|
| 1 | Item |
| 2 | 11/.4 KV 100 KVA DISTRIBUTION SUB STATION |
| 3 | 11/.4 KV 100 KVA DTR (REC Sep. ord 11/1976 |
| 4 | Prov. ST PolePole 9 Mtr. Long W/L 200 Kgs |
| 5 | Muff for steel tubular pole with concrete filling |
| 6 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line |
| 7 | MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA\"s ) |
| 8 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 9 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for transformer bed |
| 10 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] |
| 11 | MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. |
| 12 | MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
| 13 | MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing |
| 14 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos |
| 15 | MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos |
| 16 | G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm |
| 17 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
| 18 | D.O Fuse unit |
| 19 | Surge Arrester, 9 kV Station Class |
| 20 | Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) |
| 21 | Stay set complete |
| 22 | Staywire (7/3.15mm)( 7 Kg per stay set) |
| 23 | Pipe earthing with GI,Charcoal & Salt |
| 24 | Prov. LT distribution panel with MCCB (160 A, 10 KA, 4P,1 No.) & SFU (32 A 5 No. rewireble) for 100KVA Trf. as per specification |
| 25 | Half clamp (M.S. Flat 50x6) |
| 26 | Full clamps (M.S. Flat 50x6) |
| 27 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 28 | Aluminium Thimbles |
| 29 | Copper Thimble |
| 30 | Danger Plate |
| 31 | Barbed wire (REC Sp F 3/1981) |
| 32 | LT Cable 3-1/2 core-120mm sq. |
| 33 | Alluminium Paint |
| 34 | Prov.ACSR, 6/1/3.35 mm |
| 35 | Prov. Transformer structure protection plinth(Civil Work As per HPSR) for 100KVA S/Stn |
| 36 | 11 kV HT Line |
| 37 | Prov.11 KV ABC( 3x70+35mm)with bare massengerx2cables and Additional 1% (Sagging,and wastage} |
| 38 | Prov. Steel tubular poles. 9mtrs |
| 39 | Muff for steel tubular pole (2000mm long) with concrete filling |
| 40 | Cross Arm: [Channel Iron (100x50x6 mm), Length 600 mm (i/c tolerence of 100mm either side) x2structureRun Through structure (Formation Tringle) |
| 41 | Angle Iron (50x50x5 mm), Length (2x750) mm x 2 structuresRun Through structure (Formation Tringle) |
| 42 | Anchoring assembly for HT |
| 43 | Suspension assembly for HT |
| 44 | Facad hook for HT Heat Shrinkable Strait Through Jointing Kit |
| 45 | Heat Shrinkable Strait Through Jointing Kit |
| 46 | Cable termination Kit |
| 47 | T-Jointing Kit |
| 48 | Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]Dead End Structures: |
| 49 | X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.]Dead End Structures: |
| 50 | X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]Dead End Structures: |
| 51 | Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.) |
| 52 | Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set) |
| 53 | HT earthing set complete (REC Constr. Standared J-1) |
| 54 | Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
| 55 | Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
| 56 | Danger Plate (250X200X1.6 mm) |
| 57 | Barbed wire (REC Sp F 3/1981) |
| 58 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
| 59 | D.O Fuse unit |
| 60 | Alluminium Paint |
