|
| 1 | Dismantling of sttructural mild steel work of any description and in any positioncomplete all as specified and directed. |
| 2 | Taking down Barbed wire any description and in any position, complete all as specified and directed. |
| 3 | Demolition of brick masonry or stone masonary built in cement mortar includingallquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified and directed. |
| 4 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Excavating over areas, exc 1.5 m but n exc 3.0 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 6 | M&L forPlain cement concrete (1:4:8), type D-2, using 40mm graded stone aggregate as infoundation, filling and mass concrete,complete all as specified and directed. |
| 7 | M&L for MSTMT bars Fe 500D 10mm dia and over. Cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | M&L for Use and waste of form work to sides of concrete foundations, footing, bases of columns, raft beams, sides and soffits of plinth beams and similiar works, vertial or to betteretccomplete all as specified and directed. |
| 9 | M&L for Formwork fair finished flat surface of concrete to face of walls, retaining wall, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses etc vertical or to better complete all as specified and as directed. |
| 10 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in foundations including rafts, column footings, foundation beam, plinth beams, bases for column, basement slab, under reamed pile and mass concrete etc complete all as specified and as directed |
| 11 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in wall, retaining wall, basement wall, ballast walls and like, of any thickness, above the footing including attached pillasters and buttresses complete all as specified and as directed |
| 12 | M&L for 110 mm dia PVC (SWR) soil, waste and vent pipe, single socketed in any length wirh rubber joit laid in trench,floor, weep holes complete all as specified and directed. |
| 13 | M&L for Boulder filling dry, handpacked tightly, as in wire crate apron bundscomplete all as specified and directed.Note : Wire crate shall be measured and paid separately. |
| 14 | M&L for 4mm dia galvanised steel wire, 150x100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed. |
| 15 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depthwith approved and available soil, complete all as specified and directed. |
| 16 | Removal excavated material to distance exceeding 1.5 Km but n exc 5.0 Km and depositing where directed at level complete all as specified and directed. |
| 17 | S&F structural steel works in framed work such as grills, grating, framed guard bars, ladder etc with ends of bars shouldered and or riveted or forged in spike and similar work confirming to Fe-410 W, Gde E-250 complete all as specified and directed. |
| 18 | M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 19 | M & L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed. |
| 20 | Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement based primer complete all as specified and directed. |
| 21 | M&L for Hardcore with Broken stone or boulders of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 22 | M&L for 75 mm thick Cement Conrete (between wall and drain) in 1:3:6 type C–2 using 40mm graded stone aggregates in sub base of flooring/ hard standing/paving/plinth protection finished even and smooth with using extra cement including making joints at 3.00 Metre interval, complete all as specified and directed. |
| 23 | M&L for Galvanised, 2 strand, steel barbed wire 2.24mm diabarbed with 2mm dia at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etccomplete all as specified an directed. |
| 24 | S&F hot dipped galvanised cocertina razer tape coil 730 mm dia, spring steel high tensile centre core wire 2.5 mm dia having 200-250 gm zinc coating, 0-5 mm thick razer sheet having 90-120gm, zinc coating & min 10 mm width (before wraping centre core wire), with GI clip 1.6 mm thickcomplete all as specified an directed. |
| 25 | Demolition of un-reinforced cement concrete in paving n exc 15 cm thickness of any description and in any position not otherwise specifically provided for, complete all as specified. |
| 26 | Removing debris to a distance of 5 KM including loading,unloading and dumping, levelling at the destination, complete all as specified and directed. |
| 27 | S & F structural steel work in framed work such as hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410W, Gde E-250 complete all as specified and directed. |
| 28 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. . |
| 29 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for foundation etc and getting out in soft/loose soil, complete all as specified and directed. |
| 30 | M&L Brick work with sub class \"B\" Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed. |
| 31 | M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm gradedstone aggregate) in surface channels and drains complete all as specified and directed. |
| 32 | Net Contract Sum will be after deducting Sch of Credit of Rs 10,26,668.00 |
