|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation, trenches, drains (Any width or square metre on plan), including dressing of sides and ramming of bottoms, lift upto any height, including getting out the excavated soil and disposal of surplus excavated soil as directed in all kinds of classification, of soils such as pick work, jumper work, blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 2 | Providing and laying damp-proof course 40 mm (forty miilimetre) thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 12.5 mm (twelve point five millimetre) nominal size including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (One point sevenkilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 5 | Providing and laying upto firstfloor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20 mm nominal size) to give a smooth and even surface including centring and shuttering etc but excluding costof reinforcement in : String courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 8 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 9 | Making plinth protection 50mm (fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 10 | Constructing Course rubble hammer dressed \"U\" shape open surface drain with side wall. 15x22 cm (fifteen into twenty two centimetre)in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (forty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for :including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 12 | Foundations, footings, bases of columns, sqm etc. for mass concrete |
| 13 | Suspended floors, roofs, landings, balconies and acceess platform within all leads, lifts and . |
| 14 | Lintels, beams, plinth beams, girders, sqm bressumers and cantilevers within all leads, lifts. |
| 15 | Columns, Pillars, Piers, Abutments, Postsand Struts |
| 16 | Edges of slabs and breaks in floors and walls within all leads, lifts. |
| 17 | Weather shade, Chajjas, corbels etc.including edges. |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wire upto all floor level. Thermo-Mechanically Treated bars of grade Fe-500D (five hundred dia) or more including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 19 | Providing and laying in position machine batched and machine mixed design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103(nine thousand one hundred three)to accelerate, retard setting of concrete, improve workability without impairing strength and durability. All works above plinth level upto Floor -V level. (Note :- Cement content considered in this item is @ 330 kg/cum(three hundred thirty kilogram/cubimetre). Excess/ less cement used as per design mix is payable/recoverable separately). including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 20 | Providing and laying in position machine batched and machine mixed design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103(nine thousand one hundred three)to accelerate, retard setting of concrete, improve workability without impairing strength and durability. All works above plinth level upto Floor -V level. (Note :- Cement content considered in this item is @ 330 kg/cum(three hundred thirty kilogram/cubimetre). Excess/ less cement used as per design mix is payable/recoverable separately). including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 21 | Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)in foundation above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 22 | Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 23 | Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (one cement :four coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 24 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate) 20 mm (twenty millimetre) nominal size at plinth level including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 25 | Boulder filling under floors tightly hand packed including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 26 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm (five millimetre to ten millimetre), in the recharge pit, over the existing layer of boulders, including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 27 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm ( point fifty square metre) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge |
| 28 | Providing edge moulding to 18 mm (eighteen millimetre) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge |
| 29 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought frame and fixed in position with hold fast lugs or with dash fasteners of required dia& length (hold fast lugs or with dash fastener shall be paid for separately). Second class deodarwood including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 30 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately(Note:- Butt hinges and necessary screws shall be paidseparately) Second class Deodar wood : 40 mm (forty millimetre) thick shutters including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 31 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (twenty five millimetre to forty millimetre) thick : Particle Board 12 mm (twelve) thick: Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 32 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (twenty five millimetre to forty millimetre) thick : Float glass panes 4 mm (four centimetre) thick glass pane (weight not less than 10 (Ten) kg per sqm) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 33 | Providing and fixing 2nd class deodar wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four millimetre) in both directions with wire of dia 0.63 mm (zero point sixty three millimetre) , for doors, windows and clerestory windows with hinges and necessary screws : 40 mm (forty millimetre)thick shutters With ISI marked stainless steel butt hinges of required size including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 34 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm (one point twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm (twenty millimetre) dia including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 35 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 36 | Providing 40x5 mm (forty into five millimetre)flat iron hold fast 40 cm (fourty centimetre)long including fixing to frame with 10 mm (ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm (thirty into ten into fifteen centimetre)1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty millimetre)nominal size including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 37 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 38 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar worksincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 39 | Providing and fixing 250x16 mm (two hundred fifty into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 40 | Providing and fixing 250x10 mm (two hundred fifty into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (one thousand eight hundred sixty eight) ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 41 | Providing and fixing 125 mm (one hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (one thousand eight hundred sixty eight)) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 42 | Providing and fixing Twin Rubber aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (one thousand eight hundred sixty eight)) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 43 | Providing and laying ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 (three point three) kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 44 | Providing And fixing glazed Digital tiles 300x600 x 8 mm ( (three hundred into six hundred into eight millimetre) thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (twelve millimetre) thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 45 | Providing and layingvitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three)including grouting the joints with white cement and matching pigments etc., complete : Tile size 600 X 600 mm (six hundred into six hundred millimetre) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 46 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three) including grouting the joint with white cement & matching pigments etc. complete :Size of tile 600x600 mm (six hundred into six hundred millimetre) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 47 | Providing and laying anti skid matte finish full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 (three point three) kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 48 | Tile size 30X150 cm (thirty into one hundred fifty centimetre) |
| 49 | Providing and laying matte finish digital Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 (three point three)kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 50 | Size of tile 20x150 cm (twenty into one hundred fifty centimetre) |
| 51 | Providing and fixing 0.62 mm (point sixty two millimetre) thick troughed prepainted steel sheet roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating, i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 52 | Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.62 mm (point sixty two millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five)microns primer coating + back coat of polyster of 5 (five)microns over 5(five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers completeincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 53 | Providing and fixing Eaves board/facia with 0.62 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five)microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete (Base members of steel work shall be measured & paid separtely) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 54 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) 6 mm ( six millimetre) thick Cement fiber board as per IS: 14862 including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 55 | 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement: six coarse sand)including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 56 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat withcement primer including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 57 | Finishing walls with 100% (hundred percent) Premium acrylic emulsion paint having VOC less than 50 (fifty) gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 (one point forty three) litre/ 10 (ten) sqm. Over and including priming coat of exterior primer applied @ 0.90 (zero point ninty) litre/10 (ten) sqm including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 58 | Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 59 | Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 60 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 (zero point ninty) ltr/ 10 (ten) sqm over an under coat of primer applied @ 0.80 (zero point eighty) ltr/ 10 (ten) sqm of approved brand and manufactureincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 61 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 62 | (a) 15 mm (fifteen millimetre) nominal bore |
| 63 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 64 | (a) 15 mm (fifteen millimetre) nominal bore |
| 65 | (b) 20 mm (twenty millimetre) nominal bore |
| 66 | Making connection of G.I. distribution branch with G.I. main 25 to 40 mm (Twenty five to forty millimetre) nominal bore size by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 67 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 68 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 69 | 15 mm (fifteen millimetre) nominal bore |
| 70 | 20 mm (twenty millimetre) nominal bore |
| 71 | Providing and fixing brass stop cock of approved quality. : 15 mm (fifteen millimetre) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 72 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with veat and bd, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the W.C pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 73 | Providing and fixing wash basin with C.I. brackets, , 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: stainless steel AISI-304(18/8) size 530x 345 mm (five hundred thirteen into three hundred forty five millimetre) of Cera or its equivalent, pedestal 1108 of cerawith single 15 mm (fifteen millimeter) C.P. brass pillar tap of opel prime series (OPP-CHR-15001PM) of Jaquar or its equivalent including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 74 | Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm (six hundred ten into four hundred sixty millimetre) bowl depth 200 (two hundred)including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 75 | Providing and fixing 8 mm (eight millimetre dia C.P./5.5. Jet with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 76 | Providing and fixingSemi rigid pipe 40 mm (forty millimetre) diaP.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings completeincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 77 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre)beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 78 | 15mm (fifteen millimetre) nominal bore |
| 79 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetre) Glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. Brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 80 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 81 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 82 | Providing and fixing C.P. towel ring trapezoidal shape 215 mm ( two hundred fifteen millimetre) long, 200 mm (two hundred millimetre) wide with minimum distances of 37 mm (thrity seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.(eighty eight gram) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 83 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm (forty centimetre) length 15 mm (fifteen millimetre) nominal bore including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 84 | Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalentcomplete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 85 | Providing and Fixing Toilet paper holder C.P. brasscomplete in all respectincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 86 | Providing and fixing Polyethelene-Aluminium -Polyethelene PE-AL-PE composit tank, IS : 12701 (twelve thosand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 87 | Providing and fixing 15 mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 88 | Providing and fixing110 mm (one hundred ten millimetre) high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 89 | Providing and fixing110 mm X 90 mm (one hundred ten into ninety millimetre) size PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 90 | Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 91 | 110 mm (one hundred ten millimetre) dia |
| 92 | Providing and fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 93 | 110 mm (one hundred ten millimetre) dia |
| 94 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 95 | 110 mm (one hundred ten millimetre) dia |
| 96 | Providing and fixing PVC Cawl ISI marked of approved design with steel screws and rawal plugs etc. completeincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 97 | 110 mm (one hundred ten millimetre) dia |
| 98 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. completeincluding carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 99 | 110 mm (one hundred ten millimetre) dia |
| 100 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slabwith 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (fourty millimetre)nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design, Inside size 120x90 cm (one hundred into ninty centimetre) and 90 cm (ninty centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) with sewer bricks conforming to IS:4885 including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 101 | Constructing soak pit 1.20x1.20x1.20 m (one point twenty into one point twenty into one point twenty metre) filled with brickbats including S.W. drain pipe 100 mm (hundred millimetre) diameter and 1.20 m (one point twenty metre) long complete as per standard design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 102 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5 (two point five) Rectangular shape 600x450 mm (six hundred into four hundred fifty millimetre) internal dimention including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
