Supply And Fixing Of Play Equipment In Parks Providing and fixing of FRP multy lane slide :-Safe play area–5.2 mtr. x 2.5 mtr.Height–1.5 mtr.Its required area 4.2 mtr. x 1.8 mtr. Platform height should be 1.5 mtr. From ground level and slide length 2.8 , bhilwara-Rajasthan

Supply And Fixing Of Play Equipment In Parks Providing and fixing of FRP multy lane slide :-Safe play area–5.2 mtr. x 2.5 mtr.Height–1.5 mtr.Its required area 4.2 mtr. x 1.8 mtr. Platform height should be 1.5 mtr. From ground level and slide length 2.8 mtr. There is 2 nos. of FRP slide should be made by fiber glass reinforced plastic having thickness 5mm overall both side finish. Connected with platform should be made by 14 SWG CRC sheet with FRP non skid lamination. Leg support of the platform should be made by 48 mm IDGI pipe 14 guage. Ladder should be made by 32 mm IDGI pipe. The ladders railing should be made up of 25 mm IDGI pipe it is design in such a way that a ladder itself has safety railings for the platform all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes.extend the life of equipments. Slide should be made in a single mould piece there is no any joint in the slide. FRP components should be paint by 3 layers of PU paint. Base system as per order by engineer in charge. 2 Providing & fixing of FRP nursery tiny mini :-Safe play area–4.0 mtr. X 0.9 mtr.Height–0.9 mtr.Its total required area 3 mtr. X 0.6 mtr. Platform height from ground level 0.9 mtr. And made by 32 mm IDGI pipe for leg support and ladder should be made by steel frame with sheet 16 G. thick (RC) sheet 1.54 mm thick railing should be made by 20 mm IDGI pipe. Slide length 1.8 mtr. With 5 mm thick overall slide chute 0.5 mtr. Wide. Grouted in C.C base system. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. Slide should be made in a single mould piece there is no any joint in the slide. FRP components should be paint free. And install by C.C base system as per order by engineer in charge. 3 Providing & fixing of MGR :- Safe play area–2.5 mtr. DiaHeight –1.0 mtr.Its total required area 1.5 dia mtr. Quter frame should be made by 32 mm IDGI pipe and handrail and leg support should be made by 20 mm IDGI pipe. Center pipe should made by 48 mm IDGI pipe. Connected with heavy duty ball bearing 6312 reputed make only. Seating arrangement should be made by fiber glass reinforced plastic with 2 mm thickness. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it.The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 3-8 year. 4 Providing & installation of horizontal climber :- Safe play area–2.2 mtr. X 4.0 mtr. Dia Height–2.4 mtr.Its required area 1.2 mtr. X 3.0 mtr. X 2.4 mtr. And leg support should made up of 50 mm IDGI pipe outer frame should be made by 32 mm IDGI pipe in main frame joint with 25 mm IDGI pipe in handrails/inner frame in dia. Ladder should be made by 20 mm IDGI pipe. And connected with proper fitment like welding, fastener. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 6-12 year. 5 Providing and fixing of seater arch swing :-Safe play area– 4 mtr. X 2.5 mtr.Height– 2.4 mtr.Total required area of swing is 3 mtr. X 1.5 mtr. And height shall be 2.4 mtr. From ground level top bar of swing is made by 80 mm IDGI pipe 12 guage. And 4 nos. of leg support pipe should be 80 mm IDGI pipe 12 guage. Top bar attach with 2 nos. of alloy steel coasting bearing with GL chain. Seating arrangement of swing is made up of 10 mm thick. Anti skid chequered reinforced rubber belt. Bearing should be heavy duty only. All the sharp edges and corner properly grinded to give.Smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 3-16 year. 6 Providing & installation of horse rider :-Providing & fixing of horse spring rider its required area 1.0 mtr. X 0.8 mtr. Total height 0.5 mtr. FromGround level. Leg support should be made by 25 mm IDGI pipe & handle made by 15 mm NB pipe. Seat should be made by FRP animal duck/horse shape with 4 mm thick connected with heavy duty spring. Grounted in CC. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure plyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 6-12 year. 7 Providing and installation of multy seater see saw :- safe play area – 4 mtr. X 1.5 mtr.Height – 0.8 mtr.The multy seater sae saw comprises 4 nos. of FRP seats having thickness 3 mm FRP the leaver is consisted of 25 mm IDGI and 80 mm IDGI powder coated pipe. The stand for sea saw is 50 mm IDGI pipe. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments.All the sharp edges and corner properly the pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge.

INR 500 /-

INR 96000.0 /-

INR 48 Lakhs /-

Name of Work : Nagar Parishad Shetra me Shithit Vibhinn Parko me Khel Upkaran Supply avm Fixing Karne ka Kaeya

Sl. No.	Item Description
1	Providing and fixing of FRP multy lane slide :- Safe play area–5.2 mtr. x 2.5 mtr. Height–1.5 mtr. Its required area 4.2 mtr. x 1.8 mtr. Platform height should be 1.5 mtr. From ground level and slide length 2.8 mtr. There is 2 nos. of FRP slide should be made by fiber glass reinforced plastic having thickness 5mm overall both side finish. Connected with platform should be made by 14 SWG CRC sheet with FRP non skid lamination. Leg support of the platform should be made by 48 mm IDGI pipe 14 guage. Ladder should be made by 32 mm IDGI pipe. The ladders railing should be made up of 25 mm IDGI pipe it is design in such a way that a ladder itself has safety railings for the platform all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes.extend the life of equipments. Slide should be made in a single mould piece there is no any joint in the slide. FRP components should be paint by 3 layers of PU paint. Base system as per order by engineer in charge.
2	Providing & fixing of FRP nursery tiny mini :- Safe play area–4.0 mtr. X 0.9 mtr. Height–0.9 mtr. Its total required area 3 mtr. X 0.6 mtr. Platform height from ground level 0.9 mtr. And made by 32 mm IDGI pipe for leg support and ladder should be made by steel frame with sheet 16 G. thick (RC) sheet 1.54 mm thick railing should be made by 20 mm IDGI pipe. Slide length 1.8 mtr. With 5 mm thick overall slide chute 0.5 mtr. Wide. Grouted in C.C base system. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. Slide should be made in a single mould piece there is no any joint in the slide. FRP components should be paint free. And install by C.C base system as per order by engineer in charge.
3	Providing & fixing of MGR :- Safe play area–2.5 mtr. Dia Height –1.0 mtr. Its total required area 1.5 dia mtr. Quter frame should be made by 32 mm IDGI pipe and handrail and leg support should be made by 20 mm IDGI pipe. Center pipe should made by 48 mm IDGI pipe. Connected with heavy duty ball bearing 6312 reputed make only. Seating arrangement should be made by fiber glass reinforced plastic with 2 mm thickness. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 3-8 year.
4	Providing & installation of horizontal climber :- Safe play area–2.2 mtr. X 4.0 mtr. Dia Height–2.4 mtr. Its required area 1.2 mtr. X 3.0 mtr. X 2.4 mtr. And leg support should made up of 50 mm IDGI pipe outer frame should be made by 32 mm IDGI pipe in main frame joint with 25 mm IDGI pipe in handrails/inner frame in dia. Ladder should be made by 20 mm IDGI pipe. And connected with proper fitment like welding, fastener. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 6-12 year.
5	Providing and fixing of seater arch swing :- Safe play area– 4 mtr. X 2.5 mtr. Height– 2.4 mtr. Total required area of swing is 3 mtr. X 1.5 mtr. And height shall be 2.4 mtr. From ground level top bar of swing is made by 80 mm IDGI pipe 12 guage. And 4 nos. of leg support pipe should be 80 mm IDGI pipe 12 guage. Top bar attach with 2 nos. of alloy steel coasting bearing with GL chain. Seating arrangement of swing is made up of 10 mm thick. Anti skid chequered reinforced rubber belt. Bearing should be heavy duty only. All the sharp edges and corner properly grinded to give. Smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 3-16 year.
6	Providing & installation of horse rider :- Providing & fixing of horse spring rider its required area 1.0 mtr. X 0.8 mtr. Total height 0.5 mtr. FromGround level. Leg support should be made by 25 mm IDGI pipe & handle made by 15 mm NB pipe. Seat should be made by FRP animal duck/horse shape with 4 mm thick connected with heavy duty spring. Grounted in CC. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure plyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge age capacity 6-12 year.
7	Providing and installation of multy seater see saw :- safe play area – 4 mtr. X 1.5 mtr. Height – 0.8 mtr. The multy seater sae saw comprises 4 nos. of FRP seats having thickness 3 mm FRP the leaver is consisted of 25 mm IDGI and 80 mm IDGI powder coated pipe. The stand for sea saw is 50 mm IDGI pipe. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. All the sharp edges and corner properly the pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C base system as per order by engineer in charge.