Supply And Fixing Various Park In Open Gym Equipment Municipal Council Area Dungarpur Supply And Fixing Various Park In Open Gym Equipment Municipal Council Area Dungarpur , Providing And Installation , 8 In Combination Set:- *Product Dimnsions: - D.I., dungarpur-Rajasthan

Supply And Fixing Various Park In Open Gym Equipment Municipal Council Area Dungarpur Supply And Fixing Various Park In Open Gym Equipment Municipal Council Area Dungarpur , Providing And Installation , 8 In Combination Set:- *Product Dimnsions: - D.I.A 4000Mm *Safe Workoutarea: - D.I.A. 5000Mm *Product Dimnsions: - D.I.A 4000Mm .*Safe Workoutarea: - D.I.A. 5000Mm *Combination Made From “B” Class G.I. Pipe. The Octagonal Structure Is Made Up Of 100Mm Nb “B” Class Gi Pipe. Round Plate Of 250Mm Diameter & 10Mm Thickness Is Welded At Bottom Of Octagonal Structure. The Links Are Made Up Of 25Mm Nb “B” Class G.I. Pipe. The Handle And Seat Frame Of Seated Puller Is Made From 32Mm Nb “B” Class G.I. Pipe. For The Assembly Different Bushes Are Used Which Is Made From Seamless Pipe Of 50Mm Od And 5Mm Thickness & 5Mm Solid Bar Is Used. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300Mm X 2Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20Mm With No Sharp Edges. Leg Press Footrest Consists Of 25 Nb Diameter Hardened Low Carbon Steel Material. The Nut Bolts Used For Assembly Are Made From S.S. Material. The Bushes ( Stopper ) Used To Avoid The Collusion Made From Poly Urethin Plastic Material Of 50Mm Diameter. Surfing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. 300Mm Diameter X 10Mm Thick Plate Can Be Used For Rotating Sear Of Seating Twister With 50 Nb Vertical G.I. Pipe. Closing Caps Made From High Quality Frp Material Which Is Of 2Mm Thickness. The Pints Used Are Made Up Of 17Mm Diameter Solid Bar. The Bearing Used Are Of “6205” Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Assembly Are Made From M.S. Pre-Galvanized Material. A17, A24, A34 Circlips Are Used For Assembly. The Footrests Are Made From Casted Aluminum Material. Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate. It Has Bolting Provision For Mounting On Concrete Slab.All As Per Eic. , Providing And Installation 5 In 1 Combination ( Shoulder Press+ Chest Press+ Knee Chair+ Seating And Standing Twister ) • Product Dimensions: - 2410Mm ( Length ) X 1720Mm ( Width ) X 2350Mm ( Height ) . • Safe Workout Area: - 4500Mm ( Length ) X 4500Mm ( Width ) . Combination Made From “B” Class G.I. Pipe. The Center Pipe Is Of 100Mm Nb Pipe. Round Plate Of 248 Mm Diameter & 9Mm Thickness Is Welded At Bottom. The Links Are Made Up Of 25Mm Nb Pipe. The Handle And Seat Frame Of Shoulder Press Is Made From 32Mm Nb Pipe. For The Assembly Different Bushes Are Used Which Is Made From Seamless Pipe Of 50Mm Od And 5Mm Thickness & 50Mm Solid Bar Is Used. Chest Press Frame Is Of 32Mm Nb Pipe. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300 Mmx1.8Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. The Chest Press Footrest Consists Of 25 Nb Pipe. The Pins Used In Are Made Up Of F25 Mm, F35mm & F45mm Bright Material. The Nut Bolts Used For Assembly Are Made From Height Tensile Steel With Galvanized Material. The Bushes ( Stopper ) Used Which Are Made From Poly Urethin Plastic Material Of 48 Mm Diameter. Surfing Pedal Is Of 32Nb Pipe. Knee Chair Handle Frame Is Of 32Nb Pipe. 298Mm Diameter X 9Mm Thick Plate Is Used For Rotating Seating Of Standing Twister With 50Nb Pipe. Closing Caps Made From Best Quality Hdpe / Lldpe Material In Attractive Colors. The Pins Used Are Made Up Of 17Mm Diameter Solid Bar. The Bearing Used Are Of “6203”, “6205”, & “6007” Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Foundation Assembly Are Made From M.S. Pre-Galvanized Material. A17, A24, A34 Circlips Are Used For Assembly. The Footrests Are Made From Casted Aluminum Material, Having Sizes 125Mm X 305Mm X 4Mm Thick. With The Support Of 305Mm X 125Mm X 2.9Mm Thick Ms Plate.It Has Bolting Provision For Mounting On Concrete Slab. Polycarbonate Sheet Is Used For Roof With Supporting Frame Which Is Made From Dia. 25Mm Nb Pipe. Ms 7.8Mm Thick Round Plate Is Used For Splitting Roof Structure From Main Frame. Handle Grips Are Provided Which Is Made Of High Quality Rubber Material. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With Minimum 60 To 70 Micron Thickness.All As Per Eic. , Providing And Installationair Walker- Dimensions: - 1060Mm ( Length ) X 810Mm ( Width ) X 1600Mm. ( Height ) . Safe Area:- 2.0 Meter X 1.8 Meter Air Walker Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. Make Of G.I. Pipe Will Be Of Apollo, Tata, Jindal, Swastik, Zenith Or Siddharth. The Main Frame Pipe Is Of 80Mm Nb Made From “B” Class G.I. Material Which Is Bending At The Radius Of 250Mm. The Sleeve Frame Is Of 100 Od And M.S. Seamless Pipe With Thickness 5Mm. This Sleeve Can Be Easily Disassembled From Main Frame. The Bottom Support Of M.S. Round Plate Of 0250Mm & 10Mm Thick. The Leg Movement Frame Is Of 32Nb Made From “B” Class G.I. Pipe. This Link Is Supported With Ms Flat Of Size 60X8mm. The Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of 0250Mm & 10Mm Thickness And 20Mm X 25Mm M.S. Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipes. Foundation Cover Closing Cap Is Made From Frp Material With 0.7Mm Thickness. Closing Caps Are Made Up Of High Quality Reinforced Plastic Material. A24 Circlips Are Used For Assembly. The Bearings Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand ( Skf / Fag ) . High Tensile Steel Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Is Done By Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 250Mm X 115Mm X 3Mm Thick Ms Plate. To Build Structure Bushes Are Used Which Are Made From M.S. Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect And Pins From Rain And Dust.All As Per Eic. , Providing And Installationshoulder Builder Single – General Information: Product Area: - 2 X 0.9 Mtr Safe Play Area: - 3 X 1.9 Mtr. Technical Specification:- 25 Nb Galvanized Pipe Bend To Form Ring And Spokes Consists Of 20 Nb G.I. Pipes That Connect To Each Other To Form A Wheel Of Shoulder Twirl. This Wheel Is Fixed To 80 Nb Main Support Galvanized Pipe With The Help Of 40 Nb Connector Pipe With Specially Designed Bearing. Bearing Used Are Oil Sealed Self – Lubricated Made By Reputed Company. All Pipes Are Uniformly Powder Coated Up To Minimum 60 Micron Thickness To Avoid Corrosion. All Open Ends Of Pipe Been Closed By Gi / Hdpe Caps For User Safety Against Entrapment. Handle For Rotating The Ring Fixed Over The Pipe Ring.All As Per Eic.All As Per Eic. , Providing And Installationtriple Standingtwister – Dimensions: - 1150Mm ( Length ) X 1150Mm ( Width ) X 1580Mm ( Height ) . Safe Area: - 02.1Mtr. Triple Twister Made From “B” Class G.I. Galvanized ( G.I. ) Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. Make Of G I Pipe Will Be Of Tata, Jindal, Swastik, Zenith Or Siddharth. The Center Pipe Is Of 80Nb Made From “B” Class G.I. Pipe. The Bottom Support Welded Is Of M.S. Round Plate Of 0250Mm & 10Mm Thick. The Standing Frame Is Of 32Nb Made From “B” Class G.I. Pipe. The Handle Frame Of Triple Twister Is Of 25Mm Nb Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb “B” Class Welded With M.S. Round Plate Of 0250Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25 Mm M.S. Angle Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm Thickness. The Standing Plate Is Fitted On The Frame Made Up Of 0 80 Nb Gi. Pipe. M.S. Round Plate Of Size 0300Mm X 10Mm Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Pins Used Are Made Up Of 0 35 Mm Sae 8620 Bright Material. The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand ( Skf / Fag ) . High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. All As Per Eic. , Providing And Installation Cycle New Model- , Area - 1.8 X 0.8 Mtr., Safe Area – 2.8 X 1.8 Mtr.Area - 1.8 X 0.8 Mtr. Safe Area – 2.8 X 1.8 Mtr.Height – 1.10 Mtr. Providing & Fixing Of Cycle Having Its Required Area ( 6’0” X 2’6” ) And Height Of 3’6” Feet. The Wheel Of Cycle Should Be Made By 2” X 2” Square Pipe With Wheel Support Of 2 Nos. Half Round Plate Of Thickness. The Handle & Centre Support Should Be Made By 1’6” X 1’6” Square Pipe & Handle Should Be Made By 25Mm ‘B’ Class Pipe For Balancing The Cycle. The Seating Arrangement Should Be Supported By 5Mm Thick Plate & The Frp Seat Of Size ( 13” X 13” ) To Seat Properly On The Cycle. The Mechanism Of The Paddle Consist Of 2 Nos. 6305 Heavy Duty Bearing Of Reputed Make With Shaft, Solid Bar & Bush For Smooth Operation Of The Cycle.All As Per Eic. , Providing And Installation Of Leg Press Double - Leg Press Double -.*Dimensions: -1840Mm ( Length ) X 360Mm ( Width ) X 1560Mm. ( Height ) .*Safe Area: - 2.8Mtr X 1.4Mtr. *Leg Press Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. *Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth. *Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth. *The Center Pipe Is Of 100Mm Nb Made From “B” Class G.I. Pipe.*The Sleeve Frame Is Of 100 Od And Of M.S. Seamless Pipe With Thickness 5Mm. This Sleeve Can Be Disassembled From Main Frame.*The Bottom Support Of M.S. Round Plate Of 0250Mm & 10Mm Thick.*The Remaining Outer Frame Is Of 32Nb Made From “B” Class G.I. Pipe. *The Foundation Used For Fixing Is Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With 25Mm X 25Mm M.S. Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm Thickness. *Seat & Back Rest Provided Are Made Up Of Ms Deep Draw Quantity Of 2Mm Thickness With No Joint With Uniform Outer Edge Radius 20Mm. *The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate. *The Frame Of Footrests Made Up Of 25Nb “B” Class G.I. Pipe.* Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material.*To Build Structure Bushes Are Used Which Are Made From M.S. Seamless Pipe Of 50Mm O.D. And 5Mm Thickness.