Supplying Of 4 Wheeler Auto Tippers For Kamatagi Tp Supplying Of 4 Wheeler Auto Tippers For Kamatagi Tp , Supplying Of Tyiers With Tube Mrf Brand,1) Type Of Fuel: Diesel, 2) Vehicle Emission Complaince: Bs-Vi, 3) Max Engine Power Bhp 16 (Bhp@Rpm), 4) Type-Karnataka

Supplying Of 4 Wheeler Auto Tippers For Kamatagi Tp Supplying Of 4 Wheeler Auto Tippers For Kamatagi Tp , Supplying Of Tyiers With Tube Mrf Brand,1) Type Of Fuel: Diesel, 2) Vehicle Emission Complaince: Bs-Vi, 3) Max Engine Power Bhp 16 (Bhp@Rpm), 4) Type Of Tipper: Tipper Body Should Be From Original Equipment Manufacturer. Garbage Tipper 2 Cu.M Fully Company Built-Up Closed Box Tipper Bs-Vi With Hard Top Cover & Dry Wet Partition, Front Engine, Pto Driven Hydraulic Tipping System,Parabolic Leaf Spring Suspension With 2 Nos. Double Acting Telescopic Hydraulicshock Absorbers At Front And Rear, Body Floor Thickness Of 2Mm And Body Side Panel Thickness Of 1.6Mm 5) Main Engine Capacity (Cc): 702 6) Type Of Chassis Frame : Ladder Type Frame With Inverted Hat Section Long Members 7) Category Of Vehicle For Which Chassis To Be Used: Light Capacity Commercial Vehicles, 8) Max Engine Torque: 39 (Nm@Rpm) 9) Main Engine Aspiration : Natural Aspiration 10) No. Of Cylinder In Main Engine: 2 (Nos) 11) Gradeability Of Vehicle With Load( %): 16.38% 12) Gradeability Of Vehicle Without Load : 18%, 13) Wheel Base (Mm) : 2100 Millimeter 15) Kerb Weight (Kg): Kilogram 16) Gross Vehicle Weight (Kg): 1700 Kilogram, 17) No Of Axle (Nos): 2 Nos, 18) Ground Clearance (Mm): 160 Millimeter 19) Axle Configuration (Number Of Outside Tyre X Number Of Driving Tyre): 4X2, 20) Type Of Front Axle And Suspension:Independent Suspension With Coil Spring Wize 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers At Front, 20) Type Of Rear Axle And Suspension System: Salisbury Type Rigid Axle With Semi-Elliptical Leaf Springs And 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers, 21) Type Of Bis Marked Vehicle Tyre: Radial, 22) Chassis Transmission System: Manual, 23) Number Of Speed/ Forward Gears: 4, 24) Type Of Steering: Manual, 25) Turning Radius,Min (Mm):4300 Millimeter, 26) Speed Governers: If Applicable To Be Supplied, 27) Abs Fitted:If Applicable To Be Supplied, 28)Front Vehicle Brake: Disc Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels With Automatic Wear Adjusters 29) Rear Vehicle Brake: Drum Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels 30) Tipping Angle (Degree): Max 48, 31) Tipper Container 32) Capacity/Volume(Cubic Metres): 2 33) Length Of Chassis (Mm): 3800 Millimeter 34) Width Of Chassis (Mm): 1500 Millimeter 35) Height Of Chassis (Mm):1845 Millimeter 36) Tipper Body Pivot :1546 Millimeter: 37) Overall Height Of Tipper From Ground (Mm): 1489 Millimeter 38) Body Plate Thickness (Mm): 16, 39) Main Frame Thickness (Mm) : 3 Millimeter 40) Tipping Hydraulic Cylinders(Make): Canara/Dantal/Wipro/Vickers/Ut Or Equivalent Reputed Make, 41) Hydraulic System Driven By: Main Engine, 42)Tipper Container Material: Mild Steel 43) Thickness Of Sheet From Tipper Collector Container Made (Mm), 44) 1.6 Millimeter, 45) Dumping Height (Mm): Max 352 Millimeter, 46) Inner Surface Body Coating: Anti Carrosive/Rust Coating 47) Waranty: 5 Years Waranty Including Pump, Gear Box, 48) D Attachable Partian Wall Should Be Fixed And With Maic Set And Two Tyre Extra Cuplings, Rams,Seals And Countroling Units Waranty Servises Should Be Of Within 7 Days If It Is More Than 7 Days Liqudate Damages Will Be Collected. With All Taxes

INR 500 /-

INR 32000.0 /-

INR 15.98 Lakhs /-