U N Mehta Institute Of Cardiology & Research Center-UNMICRC has published E-Tender For Rate Contract For Supply Of Quality Controls ( Internal & External ) , Chemicals And Consumables For Laboratory Services For U N Mehta Institute Of Cardiology And Research Centre ( Affiliated To B. J. Medical College & Nabh Accredited ) A. Submission Date for this Tender is 30-05-2022. Chemical Supply Tenders in Asarwa Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Title | Levels to be Provided |
| 1 | albumin | Any levels |
| 2 | alkaline phos | Any levels |
| 3 | sgpt | Any levels |
| 4 | amylase | Any levels |
| 5 | sgot | Any levels |
| 6 | bili total | Any levels |
| 7 | bili direct | Any levels |
| 8 | calcium | Any levels |
| 9 | chloride | Any levels |
| 10 | cholesterol | Any levels |
| 11 | ck total | Any levels |
| 12 | creatinine | Any levels |
| 13 | glucose | Any levels |
| 14 | iron | Any levels |
| 15 | LDH | Any levels |
| 16 | LIPASE | Any levels |
| 17 | MAGNESIUM | Any levels |
| 18 | PHOSPHORUS | Any levels |
| 19 | POTASSIUM | Any levels |
| 20 | SODIUM | Any levels |
| 21 | TOTAL PROTEIN | Any levels |
| 22 | TRIGLYCERIDE | Any levels |
| 23 | UIBC | Any levels |
| 24 | HDL | Any levels |
| 25 | UREA | Any levels |
| 26 | URIC ACID | Any levels |
| 27 | LIPOPROTEIN A | Any levels |
| 28 | DIGOXIN | Any levels |
| 29 | APO A1 | Any levels |
| 30 | APO B | Any levels |
| 31 | cpk mb | Any levels |
| 32 | HSCRP | Any levels |
| 33 | BNP | Any levels |
| 34 | HOMOCYSTEINE | Any levels |
| 35 | HIGH SENSITIVE TROPONIN I | Any levels |
| 36 | URINE R/M | Any levels |
| 37 | d dimer | Any levels |
| 38 | PT | Any levels |
| 39 | APTT | Any levels |
| 40 | HBA1C | Any levels |
| 41 | CBC | Any levels |
| 42 | FREE PSA | Any levels |
| 43 | TOTAL PSA | Any levels |
| 44 | FERRITIN | Any levels |
| 45 | FREE T3 | Any levels |
| 46 | FREE T4 | Any levels |
| 47 | T3 | Any levels |
| 48 | T4 | Any levels |
| 49 | TSH | Any levels |
| 50 | VITAMIN B12 | Any levels |
| 51 | 25(OH) VITAMIN D | Any levels |
| 52 | PROCALCITONIN | Any levels |
| 53 | HBSAG | Any levels |
| 54 | HIV | Any levels |
| 55 | CRP QUANTITATION | Any levels |
| 56 | ammonia | Any levels |
| 57 | DIRECT LDL | Any levels |
| 58 | MYOGLOBIN | Any levels |
| 59 | CYSTATINE C | Any levels |
| 60 | FRUCTOSAMINE | Any levels |
| 61 | GGT | Any levels |
| 62 | LACTIC ACID | Any levels |
| 63 | CSF PROTEIN | Any levels |
| 64 | URINE PROTEIN | Any levels |
| 65 | ALFA ANTITRYPSIN | Any levels |
| 66 | ALPHA 1 GLYCOPROTEIN | Any levels |
| 67 | ASO | Any levels |
| 68 | B2-MICROGLOBULIN | Any levels |
| 69 | CERULOPLASMIN | Any levels |
| 70 | C3 | Any levels |
| 71 | C4 | Any levels |
| 72 | HEPTOGLOBIN | Any levels |
| 73 | IGA | Any levels |
| 74 | IGG | Any levels |
| 75 | IGM | Any levels |
| 76 | IGE | Any levels |
| 77 | KAPPA LIGHT CHAIN | Any levels |
| 78 | LAMDA LIGHT CHAIN | Any levels |
| 79 | MICROALBUMIN | Any levels |
| 80 | PRE ALBUMIN | Any levels |
| 81 | RHEMATOID FACTOR | Any levels |
| 82 | TRANSFERRIN | Any levels |
| 83 | AMIKACIN | Any levels |
| 84 | CARBAMAZEPINE | Any levels |
| 85 | DIGITOXIN | Any levels |
| 86 | GENTAMYCIN | Any levels |
| 87 | LITHIUM | Any levels |
| 88 | PHENOBARBITAL | Any levels |
| 89 | PHENYTOIN | Any levels |
| 90 | THEOPHYLLINE | Any levels |
| 91 | TOBRAMYCIN | Any levels |
| 92 | VANCOMYCIN | Any levels |
| 93 | VALPROIC ACID | Any levels |
| 94 | ALFA FETO PROTEIN | Any levels |
| 95 | CA 125 | Any levels |
| 96 | CA 15.3 | Any levels |
| 97 | CA 19.9 | Any levels |
| 98 | CA 72.4 | Any levels |
| 99 | CEA | Any levels |
| 100 | CYFRA 21.1 | Any levels |
| 101 | HE4 | Any levels |
| 102 | NSE | Any levels |
| 103 | PVKA-II | Any levels |
| 104 | PROGRP | Any levels |
| 105 | ROMA | Any levels |
| 106 | SCC | Any levels |
| 107 | GELECTIN 3 | Any levels |
| 108 | NT PROBNP | Any levels |
| 109 | BETA HCG | Any levels |
| 110 | DHEA-S | Any levels |
| 111 | ESTRADIOL | Any levels |
| 112 | FSH | Any levels |
| 113 | LH | Any levels |
| 114 | PROGESTERONE | Any levels |
| 115 | PROLACTIN | Any levels |
| 116 | SHBG | Any levels |
| 117 | TESTOSTERONE | Any levels |
| 118 | CMVIGG | Any levels |
| 119 | CMV IGM | Any levels |
| 120 | RUBELLA IGG | Any levels |
| 121 | RUBELLA IGM | Any levels |
| 122 | TOXO IGG | Any levels |
| 123 | TOXO IGM | Any levels |
| 124 | ANTI HBc IGM | Any levels |
| 125 | ANTI Hbe | Any levels |
| 126 | ANTI HCV | Any levels |
| 127 | ANTI HBS | Any levels |
| 128 | HAV Ab IGG | Any levels |
| 129 | HAV Ab IGM | Any levels |
| 130 | HBeAG | Any levels |
| 131 | HCV Ag | Any levels |
| 132 | r HTLV I/II | Any levels |
| 133 | ANTI CCP | Any levels |
| 134 | C PEPTIDE | Any levels |
| 135 | CORTISOL | Any levels |
| 136 | INSULIN | Any levels |
| 137 | FOLATE | Any levels |
| 138 | FOLATE RBC | Any levels |
| 139 | PTH | Any levels |
| 140 | PEPSINOGEN I | Any levels |
| 141 | PEPSINOGEN II | Any levels |
| 142 | CHAGAS | Any levels |
| 143 | EBV EBNA -I IGG | Any levels |
| 144 | EBV VCA IGG | Any levels |
| 145 | EBV VCA IGM | Any levels |
| 146 | SARS-COV IGG AGAINST SPIKE PROTEIN | Any levels |
| 147 | SARS-COV IGM AGAINST SPIKE PROTEIN | Any levels |
| 148 | SYPHILIS | Any levels |
| 149 | URINE NGAL | Any levels |
| 150 | METHOTREXATE | Any levels |
| 151 | ANTI TG | Any levels |
| 152 | ANTI TPO | Any levels |
| 153 | THYROGLOBULIN | Any levels |
| 154 | TRAb | Any levels |
| 155 | T-uptake | Any levels |
| 156 | CYCLOSPORIN | Any levels |
| 157 | SIROLIMUS | Any levels |
| 158 | TACROLIMUS | Any levels |
| 159 | BENZO DIAZEPINE | Any levels |
| 160 | ACETAAMINOPHEN | Any levels |
| 161 | TRICYCLIC ANTIDEPRESSANT | Any levels |
| 162 | BARBITURATES | Any levels |
| 163 | CANNABINOIDS | Any levels |
| 164 | COCCAINE | Any levels |
| 165 | ECSTASY | Any levels |
| 166 | ETHANOL | Any levels |
| 167 | METHADONE | Any levels |
| 168 | OPIATES | Any levels |
| 169 | PHENACYCLIDINE | Any levels |
| 170 | PROPOXYPHENE | Any levels |
| 171 | SALICYLATE | Any levels |
| 172 | INHIBIN B | Any levels |
| 173 | H.PYLORI | Any levels |
| 174 | IL-6 | Any levels |
| 175 | ANGIOTENSIN CONVERTING ENZYME | Any levels |
| 176 | GROWTH HORMONE | Any levels |
| 177 | HERPES IGG | Any levels |
| 178 | HERPES IGM | Any levels |
| 179 | SARS COV-2 TOTAL ANTIBODY | Any levels |
| 180 | ACTH | Any levels |
| 181 | AMH | Any levels |
| 182 | ADA | Any levels |
| 183 | COPPER | Any levels |
| 184 | ZINC | Any levels |
| 185 | G-6 PD ENZYME | Any levels |
| 186 | CHOLINEESTERASE | Any levels |
| 187 | ERYTHROPOETIN | Any levels |
| 188 | INTRINSIC FACTOR ANTIBODY | Any levels |
| 189 | HIGH SENSITIVE TROPONIN T | Any levels |
| 190 | SARS-COV-2 ANTIBODY AGAINST NUCLEOCAPSD | Any levels |
| 191 | Cardiac external quality control Program | 1 Vial for 1 Month |
| 192 | Routine Biochemestry external quality control program | 1 Vial for 1 Month |
| 193 | Immuno assay external quality control program | 1 Vial for 1 Month |
| 194 | Serum proteins external quality control program | 1 Vial for 1 Month |
| 195 | Urine analysis external quality control program | 1 Vial for 1 Month |
| 196 | coagulation external quality control program | 1 Vial for 1 Month |
| 197 | Hematology external quality control program | 1 Vial for 1 Month |
| 198 | Therapeutic drug monitoring external quality control program | 1 Vial for 1 Month |
| 199 | HIV- Hepatitis External Quality Control Program | 1 Vial for 1 Month |
| 200 | HbA1C/Haemoglobin External Quality Control Program: | 1 Vial for 1 Month |
| 201 | LUGOLS IODINE | 100 ML |
| 202 | 30% SULPHOSALICYLIC SOLUTION ANALYTICAL GRADE | 500 ML |
| 203 | C.S.F.DILUTING FLUID | 100 ML |
| 204 | TUBERCULIN P.P.D. | (10 TU/ 0.1ML) 5ML VIAL |
| 205 | LEISHMAN STAIN SOLU (CYTOCHROMIC) READY TO USE | BUFFER BSC CERTIFICATE 500 ML |
| 206 | WBC DILUTING FLUID | 500 ML |
| 207 | FOUCHESTS REAGENT | 500 ML |
| 208 | BENEDICTS QUALITATIVE SOLUTION | 1000 ML |
| 209 | AEC DILUTING FLUIDS | 100 ML |
| 210 | 3.8% SODIUM CITRATE SOLUTION | 500 ML |
| 211 | D.P.X.MOUNT (CLEANAR) | 250 ML |
| 212 | ETHANOL ABSOLUTE | 500 ML |
| 213 | INDIAN INK | 100 ML |
| 214 | METHYLENE BLUE POWDER | 25 GM |
| 215 | METHANOL | 2500 ML |
| 216 | ACETIC ACID (GLACIAL) | 500 ML |
| 217 | TUBERCULIN P.P.D. | 5TU/0.1ML 5ML VIAL |
| 218 | TUBERCULIN P.P.D. | (1TU/0.1ML) 5ML VIAL |
| 219 | SODIUM HYPOCHLORITE LR | 500 ML |
| 220 | BARIUM CHLORIDE POWDER LR | 500 GM |
| 221 | BARIUM CHLORIDE SOLUTION | 500 ML |
| 222 | ISOPROPANOL "SQ" | 2500 ML |
| 223 | AMMONIUM SULPHATE ANALYTICAL GRADE | 500GM |
| 224 | HYDROGEN PEROXIDE 30% W/V LR | 500 ML |
| 225 | NEW METHYLENE BLUE | 25 GM |
| 226 | MULTISTIX | BOTTLE OF 100 STRIP |
| 227 | KETODIASTIX STRIP FOR DETECT OF SUGAR, ACETONE IN URINE | BOTLE 50 STRIP |
| 228 | HAEM TEST | (OCULT BLOOD TEST) |
| 229 | URISTIX STRIPS | BOTTLE OF 100 STRIP |
| 230 | RETICULOCYTE COUNTING FLUID | (READY TO USE & BSC CERTIFICATE-AR) 25ML |
| 231 | HCV RAPID KIT STRIP TEST (IC) | ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION.Sensitivity :100 %. Specificity -: More than 98 % |
| 232 | VDRL-RPR CARD TEST WITH CONTROLS (CHARCOAL ANTIGEN & ACCS) | ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE DURING TRANSPORTATION. |
| 233 | SYPHILIS Ab RAPID TEST KIT (DIP STRIP ) | Should be FDA/CE/WHO certified company.Principle -:Lateral flow chromatographic immunoassay Qualitative detection of Treponema Pallidum Antibodies ( IgM,IgA & IgG ) in human serum or plasma.Sensitivity -: 100 %. Specificity -: More than 99.7 %Should have 1 control Band & 1 control Band for validation. Self life -: More than one year.Pack Size -: 50 to 100 Test. Sensitivity & Specificity should be determined by WHO/Government authority. Additional requirement: Sensitivity & Specificity document get by company from third party (WHO/Government authority) for QC purpose, This document can be Single time or Frequently as per quality policy of the company. Minimum one document require at the time of document submission. Additional requirement:Company should provide the record for temprature maintainance during storage and transportation at the time of delivery of kit. |
| 234 | RAPID MALARIA KIT | ISO / CE/ WHO/GMP CERTIFIED,INDIVIDUALLY POUCHES SINGLE TEST FOR DETECTION OF P F HRP(HISTIDINE RICH PROTEIN) & PLASMODIUM SPECIES (P FALCIPARUM/VIVAX/P MALARIE / P OVE/ PLDH ) IN HUMAN BLOOD, ANALYTICAL SENSITIVITY OF 50 PARASITES / UL BLOOD,SEE THROUGH DEVICE,LONGER SHELF LIFE (APPROXIMATELY ONE & HALF YEAR),RESULT SHOULD TAKE MINIMUM TIME ,SENSITIVITY SHOULD BE 100 %,SPECIFICITY SHOULD BE 100%,PACK SIZE SHOULD BE 25/50 TEST. Sensitivity & Specificity should be determined by WHO/Government authority. Additional requirement: Sensitivity & Specificity document get by company from third party (WHO/Government authority) for QC purpose, This document can be Single time or Frequently as per quality policy of the company. Minimum one document require at the time of document submission. |
| 235 | LEPTOSPIRA RAPID KIT (FOR IgM DETECTION) | ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION |
| 236 | URINE PREGNANCY TEST KIT (STRIP ) | - |
| 237 | A.S.O.TEST KIT | RAPID SLIDE TEST,POSSITIVE & NEGATIVE CONTROL & NECESSARY ACCESSERIES ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 238 | R.A. TEST KIT | RAPID SLIDE AGGLUTINATION TEST METHOD WITH POSSITIVE & NEGATIVE CONTROLS & NECESSARY ASSECCERIES. ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 239 | C.R.P. TEST KIT | LATEX AGGLUTINATION TEST WITH CONTROL & NECESSARY ACCESSRIES. ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 240 | HIV RAPID TEST (WITHOUT ELIZA READER) | SHOULD DETECT HIV-1 & HIV-2 SEPERATELY, SHOULD HAVE INTERNAL COTROL, SHOULD BE BASED ON CASSETTE METHOD. ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 241 | WIDAL ANTIGEN SETS (SLIDE AGGLUTINATION ANTIGEN TEST) | WIDAL AGGLUTINATION ANTIGENS O,H,AH,BH (4 AGX5ML) POSSITIVE CONTROL IS TO BE PROVIDED WITH ACCESSORIES |
| 242 | HBsAG RAPID KIT | Should be FDA/CE/WHO certified company.The assay should have solid phase/particles coated with monoclonal antibodies to HBsAg. Sensitivity -: should be more than 99 %.Specificity -: More than 99 % (against whole HBsAg antigen) Should have minimum chance of cross reactivity.Detect all the 11 subtypes of HBsAg and mutant strain. Should have minimum indertminant result. Inter reader variability should be near to zero.Shelf life -: Minimum nine months.The pack size of the kit shall not be more than 50 Tests, wherein each device should be individually packed.The control should be able to detect human immunoglobulin and should not be just "procedural control" or meant for merely checking the flow of reagents or the integrity of the antigen.Sensitivity & Specificity should be determined by WHO/Government authority. Additional requirement: Sensitivity & Specificity document get by company from third party (WHO/Government authority) for QC purpose, This document can be Single time or Frequently as per quality policy of the company. Minimum one document require at the time of document submission. Additional requirement:Company should provide the record for temprature maintainance during storage and transportation at the time of delivery of kit. |
| 243 | WIDAL TUBE TEST FOR S.TYPHI O,H & PARATYPHI AH, BH(PACK SIZE 4X50ML) | Provide controls for each antigen with diffrent titres. ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 244 | WIDAL TUBE TEST FOR S. TYPHI O,H (PACK SIZE: 2+2X50ML) | Provide controls for each antigen with diffrent titres.ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 245 | HBSAG RAPID TEST KIT | RAPID VISUAL SENSITIVE & QUALITATIVE IN VITRO DIAGNOSTIC TEST,SHOULD HAVE MINIMUM CHANCE OF CROSS REACTIVITY,SHOULD HAVE SUPERIOR SENSITIVITY OF TEST,PRINCIPLE -: ENZYME IMMUNOASSAY BASED ON ANTIGEN CAPTURE, OR SANDWICH PRINCIPLE,USE FOR VISUAL, RAPID, SENSITIVE AND ACCURATE ONE STEP IMMUNOASSAY FOR THE QUALITATIVE DETECTION OF HEPATITIS B SURFACE ANTIGEN IN HUMAN SERUM OR PLASMA,PACK SIZE -: 20 TO 50 TEST.DETECT ALL THE 11 SUBTYPE OF HBSAG.SENSITIVITY -: 100 %,SPECIFICITY -: MORE THAN 99 % ( AGAINST WHOLE HBSAG ANTIGEN ),SHELF LIFE -: MORE THAN ONE YEAR.SHOULD HAVE TWO TEST DOTS & ONE CONTROL DOT FOR VALIDATION,ISO / CE/ WHO /GMP CERTIFIED. Additional requirement:Company should provide the record for temprature maintainance during storage and transportation at the time of delivery of kit. |
| 246 | DENGUE RAPID KIT (TO DETECT NS1 ANTIGEN, IgM, IgG ANTIBODIES | Sensitivity -: should be 100%.Specificity -: 99 % .ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 247 | CRYPTOCOCCAL ANTIGENT DETECTION TEST LATEX | - |
| 248 | TPHA KIT FOR Tp ANTIBODY DETECTION, BASED ON HA | - |
| 249 | SICKLING TEST (READY TO USE BASED ON QUALITATIVE SOLUBILITY TEST) | - |
| 250 | HIV RAPID (1 STEP) | Additional requirement:Company should provide the record for temprature maintainance during storage and transportation at the time of delivery of kit. |
| 251 | STRIP FOR DETECTION OF KETONE BODIES IN SERUM | SHOULD DETECT HIV-1 & HIV-2 SEPRATELY, SHOULD HAVE INTERNAL CONTROL, SHOULD BE BASED ON COMB METHOD. ADDITIONAL REQUIREMENTS OF CERTIFICATION FOR TEMPERATURE CONTROL DURING TRANSPORTATION. |
| 252 | RAPID HIV Ag+Ab DETECTION KIT (4TH GENERATION ) | Should be FDA/CE/WHO certified company.Principle -: enzyme immunoassay based on Sandwich Immunoassay HIV antigens and p24 antibody is Immobilized on a porous immunofiltration membrane.Sensitivity should be 100 %.Specificity should be 100 %.Use of Antigen gp-41, terminus of gp-120 for HIV-1antibodies and gp-36 for HIV-2 antibodies.Rapid visual sensitive & qualitative in vitro diagnostic Test.Should have minimum chance of cross reactivity.Should have superior sensitivity of test.Should have two separate dot for HIV 1 & 2 .One for p24 antigen & one for control.Based on flow through technology.Clear interpretation of report. Should have minimum indertminet result .Inter reader variability should be near to zero.Self life -: More than one year.Pack size -: 20 to 50 Test/kit.Sensitivity & Specificity should be determined by WHO/Government authority. Additional requirement: Sensitivity & Specificity document get by company from third party (WHO/Government authority) for QC purpose, This document can be Single time or Frequently as per quality policy of the company. Minimum one document require at the time of document submission.Additional requirement:Company should provide the record for temprature maintainance during storage and transportation at the time of delivery of kit. |
| 253 | Formalin 37-41% 500 ml | - |
| 254 | HEV Rapid card | HEV IgM Rapid Test is an IgM capture solid-phase immunochromatographic assay or lateral flow chromatographic immunoassay All antibodies of IgM class, when present in the test sample, should be captured by anti-human IgM antibodies immobilized on the membrane.CE/USFDA approved Sensitivity & Specificity should be determined by WHO/Government authority. Additional requirement: Sensitivity & Specificity document get by company from third party (WHO/Government authority) for QC purpose, This document can be Single time or Frequently as per quality policy of the company. Minimum one document require at the time of document submission Single seal packed Sensitivity 100% Specificity >95% |
| 255 | CHIKENGUNIYA IGM CARD TEST | One step immunochromatography assay to detect chekungunya specific IgM Antibodies with control line. Single sealed packed Sensitivity more than 97% Specificity more than 99% Sensitivity & Specificity should be determined by WHO/Government authority. Additional requirement: Sensitivity & Specificity document get by company from third party (WHO/Government authority) for QC purpose, This document can be Single time or Frequently as per quality policy of the company. Minimum one document require at the time of document submission. |
| 256 | Immersion oil for routine microscopy | immersion oil increases the resolving power of the microscope by replacing the air gap between the immersion objective lens and cover glass with a high refractive index medium and reducing light refraction. 100ml |
| 257 | Anti-A | • Monoclonal Antisera - formulated cell culture supernatant containing Murine IgM Anti A, suitable for slide, tube and plates. • A blend of monoclonal antibodies. • Potency, specificity and avidity shall be as per the criteria of DGHS 2003. • Should preferably detect common weaker variants. • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Packed in 5 ml vial. |
| 258 | Anti-B | • Monoclonal Antisera - formulated cell culture supernatant containing Murine IgM Anti-B, suitable for slide, tube and plates. • A blend of monoclonal antibodies. • Potency, specificity and avidity shall be as per the criteria of DGHS 2003. • Should preferably detect common weaker variants. • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Packed in 5 ml vial. |
| 259 | Anti-AB | • Monoclonal Antisera - formulated cell culture supernatant containing Murine IgM Anti - AB suitable for slide, tube and plates. • A blend of monoclonal antibodies. • Potency, specificity and avidity shall be as per the criteria of DGHS 2003. • Should preferably detect common weaker variants. • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Packed in 5 ml vial. |
| 260 | Anti-D | • Monoclonal Antisera - formulated cell culture supernatant containing Human IgM Anti D antibodies • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Potency, specificity and avidity shall be as per the criteria of DGHS 2003 • Should preferably detect common D variants. • Packed in 5 ml vial. |
| 261 | Anti-D | • Monoclonal Antisera - formulated cell culture supernatant containing Human IgG Anti D antibodies • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Potency, specificity and avidity shall be as per the criteria of DGHS 2003 • Should preferably detect common D variants. • Packed in 5 ml vial. |
| 262 | Anti-D | •Polyclonal Antisera - formulated cell culture supernatant containing Human Blend IgG + IgM Anti D antibodies • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Potency, specificity and avidity shall be as per the criteria of DGHS 2003 • Should preferably detect common D variants. • Packed in 10 ml vial. |
| 263 | Anti-A 1 | • Should be either lectin obtained from Dolicus biflorus diluted in buffered saline OR polyclonal / monoclonal antiserum • Neutral pH • Ready to use • Should differentiate clearly between A1 and A2 as well as A1B and A2B • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Potency, specificity and avidity shall be as per the criteria of DGHS 2003 • Packed in 5ml vial. |
| 264 | Anti-H | • Should be either lectin obtained from Ulex Europeus diluted in buffered saline OR polyclonal / monoclonal antiserum • Neutral pH • Ready to use • Should recognize “H†antigen on all human red cells • Should differentiate clearly between “Bombay phenotype†(Oh) and Others. • Reagent to be suitable for Slide, Tube and Micro-plate Assay • Potency, specificity and avidity shall be as per the criteria of DGHS 2003 • Packed in 5 ml vial. |
| 265 | Anti human globulin | • Polyspecific Anti Human Globulin prepared from a pool of Rabbit Anti-IgG serum and mouse monoclonal anti-C3b and anti-C3d. • Should be a blend of polyspecific Rabbit anti Human IgG and murine monoclonal anti C3b and C3d antibodies. • Should be for the detection of cell bound Blood group antibody and/or components of complement based on Direct Antiglobulin Test and Indirect Antiglobulin test. •Potency and specificity shall be as per the criteria of DGHS 2003. • Packed in 10 ml vial. |
| 266 | Anti human globulin | •Monospecific Anti Human Globulin prepared from a pool of Rabbit Anti-IgG serum . • Should be monospecific Rabbit anti Human IgG . • Should be for the detection of cell bound Blood group antibody based on Direct Antiglobulin Test and Indirect Antiglobulin test. •Potency and specificity shall be as per the criteria of DGHS 2003. • Packed in 10 ml vial. |
| 267 | Anti human globulin | •Monospecific Anti Human Globulin prepared from a pool of Rabbit Anti-C3 serum . • Should be monospecific Rabbit anti Human C3. • Should be for the detection of cell bound Blood group antibody based on Direct Antiglobulin Test and Indirect Antiglobulin test. • Potency and specificity shall be as per the criteria of DGHS 2003. • Packed in 10 ml vial. |
| 268 | 22% Bovine Albumin | • Suitable for enhancement of red cell agglutination reactions. • Should be derived from raw bovine serum. • Protein concentration should be 22% • Should be free from potential infectious risk as the source is bovine Serum. • The pH should be neutral. • Should be suitable for use with direct as well as indirect agglutination tests. • The conductivity should be controlled for serological applications • Packed in 10 ml vial • Storage temperature should be 2+ to 8+oC |
| 269 | Anti C Antisera | Monoclonal IgM- antibodies ,liquid, ready to use in 5ml vials preservative: <0.1% NaN3 cell line: MS-24 |
| 270 | Anti c Antisera | Monoclonal IgM- antibodies ,liquid, ready to use in 5ml vials preservative: <0.1% NaN3 cell line: MS-33 |
| 271 | Anti E antisera | Monoclonal IgM- antibodies ,liquid, ready to use in 5ml vials preservative: <0.1% NaN3 cell line: MS-260 |
| 272 | Anti e Antisera | Monoclonal IgM- antibodies ,liquid, ready to use in 5ml vials preservative: <0.1% NaN3 cell line: MS-16, MS-21, MS-63 |
| 273 | Anti Fya Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 274 | Anti Fyb Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 275 | Anti Lea Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 276 | Anti Leb Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 277 | Anti Lua Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 278 | Anti Lub Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 279 | Anti P antisera | Monoclonal IgM- antibodies ,liquid,ready to use preservative: <0.1% NaN3 , cell line 650 |
| 280 | Anti K, Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 281 | Anti k Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 282 | AntiKpa Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 283 | AntiKpb Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 284 | Anti S antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 285 | Anti s Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 286 | Anti M antisera | Monoclonal antibodies (mouse hybridoma), liquid, ready to use preservative: <0.1% NaN3 |
| 287 | Anti N antisera | Monoclonal antibodies (mouse hybridoma),liquid,ready to use preservative: <0.1% NaN3 |
| 288 | Anti Jsa Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 289 | Anti Jsb Antisera | IgM class antibody, ready to use preservative: <0.1% NaN3 |
| 290 | Anti JKa Antisera | IgM class antibody, cell line:MS-15, ready to use preservative: <0.1% NaN3 |
| 291 | Anti JKb Antisera | IgM class antibody, cell line:MS-15, ready to use preservative: <0.1% NaN3 |
| 292 | Coombs control cells | Coombs control IgG , red cell sensitised with IgG, in a 4%+/-1% suspension, ready to use, in 10 ml vials. |
| 293 | Acid Elution kit | • For rapid acid elution of antibodies from intact RBCs. • Containing Wash solution (concentrated) containing Glycine NaCl buffer, Elution solution containing a low pH glycine buffer with colour indicator in 10 ml vial. Buffer solution containing Tris buffer with bovine albumin(1-2%) in 10 ml vial. Storage temperature of kit : 2-8 0 C. • Shelf life : 1 year |
| 294 | EDTA Glycine Elution kit | •For elution of IgG from RBCs. •The kit should contain concentrated solution of sodium EDTA, low pH glycine solution, TRIS(hydroxymethyl)-aminomethane solution. •Storage temperature of kit : 2-8 0 C. •Shelf life : 1 year |
| 295 | Copper Sulphate Powder (CuSO4, 5 H2O) | 250gm per pack AR of GLAXO/ E.MERK/ RANBAXY/ UNILAB |
| 296 | Field Stain A | 500ml per pack AR GLAXO/ E.MERK/ RANBAXY/ UNILAB |
| 297 | Field Stain B | 500ml per pack AR GLAXO/ E.MERK/ RANBAXY/ UNILAB |
| 298 | Cryovial | To preserve the serum sample . 2ml vial |
| 299 | Antiseptic solution for phlebotomy | • Should be used for surgical cleaning of the arm(venipuncture site) of blood donor before collection of blood. • Should be bactericidal, fungicidal and virucidal. • Should be non-allergic and non- irritating. • Should be supplied with plastic container for easy handling. • Expiry : at least 12 months |
| 300 | Platelet additive solution 250ml | •Should be used for apheresis platelet concentrate or buffy coat platelet concentrate or random donor platelet in up to 80% platelet additive solution and 20% plasma to reduce plasma volume of platelet component to decrease adverse events e.g. TRALI and ABO mismatch. •Platelet quality, function, storage stability, morphology and cell integrity must be well maintained during processing and storage of platelet concentrate after adding platelet additive solution. •Platelet product can be stored up to 5 days at 20 to 240 C in platelet incubator with agitator. •Should be compatible with all available technologies for preparation of platelet components. (e.g. automated devices for whole blood and apheresis derived platelet.) •The container of solution should be made up of non PCV material e.g. Polyolefin. •Container should have connections for sterile connection and luer-lock for easy connection to apheresis kits. •Should have shelf life of 24 months. •The product should have been registered and licensed in India by DCG(I). •Should be available in volume of 250 ml. |
| 301 | Gram Stains Kit | 1 L |
| 302 | Alberts Metachromatic Stains Kit | - |
| 303 | ZN Acid Fast Stains | 1 L |
| 304 | Lactophenol Cotton Blue | 100 ML |
| 305 | Kovacs Indole Reagent | 100 ML |
| 306 | McFarland standard set | - |
| 307 | Giemsas Stain | 100 ML |
| 308 | Nigrosin Stain | 10% W/V, -100 ml |
| 309 | Oxidase Discs | 1 Vial |
| 310 | Hydrogen Peroxide | 500 ML |
| 311 | Immersion Oil, | 125 G |
| 312 | Pottasium Hydroxide flakes | 500 GM |
| 313 | Brain Heart Infusion broth | 500g |
| 314 | MacConkey w/o CV and NaCl, w/ 0.004% NR and 2.0 % Agar, | 500 g |
| 315 | Mueller Hinton Agar | 500 g |
| 316 | MacConkey Broth (Double strength) | 500 g |
| 317 | Mannitol Salt Agar Base, | 100 g |
| 318 | Peptone Water | 500 g |
| 319 | Sabouraud Dextrose Agar, | 500g |
| 320 | Tryptone Soya Broth | 100 g |
| 321 | Chrome Candida Differential | 500 g |
| 322 | Agar powder, Extra pureBiological grade | 500 g |
| 323 | Dextrose, Anhydrous | 500 g |
| 324 | Sheep Blood Agar Plate | - |
| 325 | Xylose Lysine Deoxycholate Agar Plate | - |
| 326 | PH Paper | pH range = 2 to 10.5 |
| 327 | pH tablets | Use for measurement and calibration of pH meter with pH 4. |
| 328 | pH tablets | Use for measurement and calibration of pH meter with pH 7 |
| 329 | pH tablets | Use for measurement and calibration of pH meter with pH 9.2 |
| 330 | Ordinary Filter Paper Sheet | Standard Size Whatman / Whatman type superquality. Size 57 cm X 46 cm. |
| 331 | Fixative Spray For Cytology | 50 ML |
| 332 | Test Tube Rack Alluminium | (15 mm Diameter Hole Size) (12 X 4 Tube Cap) |
| 333 | Test Tube Rack Alluminium | (18 mm Diameter Hole Size) (12 X 4 Tube) |
| 334 | Test Tube Stand For Test Tube | For 40 MM Diameter, 150 MM Length (Should Hold 12 Tubes - Two Row Of 6 Holes Each) It Should Be Made Of Metal With Powder Coating & It Has To Be Autoclavable) |
| 335 | Disposable Micro Tips For Auto Pipetes | 1-20 ul |
| 336 | Wooden Stick | 150 X 2.5 MM For Preparation Of Swabs Needed For Collection Of Exeudate |