*The Pins Used Are Made Up Of 025Mm Sae 8620 Bright Material. *The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand ( Skf / Fag ) .*High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. *The Cerclips Used For Assembly Are Of A24mm.*The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. All As Per Eic. , Providing And Installation Ofarm Pullar Double-Dimesions: - 1900Mm ( Length ) X 740Mm ( Width ) X 1920Mm ( Height ) .Dimesions: - 1900Mm ( Length ) X 740Mm ( Width ) X 1920Mm ( Height ) . Safe Aera: - 1.2Mtr X 3Mtr. Seated Puller Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. Make Of G I Pipe Will Be Of Apollo, Tata, Jindal, Swastik, Zenith Or Siddharth. The Center Pipe Is Of 100Nb Made From “B” Class G.I. Pipe. Bottom Support Is Of M.S. Round Plate Of 0250Mm & 10Mm Thickness Is Welded. All Linkages Are Made Up Of 25Nb “B” Class G.I. Pipe. The Handle Frame Is Of 32Nb “B” Class G.I. Pipe. The Seat Frame Is Of 32Nb “B” Class G.I. Pipe. To Build Structure Bushes Are Used Which Are Made From Seamless Pipe Of 60Mm O.D. And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb “B” Class. Welded With M.S. Round Plate Of 0250Mm & 10Mm Thick. Main Pipe Supported With 25Mm X 25Mm M.S. Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Foundation Cover Closing Cap Is Made From Frp Material. The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330Mm X 300Mm X 2Mm Thickness And Form Radius Of 20 Mm With No Sharp Edges. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. Pins Used Of Diameter 25Mm And 17Mm Are Made Up From Sae 8620 Bright Material. The Bearings Used Are Of “6205Zz” And “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand ( Skf / Fag ) . High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Cerclips Used Of Assembly Are Of A16. The Powder Coating Done With Pure Polyester Powders Of Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness.Dimesions: - 1900Mm ( Length ) X 740Mm ( Width ) X 1920Mm ( Height ) .All As Per Eic. , Providing And Installation Horse Rider- *Dimensions: - 1180Mm ( Length ) X 400Mm ( Width ) X 1400Mm. ( Height ) . *Safe Area: - .2.2Mtr X 1.4Mtr. Horse Rider Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters.* Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth. *The Main Frame Of 100Nb Made From “B” Class G.I. Pipes Welded With M.S. Round Plate Of 0250Mm & 10Mm Thick.*Seat Provided Are Made Up Of Ms Deep Quantity Of 2Mm Thickness With No Joint With Uniform Outer Edge Radius 20Mm.*The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of 0250Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25 Mm M.S. Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness.*The Leg Movement Frame Is Of 32Nb Made From “B” G.I. Pipe. *The Handle Frame Is Of 32Nb From “B” Class G.I. Pipe. *The Footrests Are Made From 25 Nb “B” Class G.I. Pipe.*Pins Used Of Diameter 17Mm Are Made Up From Sae 8620 Bright Material. *High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. *The Circlips Used For Assembly Are Of A24mm. *The Powder Coating Done With Pure Polyester Powders Of Ackzonoble Or Berger With 60 To 70 Micron Thickness.All As Per Eic. , Providing And Installation Ofsurf Board Single - *Dimensions: - 910Mm ( Length ) X 860Mm ( Width ) X 1400Mm. ( Height ) . *Safe Area: - 1.39Mtr X 1.27Mtr. *Surf Board Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. * Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth. *The Center Pipe Is Of 100Mm Nb Made From “B” Class G.I. Pipe. *The Sleeve Pipe Is Of 125Mm Od Seamless Pipe With Thickness Of 5Mm And Bolted To Main Frame With M10 Ss Bolts.*The Bottom Support Welded Of M.S. Plate Of 0250Mm & 10Mm Thickness.*The Handle Frame Is Of 25Nb Made From “B” Class G.I. Pipe.*The Paddle Frame Is Of 25Nb Made From “B” Class G.I. Pipe Is Supported With 70X8mm Bend M.S. Flat And Can Be Replaceable.*The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb “B” Class Welded With M.S. Round Plate Of 0250Mm & 10Mm Thick. Main Pipe Supported With 25Mm X 25Mm M.S. Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness.*Bushes Are Used 70Mm Outer Diameter With 5Mm Thickness Is Used. *The Footrests Made From Aluminum Casting Material Of Size 320Mm X 270Mm X 5Mm.*For Support To Footrest 200Mm X 250Mm With 3Mm Thickness M.S. Plate Used.*Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material.*The Pins Used Are Made Up Of 035Mm Sae8620 Bright Material.*The Bearing Used Are Of “6007Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand ( Skf / Fag ) .*High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly.*The Cerclips Used For Assemble A24.*The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. *The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. All As Per Eic. , Providing And Installationpommel Horse- *Dimesions: - 2150Mm ( Length ) X 800Mm ( Width ) X 800Mm. ( Height ) . *Safe Arae: - 5Mtr X 3.5Mtr. . *Pommel Horse Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters.* Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth.*The Main Frame Of 80 Nb And 50Nb Made From “B” Class G.I. Pipe.*The Handle Frame Is Of 32Nb Made From “B” Class G.I. Pipe.*40Mm X 40Mm Crc Square Pipes Frame Is Placed On The 25Mm X 25Mm X 3Mm M.S. L Angle With 60 X 10 M Thickness Flat Is Used For Support.*Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material.*High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly.*The Powder Coating Is Done With Pure Polyester Powder Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness.All As Per Eic. , Providing And Installation Of Shoulder Builder Double :- General Information: Product Area: - 1.5 X 0.8 Meter Safe Play Area: - 2.5 X 1.8 Meter.Technical Specification: 25 Nb Galvanized Pipe Bend To Form Ring And Spokes Consists Of 20 Nb G.I. Pipes The Connect To Each Other Of Form A Pair Of Wheels Of Forearm Twirt. These Wheels Are Mounted On Both Ends Of 40 Nb G.I. Pipe Bend With Specially Designed Bearing Housings And Shaft Assemblies. This Bend Pipe Is Fixed To Main Frame Of 80 Nb G.I. Pipe. Handle Is Fixed Over The Pipe Ring For Free Movement Of Wheels. All Pipes Are Uniformly Powder Coated Up To Minimum 60 Micron Thickness To Avoid Corrosion. All Open Ends Of Pipe Bend Closed By Gi / Hdpe Caps For User Safety Against Entrapment. Handle For Rotating The Ring Fixed.All As Per Eic. , Providing And Installation Ofcross Trainer- *Dimensions: - 1320Mm ( L ) X 600Mm ( W ) X 1650Mm. ( H ) .*Safe Area: - 2.3 X 1. 6Mtr.*Cross Trainer Equipment Made From “C” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. * Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth. *The Main Frame Pipe Are Ofrectangle Pipe Of Size 90 X 48Mm Pipe & Square Pipe Of 40 X 40Mm .*The Bottom Support Of M.S. Round Plate Of 250Mm & 10Mm Thick.*The Handle Of 32Mm Id Is Used For Fixing A Structure And Made From Center Pipe Of G.I. Of 80Nb “C” Class Welded With M.S. Round Plate Or 0250Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25 Mm M.S. Angles Of 3 Mm Thickness.*To Build Structure Bushes Are Used Which Are Made From Seamless Pipe Of 60Mm Od. With 3Mm Thickness.*The Footrests Are Made From Aluminum Casing Material Of Size 100Mm X 300Mm X 5Mm Thickness And Mounted On M.S. Plate Of Size 130Mm X 310Mm X 3Mm Thick.*Closing Caps Are Made Up Of Lldpe Plastic Material.*Pins Used Of Diameter 25 & 32Mm Are Made Up From Bright Material.*The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand.*High Tensile Galvanized Nuts And Bolts Are Used For Assembly. *The Powder Coating Is Done With Pure Polyester Of Ackzonoble Or Berger Paints With 60 To 70 Micron Assembly.* A 24 Mm Serclips Are Used For Assembly. All As Per Eic. , Providing And Installation Ofknee Chair :- General Information:.Product Area: - 0.9X 0.75 Mtr.Height : 0. 9 Mtr.Safe Play Area: - 1. 9 X 1.75 Mtr.The Center Pipe Is Of 80Mm Idgi Made From “B” Class Gi Pipes. The Ms Round Plate Is Of 250Mm Dia & 10Mm Thick Is Welded At The Bottom. Handle & Bottom Sleeve Made With 25Mm Idgi Pipe. The Back Frame Of Seating & Back Rest Is Of 40Mm Idgi Pipe. The Handle Frame Of Seating Rest 25Mm & Foot Movement Must Be Of 32Mm Id. Bearing Should Be 6205 Of Reputed Make Only. Closing Caps Are Made Up Of High Quality Fiber Reinforce Plastic Material / Ms Round Cap. The Pins Used Are Made Up Of 25Mm. Suitable Rubbers Gripping For Handle & Foot Stand. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Is Done By Pure Polyester Powder Of Berger Paint With 60 To 70 Micron Thickness.All As Per Eic. , Providing And Installationdimensions: - 900 Mm ( L ) X 710Mm ( W ) X 2100Mm. ( H ) . *Safe Area: - 2.0Mtr X 1.7Mtr. *Chest Press Equipment Made Up Of “B” Class G.I. Pipe Of Different Nb.Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. *The Center Pipe Is Of 100Nb Made Up Of “B” Class G.I. Pipe. *The Bottom Welded With Support Of M.S. Round Plate Of 250Mm & 10Mm Thickness. *The Connecting Pipes Are Made Up From 25Nb “B” Class G.I. Pipe. *The Handle Frame Is Made Up From 32Nb “B” Class G.I. Pipe. *To Build Structure Bushes Are Used Which Are Made From M.S. Seamless Pipe Of 60Mm O.D. And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used.* *The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “B” Class Welded With M.S. Round Plate Of 250Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angles Of 3Mm Thickness.*Foundation Cover Closing Cap Is Made From Lldpe Material. *The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 300 Mm X 250 Mm X 2 Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. *Closing ( Bearing ) Caps Are Made Up Of Lldpe Material.*Pins Used Of Diameter 25Mm Are Made Up From Bright Material. *The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand.*High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. *High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly.*The Serclips Used For Locking Is Made Up Of A24 Mm. *The Powder Coating Done With Pure Polyester Powder From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness.All As Per Eic. , Providing Ofmultifunctional Trainer - .Dimensions: - 1900Mm ( Length ) X 600Mm ( Width ) X2200mm ( Height ) . Safe Area: - 3Mtr. X 1.6Mtr.Multifunctional Trainer Equipment Made From “B” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. Make Of G I Pipe Will Be Of Tate, Apollo, Jindal, Swastik, Zenith Or Siddharth. The Main Frame Is 100Nb Made From “B” Class G.I. Pipe. M.S. Round Plated Of 0250Mm & 10Mm Thick Are Welded At Bottom. The Handle Frame Is Of 40Mm X 80Mm Made From Square Pipe. The Bottom Support Of Handle Is Made From 80Mm X 40Mm X 3Mm Thickness Square Crc Pipe. The Foundation Used For Fixing Is Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “B” Class Welded With M.S. Round Plate Of 0250Mm & 10Mm Thick. Main Pipe Supported With 25Mm X 25Mm M.S. Angle Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipe Of 3Mm Thickness. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness.All As Per Eic. , Providing Of Rower : Area: - 1.2 X 1Mtr. Safe Area: - 1.5 X1.5 Mtr. Providing And Fixing Rower Made From “B” Class G.I. Pipe. The Main Frame Is Of 80Mmx40mm & 40Mm X 40Mm Crc Pipe With 2Mm Thickness. The Handle Frame Is Ø 32 Made From “B” Class G.I. Pipe. The Foundation Used For Fixing Costing Of Three Equal Item I.E. Ø 40Mm Made From “B” Class G.I. Pipe, C Channel Of 75Mmx40mmx5mm & 25Mm X25mmx3mm M.S. Angle. To Join The Movement Frame To Main Frame Seamless Pipe Of Ø 50Mm & 3Mm Thickness Is Used. The Seats Which Are Fitted On The Main Frame Is Made Up Of High Quality Frp Material Of Size 330Mm X330mm Of Thickness 3Mm & M.S. Plate Of Size 250Mmx200mmx5mm Is Used To Support It. Closing Caps Are Made From Top Quality Frp Material Which Is Of 2Mm Thickness. The Pins Used Are Made Up Of Ø17mm Hardened Bright Bar. The Bearings Used Are Of “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Make ( Fag / Skf ) The Handles Used Are Of Rubber Grip. High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. The Bushes ( Stopper ) Used To Avoid The Collusion. The Serclips Used For Assembly Is Of Ø 17Mm. The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. All As Per Eic. , Providingsit U.P. Board Single :- Dimensions: - 1820Mm ( Length ) X 430Mm ( Width ) X 580Mm ( Height ) . Safe Area: - 2.8Mtr X 0.6Mtr. Sit Up Board Equipment Made From “B” Class G.I. Pipe Of Diff Errant Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters.Make Of G I Pipe Will Be Of Tata, Jindal, Swastik, Zenith Or Siddharth. The Main Frame Is Of 50Mm Nb Made From “B” Class G.I. Pipe Supported With The Ms Round Plate Of Ø 250X10mm Thickness. Fiber Reinforced Plastic Sheet Of 3Mm Thickness Is Bounded On 25Mm Nb ( G.I. ) “B” Class Pipe Of Main Frame. The Base Support Of The Sit Up Board Is Made 40Nb ( G.I. ) “B” Class Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Nb “B” Class Welded With M.S. Round Plate Of Ø 250 Mm & 10 Mm Thick. Main Pipe Supported With 25 Mm X 25 Mm M.S. Angles Of 3Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. The Powder Coating Is Done With Pure Polyester Powder Ackzonoble Or Berger Paints With 60To70 Micron Thickness. All As Per Eic.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	19-May-2022	Technical Bid Corrigendum	Technical Bid	23-05-2022

INR 500 /-

INR 30000.0 /-

INR 15 Lakhs /-

Name of Work:Supply and fixing various park in open Gym equipment municipal council area Dungarpur

Sl. No.	Item Description
1	Providing and installation ,8 in combination set:- *PRODUCT DIMNSIONS: - D.I.A 4000mm *SAFE WORKOUTAREA: - D.I.A. 5000mm *PRODUCT DIMNSIONS: - D.I.A 4000mm .*SAFE WORKOUTAREA: - D.I.A. 5000mm *Combination made from “B” Class G.I. pipe. The octagonal structure is made up of 100mm NB “B” class GI pipe. Round plate of 250mm diameter & 10mm thickness is welded at bottom of octagonal Structure. The links are made up of 25mm NB “B” class G.I. pipe. The handle and seat frame of seated puller is made from 32mm NB “B” class G.I. pipe. For the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 5mm solid bar is used. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Leg press footrest consists of 25 NB diameter hardened low carbon steel material. The nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50mm diameter. Surfing frame is of 32NB made from “B” Class G.I. pipe. 300mm diameter x 10mm thick plate can be used for rotating sear of seating twister with 50 NB vertical G.I. pipe. Closing caps made from high quality FRP material which is of 2mm thickness. The pints used are made up of 17mm diameter solid bar. The bearing used are of “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pre-galvanized material. A17, A24, A34 circlips are used for assembly. The footrests are made from casted Aluminum material. Having sizes 130mm x 310mm x 5mm thick. With the support of 310mm x 130mm x 3mm thick MS plate. It has Bolting provision for mounting on concrete slab.All as per EIC.
2	Providing and installation 5 in 1 combination (shoulder press+ chest press+ knee chair+ seating and standing twister) • PRODUCT DIMENSIONS: - 2410mm (Length) x 1720mm (Width) x 2350mm (Height). • SAFE WORKOUT AREA: - 4500mm (Length) x 4500mm (Width). Combination made from “B” Class G.I. pipe. The center pipe is of 100mm NB pipe. Round plate of 248 mm diameter & 9mm thickness is welded at bottom. The links are made up of 25mm NB pipe. The handle and seat frame of shoulder press is made from 32mm NB pipe. For the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 50mm solid bar is used. Chest press frame is of 32mm NB pipe. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300 mmX1.8mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The chest press footrest consists of 25 NB pipe. The pins used in are made up of F25 mm, F35mm & F45mm bright material. The Nut Bolts used for assembly are made from height tensile steel with galvanized material. The bushes (stopper) used which are made from Poly Urethin Plastic material of 48 mm diameter. Surfing pedal is of 32NB pipe. Knee chair handle frame is of 32NB pipe. 298mm diameter x 9mm thick plate is used for rotating seating of standing twister with 50NB pipe. Closing caps made from best quality HDPE/LLDPE material in attractive colors. The pins used are made up of 17mm diameter solid bar. The bearing used are of “6203”, “6205”, & “6007” permanent lubricated sealed bearing of reputed make. The nut bolts used for foundation assembly are made from M.S. pre-galvanized material. A17, A24, A34 circlips are used for assembly. The footrests are made from casted Aluminum material, having sizes 125mm X 305mm X 4mm thick. With the support of 305mm X 125mm X 2.9mm thick MS plate.It has Bolting provision for mounting on concrete slab. Polycarbonate sheet is used for roof with supporting frame which is made from Dia. 25mm NB pipe. MS 7.8mm thick round plate is used for splitting roof structure from main frame. Handle grips are provided which is made of high quality rubber material. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness.All as per EIC.
3	Providing and installationAir Walker- DIMENSIONS: - 1060mm (Length) x 810mm (Width) x 1600mm. (Height). SAFE AREA:- 2.0 Meter x 1.8 Meter Air Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G.I. Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bending at the radius of 250mm. The Sleeve frame is of 100 OD and M.S. Seamless Pipe with thickness 5mm. This sleeve can be easily disassembled from main frame. The bottom support of M.S. round plate of 0250mm & 10mm thick. The leg movement frame is of 32NB made from “B” Class G.I. pipe. This link is supported with MS flat of size 60X8mm. The handle frame is of 25NB made from “B” Class G.I. Pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class welded with M.S. round plate of 0250mm & 10mm thickness and 20mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes. Foundation cover Closing Cap is made from FRP Material with 0.7mm thickness. Closing Caps are made up of high quality reinforced Plastic material. A24 circlips are used for assembly. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. To build structure bushes are used which are made from M.S. made of SS 304 used on nylon cap mounted on pins to protect and pins from rain and dust.All as per EIC.
4	Providing and installationSHOULDER BUILDER SINGLE – General Information: Product Area: - 2 X 0.9 mtr Safe Play Area: - 3 X 1.9 mtr. Technical Specification:- 25 NB Galvanized pipe bend to form ring and spokes consists of 20 NB G.I. pipes that connect to each other to form a wheel of SHOULDER TWIRL. This wheel is fixed to 80 NB main support galvanized pipe with the help of 40 NB connector pipe with specially designed bearing. Bearing used are oil sealed self – lubricated made by reputed company. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI /HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring.All as per EIC.All as per EIC.
5	Providing and installationTRIPLE STANDINGTWISTER – DIMENSIONS: - 1150mm (Length) x 1150mm (Width) x 1580mm (Height). SAFE AREA: - 02.1Mtr. Triple Twister made from “B” Class G.I. Galvanized (G.I.) Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The Center Pipe is of 80NB made from “B” Class G.I. pipe. The bottom support welded is of M.S. round plate of 0250mm & 10mm thick. The standing frame is of 32NB made from “B” Class G.I. pipe. The handle frame of triple twister is of 25mm NB made from “B” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. The standing plate is fitted on the frame made up of 0 80 NB GI. Pipe. M.S. Round Plate of size 0300mm x 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of 0 35 mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. All as per EIC.
6	Providing and installation CYCLE NEW MODEL- ,Area - 1.8 x 0.8 mtr.,Safe Area – 2.8 x 1.8 mtr.Area - 1.8 x 0.8 mtr. Safe Area – 2.8 x 1.8 mtr.Height – 1.10 mtr. Providing & fixing of Cycle having its required Area (6’0” x 2’6”) and height of 3’6” Feet. The wheel of cycle should be made by 2” x 2” square pipe with wheel support of 2 nos. half round plate of thickness. The Handle & Centre support should be made by 1’6” x 1’6” Square pipe & handle should be made by 25mm ‘B’ class pipe for balancing the cycle. The seating arrangement should be supported by 5mm thick plate & the FRP seat of size (13” x 13”) to seat properly on the cycle. The mechanism of the paddle consist of 2 nos. 6305 heavy duty bearing of reputed make with shaft, solid bar & bush for smooth operation of the cycle.All as per EIC.
7	Providing and installation of LEG PRESS DOUBLE - LEG PRESS DOUBLE -.*DIMENSIONS: -1840mm (Length) x 360mm (Width) x 1560mm. (Height).*SAFE AREA: - 2.8Mtr x 1.4Mtr. *Leg press equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100mm NB made from “B” Class G.I. pipe.*The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame.*The bottom support of M.S. round plate of 0250mm & 10mm thick.*The remaining outer frame is of 32NB made from “B” Class G.I. pipe. *The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “B” Class welded with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. *Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. *The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. *The frame of footrests made up of 25NB “B” Class G.I. pipe.* Closing Caps are made up of high quality Fiber reinforced Plastic material.*To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness.*The pins used are made up of 025mm SAE 8620 bright material. *The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand (SKF/FAG).*High tensile steel with galvanized nut bolts are used for assembly. *The cerclips used for assembly are of A24mm.*The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. All as per EIC.
8	Providing and installation ofARM PULLAR DOUBLE-DIMESIONS: - 1900mm (Length) x 740mm (Width) x 1920mm (Height).DIMESIONS: - 1900mm (Length) x 740mm (Width) x 1920mm (Height). SAFE AERA: - 1.2Mtr x 3Mtr. Seated puller equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NB made from “B” Class G.I. pipe. Bottom support is of M.s. round plate of 0250mm & 10mm thickness is welded. All linkages are made up of 25NB “B” Class G.I. pipe. The handle frame is of 32NB “B” Class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe. To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and form radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. The bearings used are of “6205zz” and “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used of assembly are of A16. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.DIMESIONS: - 1900mm (Length) x 740mm (Width) x 1920mm (Height).All as per EIC.
9	Providing and installation HORSE RIDER- *DIMENSIONS: - 1180mm (Length) x 400mm (width) x 1400mm. (Height). *SAFE AREA: - .2.2Mtr X 1.4Mtr. Horse rider equipment made from “B” Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.* Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The main frame of 100NB made from “B” Class G.I. pipes welded with M.S. round plate of 0250mm & 10mm thick.*Seat provided are made up of MS deep quantity of 2mm thickness with no joint with uniform outer edge radius 20mm.*The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25 mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.*The leg movement frame is of 32NB made from “B” G.I. pipe. *The handle frame is of 32NB from “B” Class G.I. pipe. *The footrests are made from 25 NB “B” class G.I. pipe.*Pins used of Diameter 17mm are made up from SAE 8620 bright material. *High tensile steel with galvanized nuts & bolts are used for assembly. *The circlips used for assembly are of A24mm. *The powder coating done with Pure Polyester powders of Ackzonoble or Berger with 60 to 70 micron thickness.All as per EIC.
10	Providing and installation ofSURF BOARD SINGLE - *DIMENSIONS: - 910mm (Length) x 860mm (Width) x 1400mm. (Height). *Safe Area: - 1.39Mtr x 1.27Mtr. *Surf Board Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. * Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100mm NB made from “B” class G.I. pipe. *The sleeve pipe is of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 SS bolts.*The bottom support welded of M.S. plate of 0250mm & 10mm thickness.*The handle frame is of 25NB made from “B” class G.I. pipe.*The paddle frame is of 25NB made from “B” Class G.I. pipe is supported with 70x8mm bend M.S. flat and can be replaceable.*The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.*Bushes are used 70mm Outer Diameter with 5mm thickness is used. *The footrests made from Aluminum casting material of size 320mm x 270mm x 5mm.*For support to footrest 200mm x 250mm with 3mm thickness M.S. Plate used.*Closing Caps are made up of high quality Fiber reinforced Plastic material.*The pins used are made up of 035mm SAE8620 bright material.*The bearing used are of “6007zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG).*High tensile steel with galvanized nut bolts are used for assembly.*The cerclips used for assemble A24.*The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. *The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. All as per EIC.
11	Providing and installationPOMMEL HORSE- *DIMESIONS: - 2150mm (Length) x 800mm (Width) x 800mm. (Height). *SAFE ARAE: - 5Mtr x 3.5Mtr. . *Pommel horse equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.* Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth.*The main frame of 80 NB and 50NB made from “B” Class G.I. pipe.*The handle frame is of 32NB made from “B” Class G.I. pipe.*40mm x 40mm CRC square pipes frame is placed on the 25mm x 25mm x 3mm M.S. L Angle with 60 x 10 m thickness flat is used for support.*Closing Caps are made up of high quality Fiber reinforced Plastic material.*High tensile steel with galvanized nuts and bolts are used for assembly.*The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness.All as per EIC.
12	Providing and installation of SHOULDER BUILDER DOUBLE :- General Information: Product Area: - 1.5 X 0.8 meter Safe Play Area: - 2.5 X 1.8 meter.Technical Specification: 25 NB Galvanized pipe bend to form ring and spokes consists of 20 NB G.I. pipes the connect to each other of form a pair of wheels of FOREARM TWIRT. These wheels are mounted on both ends of 40 NB G.I. pipe bend with specially designed bearing housings and shaft assemblies. This bend pipe is fixed to main frame of 80 NB G.I. pipe. Handle is fixed over the pipe ring for free movement of wheels. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe bend closed by GI/HDPE caps for user safety against entrapment. Handle for rotating the ring fixed.All as per EIC.
13	Providing and installation ofCROSS TRAINER- *DIMENSIONS: - 1320mm (L) x 600mm (W) x 1650mm. (H).*SAFE AREA: - 2.3 x 1. 6Mtr.*Cross trainer equipment made from “C” Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. * Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The main frame Pipe are ofRectangle Pipe of size 90 x 48mm Pipe & square pipe of 40 x 40mm .*The bottom support of M.S. round plate of 250mm & 10mm thick.*The Handle of 32mm ID is used for fixing a structure and made from center pipe of G.I. of 80NB “C” class welded with M.S. round plate or 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angles of 3 mm thickness.*To build structure bushes are used which are made from seamless pipe of 60mm OD. With 3mm thickness.*The footrests are made from Aluminum casing material of size 100mm X 300mm X 5mm thickness and mounted on M.S. Plate of Size 130mm x 310mm x 3mm thick.*Closing Caps are made up of LLDPE Plastic material.*Pins used of Diameter 25 & 32mm are made up from bright Material.*The Bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand.*High tensile galvanized nuts and bolts are used for assembly. *The powder coating is done with Pure Polyester of Ackzonoble or Berger Paints with 60 to 70 Micron assembly.* A 24 mm serclips are used for assembly. All as per EIC.
14	Providing and installation ofKnee Chair :- General Information:.Product Area: - 0.9X 0.75 mtr.Height : 0. 9 Mtr.Safe Play Area: - 1. 9 x 1.75 mtr.The center pipe is of 80mm IDGI made from “B” class GI pipes. the MS Round plate is of 250mm DIA & 10mm thick is welded at the bottom. Handle & Bottom sleeve made with 25mm IDGI pipe. The Back frame of seating & back rest is of 40mm IDGI pipe. The handle frame of seating rest 25mm & foot movement must be of 32mm ID. Bearing should be 6205 of reputed make only. Closing caps are made up of high quality fiber reinforce plastic material / MS round cap. The pins used are made up of 25mm. Suitable rubbers gripping for handle & foot stand. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done by pure polyester powder of Berger paint with 60 to 70 micron thickness.All as per EIC.
15	Providing and installationDIMENSIONS: - 900 mm (L) x 710mm (W) x 2100mm. (H). *SAFE AREA: - 2.0Mtr x 1.7Mtr. *Chest press equipment made up of “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *The center pipe is of 100NB made up of “B” Class G.I. pipe. *The bottom welded with support of M.S. round plate of 250mm & 10mm thickness. *The connecting pipes are made up from 25NB “B” Class G.I. pipe. *The handle frame is made up from 32NB “B” Class G.I. pipe. *To build structure bushes are used which are made from M.S. seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used.* *The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” Class Welded with M.S. round plate of 250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness.*Foundation cover Closing Cap is made from LLDPE Material. *The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 300 mm X 250 mm X 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. *Closing (Bearing) Caps are made up of LLDPE material.*Pins used of Diameter 25mm are made up from bright material. *The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand.*High tensile steel with galvanized nuts & bolts are used for assembly. *High tensile steel with galvanized nuts & bolts are used for assembly.*The serclips used for locking is made up of A24 mm. *The powder coating done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness.All as per EIC.
16	Providing ofMultifunctional Trainer - .DIMENSIONS: - 1900mm (Length) x 600mm (Width) x2200mm (Height). SAFE AREA: - 3Mtr. X 1.6Mtr.Multifunctional Trainer equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The main frame is 100NB made from “B” Class G.I. pipe. M.S. round plated of 0250mm & 10mm thick are welded at bottom. The handle frame is of 40mm x 80mm made from square pipe. The bottom support of handle is made from 80mm x 40mm x 3mm thickness square CRC pipe. The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness.All as per EIC.
17	Providing of Rower : Area: - 1.2 X 1mtr. Safe Area: - 1.5 X1.5 mtr. Providing and fixing rower made from “B” class G.I. pipe. The main frame is of 80mmX40mm & 40mm X 40mm CRC pipe with 2mm thickness. The handle frame is ø 32 made from “B” class G.I. pipe. The foundation used for fixing costing of three equal item i.e. ø 40mm made from “B” class G.I. pipe, c channel of 75mmX40mmX5mm & 25mm X25mmX3mm M.S. angle. To join the movement frame to main frame seamless pipe of ø 50mm & 3mm thickness is used. The seats which are fitted on the main frame is made up of high quality FRP material of size 330mm X330mm of thickness 3mm & M.S. plate of size 250mmX200mmX5mm is used to support it. Closing caps are made from top quality FRP material which is of 2mm thickness. The pins used are made up of ø17mm hardened bright bar. The bearings used are of “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF) the handles used are of rubber grip. High tensile steel with galvanized nut bolts are used for assembly. The bushes (Stopper) used to avoid the collusion. The serclips used for assembly is of ø 17mm. the powder coat is done by poly urethane & epoxy powder with 60 to 70 micron thickness. All as per EIC.
18	ProvidingSit U.p. Board Single :- DIMENSIONS: - 1820mm (Length) x 430mm (Width) x 580mm (Height). SAFE AREA: - 2.8Mtr x 0.6Mtr. Sit up Board Equipment made from “B” Class G.I. pipe of diff errant NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The main frame is of 50mm NB made from “B” Class G.I. pipe supported with the MS round plate of Ø 250x10mm thickness. Fiber reinforced Plastic sheet of 3mm thickness is bounded on 25mm NB (G.I.) “B” class pipe of main frame. The base support of the sit up board is made 40NB (G.I.) “B” class pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class Welded with M.S. round plate of Ø 250 mm & 10 mm thick. Main pipe supported with 25 mm X 25 mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60to70 micron thickness. All as per EIC.