this Tender is 24-05-2022. Shed Construction Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

32192992
Construction Of Parking Shed 2 Nos Vehicle Along With Seating Arrangement 20 People And One Toilet Adjacently On The Opposite Of The Residence Of Honble Chief Justice High Court Of Tripura At New Capital Complex Agartala. Construction Of Parking Shed 2 No
Open Tender
Indian
Tripura
agartala
24-05-2022

Tender Details

Construction Of Parking Shed 2 Nos Vehicle Along With Seating Arrangement 20 People And One Toilet Adjacently On The Opposite Of The Residence Of Honble Chief Justice High Court Of Tripura At New Capital Complex Agartala. Construction Of Parking Shed 2 Nos Vehicle Along With Seating Arrangement 20 People And One Toilet Adjacently On The Opposite Of The Residence Of Honble Chief Justice High Court Of Tripura At New Capital Complex Agartala.

Key Value

Document Fees
INR 1000 /-
EMD
INR 13292.0 /-
Tender Value
INR 13.29 Lakhs /-

BOQ Items

Name of Work: Construction of parking shed (2 nos Vehicle) along with seating arrangement (20 people) and one toilet adjacently on the opposite of the residence of Hon"ble Chief Justice, High Court of Tripura at New Capital Complex, Agartala.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kind of soil.
22.13 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil.
32.16 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
4Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
5Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete
6Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 4.1.5 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
7Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 4.1.5 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size)
8Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns
9Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level: 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
10Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
11Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 ° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement 5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
12Centering shuttering including struttings, propping etc. and removal of form work for: (a) Foundations, footings, bases for columns etc. for mass concrete with timber plank.
13Centering shuttering including struttings, propping etc. and removal of form work for: (b) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply.
14Centering shuttering including struttings, propping etc. and removal of form work for: © Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank.
15Centering shuttering including struttings, propping etc. and removal of form work for: (d) 5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
16Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
17First class brick work in foundation and plinth including cost of all materials as required complete. IN cement mortar 1:6 (1 cement : 6 fine sand).
18Half brick masonry work with first class brick in superstructure upto floor five level including cost of all materials as required complete. In cement mortar 1:4 (1 cement : 4 fine sand).
19Providing and fixing M.S. grills of required patternin frames of windows etc. with M.S. flats, square or round bars etc. all complete. (a) Fixed to openings /wooden frames with rawl plugs screws etc
20Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 × 19 mm and 1 mm +/- 0.1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer In Charge. Extruded section profile size 48x40 mm.
21Providing and fixing to existing door frames. 8.115.1 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised /plastic brackets of size 75×220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserying galvanised MS tube of size 20×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC hollow section of size 100×24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic /galvanised MS "U" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontaly 6 mm galvanised MS rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter)
22Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required
23Providing and fixing MS bolts including nuts and washers complete as per standard design: upto 450 mm length.
24Cement concrete flooring 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
25Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. 10.25.2 Dark shade pigment using ordinary cement
26Providing and fixing rectified glazed wall tiles 300 x 450 mm or more conforming to IS : 15622 - 2017 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
27Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc. complete. Anti-Skid Tiles. 10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades and designs
2880 mm thick factory made CC interlocking paver block of M-30 Grade providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including 50 mm thick compacted bed of sand filling the joints with fine sand etc all complete as per specification and approval / direction of Engineer In Charge.
2911.15 Supply & installation of pre-painted Galvalume sheets forroofing/ cladding (size,shape andpitch of corrugationas approved by Engineer-in-charge) in 550mpasteelgrade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Aland 1.5%Siliconconfirming to ASTM A792/ A792Mand AS1397, Alloy coating AZ150/ AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25micronsminimumto avoid scratcheswhile transportation and shouldbe supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thickness.
30Supply & installation roofing accessories in of pre-painted Galvalume sheets 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/ A792M and AS1397, Alloy coating AZ150/ AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protectiveguardfilmof 25 micronsminimumto avoid scratches whiletransportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches whiletransportation. The sheet shall be fixed using self drilling / self tapping screws withEPDMwasherscomplete withEPDMwasherscomplete for Ridges/ Valley/ Gutter/ Flashing of width 610mm: 0.50 mm thickness.
3112 mm cement plaster of mix. In cement mortar 1:4 (1 cement : 4 fine sand).
3215 mm cement plaster of mix. In cement mortar 1:4 (1 cement : 4 fine sand).
33Net cement punning.
34Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: 12.48.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture
35Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
36Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
37Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc complete as per direction of the Engineer In Charge.
38Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and uptoa lead of 50 m etc complete as per direction of the Engineer In Charge. In cement mortar.
39Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineer­in­charge. (Glazing and paneling and dash fasteners to be paid for separately) (A) 16.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
40Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm)
41Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.
42Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good thewalls wherever require : 18.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps
4318.4 Providingand Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and340x410x265mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
44Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357mm.
4518.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
4618.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 18.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms
4718.82 Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (a) 18.82.1 Single socketed pipe - 75 mm OD.
4818.82 Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (b) 18.82.1 Single socketed pipe - 110 mm OD.
49Providing and fixing on wall face moulded fittings/ accessories for PVC rain water, soil, waste & unplasticised unplasticised vent pipes - PVC Rigid pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (a) Coupler (i) 75 mm.
50Providing and fixing on wall face moulded fittings/ accessories for PVC rain water, soil, waste & unplasticised unplasticised vent pipes - PVC Rigid pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (a) Coupler (i) 110 mm.
51Providing and fixing on wall face moulded fittings/ accessories for PVC rain water, soil, waste & unplasticised unplasticised vent pipes - PVC Rigid pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (b) Bend 87.5 (i) 75 mm.
52Providing and fixing on wall face moulded fittings/ accessories for PVC rain water, soil, waste & unplasticised unplasticised vent pipes - PVC Rigid pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (b) Bend 87.5 (i) 110 mm.
53Providing and fixing on wall face moulded fittings/ accessories for PVC rain water, soil, waste & unplasticised unplasticised vent pipes - PVC Rigid pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (c) Duble equal junction of required degree with door (i) 75x75x75x75 mm
54Providing and fixing on wall face moulded fittings/ accessories for PVC rain water, soil, waste & unplasticised unplasticised vent pipes - PVC Rigid pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (c) Duble equal junction of required degree with door (ii) 110x110x110 mm
55Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. 75mm
5619.7 ProvidingandfixingChlorinatedPolyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (a) 25 mm nominal outer dia .Pipes.
5719.8 ProvidingandfixingChlorinatedPolyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/ c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes.
5819.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
5919.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal outer dia pipes.
6019.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail