Paschimanchal Vidyut Vitran Nigam Limited has published Development Of Distribution Infrastructure For Loss Reduction Works Atdistrict Ghaziabad And G B Nagar Of Uttar Pradesh Under Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme- 1 Armouredlt Cabling In High Loss Area ( Lt Line On 3.. Submission Date for this Tender is 22-08-2022. Bolts Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 19-May-2022 | Corrigendum-1 | Technical Bid | 14-06-2022 |
2 | 01-Jun-2022 | Corrigendum-2 | Technical Bid | 14-06-2022 |
3 | 06-Jun-2022 | dateext | Date | 21-06-2022 |
4 | 16-Jun-2022 | Corrigendum-3 | Technical Bid | 21-06-2022 |
5 | 18-Jun-2022 | Corrigendum-4 | Technical Bid | 21-06-2022 |
6 | 20-Jun-2022 | dateext2 | Date | 06-07-2022 |
7 | 05-Jul-2022 | dateext3 | Date | 26-07-2022 |
8 | 22-Jul-2022 | dateext4 | Date | 22-08-2022 |
Sl. No. | Item Description |
1 | ArmouredLT cabling in high loss area (LT line on 3.5Cx 50 sq.mm armoured cable) |
2 | PCC Pole, 8.5 Mtr. Long |
3 | Bolts and Nuts for Shackle Insulators |
4 | LT Shakle Insulator 100x115 mm |
5 | D-Straps |
6 | LT XLPE armoured 3.5x50 Sq. mm. Cable |
7 | Mid Span Jointing Sleeves (50 sq. mm) |
8 | Insulating Piercing Connector (50-150 sq.mm) |
9 | Insulation mastic tape (2inc X 10 feet). |
10 | supply of Three Phase Deep Drawn Distribution Box with clamps and suitable lock and key arrangment |
11 | supply of Single of Phase Deep Drawn Distribution Box with clamps and suitable lock and key arrangment |
12 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
13 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
14 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
15 | GI Wire 6 SWG |
16 | LT Stay Set (16 x 1800 mm) |
17 | LT Stay Clamp with nut and bolt |
18 | Stay Wire 7/10 SWG |
19 | LT Stay Insulator |
20 | Stone Pad (300x300x75mm) |
21 | LT clamp with nut and bolt for PCC pole |
22 | Angle for vertical Arm L50X50X6(Type-A) |
23 | Angle for vertical Arm L50X50X6(Type-B) |
24 | Top clamp for Vertical arm( Type-A) |
25 | Top clamp for Vertical arm( Type-B) |
26 | Bottom clamp for vertical arm (Type-A) |
27 | Bottom clamp for vertical arm (Type-B) |
28 | Armouredconsumer cabling in high loss area (Service line on single phase 2Cx 6 sq.mm) |
29 | PVC 2C x 6 sq.mm. Armoured Cable for Service Connection |
30 | Polycarbonated box for single phase consumer |
31 | Armouredcomsumer cabling in high loss area (Service line on three phase 4Cx 16 sq.mm) |
32 | PVC 4C x 16 sq.mm. Armoured Cable for Service Connection |
33 | Polycarbonated box for three phase consumer |
34 | Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables(3x50+1x35+1x16) sq.mm. |
35 | PCC Pole, 8.5 Mtr. Long |
36 | Stone Pad (300x300x75mm) |
37 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
38 | GI Wire 6 SWG |
39 | LT Stay Set (16 x 1800 mm) |
40 | LT Stay Clamp with nut and bolt |
41 | Stay Wire 7/10 SWG |
42 | LT Stay Insulator |
43 | Dead End clamps with I-Hook (Insulated) |
44 | Suspension Clamp with I-Hook |
45 | Pole clamps with nut and bolt |
46 | Holding clamp for round pole with nut and bolt |
47 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
48 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
49 | Supply ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
50 | LT ABC of 3x50+1x35+1x16 sq. mm |
51 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
52 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
53 | End cap for LT AB cable |
54 | PG Clamps |
55 | Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x95+1x70+1x16) sq.mm. |
56 | PCC Pole, 8.5 Mtr. Long |
57 | Stone Pad (300x300x75mm) |
58 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
59 | GI Wire 6 SWG |
60 | LT Stay Set (16 x 1800 mm) |
61 | LT Stay Clamp with nut and bolt |
62 | Stay Wire 7/10 SWG |
63 | LT Stay Insulator |
64 | Dead End clamps with I-Hook (Insulated) |
65 | Suspension Clamp with I-Hook |
66 | Pole clamps with nut and bolt |
67 | Holding clamp for round pole with nut and bolt |
68 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
69 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
70 | Supply ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
71 | LT ABC of 3x95+1x70+1x16 sq. mm |
72 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
73 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
74 | End cap for LT AB cable |
75 | PG Clamps |
76 | Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x120+1x95+1x16) sq.mm. |
77 | PCC Pole, 8.5 Mtr. Long |
78 | Stone pad (300x300x75mm) |
79 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
80 | GI Wire 6 SWG |
81 | LT Stay Set (16 x 1800 mm) |
82 | LT Stay Clamp with nut and bolt |
83 | Stay Wire 7/10 SWG |
84 | LT Stay Insulator |
85 | Dead End clamps with I-Hook (Insulated) |
86 | Suspension Clamp with I-Hook |
87 | Pole clamps with nut and bolt |
88 | Holding clamp for round pole with nut and bolt |
89 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
90 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
91 | Supply ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
92 | LT ABC of 3x120+1x95+1x16 sq. mm |
93 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
94 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
95 | End cap for LT AB cable |
96 | PG Clamps |
97 | Feeder bifurcation (11 KV line) |
98 | 11kV New Line on 11 Mtr. ST Pole with ACSR DOG Conductor (Feeder bifurcation 11 KV Line) |
99 | 11 KV Polymer Disc Insulator B&S type 70 KN |
100 | Disc Fitting B&S type 70 KN |
101 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
102 | 11kV SMC Danger Board with clamp, bolts & nuts |
103 | 11kV SMC Number Plate for clamp with N&B |
104 | 11 KV Stay Set (16 x 1800 mm) |
105 | 11 KV Stay Clamp with nut and bolt |
106 | Stay Wire 7/10 SWG |
107 | 11 KV Stay Insulator |
108 | ACSR Dog Conductor |
109 | P.G. Clamp for ACSR Dog/Raccoon |
110 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
111 | 11 Mtr. STP |
112 | 13 Mtr. STP |
113 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
114 | Aluminium Binding Wire - 6 SWG |
115 | Aluminium Jointing Sleeves |
116 | G.I. Barbed Wire |
117 | GI Wire 6 SWG |
118 | GI Wire 8 SWG |
119 | GI Wire 16 SWG |
120 | Eye Bolt |
121 | Turn Buckle |
122 | Red Oxide Paint |
123 | Aluminium Paint |
124 | 11kV "E" Bracket with N&B |
125 | 11kV `F" Bracket with N&B |
126 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
127 | GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer |
128 | GI Top Channel 125x65x6, 1525 mm long with clamp, bolts, nuts and washers |
129 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
130 | Cross arm holding Clamp with nuts & bolts |
131 | V-Type Cross arm for 11KV Line, 100x50x6 mm, GI |
132 | Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc. |
133 | GI guarding Angle Iron 75x75x6 mm 3010 mm long |
134 | Stone Pad (300x300x75mm) |
135 | 11kV New Line on 8.5 Mtr. PCC Pole with ACSR DOG Conductor |
136 | 11 KV Polymer Disc Insulator B&S type 70 KN |
137 | Disc Fitting B&S type 70 KN |
138 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
139 | 11kV SMC Danger Board with clamp, bolts & nuts |
140 | 11kV SMC Number Plate for clamp with N&B |
141 | 11 KV Stay Set (16 x 1800 mm) |
142 | 11 KV Stay Clamp with nut and bolt |
143 | Stay Wire 7/10 SWG |
144 | 11 KV Stay Insulator |
145 | ACSR Dog Conductor |
146 | P.G. Clamp for ACSR Dog/Raccoon |
147 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
148 | PCC Pole, 8.5 Mtr. Long |
149 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
150 | Aluminium Binding Wire - 6 SWG |
151 | Aluminium Jointing Sleeves |
152 | G.I. Barbed Wire |
153 | GI Wire 6 SWG |
154 | GI Wire 8 SWG |
155 | GI Wire 16 SWG |
156 | Eye Bolt |
157 | Turn Buckle |
158 | 11kV "E" Bracket with N&B |
159 | 11kV `F" Bracket with N&B |
160 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
161 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
162 | Cross arm holding Clamp with nuts & bolts |
163 | V-Type Cross arm for 11KV Line, 100x50x6 mm, GI |
164 | Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc. |
165 | GI guarding Angle Iron 75x75x6 mm 3010 mm long |
166 | Stone Pad (300x300x75mm) |
167 | GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer |
168 | 11 KV Railway Crossing |
169 | 11kV 3x185 mm2XLPE Cable |
170 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
171 | HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing) |
172 | Cable Route Marker |
173 | G.I. Pipe 6" dia . |
174 | 11 Mtr. STP |
175 | Stone Pad (300x300x75mm) |
176 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
177 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
178 | 11 KV Polymer Disc Insulator B&S type 70 KN |
179 | Disc Fitting B&S type 70 KN |
180 | P.G. Clamp for ACSR Dog/Raccoon |
181 | 11kV SMC Number Plate for clamp with N&B |
182 | 11kV SMC Danger Board with clamp, bolts & nuts |
183 | G.I. Barbed Wire |
184 | Aluminium Binding Wire - 6 SWG |
185 | Aluminium Paint |
186 | Red Oxide Paint |
187 | 11 KVStay Set (16 x 1800 mm) |
188 | 11 KV Stay Clamp with nut and bolt |
189 | Stay Wire 7/10 SWG |
190 | 11 KV Stay Insulator |
191 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
192 | GI Wire 6 SWG |
193 | NHAI/State Highway Crossing |
194 | 11kV 3x185 mm2XLPE Cable |
195 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
196 | HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing) |
197 | Cable Route Marker |
198 | G.I. Pipe 6" dia . |
199 | 11 Mtr. STP |
200 | Stone Pad (300x300x75mm) |
201 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
202 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
203 | 11 KV Polymer Disc Insulator B&S type 70 KN |
204 | Disc Fitting B&S type 70 KN |
205 | P.G. Clamp for ACSR Dog/Raccoon |
206 | 11kV SMC Number Plate for clamp with N&B |
207 | 11kV SMC Danger Board with clamp, bolts & nuts |
208 | G.I. Barbed Wire |
209 | Aluminium Binding Wire - 6 SWG |
210 | Aluminium Paint |
211 | Red Oxide Paint |
212 | 11 KV Stay Set (16 x 1800 mm) |
213 | 11 KV Stay Clamp with nut and bolt |
214 | Stay Wire 7/10 SWG |
215 | 11 KV Stay Insulator |
216 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
217 | GI Wire 6 SWG |
218 | Augumentation/ Reconductoring of 33 KV overhead line with Dog conductor |
219 | ACSR Dog Conductor |
220 | PCC Pole, 9.0 Mtr. Long |
221 | 11 Mtr. STP |
222 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
223 | GI Wire 6 SWG |
224 | 33 KV Composite Polymer Pin Insulator with Nut and washers |
225 | Aluminium Paint |
226 | Red Oxide Paint |
227 | 33kV SMC Danger board with clamp and N&B |
228 | 33kV SMC Number plate with clampand N&B |
229 | Stone Pad (300x300x75mm) |
230 | G.I. Barbed Wire |
231 | 33kV "E" Bracket with N&B |
232 | 33kV "F" Bracket with N&B |
233 | V-Type Cross Arm for 33KV line 100x50x6 mm, GI |
234 | Cross arm holding Clamp with nuts & bolts |
235 | 33 KV Polymer Disc Insulator B&S type 70 KN |
236 | Disc Fitting B&S type 70 KN |
237 | 33 KV Stay Set |
238 | 33 KV Stay Clamp with nut and bolt |
239 | Stay Wire 7/8 SWG |
240 | 33 KV Stay Insulator |
241 | Augmentation/Reconductoring of 11kV overhead Linewith ACSR DOG Conductor |
242 | ACSR Dog Conductor |
243 | 11 KV Polymer Disc Insulator B&S type 70 KN |
244 | Disc Fitting B&S type 70 KN |
245 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
246 | 11kV SMC Danger Board with clamp, bolts & nuts |
247 | 11kV SMC Number Plate for clamp with N&B |
248 | 11 KV Stay Set (16 x 1800 mm) |
249 | 11 KV Stay Clamp with nut and bolt |
250 | Stay Wire 7/10 SWG |
251 | 11 KV Stay Insulator |
252 | P.G. Clamp for ACSR Dog/Raccoon |
253 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
254 | PCC Pole, 8.5 Mtr. Long |
255 | 11 Mtr. STP |
256 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
257 | Aluminium Binding Wire - 6 SWG |
258 | Aluminium Jointing Sleeves |
259 | G.I. Barbed Wire |
260 | GI Wire 6 SWG |
261 | GI Wire 8 SWG |
262 | GI Wire 16 SWG |
263 | Eye Bolt |
264 | Turn Buckle |
265 | Red Oxide Paint |
266 | Aluminium Paint |
267 | 11kV `F" Bracket with N&B |
268 | Cross arm holding Clamp with nuts & bolts |
269 | V-Type Cross arm for 11KV Line, 100x50x6 mm, GI |
270 | Guarding angle 75x75x6 mm, 2200 mm long with holding clamp, packing piece, nut & bolts etc. |
271 | Stone Pad (300x300x75mm) |
272 | 11 KV Agriculture feeder segregation & feeder splitting due to overloading |
273 | 11kV New Line on 8.5 Mtr. PCC Pole with ACSR Rabbit Conductor |
274 | ACSR Rabbit Conductor |
275 | 11kV Polymer Disc Insulator T&C type 45 KN |
276 | Disc Fittings T&C type 45 KN |
277 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
278 | 11kV SMC Danger Board with clamp, bolts & nuts |
279 | 11kV SMC Number Plate for clamp with N&B |
280 | 11 KV Stay Set (16 x 1800 mm) |
281 | 11 KV Stay Clamp with nut and bolt |
282 | Stay Wire 7/10 SWG |
283 | 11 KV Stay Insulator |
284 | PG Clamps |
285 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
286 | PCC Pole, 8.5 Mtr. Long |
287 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
288 | Aluminium Binding Wire - 6 SWG |
289 | Aluminium Jointing Sleeves |
290 | G.I. Barbed Wire |
291 | GI Wire 6 SWG |
292 | GI Wire 8 SWG |
293 | GI Wire 16 SWG |
294 | Eye Bolt |
295 | Turn Buckle |
296 | 11kV "E" Bracket with N&B |
297 | 11kV `F" Bracket with N&B |
298 | GI Top Channel 100x50x2240 mm. |
299 | Clamp with nuts & bolts for 1300 mm long GI Channel |
300 | GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer |
301 | GI Top Channel 100x50x6, 1525 mm long |
302 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
303 | Cross arm holding Clamp with nuts & bolts |
304 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
305 | V-Type Cross arm for 11KV Line, 65x65x6 mm, GI Angle |
306 | Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc. |
307 | Stone Pad (300x300x75mm) |
308 | New LT Line on ACSR Rabbit Conductor on 8.5 Mtr. PCC Pole |
309 | PCC Pole, 8.5 Mtr. Long |
310 | Stone Pad (300x300x75mm) |
311 | LT clamp with nut and bolt for PCC pole |
312 | LT Shakle Insulator 100x115 mm |
313 | Bolts and Nuts for Shackle Insulators |
314 | ACSR Rabbit Conductor |
315 | Aluminium Jointing Sleeves |
316 | Aluminium Binding Wire - 6 SWG |
317 | Earth wire clamp |
318 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
319 | GI Wire 6 SWG |
320 | LT Stay Set (16 x 1800 mm) |
321 | LT Stay Clamp with nut and bolt |
322 | Stay Wire 7/10 SWG |
323 | LT Stay Insulator |
324 | Construction of new 100 KVA, 11/0.433kV Distribution Transformer S/S |
325 | 11/0.44 kV 100 KVA Transformer (Four Star Rating, Level-II) |
326 | PCC Pole, 8.5 Mtr. Long |
327 | Stone Pad (300x300x75mm) |
328 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
329 | GI Channel 100x50x2028mm (For TPMO,LA and Fuse set) |
330 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
331 | GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base |
332 | GI Channel 125x65x6, 1300mm (Tee-off) |
333 | Clamp with nuts & bolts for 1300 mm long GI Channel |
334 | 11kV Polymer Disc Insulator T&C type 45 KN |
335 | Disc Fittings T&C type 45 KN |
336 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
337 | 11kV TPMO complete set |
338 | 11kV DO Fuse Set (3 Phase) |
339 | 11kV Lightening Arrestor |
340 | G.I. Barbed Wire |
341 | 11kV SMC Danger Board with clamp, bolts & nuts |
342 | Deep Drawn Distribution boxas per technical specificationsfor 3 Ph 100 KVA DTR |
343 | LT Stay Set (16 x 1800 mm) |
344 | LT Stay Clamp with nut and bolt |
345 | Stay Wire 7/10 SWG |
346 | LT Stay Insulator |
347 | Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) |
348 | Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer |
349 | LT PVC Cable3.5x150/70Sq.mm. |
350 | ACSR Weasel Conductor |
351 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
352 | GI Wire 6 SWG |
353 | GI Strip 25x3 mm |
354 | GI Angle 100x50x2028mm (ForDistribution box)) |
355 | Al. Crimping lugs 150 sq.mm. |
356 | Al. Crimping lugs 70 sq.mm. |
357 | Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc. |
358 | Construction of new 63 KVA, 11/0.433kV Distribution Transformer S/S |
359 | 11/0.44 kV 63 KVA Transformer (Four Star Rating, Level-II) |
360 | PCC Pole, 8.5 Mtr. Long |
361 | Stone Pad (300x300x75mm) |
362 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
363 | GI Channel 100x50x2028mm (For TPMO,LA and Fuse set) |
364 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
365 | GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base |
366 | GI Channel 125x65x6, 1300mm (Tee-off) |
367 | Clamp with nuts & bolts for 1300 mm long GI Channel |
368 | 11kV Polymer Disc Insulator T&C type 45 KN |
369 | Disc Fittings T&C type 45 KN |
370 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
371 | 11kV TPMO complete set |
372 | 11kV DO Fuse Set (3 Phase) |
373 | 11kV Lightening Arrestor |
374 | G.I. Barbed Wire |
375 | 11kV SMC Danger Board with clamp, bolts & nuts |
376 | Deep Drawn Distribution box as per technical specifications for 3 Ph 63 KVA DTR |
377 | LT Stay Set (16 x 1800 mm) |
378 | LT Stay Clamp with nut and bolt |
379 | Stay Wire 7/10 SWG |
380 | LT Stay Insulator |
381 | Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) |
382 | Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer |
383 | LT PVC Cable3.5x70/35Sq.mm. |
384 | ACSR Weasel Conductor |
385 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
386 | GI Wire 6 SWG |
387 | GI Strip 25x3 mm |
388 | GI Angle 100x50x2028mm (ForDistribution box)) |
389 | Al. Crimping lugs 70 sq.mm. |
390 | Al. Crimping lugs 35 sq.mm. |
391 | Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc. |
392 | Installation of 11 KV Outgoing VCB for Feeder Segreration |
393 | 11KV Outgoing CTR 400/200/5A 350 MVA |
394 | Rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears (Adopter Panel) |
395 | 11kV 3x185 mm2XLPE Cable |
396 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
397 | Heat Shrinkable indoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
398 | 11 Mtr. STP |
399 | GI Top Channel 100x50x2240 mm. |
400 | Stone Pad (300x300x75mm) |
401 | 11 KV Polymer Disc Insulator B&S type 70 KN |
402 | Disc Fitting B&S type 70 KN |
403 | 11 KV Composite Polymer Pin Insulator with Nut and washers |
404 | P.G. Clamp for ACSR Dog/Raccoon |
405 | 11kV "E" Bracket with N&B |
406 | 11kV SMC Number Plate for clamp with N&B |
407 | 11kV SMC Danger Board with clamp, bolts & nuts |
408 | GI Channel 125x65x2028 mm long (Dropper for fuse set) |
409 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
410 | 11kV TPMO complete set |
411 | 11kV DO Fuse Set (3 Phase) |
412 | 11kV Lightening Arrestor |
413 | G.I. Barbed Wire |
414 | Aluminium Binding Wire - 6 SWG |
415 | Aluminium Paint |
416 | Red Oxide Paint |
417 | 11 KV Stay Set (16 x 1800 mm) |
418 | 11 KV Stay Clamp with nut and bolt |
419 | Stay Wire 7/10 SWG |
420 | 11 KV Stay Insulator |
421 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
422 | GI Strip 50x6 mm |
423 | GI Wire 6 SWG |
424 | G.I. Pipe 6" dia . |
425 | 11 KV Railway Crossing |
426 | 11kV 3x185 mm2XLPE Cable |
427 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
428 | HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing) |
429 | Cable Route Marker |
430 | G.I. Pipe 6" dia . |
431 | 11 Mtr. STP |
432 | Stone Pad (300x300x75mm) |
433 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
434 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
435 | 11 KV Polymer Disc Insulator B&S type 70 KN |
436 | Disc Fitting B&S type 70 KN |
437 | P.G. Clamp for ACSR Dog/Raccoon |
438 | 11kV SMC Number Plate for clamp with N&B |
439 | 11kV SMC Danger Board with clamp, bolts & nuts |
440 | G.I. Barbed Wire |
441 | Aluminium Binding Wire - 6 SWG |
442 | Aluminium Paint |
443 | Red Oxide Paint |
444 | 11 KVStay Set (16 x 1800 mm) |
445 | 11 KV Stay Clamp with nut and bolt |
446 | Stay Wire 7/10 SWG |
447 | 11 KV Stay Insulator |
448 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
449 | GI Wire 6 SWG |
450 | Requirement of Extra AB Cable for New additional Ckt at DTs |
451 | Construction ofNew LT Line on (3x50 + 1x35 +1x16)sq. mm LT ABC Cable |
452 | PCC Pole, 8.5 Mtr. Long |
453 | 11 Mtr. STP |
454 | Stone Pad (300x300x75mm) |
455 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
456 | GI Wire 6 SWG |
457 | LT Stay Set (16 x 1800 mm) |
458 | LT Stay Clamp with nut and bolt |
459 | Stay Wire 7/10 SWG |
460 | LT Stay Insulator |
461 | Dead End clamps with I-Hook (Insulated) |