| 337 | Amber Coloured Glass Dropping Bottle | 125 ML |
| 338 | GLASS MARKING PENCIL | - |
| 339 | Microscopic Cover Glass / Cover slip | Size of cover slip: 22 x 22 mm Material: optical glass Compatible to use for Clinical Microscope |
| 340 | MEASURING CYLINDER 500 ML PLASTIC AUTOCLAVABLE | 500 ML |
| 341 | MEASURING CYLINDER 1000 ML PLASTIC AUTOCLAVABLE | 1000 ML |
| 342 | IMPROVED NEUBERS CHAMBER | STANDARD QUALITY |
| 343 | SPREADER SLIDES | - |
| 344 | COVER GLASSES 18MM SQUARE (THIN NO.1) | - |
| 345 | URINE COLLECTION JAR CONICAL | - |
| 346 | VOLUMETRIC FLASK | 100 ML |
| 347 | VOLUMETRIC FLASK | 500 ML |
| 348 | MICROSCOPE HELOGEN BULB | 6V, 30W |
| 349 | PIPETTE 10ML GRADUATED BOROSILICATE GLASS | - |
| 350 | DROPPER BOROSILICATE | - |
| 351 | Thumb press dispensing dropper/ /Pateur pippettes | 3 ML (Pack of 50) |
| 352 | Sterile Disposable Petri Dish | 90 MM (Pack of 600) |
| 353 | FUNNEL | 3" diameter |
| 354 | ALUMINIUM HORIZONTAL TRAY | TO HOLD 20 SLIDES |
| 355 | FILTER CARDS THICK WHITE) WITH 01 HOLE (FOR CYTOSPIN-4) | THICK WHITE WITH ONE HOLE |
| 356 | EPPENDROFF TUBE (ALLIQUOTE) | 2.5 ML |
| 357 | EPPENDORF TUBE 1.5ML NON BINDING POLYPROPELENE TUBE, MOLECULAR GRADE | NON LOW BINDING SAFE LOCK- 1.5 ML |
| 358 | MICROCENTRIFUGE TUBE RACK, BENCHTOP FOR EFFICIENT PROCESSING | TRANSPORT AND TEMPORARY STORAGE OF SAMPLE PREPARATION TUBE, CRYOGENIC TUBE AND CUVETTES |
| 359 | Empty Tip Box | 200 µl |
| 360 | Empty Tip box | 1000 µl |
| 361 | Centrifuge tube | 15 ML |
| 362 | Centrufge tube | 50 ml - round bottom |
| 363 | Disposable Micro Tip | PP 1 to 20 µl |
| 364 | Disposable Micro Tip | PP 200 µl |
| 365 | Disposable Micro Tip | PP 1000 µl |
| 366 | Tips 2-200ul | For dispensing samples/reagents in routine immunohematology tests |
| 367 | Tips 100-1000 ul | For dispensing samples/reagents in routine immunohematology tests |
| 368 | DISPOSABLE TIPS SMALL | (0-200UL) |
| 369 | Lancets | For Hb estimation and blood grouping by finger prick. Should fit the lancet gun device. Should have protective cap. |
| 370 | Sterile pure viscos swab | - |
| 371 | Sterile container with spatula | 20 ml |
| 372 | Sterile Cotton Swab for surveillance | - |
| 373 | Mucus Extractor | - |
| 374 | Sterile Urine collection container, leak-proof, wide mouth and screw-capped | 50 ml |
| 375 | PLASTIC CONTAINER FOR URINE & STOOL ROUTIN MICRO WIDE MOUTH CAP. | 100 ML |
| 376 | STERILIZED SCREW CAPPED UNIVERSAL PLASTIC CONTAINER CAP | 50 ML |
| 377 | COPLIN JAR (PLAS.TIC)WITH COVER STAIN PURPOSE | 30 ML |
| 378 | COUPLIN JAR | 100 ML BOROSILICATE GLASS |
| 379 | BAND AID SPOT | 22 MM DIAMETER |
| 380 | DISPOSABLE TIPS LARGE | (100-1000 UL) |
| 381 | SLIDE BOX PLASTIC | 50 SLIDE CAPACITY |
| 382 | TISSUE CUTTING KNIVES | FOR GROSSING PURPOSE IN HISTOPATHOLOGY & AUTOPSY STAINLESS STEEL AROUND 35 MM LENGTH WITH HANDLE & ONE SIDE SHARPCUTTING EDGE. |
| 383 | TISSUE CASSETS | PLASTIC IN DIFFERENT COLOUR |
| 384 | CONICAL FLASKS | 250 ML BOROSILICATE |
| 385 | REAGENT BOTTLES | 125 ML |
| 386 | TEST TUBE HOLDER | - |
| 387 | LITMUS PAPER | - |
| 388 | MEASURING CYLINDER | 100 ML |
| 389 | MEASURING CYLINDER | 500 ML |
| 390 | MEASURING CYLINDER | 1000ML BOROSILICATE GLASS |
| 391 | WIDAL TEST TUBE RACK | PLASTIC |
| 392 | MICROPIPETTE | 1 TO 40ul |
| 393 | MICROPIPETTE | 20 TO 200ul |
| 394 | MICROPIPETTE | 200 ul TO 1 ml |
| 395 | TEST TUBE GLASS | 12 MM x 75 MM |
| 396 | Disposable Plastic Test Tubes | • Should made from good quality transparent colourless plastic. • Size : 12 mm x 75 mm • Without screw cap |
| 397 | DIAMOND MARKER | - |
| 398 | MICROPIPETTES .(WITH STAND TABLE TOP & CALIBRATION CERTIFICATE) | 10 uL FIX. VOL |
| 399 | MICROPIPETTES .(WITH STAND TABLE TOP & CALIBRATION CERTIFICATE) | 20 uL FIX. VOL |
| 400 | MICROPIPETTES .(WITH STAND TABLE TOP & CALIBRATION CERTIFICATE) | 25 uL FIX. VOL |
| 401 | MICROPIPETTES | 50 uL-200 uL VARI. VOLUME WITH CALIBRATION CERTIFICATE |
| 402 | MICROPIPETTE FIXED VOLUME WITH CALIBRATION CERTIFICATE | 50 uL |
| 403 | MICROPIPETTE FIXED VOLUME WITH CALIBRATION CERTIFICATE | 5 uL |
| 404 | MICROPIPETTE FIXED VOLUME WITH CALIBRATION CERTIFICATE | 1000 uL |
| 405 | MICROPIPETTE FIXED VOLUME WITH CALIBRATION CERTIFICATE | 200 uL |
| 406 | MICROPIPETTE FIXED VOLUME WITH CALIBRATION CERTIFICATE | 500 uL |
| 407 | MICROPIPETTE VARIALE VOLUME WITH CALIBRATION CERTIFICATE | 100uL - 1000uL |
| 408 | MICROPIPETTE VARIALE VOLUME WITH CALIBRATION CERTIFICATE | 2uL - 20uL |
| 409 | MICROPIPETTE VARIALE VOLUME WITH CALIBRATION CERTIFICATE | 5uL - 50uL |
| 410 | MICROPIPETTE VARIALE VOLUME WITH CALIBRATION CERTIFICATE | 0.5uL - 10uL |
| 411 | MICROPIPETTE VARIALE VOLUME WITH CALIBRATION CERTIFICATE | 10uL - 100uL |
| 412 | PLASTIC DROPPING BOTTLE | 100 ML |
| 413 | SLIDE STAND FOR DRYING (ALUMINIUM) | Should hold 20 Slide |
| 414 | TEST TUBE BRUSH | SMALL |
| 415 | TEST TUBE BRUSH | LARGE |
| 416 | TEST TUBE BRUSH | MEDIUM |
| 417 | SLIDE STAINING RACK ALUMINIUM | 24"INCH OF 2 RODES |
| 418 | DOUBLE POINTED NEEDLE FOR VACUTAINER | 22G X 1" INCH. WHERE ONE END IS COVERED WITH RUBBER VALVE & OTHER END FOR VEIN |
| 419 | FILTER PAPER | 90 MM |
| 420 | RETRACTILE, SINGLE USE SAFETY LANCET FOR CAPILLARY BLOOD COLLECTION | USFDA CERTIFICATE, ISO / CE CERTIFICATE, S INGLE TIME USEABLE LANCET WITH NEEDLE 23 G X DEPTH 1.8 MM, STERILE ( GAMA / ETO ),MADE OF PET MATERIAL, SAFETY TIP CLOSURE, AUTO LOCK BUTTON,AUDIBLE CLICK, BATCH-WISE STERILITY / NON- PYROGENICITY / NON-TOXICITY CERTIFICATE, ADEQUATE COMBUSTION DATA TO PROVE THAT IT IS SAFE FOR THE ENVIRONMENT UPON, 5 YEARS MANUFACTURING LICENSE FOR EVACUATED BLOOD COLLECTION TUBE, FROM THE SUPPLIERS, PROOF OF SUPPLY TO AT LEAST THREE GOVERNMENT INSTITUTES / HOSPITALS, INSTRUMENT COMPATIBILITY CERTIFICATES FROM VARIOUS INSTRUMENT MANUFACTURERS, EXPIRY SHOULD BE MINIMUM OF 6 MONTHS. |
| 421 | EDTA Tubes (2 ml) Vaccume Tube | 2 ML Vaccume Tube Spray-dried K2 EDTA - additive as per NCCLS/CLSI Guideline with pierceable and airtight safety cap Tube Size 13x75mm, CE/US FDA approved Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 422 | EDTA Tubes (3/4 ml) Vaccume Tube | 3 ML/ 4 ML Vaccume Tube Spray-Dried K2 EDTA - Additive As Per NCCLS/CLSI Guideline With Pierceable And Airtight Safety Cap Tube Size 13x75mm CE/US FDA Approved Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 423 | Plain Gel Tubes Vaccume Tube | Vaccume Gel Tubes Clot Activator-Additive As Per NCCLS/CLSI Guideline With Pierceable And Airtight Safety Cap, Volume:3.5ml /4ml/5ml Tube Size 13x75 Mm CE/US FDA Approved, Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 424 | Sodium Citrate 2.7 Ml Vaccum Tube | Vaccume Tube 3.2% Buffered Sodium Citrate - Additive As Per NCCLS/CLSI Guideline, With Pierceable And Air-Tight Safety Cap. Cap Rubber Quality Must Be Good Volume:2.7ml, Tube Size 13x75 Mm, Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 425 | Disposable ESR Tube/pipettes | Volume:1.6 Ml/2 Ml, Tube Size 13x75 Mm, Sterile -Gamma Radiation Batch-Wise Sterility Certificate Must Be Provided |
| 426 | Needle With Safety Lock Or Holders for Vaccutainer | Needle With Safety Shielding Mechanism To Prevent Needle Stick Injury And Spillage Post Usage Must Be Provided With Tubes Needle Size:22G/23G Two Holders Per 100 Needles Should Be Supplied CE/US FDA Approved, Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 427 | Flash Back Collection Needles | Needle Size 22Gx1" With Flash Back Facility To See Vein Punctured Or Not, Minimum 2 Holders Should Be Provided Free Along With 100 Needles, CE/US FDA Approved, Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 428 | EDTA Tube For Peadiatric Collection Non Vaccume Tube | Plastic Microtube Coated With Spray-Dried K2 EDTA-Additive As Per CLSI Guidelines., Volume :0.5ml, Lavender Color Plastic Cap Having Scoop Shaped Mouth For Easy Blood Flow Lot Number And Expiry Mentioned On Tube Paper Label. CE/US FDA Approved, Sterile -Gamma Radiation |
| 429 | Plain Tube For Peadiatric Collection | Plastic Micro Tubes With Clot Activator-Additive As Per CLSI Guidelines, Volume :0.5ml/1 Ml, A Red Color Plastic Cap Having Scoop Shaped Mouth For Easy Blood Flow, Lot Number And Expiry Mentioned On Tube Paper Label. CE/US FDA Approved, Sterile Gamma Radiation |
| 430 | Sodium Citrate Tube For Peadiatric Collection Non Vaccume Tube | 3.2 % Sodium Citrate Additive As Per NCCLS/CLSI Guideline, Volume 1 Ml/2 Ml. CE/US FDA, Approved, Sterile Gamma Radiation |
| 431 | Plain Clot Activator Tubes Vaccume Tube | Vaccume Clot Activator Tubes Additive As Per NCCLS/CLSI Guideline With Pierceable And Airtight Safety Cap Voulme:3.5ml/4ml/5ml, Tube Size 13x75 Mm CE/US FDA, Approved, Sterile Gamma Radiation |
| 432 | Sodium Fluoride Tubes Vaccume Tube | Evacuated Tubes Sodium Fluoride + Potassium Oxalate Or Sodium Flouride +K2 EDTA/NA2 EDTA Additive As Per NCCLS/CLSI Guideline, Volume :2 Ml, Tube Size 13x75 Mm CE/US FDA Approved, Sterile Gamma Radiation |
| 433 | Sodium Heparin Tubes (3.5/4 ml) Vaccume Tube | Evacuated Tubes Sodium Heparin-Additive As Per NCCLS/CLSI Guideline, With Pierceable And Airtight Safety Cap Volume : 3.5ml/4 Ml Tube Size 13x75 Mm, CE/US FDA Approved, Sterile Gamma Radiation |
| 434 | Sodium Heparin Tubes (5/6 ml) Vaccume Tube | Evacuated Tubes Sodium Heparin-Additive As Per NCCLS/CLSI Guideline, With Pierceable And Airtight Safety Cap Volume : 5ml/6 Ml CE/US FDA Approved, Sterile Gamma Radiation |
| 435 | EDTA 2 ml Non Vacuum Tube | Non Vacuum Tube Spray-Dried K2 EDTA - Additive As Per NCCLS/CLSI Guideline With Pierceable And Airtight Safety Cap Volume: 2ml Tube Size 13x75mm, CE/US FDA Approved Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 436 | EDTA 3 ml/ 4ml Non Vacuum Tube | Non Vaccum Tube Spray-Dried K2 EDTA - Additive As Per NCCLS/CLSI Guideline With Pierceable And Airtight Safety Cap Volume: 3 Ml /4ml Tube Size 13x75mm, CE/US FDA Approved Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 437 | Plain Clot Activator Tube Non Vacuum Tube | Non Vacuum Tube Clot Activator Tubes Additive As Per NCCLS/CLSI Guideline, With Pierceable And Airtight Safety Cap Voulme:3.5ml/4ml/5ml, Tube Size 13x75 Mm CE/US FDA, Approved, Sterile Gamma Radiation |
| 438 | Plain Gel Tubes Non Vaccume Tube | Non Vacuum Tube Clot Activator-Additive As Per NCCLS/CLSI Guideline With Pierceable And Airtight Safety Cap, Volume:3.5ml /4ml/5ml Tube Size 13x75 Mm CE/US FDA Approved, Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 439 | Sodium Citrate (2.7 ml) Non Vacuum Tube | Non Vacuum Tube 3.2% Buffered Sodium Citrate - Additive As Per NCCLS/CLSI Guideline, With Pierceable And Air-Tight Safety Cap. Cap Rubber Quality Must Be Good Volume:2.7ml, Tube Size 13x75 Mm CE/US FDA Approved Sterile -Gamma Radiation, Batch-Wise Sterility Certificate Must Be Provided |
| 440 | Sodium Fluoride Non Vacuum Tube | Non Vacuum Tube Sodium Fluoride + Potassium Oxalate Or Sodium Flouride +K2 EDTA/NA2 EDTA Additive As Per NCCLS/CLSI Guideline Volume :2 Ml, Tube Size 13x75 Mm CE/US FDA Approved Sterile Gamma Radiation |
| 441 | Sodium Heparin (3.5/4 ml) Non Vacuum Tube | Non Vacuum Tube Sodium Heparin-Additive As Per NCCLS/CLSI Guideline, With Pierceable And Airtight Safety Cap Volume : 3.5ml/4 Ml Tube Size 13x75 Mm, CE/US FDA Approved, Sterile Gamma Radiation |
| 442 | Sodium Heparin (5/6 ml) Non Vacuum Tube | Non Vacuum TubeNon Vacuum Tube Sodium Heparin-Additive As Per NCCLS/CLSI Guideline, With Pierceable And Airtight Safety Cap Volume : 5ml/6 Ml CE/US FDA Approved, Sterile Gamma Radiation |
| 443 | Sterile container with spatula | 20 ml (1x100) |
| 444 | Flexilble inoculating Loop | 4 MM |
| 445 | StabFlexiLoop Plus | 4 MM |
| 446 | Metaloop- Stainless Steel | 4 MM |
| 447 | Nichrome Loop | 4 mm diameter |
| 448 | Borosilicated screw-capped wide mouth jar for media preparation | 500 ML |
| 449 | McCartney bottle w/aluminium cap Neutral Glass | 30 ML |
| 450 | Microscope Glass Slide, Ground edges, frosted one end | - |
| 451 | Glass Slide | • Microscopic polished edge and lint free glass slides. • Should made from transparent colourless glass. • Should have refractive index (Ne) 1.53 +- 0.02. • Size : 76 mm x 26 mm; Thickness : 1.10 mm. |
| 452 | Concavity slide, two cavity | 75x25 mm Size 1.4 mm |
| 453 | Borosilicated glass rimless | 18x150 mm |
| 454 | Borosilicated glass rimless | 15x150 mm |
| 455 | Durhams tube | - |
| 456 | Ink Pen for temperature recording chart | Ink Pen for temperature recording chart to record 7 days (weekly) Temperature on chart Should be made up of good quality and Ink should not be spread out. |
| 457 | Double Distilled Water | Clear Appearance. pH should be between 6 to 7. Pack size 10 liter. |
| 458 | Adsorption kit for warm autoantibody | •Should remove warm reactive autoantibody from red blood cells to facilitate resolution of serological complexities. •The reagent is based on the ZZAP reagent. •Should have lyophilized dithiothreitol and cysteine-activated papain in a phosphate buffer. •50 or 100 tests/ kit. •Shelf life of reconstituted reagent should be at least 5 days. •Storage temperature of kit : 2-8 0 C. •Shelf life : 1 year |
| 459 | Adsorption kit for cold autoagglutinins | •Should use rabbit erythrocyte stroma for adsorption of cold agglutinins Anti-I, Anti-H or Anti-IH. •Should contains a saline suspension of rabbit erythrocyte stroma for autoadsorption of cold autoagglutinin. •Should have long expiry and stability. |
| 460 | Rapid Malaria antigen detection | Rapid visual antigen based test for detecting infection with Plasmodium falciparum (HRP-2) and Plasmodium vivax (pLDH) of Malaria parasite in human whole blood. • Easy to run. Total test time should not be more than 30 minutes • Easy to interpret colour bands. • Storage at +40C to +300C • Sensitivity of the test should be 100% • Specificity of the test should be 99.8% • Adequate literature detailing the components, methodology, validity criteria, performance characteristics, storage conditions and expiry date should be provided with each kit. • The kit procured should have approval of the statutory authority in its country of origin. In case of imported kits it should have been registered and licensed in India by DCG (I) and as per NACO guidelines • The kit should have a shelf life of minimal 18-24 months at the time of delivery. • Preferable Pack size of 25 tests wherein each device should be individually packed |
| 461 | TPHA rapid kits for Syphilis detection | • Should be rapid test based on detection of antibodies(IgM and IgG) to treponema pallidum qualitaitvely in human serum or plasma. • Should be based on the principle of detection of antibodies(IgM and IgG) to treponema pallidum recombinant antigen • Should have control line indication for validity of test. •Total test time should not be more than 30 minutes. • The sensitivity should be > 99% • The specificity should be > 99 % • The kit should have all accessories required for the test. Adequate literature detailing the components, methodology, validity criteria, performance characteristics, storage conditions and expiry date should be provided with each kit. • The kit should have a shelf life of minimal 12 months at the time of delivery. • Storage temperature for the kit should be +2 to +8oC. • The kit procured should have approval of the statutory authority in its country of origin. In case of imported kits it should have been registered and licensed in India by DCG (I) and as per NACO guidelines. |
| 462 | Single Blood bag (350 ml) | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Single blood bag – 350 ml. Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • CPDA1 (49 ml) • Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPDA Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature upto -80C without breakage. |
| 463 | Triple Blood Bag (350 ml) with sample pouch | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity : Triple blood bag Primary bag – 350 ml First Satellite bag (300 ml) containing additive solution for 42 days red cell storage. Second Satellite bag (300 ml) for platelet storage for 5 days • Sample pouch/diversion pouch for collection of first 15 to 20 ml blood Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • CPDA1 (49 ml) • Additive Solution (80 ml)• Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPD-Sagm Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand |
| 464 | Triple Blood Bag (450 ml) with sample pouch | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Triple blood bag Primary bag – 450 ml First Satellite bag (300 ml) containing additive solution for 42 days red cell storage. Second Satellite bag (300 ml) for platelet storage for 5 days • Sample pouch/diversion pouch for collection of first 15 to 20 ml blood Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • CPDA1 (49 ml) • Additive Solution (80 ml)• Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPD-Sagm Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand |
| 465 | Quadruple blood bag (350 ml) top and top with sample pouch | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Quadruple blood bag Primary bag – (350 ml) with top and top First Satellite bag – containing additive solution for 42 days red cell storage Second Satellite bag (300 ml) for platelet storage for 5 days Third Satellite bag (300 ml) • Sample pouch/diversion pouch for collection of first 15 to 20 ml blood Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • CPDA1 (49 ml) • Additive Solution (80 ml) – First Satellite bag • Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPD-Sagm Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C |
| 466 | Quadruple blood bag (450 ml) top and top with sample pouch | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Quadruple blood bag Primary bag – (450 ml) with top and top. First Satellite bag – containing additive solution for 42 days red cell storage, Second Satellite bag (300 ml) for platelet storage for 5 days Third Satellite bag (300 ml) Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • • CPD ( 63 ml) – Primary bag only • Additive Solution (100 ml) – First Satellite bag • Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPD-Sagm Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C to 240C without b |
| 467 | Quadruple blood bag (450 ml) top and bottom with sample pouch | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Quadruple blood bag : Primary bag – (450 ml) with top and bottom . First Satellite bag – containing additive solution for 42 days red cell storage Second Satellite bag (300 ml) for platelet storage for 5 days Third Satellite bag (300 ml) Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • • CPD ( 63 ml) – Primary bag only • Additive Solution (100 ml) – First Satellite bag • Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPD-Sagm Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g |
| 468 | Penta Blood Bag (450 ml) with sample pouch with in-line leukocyte reduction filter | Blood collection bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Penta blood bag Primary bag – (450 ml) with top and bottom or top and top. First Satellite bag – containing additive solution for 42 days red cell storage Second Satellite bag (300 ml) for platelet storage for 5 days Third Satellite bag (300 ml) Fourth satellite bag (300 ml) Should comply to ISO 3826 standards for all the parameters & CONFIRMS TO ISO3826 SHOULD BE PRINTED ON LABEL. • Sterilization process should be according to ISO 17665-1 • Should reduce moisture loss Design and shapes: • Flexible pre-sterilized, Pyrogen free , Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags. Tubing of bag: • Flexible non-kinking, Non-sticking ,Transparent • Leak-proof. • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers with clear visibility. Needle: • 16 gauge ultra thin walled and straight. • Sharp regular margins and beveled tip. • Rust proof. • Tightly fixed with hub covered with sterile guard. • Hermetically sealed External Port: • Tamper proof • Shouldn’t be re-capped • Easily accessible Package: • Protective dual packaging (Individual & 4 layer Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Anticoagulant and preservative solution: • • CPD ( 63 ml) – Primary bag only • Additive Solution (100 ml) – First Satellite bag • Clear & colourless • No discolouration on storage at room temperature • Manufacturer to supply anticoagulant quality check certificate along with stability test report on CPD-Sagm Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -80C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag, should have barcode printing and not stamping • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity |
| 469 | Transfer Bags (300 ml) capacity | Transfer bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Single blood bag – 300 ml Should comply to ISO 3826 standards for all the parameters, Design and shapes: • Flexible pre-sterilized • Pyrogen free • Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags Tubing of bag: • Flexible non-kinking • Non-sticking • Transparent • Leak-proof • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers Package: • Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -800C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature upto -800C without breakage. |
| 470 | Transfer Bags (600 ml) capacity | Transfer bag made up of DEHP plasticized PVC, collapsible, collapsible non-vented sterile containers complete with collecting tube for completely closed system to avoid the chances of contamination. Capacity: Single blood bag – 600 ml Should comply to ISO 3826 standards for all the parameters, Design and shapes: • Flexible pre-sterilized • Pyrogen free • Non-toxic, non-haemolytic, biocompatible material • No risk of contamination and air embolism (closed system) with all leaks proof seals (Disposable Bags). • Slit on the both sides of the bags Tubing of bag: • Flexible non-kinking • Non-sticking • Transparent • Leak-proof • The tubing should have same ID number as that on the bag • The tube should have multiple printed ID numbers Package: • Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag. • Easy to handle Label: • Non-peel off • Heat sealed labels • Remain attached between room temperature to -800C with a transparent adhesive • Date of manufacturing, date of expiry and lot number must be mentioned on each bag • The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand a acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature upto -800C without breakage. |
| 471 | Quintuple in-line filter bags | •Quintuple In-Line Redcell filter 450ml bags with SAGM - 4 PVC DEHP bags and 1 PVC TOTM coated Bag and LCRD filter for Plasma, Buffy-coat derived Paltelte cocnentrate and Leuco depleted red cell concentrate preparation • Soft housing LCRD filter offers a first step to move buffy -coat method with short filtrationduration below 20 min and optimal leucoreduction • High Componenet recovery filter >90%. • LCRD enables the filteration up to 24 hrs after collection at room temperature and up to 48 hrs after collection and storage at 1 ?C to 6 ?C • Angled Bevel 16 guage needle with silicon coating to reduce penetration force , • Color making at the top of the hub indicating the bevel orientation and needle diameter , • Molded needle hub with lining • Same segment no in each tubing, • Bactivam – pre donoation sampling pouch allows collection of 40ml of blood that may contain skin bacteria thus prevents contamination of complete blood unit and safety of receipients • Secuvam – Needle safety guard with unique locking mechanism to cover needle after blood collection ensuring safety of healthcare workers from needle stick injuries. Irreversible lock with audio locking system |
| 472 | Buffy coat Pooling set | • Buffy coat Pooling system comes with Manifold 6 tubings for Buffy Pooling , Dedicated tubing for additive solution bag , TXP Filter (Optimal solution for leucocyte removal from Platelet concentrate ) ,2 PVC -DEHP bags and 1PVC-BTHC(OXY-PL) bag for Platelet storage • Train and Octopus Both Buffy Pooling method can be done • centrifuge compatable bags and Filter • Paltelet storage bag made of PVC-BTHC allows a better Platlet viability due to its permiability • Extremely high leucreduction preformace with a log reduction higher than 4 • Validated upto 24hrs after the collection v) Platelet storage volume 1800 mL • SCD compatable tubings vii) Screw on/off sampling site viii) Steam sterilizationn used and comes with 2 years shelf life |
| 473 | Red cell Leukodepletion filters-Lab side with transfer bag | •Should provide 4 log reduction of leucocytes. With transfer bag with 300-600 ml capacity •Should be made of proven biocompatible material which is neutral/positively charged/negatively charged. •If the filter requires priming, it should be suitable for easy and small volume priming. Rinsing of the filter should not required. •For laboratory type filter there should be a convenient system for air vent facility. •RBC losses should not be greater than 10%. •Sterilization by ethylene oxide gas • Should avoid cellular inactivation |
| 474 | Platelet Leukodepletion filters-Lab side | •Should provide 4 log reduction of leucocytes. •Should be made of proven biocompatible material which is neutral/positively charged/negatively charged. • If the filter requires priming, it should be suitable for easy and small volume priming. Rinsing of the filter should not required. •For laboratory type filter there should be a convenient system for air vent facility. • Platelet loss should be minimal. • Sterilization by ethylene oxide gas • Should avoid cellular inactivation |
| 475 | Standard Blood Transfusion Set | • Standard blood transfusion sets should be made up of medical grade PVC, designed for transfusion of blood or blood component. • The plastic should be non-toxic and pyrogen free. • It should have a moulded cylindrical drip chamber fitted with sharp plastic spike and a nylon filter with a pore size ranging from 170-260 microns. • The drip chamber containing the filter should be clear, transparent and have an adequate space for drop rate counting. The filter should be on top drip chamber for easy management • The plastic of the drip chamber and blood transfusion set tubing should have good elastic recoil to withstand manual or roller clamp compression. • There should be a roller type regulator for accurate control of flow of blood or blood component • The male port should be sturdy at least 1½ inches long with vertical slits for proper flow of blood. • Female port should be able to fit snuggly with all the available venous access devices in the market. • There should be moulded bubble latex tube attached to the female port for extra medication • 18 G vein needle with protective cap. • It should be pre-sterilized with ethylene oxide /gamma rays and ready for use. • It should accompany a sterility report. • All PVC items should be of certified medical grade only. • All the connections in the blood transfusion set should be leak proof. • Standards:ISO 10993;IS 1135;USP Class IV;CE |
| 476 | Temperature recording chart for platelet incubator agitator Remi | • For model PI 10 Ultra • 7 days (weekly) Temperature recording . • Should be made up of good quality paper and Ink should not be spread out. • Temperature range should be 0 to +40 0 c |
| 477 | Temperature recording Chart for -400 C plasma freezer Remi | • For model RPF 336 Ultra • 7 days (weekly) Temperature recording . • Should be made up of good quality paper and Ink should not be spread out. • Temperature range should be -500 to +30 0c |
| 478 | Temperature recording Chart for -800 C plasma freezer Remi | • For model ULT 360 Ultra low deep freezer • 7 days (weekly) Temperature recording . • Should be made up of good quality thermal paper and Ink should not be spread out. • Temperature range should be -1000 to +50 0 c |
| 479 | Amikacin | 30 mcg |
| 480 | Gentamicin | 10 mcg |
| 481 | Netilmicin | 30 mcg |
| 482 | Tobramycin | 10 mcg |
| 483 | Doripenem | 10 mcg |
| 484 | Ertapenem | 10 mcg |
| 485 | Imipenem | 10 mcg |
| 486 | Meropenem | 10 mcg |
| 487 | Cefixime | 5 mcg |
| 488 | Cefoperazone | 75 mcg |
| 489 | Cefope.+Sulbactam | 50/50 mcg |
| 490 | Cefotaxime | 30 mcg |
| 491 | Cefpirome | 3 mcg |
| 492 | Ceftazidime | 30 mcg |
| 493 | Ceftriaxone | 30 mcg |
| 494 | Cefuroxime | 30 mcg |
| 495 | Cephalothin | 30 mcg |
| 496 | Cefepime | 30 mcg |
| 497 | Cefepime+Tazobactam | 30/10 mcg |
| 498 | Cefoxatin | 30 mcg |
| 499 | Ciprofloxacin | 5 mcg |
| 500 | Levofloxacin | 5 mcg |
| 501 | Moxifloxacin | 5 mcg |
| 502 | Nalidixic Acid | 30 mcg |
| 503 | Norfloxacin | 10 mcg |
| 504 | Ofloxacin | 5 mcg |
| 505 | Sparfloxacin | 5 mcg |
| 506 | Teicoplanin | 30 mcg |
| 507 | Vancomycin | 30 mcg |
| 508 | Clindamycin / Lincomycin | 2 mcg |
| 509 | Azithromycin | 15 mcg |
| 510 | Clarithromycin | 15 mcg |
| 511 | Erythromycin | 15 mcg |
| 512 | Aztreonam | 30 mcg |
| 513 | Linezolid | 30 mcg |
| 514 | Ampicillin | 10 mcg |
| 515 | Amox.+clav.Acid | 30 mcg |
| 516 | Ampicillin+Sulbactam | 10/10 mcg |
| 517 | Oxacillin | 1 mcg |
| 518 | Penicillin G | 10 units |
| 519 | Ticarcillin | 75 mcg |
| 520 | Ticarcillin+Clav.acid | 75/10 mcg |
| 521 | Piperacillin | 100 mcg |
| 522 | Piperacillin +Tazobactam | 100/10 mcg |
| 523 | Co-trimoxazole | 25 mcg |
| 524 | Tetracycline | 30 mcg |
| 525 | Tigecycline | 15 mcg |
| 526 | Minocycline | 30 mcg |
| 527 | Chloremphenicol | 30 mcg |
| 528 | Nitrofurantoin | 300 mcg |
| 529 | Furazolidone | 50 mcg |
| 530 | Fosfomycin | 200 mcg |
