|
| 1 | Demolition of cement concrete in any description and in any position roofs, floors, beams, staircases, landing and similar works (other than ground floor) etc complete. |
| 2 | M&L for 10 mm thick rendering in CM 1:4 on roof surfaces finished even and smooth without using extra cement using WPC @3% by weigh of cement .(WPC will be measured and paid separately) |
| 3 | M&L for preparation of new plastered surfaces ofroof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold appliedbituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torchapplication method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solarreflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. |
| 5 | Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed. |
| 6 | Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed. |
| 7 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 8 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 9 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane. |
| 10 | S&F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane. |
| 11 | S&F in repair vitreous china wash down water closet pan of pedestal pattern, white with \"P\" or \"S\" traps,including connecting to trap and to flushing pipe etc complete all as specified. |
| 12 | S&F in repPVC (SWR) WC connector 110mm dia. |
| 13 | S&F in repair Vitreous China Squatting pan \"Orissa pattern\" size 580 x440 mm white with integral foot rest. |
| 14 | Fixing only in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. Note: PVC flushing cistern shall be issued under Sch B for fixing free of cost. |
| 15 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers |
| 16 | S&Fin repair sinksmade of stainless steel with drainage board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall sizesize 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 17 | Supply and Fixin repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed. |
| 18 | S&F in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including CI bracketscomplete all as specified and directed. |
| 19 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and fair. |
| 20 | M&L for 15 mm thick screed bed in CM 1:6 finished rough for laying floor tiles. |
| 21 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 22 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm,in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 23 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). |
| 24 | Dismantling of floor, hearth or wall tiling including cement mortar bedding. |
| 25 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles. |
| 26 | M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wallset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 27 | M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation. |
| 28 | M & L for preparation of wood or wood base materials of any description and girth not otherwise described and treated with two coats of creosote oil. |
| 29 | Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets |
| 30 | Fixing only 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces.Note: 4mm plywood shall be issued under Sch B for fixing free of cost. |
| 31 | Fixing only 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.Note: 4mm plywood shall be issued under Sch B for fixing free of cost. |
| 32 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces. |
| 33 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces. |
| 34 | M & L for 2 nd class Hard wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm. |
| 35 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 36 | Dismantling of rain water pipes, cast and vent pipes of any dia, any pattern including all fittings. |
| 37 | S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls |
| 38 | S&F PVC (SWR) pipes single socketed 75mm dia in any length with rubber ring joints fixed to walls |
| 39 | S&F PVC (SWR) bends any radius, bend 110mm dia with access door |
| 40 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door110mm dia. |
| 41 | S&F PVC (SWR) bends any radius, with access door75mm dia. |
| 42 | S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 43 | S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) |
| 45 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 46 | M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protectionsurfacefinished even and smooth using with extra cement |
| 47 | S&F Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 48 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings,staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces |
| 49 | S&F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 50 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 51 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 52 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store. |
| 53 | Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store. |
| 54 | Dismantling of water tanks exc 1000 ltrs & n. exc 2000 ltrs capacity and removing to store. |
| 55 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 56 | S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in(Make : Sintex/Polycon /Poly Tap ) |
| 57 | S&F PVC water storage tanks of 2000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in(Make : Sintex/Polycon /Poly Tap ) |
| 58 | S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 59 | S & F in repairs fancy type 20mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 60 | S & F in repair chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads,screwed down high pressure, with or without lettered \"hot or cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 61 | S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make : Jindal/Leader/Scico) |
| 62 | S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified. |
| 63 | Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed. |
| 64 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 65 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm. |
| 66 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete. |
| 67 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick. |
| 68 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc. |
| 69 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 70 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 71 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 72 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 73 | S& F Aluminium anodised barrel tower bolts150mm long of extruded section and fixed |
| 74 | S& F Aluminium anodised barrel tower bolts100mm long of extruded section and fixed |
| 75 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 76 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 77 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 78 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length includingvulcanised rubber piece |
| 79 | S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
| 80 | S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed” |
| 81 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 82 | M & L 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement. |
| 83 | Material and labour for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement. |
| 84 | M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces (mixed with liquid WPC as per manufacturers instructions) of cement finishing the surfaces even & smooth w/o using extra cement.(WPC will be measured and paid separately) |
| 85 | Supply only liquid water proofing compound. |
| 86 | Preparing newly plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD),over a coat of 3mm thick wall care putty all as specified including preperation of surfaces |
| 87 | Preparing newly plastered surfaces of ceilings and applying three coats of white wash. |
| 88 | Preparing newly plastered surfaces of wallsand applying Two coats of cement base paint on surfaces of walls over one coat of alkali resistant primer all as specified and directed. |
| 89 | Disconnecting exc 250 and N.exc 500 Ltrs tank, setting aside ( or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnection and re-fixing in position.Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc. |
| 90 | S & F in repair Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats. |
| 91 | S & F in repair Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats. |
| 92 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 93 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 94 | Taking down shutters repair and refixing in same openingarea not exceeding 1.0 Sqm. |
| 95 | Taking down shutters repair and refixing in same openingarea exc 1.0 sqm but not exceeding 2.0 Sqm. |
| 96 | S&F in repair Grating doom 125mm dia with and without wast holePTMT (Minimum weight 40 grms) |
| 97 | S&F in repair Grating doom 100mm dia with and without wast holePTMT (Minimum weight 40 grms) |
| 98 | S&F 32mm PVC waste pipe for kitchen sink and WHB, 450 mm long. |
| 99 | S&F framed work such as grills, gratting, etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes,gatesand similar work con-forming to Fe.290.Gde-E-165. |
| 100 | S&F PVC wall paneling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 101 | S&F 5mm PVC sheet fillet of width 35mm for wall peneling inclusive of fixing on to wall |
| 102 | S&F Tar felt PBS roll, for waterproffing size(20mtrX1mtrX2mm) as per spection and direction |