462 | Suspension Clamp with I-Hook |
463 | Pole clamps with nut and bolt |
464 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
465 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
466 | Supply ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
467 | LT ABC of 3x50+1x35+1x16 sq. mm |
468 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
469 | End cap for LT AB cable |
470 | PG Clamps |
471 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
472 | Construction of New LT line on (3x95 + 1x70 +1x16)sq. mm LT ABC Cable |
473 | PCC Pole, 8.5 Mtr. Long |
474 | 11 Mtr. STP |
475 | Stone Pad (300x300x75mm) |
476 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
477 | GI Wire 6 SWG |
478 | LT Stay Set (16 x 1800 mm) |
479 | LT Stay Clamp with nut and bolt |
480 | Stay Wire 7/10 SWG |
481 | LT Stay Insulator |
482 | Dead End clamps with I-Hook (Insulated) |
483 | Suspension Clamp with I-Hook |
484 | Pole clamps with nut and bolt |
485 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
486 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
487 | Supply ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
488 | LT ABC of 3x95+1x70+1x16 sq. mm |
489 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
490 | End cap for LT AB cable |
491 | PG Clamps |
492 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
493 | Construction of New LT line on (3x120 + 1x95 +1x16)sq. mm LT ABC Cable |
494 | PCC Pole, 8.5 Mtr. Long |
495 | 11 Mtr. STP |
496 | Stone Pad (300x300x75mm) |
497 | Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
498 | GI Wire 6 SWG |
499 | LT Stay Set (16 x 1800 mm) |
500 | LT Stay Clamp with nut and bolt |
501 | Stay Wire 7/10 SWG |
502 | LT Stay Insulator |
503 | Dead End clamps with I-Hook (Insulated) |
504 | Suspension Clamp with I-Hook |
505 | Pole clamps with nut and bolt |
506 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
507 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
508 | Supply ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
509 | LT ABC of 3x120+1x95+1x16 sq. mm |
510 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
511 | End cap for LT AB cable |
512 | PG Clamps |
513 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
514 | Additional items that may be required for completion of work |
515 | 3x120 sq. mm 11 kV AB Cable |
516 | 11kV Polymer Disc Insulator with Fitting for 11 KVABC |
517 | 11kV Polymer Disc Insulators with I-Hook |
518 | GI Channel 100 x 50 x 3200 mmunit with mounting clamps, Nut, Bolt and washers |
519 | GI Angle 50 x 50 x 6 mm, 3200 mm long with 2 Nos.clamps,required Nut, Bolt and washers |
520 | GI angle65x65x6mm, 450 mm bracing set complete with clamps, Nut, bolt and washers |
521 | 33kV 3x300 mm2XLPE Cable |
522 | LT XLPE insulated unarmoured 1x50 Sq. mm. Cable |
523 | Heat Shrinkable outdoor type termination kit suitable for 33kV XLPE 3x300 Sq. mm. cable size |
524 | Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB Cable |
525 | Loop Guard complete, 3-Phase |
526 | Spacers LT PVC |
527 | Mid Span Jointing Sleeves (95 sq. mm) |
528 | LT Insulation Piercing Connectors of 95/50 sq. mm - 70/35 sq. mm (For messenger wire jumpering & energizing DB neutral) |
529 | Supply of On/Off switch for street light connections |
530 | Height raising channel 100X50,2240 mm long |
531 | Back clamp for height raising channel holding clamps with bolts & nuts |
532 | Cable jointing kit straight through(3X185 sqmm) |
533 | Cable jointing kit straight through(3X300sqmm) |
534 | Extra prefabricated GI items Like clamp,channel, angle with nut & Bolt |
535 | ArmouredLT cabling in high loss area (LT line on 3.5Cx 50 sq.mm armoured cable) |
536 | Erection of PCC Pole, 8.5 Mtr. Long |
537 | Fixing of Bolts and Nuts for Shackle Insulators |
538 | Fixing of LT Shakle Insulator 100x115 mm |
539 | Fixing of D-Straps |
540 | Stringing of LT XLPE armoured 3.5x50 Sq. mm. Cable |
541 | Fixing of Mid Span Jointing Sleeves (120 sq. mm) |
542 | Fixing of Insulating Piercing Connector (50-150 sq.mm) |
543 | Fixing of Insulation mastic tape (2inc X 10 feet). |
544 | Fixing of Three Phase Deep Drawn Distribution Box with clamps and suitable lock and key arrangment |
545 | Fixing of Single Phase Deep Drawn Distribution Box with clamps and suitable lock and key arrangment |
546 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
547 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
548 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
549 | GI Wire 6 SWG |
550 | Erection of LT Stay Set (16 x 1800 mm) |
551 | Fixing of LT Stay Clamp with nut and bolt |
552 | Erection of Stay Wire 7/10 SWG |
553 | Fixing of LT Stay Insulator |
554 | Concreting of stay set (16x 1800 mm) |
555 | Stone Pad (300x300x75mm) |
556 | Fixing of LT clamp with nut and bolt for PCC pole |
557 | Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store. |
558 | Concreting of Pole/Support (0.268 cu.M.) |
559 | Fixing of Angle for vertical Arm L50X50X6(Type-A) |
560 | Fixing of Angle for vertical Arm L50X50X6(Type-B) |
561 | Fixing of Top clamp for Vertical arm( Type-A) |
562 | Fixing of Top clamp for Vertical arm( Type-B) |
563 | Fixing of Bottom clamp for vertical arm (Type-A) |
564 | Fixing of Bottom clamp for vertical arm (Type-B) |
565 | Armouredconsumer cabling in high loss area (Service line on single phase 2Cx 6 sq.mm) |
566 | Stringing of PVC 2C x 6 sq.mm. Armoured Cable for Service Connection |
567 | Dismanting of old line service cable and connection of new armoured cable |
568 | Fixing of Polycarbonated box for single phase consumer |
569 | Armouredcomsumer cabling in high loss area (Service line on three phase 4Cx 16 sq.mm) |
570 | Stringing of PVC 4C x 16 sq.mm. Armoured Cable for Service Connection |
571 | Dismanting of old line service cable and connection of new armoured cable |
572 | Fixing of Polycarbonated box for three phase consumer |
573 | Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables(3x50+1x35+1x16) sq.mm. |
574 | Erection of PCC Pole, 8.5 Mtr. Long |
575 | Stone Pad (300x300x75mm) |
576 | Concreting of Pole/Support (0.268 cu.M.) |
577 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
578 | GI Wire 6 SWG |
579 | Erection of LT Stay Set (16 x 1800 mm) |
580 | Fixing of LT Stay Clamp with nut and bolt |
581 | Erection of Stay Wire 7/10 SWG |
582 | Fixing of LT Stay Insulator |
583 | Concreting of stay set (16x 1800 mm) |
584 | Fixing of Dead End clamps with I-Hook (Insulated) |
585 | Fixing of Suspension Clamp with I-Hook |
586 | Fixing of Pole clamps with nut and bolt |
587 | Fixing of Holding clamp for round pole with nut and bolt |
588 | Fixing of LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
589 | Fixing of LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
590 | Fixing ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
591 | Stringing of LT ABC of 3x50+1x35+1x16 sq. mm |
592 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
593 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
594 | Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store. |
595 | Fixing of End cap for LT AB cable |
596 | Fixing of PG Clamps |
597 | Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x95+1x70+1x16) sq.mm. |
598 | Erection of PCC Pole, 8.5 Mtr. Long |
599 | Stone Pad (300x300x75mm) |
600 | Concreting of Pole/Support (0.268 cu.M.) |
601 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
602 | GI Wire 6 SWG |
603 | Erection of LT Stay Set (16 x 1800 mm) |
604 | Fixing of LT Stay Clamp with nut and bolt |
605 | Erection of Stay Wire 7/10 SWG |
606 | Fixing of LT Stay Insulator |
607 | Concreting of stay set (16x 1800 mm) |
608 | Dead End clamps with I-Hook (Insulated) |
609 | Fixing of Suspension Clamp with I-Hook |
610 | Fixing of Pole clamps with nut and bolt |
611 | Holding clamp for round pole with nut and bolt |
612 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
613 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
614 | Fixing ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
615 | Stringing of LT ABC of 3x95+1x70+1x16 sq. mm |
616 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
617 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
618 | End cap for LT AB cable |
619 | Fixing of PG Clamps |
620 | Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store. |
621 | Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x120+1x95+1x16) sq.mm. |
622 | Erection of PCC Pole, 8.5 Mtr. Long |
623 | Stone pad (300x300x75mm) |
624 | Concreting of Pole/Support (0.268 Cu.M.) |
625 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
626 | GI Wire 6 SWG |
627 | Erection of LT Stay Set (16 x 1800 mm) |
628 | Fixing of LT Stay Clamp with nut and bolt |
629 | Erection of Stay Wire 7/10 SWG |
630 | Fixing of LT Stay Insulator |
631 | Concreting of Stay set (16x 1800 mm) |
632 | Dead End clamps with I-Hook (Insulated) |
633 | Fixing of Suspension Clamp with I-Hook |
634 | Fixing of Pole clamps with nut and bolt |
635 | Holding clamp for round pole with nut and bolt |
636 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
637 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
638 | Fixing ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
639 | Stringing of LT ABC of 3x120+1x95+1x16 sq. mm |
640 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
641 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
642 | End cap for LT AB cable |
643 | Fixing of PG Clamps |
644 | Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store. |
645 | Feeder bifurcation (11 KV line) |
646 | 11kV New Line on 11 Mtr. ST Pole with ACSR DOG Conductor |
647 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
648 | Erection of Disc Fitting B&S type 70 KN |
649 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
650 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
651 | Fixing of 11kV SMC Number Plate for clamp with N&B |
652 | Erection of 11 KV Stay Set (16 x 1800 mm) |
653 | Fixing of 11 KV Stay Clamp with nut and bolt |
654 | Erection of Stay Wire 7/10 SWG |
655 | Fixing of 11 KV Stay Insulator |
656 | Concreting of Stay set (16x 1800 mm) |
657 | Stringing of ACSR Dog Conductor |
658 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
659 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
660 | Erection of 11 Mtr. STP |
661 | Erection of 13 Mtr. STP |
662 | Concreting of Pole/Support (0.44 cu.M.) |
663 | Concreting of Pole (0.64 Cu.M.) |
664 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
665 | Aluminium Binding Wire - 6 SWG |
666 | Aluminium Jointing Sleeves |
667 | G.I. Barbed Wire |
668 | GI Wire 6 SWG |
669 | GI Wire 8 SWG |
670 | GI Wire 16 SWG |
671 | Eye Bolt |
672 | Turn Buckle |
673 | Painting of ST Pole with Red Oxide Paint |
674 | Painting of ST Pole with Aluminium Paint |
675 | Erection of 11kV "E" Bracket with N&B |
676 | Erection of 11kV `F" Bracket with N&B |
677 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
678 | GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer |
679 | GI Top Channel 125x65x6, 1525 mm long with clamp, bolts, nuts and washers |
680 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
681 | Cross arm holding Clamp with nuts & bolts |
682 | Erection of V-Type Cross arm for 11KV Line, 100x50x6 mm, GI |
683 | Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc. |
684 | GI guarding Angle Iron 75x75x6 mm 3010 mm long |
685 | Tree cutting Compensation |
686 | Stone Pad (300x300x75mm) |
687 | 11kV New Line on 8.5 Mtr. PCC Pole with ACSR DOG Conductor |
688 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
689 | Erection of Disc Fitting B&S type 70 KN |
690 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
691 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
692 | Fixing of 11kV SMC Number Plate for clamp with N&B |
693 | Erection of 11 KV Stay Set (16 x 1800 mm) |
694 | Fixing of 11 KV Stay Clamp with nut and bolt |
695 | Erection of Stay Wire 7/10 SWG |
696 | Fixing of 11 KV Stay Insulator |
697 | Concreting of Stay set (16x 1800 mm) |
698 | Stringing of ACSR Dog Conductor |
699 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
700 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
701 | Erection of PCC Pole, 8.5 Mtr. Long |
702 | Concreting of Pole/Support (0.268 Cu.M.) |
703 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
704 | Aluminium Binding Wire - 6 SWG |
705 | Aluminium Jointing Sleeves |
706 | G.I. Barbed Wire |
707 | GI Wire 6 SWG |
708 | GI Wire 8 SWG |
709 | GI Wire 16 SWG |
710 | Eye Bolt |
711 | Turn Buckle |
712 | Erection of 11kV "E" Bracket with N&B |
713 | Erection of 11kV `F" Bracket with N&B |
714 | GI Top Channel 125x65mm, 3200 mm with clamp, bolts, nuts and washers |
715 | GI Angle 65x65x6mm, 4300 mm long bracing with 4 clamps,bolts, nuts and washers |
716 | Cross arm holding Clamp with nuts & bolts |
717 | Erection of V-Type Cross arm for 11KV Line, 100x50x6 mm, GI |
718 | Guarding angle 75x75x6 mm, 2200 mm long with holding clamp, packing piece, nut & bolts etc. |
719 | GI guarding Angle Iron 75x75x6 mm 3010 mm long |
720 | Tree cutting Compensation |
721 | Stone Pad (300x300x75mm) |
722 | GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer |
723 | 11 KV Railway Crossing |
724 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
725 | HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing) |
726 | Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables |
727 | Laying of 3x185 sq. mm. 11 KV XLPE Insulated Cable underground in HDPE Pipe/ trenches/Riser |
728 | Cable Route Marker |
729 | G.I. Pipe 6" dia . |
730 | Erection of 11 Mtr. STP |
731 | Stone Pad (300x300x75mm) |
732 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
733 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
734 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
735 | Erection of Disc Fitting B&S type 70 KN |
736 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
737 | Fixing of 11kV SMC Number Plate for clamp with N&B |
738 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
739 | G.I. Barbed Wire |
740 | Aluminium Binding Wire - 6 SWG |
741 | Painting of ST Pole with Aluminium Paint |
742 | Painting of ST Pole with Red Oxide Paint |
743 | Erection of 11 KVStay Set (16 x 1800 mm) |
744 | Fixing of 11 KV Stay Clamp with nut and bolt |
745 | Erection of Stay Wire 7/10 SWG |
746 | Fixing of 11 KV Stay Insulator |
747 | Concreting of Stay set (16x 1800 mm) |
748 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
749 | GI Wire 6 SWG |
750 | Concreting of Pole/Support (0.44 cu.M.) |
751 | Railway Crossing Documentation, Land and Approval Fee etc. |
752 | NHAI/State Highway Crossing |
753 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
754 | HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing) |
755 | Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables |
756 | Laying of 3x185 sq. mm. 11 KV XLPE Insulated Cable underground in HDPE Pipe/ trenches/Riser |
757 | Cable Route Marker |
758 | G.I. Pipe 6" dia . |
759 | Erection of 11 Mtr. STP |
760 | Stone Pad (300x300x75mm) |
761 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
762 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
763 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
764 | Disc Fitting B&S type 70 KN |
765 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
766 | Fixing of 11kV SMC Number Plate for clamp with N&B |
767 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
768 | G.I. Barbed Wire |
769 | Aluminium Binding Wire - 6 SWG |
770 | Painting of ST Pole with Aluminium Paint |
771 | Painting of ST Pole with Red Oxide Paint |
772 | Erection of 11 KV Stay Set (16 x 1800 mm) |
773 | Fixing of 11 KV Stay Clamp with nut and bolt |
774 | Erection of Stay Wire 7/10 SWG |
775 | Fixing of 11 KV Stay Insulator |
776 | Concreting of Stay set (16x 1800 mm) |
777 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
778 | GI Wire 6 SWG |
779 | Concreting of Pole/Support (0.44 cu.M.) |
780 | NHAI/State highway crossing documentation, land charges and approval fee etc. |
781 | Road Restoration charges |
782 | Augumentation/ Reconductoring of 33 KV overhead line with Dog conductor |
783 | Stringing of ACSR Dog Conductor |
784 | Erection of PCC Pole, 9.0 Mtr. Long |
785 | Erection of 11 Mtr. STP |
786 | Concreting of Pole/Support (0.286 cu.M.) |
787 | Concreting of Pole/Support (0.44 cu.M.) |
788 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
789 | GI Wire 6 SWG |
790 | Erection of 33 KV Composite Polymer Pin Insulator with Nut and washers |
791 | Painting of ST Pole with Aluminium Paint |
792 | Painting of ST Pole with Red Oxide Paint |
793 | Fixing of 33kV SMC Danger board with clamp and N&B |
794 | Fixing of 33kV SMC Number plate with clampand N&B |
795 | Stone Pad (300x300x75mm) |
796 | G.I. Barbed Wire |
797 | Erection of 33kV "E" Bracket with N&B |
798 | Erection of 33kV "F" Bracket with N&B |
799 | Erection of V-Type Cross Arm for 33KV line 100x50x6 mm, GI |
800 | Cross arm holding Clamp with nuts & bolts |
801 | Erection of 33 KV Polymer Disc Insulator B&S type 70 KN |
802 | Disc Fitting B&S type 70 KN |
803 | Erection of 33 KV Stay Set |
804 | Fixing of 33 KV Stay Clamp with nut and bolt |
805 | Erection of Stay Wire 7/8 SWG |
806 | Fixing of 33 KV Stay Insulator |
807 | Concreting of 33 KV Stay set |
808 | Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store. |
809 | Augmentation/Reconductoring of 11kV overhead Linewith ACSR DOG Conductor |
810 | Stringing of ACSR Dog Conductor |
811 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
812 | Disc Fitting B&S type 70 KN |
813 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
814 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
815 | Fixing of 11kV SMC Number Plate for clamp with N&B |
816 | Erection of 11 KV Stay Set (16 x 1800 mm) |
817 | Fixing of 11 KV Stay Clamp with nut and bolt |
818 | Erection of Stay Wire 7/10 SWG |
819 | Fixing of 11 KV Stay Insulator |
820 | Concreting of Stay set (16x 1800 mm) |
821 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
822 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
823 | Erection of PCC Pole, 8.5 Mtr. Long |
824 | Erection of 11 Mtr. STP |
825 | Concreting of Pole/Support (0.268 cu.M.) |
826 | Concreting of Pole/Support (0.44 cu.M.) |
827 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
828 | Aluminium Binding Wire - 6 SWG |
829 | Aluminium Jointing Sleeves |
830 | G.I. Barbed Wire |
831 | GI Wire 6 SWG |
832 | GI Wire 8 SWG |
833 | GI Wire 16 SWG |
834 | Eye Bolt |
835 | Turn Buckle |
836 | Painting of ST Pole with Red Oxide Paint |
837 | Painting of ST Pole with Aluminium Paint |
838 | Erection of 11kV `F" Bracket with N&B |
839 | Cross arm holding Clamp with nuts & bolts |
840 | Erection of V-Type Cross arm for 11KV Line, 100x50x6 mm, GI |
841 | Guarding angle 75x75x6 mm, 2200 mm long with holding clamp, packing piece, nut & bolts etc. |
842 | Stone Pad (300x300x75mm) |
843 | Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store. |
844 | 11 KV Agriculture feeder segregation & feeder splitting due to overloading |
845 | 11kV New Line on 8.5 Mtr. PCC Pole with ACSR Rabbit Conductor |
846 | Stringing of ACSR Rabbit Conductor |
847 | Erection of 11kV Polymer Disc Insulator T&C type 45 KN |
848 | Disc Fittings T&C type 45 KN |
849 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
850 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
851 | Fixing of 11kV SMC Number Plate for clamp with N&B |
852 | Erection of 11 KV Stay Set (16 x 1800 mm) |
853 | Fixing of 11 KV Stay Clamp with nut and bolt |
854 | Erection of Stay Wire 7/10 SWG |
855 | Fixing of 11 KV Stay Insulator |
856 | Concreting of Stay set (16x 1800 mm) |
857 | Fixing of PG Clamps |
858 | Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed |
859 | Erection of PCC Pole, 8.5 Mtr. Long |
860 | Concreting of Pole/Support (0.268 cu.M.) |
861 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
862 | Aluminium Binding Wire - 6 SWG |
863 | Aluminium Jointing Sleeves |
864 | G.I. Barbed Wire |
865 | GI Wire 6 SWG |
866 | GI Wire 8 SWG |
867 | GI Wire 16 SWG |
868 | Eye Bolt |
869 | Turn Buckle |
870 | Erection of 11kV "E" Bracket with N&B |
871 | Erection of 11kV `F" Bracket with N&B |
872 | GI Top Channel 100x50x2240 mm. |
873 | Clamp with nuts & bolts for 1300 mm long GI Channel |
874 | GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer |
875 | GI Top Channel 100x50x6, 1525 mm long |
876 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
877 | Cross arm holding Clamp with nuts & bolts |
878 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
879 | Erection of V-Type Cross arm for 11KV Line, 65x65x6 mm, GI Angle |
880 | Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc. |
881 | Tree cutting Compensation |
882 | Stone Pad (300x300x75mm) |
883 | New LT Line on ACSR Rabbit Conductor on 8.5 Mtr. PCC Pole |
884 | Erection of PCC Pole, 8.5 Mtr. Long |
885 | Stone Pad (300x300x75mm) |
886 | LT clamp with nut and bolt for PCC pole |
887 | LT Shakle Insulator 100x115 mm |
888 | Bolts and Nuts for Shackle Insulators |
889 | Concreting of Pole/Support (0.268 cu.M.) |
890 | Stringing of ACSR Rabbit Conductor |
891 | Aluminium Jointing Sleeves |
892 | Aluminium Binding Wire - 6 SWG |
893 | Earth wire clamp |
894 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
895 | GI Wire 6 SWG |
896 | Erection of LT Stay Set (16 x 1800 mm) |
897 | Fixing of LT Stay Clamp with nut and bolt |
898 | Erection of Stay Wire 7/10 SWG |
899 | Fixing of LT Stay Insulator |
900 | Concreting of Stay set (16x 1800 mm) |
901 | Construction of new 100 KVA, 11/0.433kV Distribution Transformer S/S |
902 | Installation of 11/0.44 kV 100 KVA Transformer (Four Star Rating, Level-II) |
903 | Erection of PCC Pole, 8.5 Mtr. Long |
904 | Stone Pad (300x300x75mm) |
905 | Concreting of Pole/Support (0.268 cu.M.) |
906 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
907 | GI Channel 100x50x2028mm (For TPMO,LA and Fuse set) |
908 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
909 | GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base |
910 | GI Channel 125x65x6, 1300mm (Tee-off) |
911 | Clamp with nuts & bolts for 1300 mm long GI Channel |
912 | Erection of 11kV Polymer Disc Insulator T&C type 45 KN |
913 | Disc Fittings T&C type 45 KN |
914 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
915 | Erection of 11kV TPMO complete set |
916 | Erection of 11kV DO Fuse Set (3 Phase) |
917 | Erection of 11kV Lightening Arrestor |
918 | G.I. Barbed Wire |
919 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
920 | Fixing of Deep Drawn Distribution boxas per technical specificationsfor 3 Ph 100 KVA DTR |
921 | Erection of LT Stay Set (16 x 1800 mm) |
922 | Fixing of LT Stay Clamp with nut and bolt |
923 | Erection of Stay Wire 7/10 SWG |
924 | Fixing of LT Stay Insulator |
925 | Concreting of Stay set (16x 1800 mm) |
926 | Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) |
927 | Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer |
928 | LT PVC Cable3.5x150/70Sq.mm. |
929 | ACSR Weasel Conductor |
930 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
931 | GI Wire 6 SWG |
932 | GI Strip 25x3 mm |
933 | GI Angle 100x50x2028mm (ForDistribution box)) |
934 | Al. Crimping lugs 150 sq.mm. |
935 | Al. Crimping lugs 70 sq.mm. |
936 | Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc. |
937 | Construction of new 63 KVA, 11/0.433kV Distribution Transformer S/S |
938 | Installation of11/0.44 kV 63 KVA Transformer (Four Star Rating, Level-II) |
939 | Erection of PCC Pole, 8.5 Mtr. Long |
940 | Stone Pad (300x300x75mm) |
941 | Concreting of Pole/Support (0.268 cu.M.) |
942 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
943 | GI Channel 100x50x2028mm (For TPMO,LA and Fuse set) |
944 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
945 | GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base |
946 | GI Channel 125x65x6, 1300mm (Tee-off) |
947 | Clamp with nuts & bolts for 1300 mm long GI Channel |
948 | Erection of 11kV Polymer Disc Insulator T&C type 45 KN |
949 | Disc Fittings T&C type 45 KN |
950 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
951 | Erection of 11kV TPMO complete set |
952 | Erection of 11kV DO Fuse Set (3 Phase) |
953 | Erection of 11kV Lightening Arrestor |
954 | G.I. Barbed Wire |
955 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
956 | Fixing of Deep Drawn Distribution box as per technical specifications for 3 Ph 63 KVA DTR |
957 | Erection of LT Stay Set (16 x 1800 mm) |
958 | Fixing of LT Stay Clamp with nut and bolt |
959 | Erection of Stay Wire 7/10 SWG |
960 | Fixing of LT Stay Insulator |
961 | Concreting of Stay set (16x 1800 mm) |
962 | Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) |
963 | Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer |
964 | LT PVC Cable3.5x70/35Sq.mm. |
965 | ACSR Weasel Conductor |
966 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
967 | GI Wire 6 SWG |
968 | GI Strip 25x3 mm |
969 | GI Angle 100x50x2028mm (ForDistribution box)) |
970 | Al. Crimping lugs 70 sq.mm. |
971 | Al. Crimping lugs 35 sq.mm. |
972 | Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc. |
973 | Installation of 11 KV Outgoing VCB for Feeder Segreration |
974 | Installation of 11KV Outgoing CTR 400/200/5A 350 MVA |
975 | Rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears (Adopter Panel) |
976 | 11kV 3x185 mm2XLPE Cable |
977 | Laying of 11 KV Cable including cost of Sand & Bricks |
978 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
979 | Heat Shrinkable indoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
980 | Erection of 11 Mtr. STP |
981 | GI Top Channel 100x50x2240 mm. |
982 | Stone Pad (300x300x75mm) |
983 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
984 | Disc Fitting B&S type 70 KN |
985 | Erection of 11 KV Composite Polymer Pin Insulator with Nut and washers |
986 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
987 | Erection of 11kV "E" Bracket with N&B |
988 | Fixing of 11kV SMC Number Plate for clamp with N&B |
989 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
990 | GI Channel 125x65x2028 mm long (Dropper for fuse set) |
991 | Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers |
992 | Erection of 11kV TPMO complete set |
993 | Erection of 11kV DO Fuse Set (3 Phase) |
994 | Erection of 11kV Lightening Arrestor |
995 | G.I. Barbed Wire |
996 | Aluminium Binding Wire - 6 SWG |
997 | Painting of ST Pole with Aluminium Paint |
998 | Painting of ST Pole with Red Oxide Paint |
999 | Erection of 11 KV Stay Set (16 x 1800 mm) |
1000 | Fixing of 11 KV Stay Clamp with nut and bolt |
1001 | Erection of Stay Wire 7/10 SWG |
1002 | Fixing of 11 KV Stay Insulator |
1003 | Concreting of Stay set (16x 1800 mm) |
1004 | Concreting of Pole/Support (0.44 cu.M.) |
1005 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
1006 | GI Strip 50x6 mm |
1007 | GI Wire 6 SWG |
1008 | G.I. Pipe 6" dia . |
1009 | Control Room Extension |
1010 | Extension of existing substationcontrol room building.( as per annexure attached in tender documents.) |
1011 | 11 KV Railway Crossing |
1012 | Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size |
1013 | HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing) |
1014 | Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables |
1015 | Laying of 3x185 sq. mm. 11 KV XLPE Insulated Cable underground in HDPE Pipe/ trenches/Riser |
1016 | Cable Route Marker |
1017 | G.I. Pipe 6" dia . |
1018 | Erection of 11 Mtr. STP |
1019 | Stone Pad (300x300x75mm) |
1020 | GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers |
1021 | GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers |
1022 | Erection of 11 KV Polymer Disc Insulator B&S type 70 KN |
1023 | Disc Fitting B&S type 70 KN |
1024 | Fixing of P.G. Clamp for ACSR Dog/Raccoon |
1025 | Fixing of 11kV SMC Number Plate for clamp with N&B |
1026 | Fixing of 11kV SMC Danger Board with clamp, bolts & nuts |
1027 | G.I. Barbed Wire |
1028 | Aluminium Binding Wire - 6 SWG |
1029 | Painting of ST Pole with Aluminium Paint |
1030 | Painting of ST Pole with Red Oxide Paint |
1031 | Erection of 11 KVStay Set (16 x 1800 mm) |
1032 | Fixing of 11 KV Stay Clamp with nut and bolt |
1033 | Erection of Stay Wire 7/10 SWG |
1034 | Fixing of 11 KV Stay Insulator |
1035 | Concreting of Stay set (16x 1800 mm) |
1036 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
1037 | GI Wire 6 SWG |
1038 | Concreting of Pole/Support (0.44 cu.M.) |
1039 | Railway Crossing Documentation, Land and Approval Fee etc. |
1040 | Requirement of Extra AB Cable for New additional Ckt at DTs |
1041 | Construction ofNew LT Line on (3x50 + 1x35 +1x16)sq. mm LT ABC Cable |
1042 | Erection of PCC Pole, 8.5 Mtr. Long |
1043 | Erection of 11 Mtr. STP |
1044 | Stone Pad (300x300x75mm) |
1045 | Concreting of Pole/Support (0.268 cu.M.) |
1046 | Concreting of Pole/Support (0.44 cu.M.) |
1047 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
1048 | GI Wire 6 SWG |
1049 | Erection of LT Stay Set (16 x 1800 mm) |
1050 | Fixing of LT Stay Clamp with nut and bolt |
1051 | Erection of Stay Wire 7/10 SWG |
1052 | Fixing of LT Stay Insulator |
1053 | Concreting of stay set (16x 1800 mm) |
1054 | Dead End clamps with I-Hook (Insulated) |
1055 | Fixing of Suspension Clamp with I-Hook |
1056 | Fixing of Pole clamps with nut and bolt |
1057 | LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
1058 | LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
1059 | Fixing ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
1060 | Stringing of LT ABC of 3x50+1x35+1x16 sq. mm |
1061 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
1062 | End cap for LT AB cable |
1063 | Fixing of PG Clamps |
1064 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
1065 | Construction of New LT line on (3x95 + 1x70 +1x16)sq. mm LT ABC Cable |
1066 | Erection of PCC Pole, 8.5 Mtr. Long |
1067 | Erection of 11 Mtr. STP |
1068 | Stone Pad (300x300x75mm) |
1069 | Concreting of Pole/Support (0.268 cu.M.) |
1070 | Concreting of Pole/Support (0.44 cu.M.) |
1071 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
1072 | GI Wire 6 SWG |
1073 | Erection of LT Stay Set (16 x 1800 mm) |
1074 | Fixing of LT Stay Clamp with nut and bolt |
1075 | Erection of Stay Wire 7/10 SWG |
1076 | Fixing of LT Stay Insulator |
1077 | Concreting of stay set (16x 1800 mm) |
1078 | Dead End clamps with I-Hook (Insulated) |
1079 | Fixing of Suspension Clamp with I-Hook |
1080 | Fixing of Pole clamps with nut and bolt |
1081 | Fixing of LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
1082 | Fixing of LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
1083 | Fixing ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
1084 | Stringing of LT ABC of 3x95+1x70+1x16 sq. mm |
1085 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
1086 | End cap for LT AB cable |
1087 | Fixing of PG Clamps |
1088 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
1089 | Construction of New LT line on (3x120 + 1x95 +1x16)sq. mm LT ABC Cable |
1090 | Erection of PCC Pole, 8.5 Mtr. Long |
1091 | Erection of 11 Mtr. STP |
1092 | Stone Pad (300x300x75mm) |
1093 | Concreting of Pole/Support (0.268 cu.M.) |
1094 | Concreting of Pole/Support (0.44 cu.M.) |
1095 | Fixing of Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) |
1096 | GI Wire 6 SWG |
1097 | Erection of LT Stay Set (16 x 1800 mm) |
1098 | Fixing of LT Stay Clamp with nut and bolt |
1099 | Erection of Stay Wire 7/10 SWG |
1100 | Fixing of LT Stay Insulator |
1101 | Concreting of stay set (16x 1800 mm) |
1102 | Dead End clamps with I-Hook (Insulated) |
1103 | Fixing of Suspension Clamp with I-Hook |
1104 | Fixing of Pole clamps with nut and bolt |
1105 | Fixing of LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box |
1106 | Fixing of LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection |
1107 | Fixing ofDeep Drawn LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing and suitable lock and key arrangment |
1108 | Stringing of LT ABC of 3x120+1x95+1x16 sq. mm |
1109 | 1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks. |
1110 | End cap for LT AB cable |
1111 | Fixing of PG Clamps |
1112 | 1x16 mm2 XLPE insulated Al. cable for energising the street light |
1113 | Additional items that may be required for completion of work |
1114 | 3x120 sq. mm 11 kV AB Cable |
1115 | 11kV Polymer Disc Insulator with Fitting for 11 KVABC |
1116 | 11kV Polymer Disc Insulators with I-Hook |
1117 | Erection & concreting of Extra Stud Pole complete with clamps, |
1118 | GI Channel 100 x 50 x 3200 mmunit with mounting clamps, Nut, Bolt and washers |
1119 | GI Angle 50 x 50 x 6 mm, 3200 mm long with 2 Nos.clamps,required Nut, Bolt and washers |
1120 | GI angle65x65x6mm, 450 mm bracing set complete with clamps, Nut, bolt and washers |
1121 | LT XLPE insulated unarmoured 1x50 Sq. mm. Cable |
1122 | Heat Shrinkable outdoor type termination kit suitable for 33kV XLPE 3x300 Sq. mm. cable size |
1123 | Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB Cable |
1124 | Laying of 3x300 sq. mm. 33 KV XLPE Insulated Cable underground in HDPE Pipe or trenches ( For Railway/Road Crossing) |
1125 | Drilling & Laying of HT Underground Cable using HDD method without using HDPE Pipe |
1126 | Loop Guard complete, 3-Phase |
1127 | Spacers LT PVC |
1128 | Mid Span Jointing Sleeves (95 sq. mm) |
1129 | LT Insulation Piercing Connectors of 95/50 sq. mm - 70/35 sq. mm (For messenger wire jumpering & energizing DB neutral) |
1130 | Fixing of On/Off switch for street light connections |
1131 | Mounting of cable on DP structure(including loop and riser) |
1132 | Height raising channel 100X50,2240 mm long |
1133 | Back clamp for height raising channel holding clamps with bolts & nuts |
1134 | Cable jointing kit straight through(3X185 sqmm) |
1135 | Cable jointing kit straight through(3X300sqmm) |
1136 | Extra prefabricated GI items Like clamp,channel, angle with nut & Bolt |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail