|
| 1 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50M lead. |
| 2 | Earth work in excavation in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge. |
| 3 | Sand filling in foundation and plinth including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. |
| 4 | Providing & laying plain cement concrete(1:3:6) using 4cm size metal etc. complete including all labour, materials & royality…….etc. complete as per direction of EIC. |
| 5 | Cement concrete (1:2:4) with 12 mm size hard crusher broken granite chips. |
| 6 | Providing lifting, hoisting and laying R.C.C. of M-20 Grade to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. (Ground Floor)Column base footing |
| 7 | Column in S/S |
| 8 | Plinth beam |
| 9 | Lintel band |
| 10 | Chajja( at lintel level & window sill level ) |
| 11 | Roof Beam |
| 12 | Roof slab |
| 13 | Roof Slab Fins |
| 14 | Supplying,Cutting ,straightening of steel HYSD (Fe- 500) conforming to (IS- 1786) withbending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in positionas required for the Rod work in all floors and & for providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of allmaterials and binding wires of 18 to 20 gauge & cost of all labourT&P required for the work etc. Complete in all respect as per the direction of Engineer in charges ( payment will be made on weight of MS rod or tor steel only basing on the co- efficient of MS rod or tor steel bars approvedby SAIL/ TATA/competent authority and (Noseparate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, ,chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.) |
| 15 | Fly ash brick masonaryof size 23cmx11cmx8cm in cm (1:6) in foundation & plinthincluding cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. |
| 16 | Fly ash brick masonaryof size 23cmx11cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:6) in Super structure including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. |
| 17 | Fly ash brick masonaryof size 23cmx11cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:4) in Super structure including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. |
| 18 | Supplying of M.S. Grill made out of structural steel, flats, plates, bars confirming to IS for windows, ventilators etc. as per drawing and design, fixed to walls with clamps including priming 1 coat with all kdamages in walls and floors etc. including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc.as per the direction of the Engineer in Charge. |
| 19 | Fixing charges of MS doors and windows of iron works…… etc complete. |
| 20 | Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge. |
| 21 | Providing 6 mm thick cement plaster in cm(1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tols and plants etc. complete as per the driection of the Engineer-in-Charge. |
| 22 | Providing 12mm thick cement plaster in cm(1:6) on the rough surface/ plumbed surface of masonry racking out ofjoints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the direction of the Engineer-in-Charge. |
| 23 | Providing 16mm thick cement plaster in cm (1:6) on the rough surface of masonry walls for all floors including racking and joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. |
| 24 | Supplying & fixing ofindustrial vitrified tiles on 20 mm thick bed of cement mortar 1:4 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc complete. |
| 25 | Supplying, fitting and fixing vitrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge.(For new work only) |
| 26 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc. complete. |
| 27 | Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 28 | Distempring two coat to wall with distemper over a coat of wall primer of any approved shade including cost of all charges etc. |
| 29 | Finishing wall surface with two coats of weather coat over a coat of cement primingincluding cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction ofEngineer charges. |
| 30 | Painting two coats of synthetic enamel paintover a coat of primerincluding cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction ofEngineer charges. |
| 31 | Providing 2.5cm thick Grading Concrete in C.C (1:2:2) with 4.7 mm size CBHG Chips on new roof slab including cost of materials , labour, T&P all comp. |
| 32 | Back Filling with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 33 | Weather coat painting two coats with 100% Acrylic emulsion paint (1st. quality) exterior grade over a coat of water bond cement primerof approved make & shade manufactured by reputed manufacturer like (NEROLAC/ASIAN/BERGER/DULOX) or equivalent to make an ever finished surface in all floor and height with all scaffolding and staging charges including cost, conveyance & taxes of all materials labour & T&P etc. complete as directed by the Engineer-in-charge. |
| 34 | Supplyuing ,Fitting and fixing of Stainless steel letters size up to 0-12 including cost of all materials, labour, T&P etc. Complete as per direction of the Engineer-in-charge. |
| 35 | Recessed wiring to light/ fan/ exhaust fan/ call bell point with 1.5 sqmm FR PVC pipe insulated single core multistrand cupper conductor of ISI marked with 20mm dia non- metallic PVC flexable conduit with 5 AMP. 250 V piano type switch ISI arked and ceiling rose ISI marked on MS box having front Bakelite cover of suitable size, Ms box with 1.5 sqmm FR PVC insulated single core multistrand copper conducter as earth wire including all accessories and connection as per direction of Engineer incharge. (make of wire Finolex / L&T/ Ancor/ Havels/ V= guard) a) Group- A |
| 36 | b) Group- B |
| 37 | c) Group- C |
| 38 | Recesssed wiring to 3 pin 5amp plug point with 1.5sqmm FR PVC insulated single core multistrand cupper condutor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5amp 250V piono typeswitch ISI marked |
| 39 | S/F of 5/6 a switch and 3 pin 5/6 a socket on existing board |
| 40 | Cirecuit submain wiring in PVC conduit 2x1.5 sqmm+1x1.5 sqmm |
| 41 | 2x2.5 sqmm+ 1x1.5 sqmm |
| 42 | 2x4 sqmm+ 1x1.5 sqmm |
| 43 | S/F of B.K angel holder without bulb |
| 44 | S/F of 20 Watt LED box type fitting |
| 45 | S/f of 9 watt LED Lamp (C&S/Havells/Phillips) |
| 46 | S/f of 45 Watt LED Street Light Fitting (Bajaj/ Havells/ CG) |
| 47 | S/f of 48\" AC Cilling fan w/o regulator (Bajaj/ Usha/ CG) |
| 48 | S/f of electronic fan regulator step type |
| 49 | S/f of 12\" exhust fan heavy duty (Usha/ Almonard) |
| 50 | Fixing charges of exhust fan |
| 51 | S/f of 32A ICDP Main Switch with MS Board |
| 52 | S/f of 2x6 sq mm PVC Aluminium Service wire with GI connection |
| 53 | s/f of 16inch wall mounted cfan (havells/Usha/crompton) |
| 54 | S/ of 2 way MCB Box with 2 nos SP MCB (Legrand) |
| 55 | Supplying and fixing of earthing with GI eartth pipe 3m long 40mm dia ISI marked including accessories and providing with pipe and charcoal |
| 56 | s/f of ceiling light 15 watt round type |
| 57 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.25mm dia PVC ASTM pipe (sch-80) Ground floor |
| 58 | 32mm dia PVC ASTM pipe (sch-80) roof of 1st floor |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia PVC ASTM pipe (sch-80)Ground floor |
| 60 | 25mm diaC-PVC Pipes (sch-80)Ground floor |
| 61 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (jaquar Make) |
| 62 | 15mm dia CP long body bib cock (jaquar Make) |
| 63 | 15mm dia CPtwo way bib cock (jaquar Make) |
| 64 | 25mm dia brassfull way valve (Shakti make) |
| 65 | 32mm dia brassfull way valve (Shakti make) |
| 66 | Heallth Faucet |
| 67 | 15mm CP Extension piece |
| 68 | 125mm CP grating |
| 69 | 15mm size C.P. flange |
| 70 | 20mm dia CP concealed stop cock (jaquar Make) |
| 71 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge1000 liters capacityPVC water storage tank top of Ground floor |
| 72 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.Ground floor |
| 73 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-chargeGround floor |
| 74 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground floor |
| 75 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 76 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 78 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 79 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 80 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 81 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 82 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 83 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 84 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with \"s\" trap plain(Hindware/Parryware/Neycer make) |
| 85 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with PEDESTRAL |
| 86 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail (Jaquar make) |
| 87 | Towel ring (Jaquar make) |
| 88 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf (Jaquar make) |
| 89 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.Design Large Mirror |
| 90 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder(Jaquar make) |
| 91 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower |
| 92 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 93 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 94 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.(8.13x ..15) |
| 95 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeground floor (8.13x .2) |
| 96 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )Ceramic tile 30cmx30cmground floor (3 x 1.75) |
| 97 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.ground floortoilet-(3+1.75) x 2 x 2.15 |
| 98 | Glazed tile 40cmx25cm ground floor toilet-(3+1.75) x 2 x 2.15 |
| 99 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 (1.62 x 2) |
| 100 | Ext. S/D PortionSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge150mm dia P.V.C. pipe |
| 101 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 102 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
