|
| 1 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (8.87X3=26.61) |
| 2 | Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means. (0.92X3=2.76) |
| 3 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. (1X3=3) |
| 4 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure. (41.89X3=125.67 |
| 5 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 600x600 mm. (46.87X3=140.61) |
| 6 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ). Size 600x600 mm (72.74X3=218.22) |
| 7 | Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps (11.05X3=33.15) |
| 8 | Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (46.45X3=139.35 |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc.including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. Fixed Portion (413.10X3=1239.30) |
| 10 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (129.81X3=389.43) |
| 11 | Providing Polyster Powder coating 50 microne any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop & workshop to site of work (542.91X3=1628.73) |
| 12 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on Both side. (21.44X3=64.32) |
| 13 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . Float glass panes of 5 mm thickness. (29.49X3=88.47) |
| 14 | Providing and fixing CP sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (6X3=18) |
| 15 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete ISI designation no I (Size of door up to 700mm) (8X3=24) |
| 16 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (16.58X3=49.74 |
| 17 | Providing and fixing door lock for aluminium doors fixed with necessary screw etc. complete (6X3=18) |
| 18 | Providing and fixing door stopper for aluminium doors fixed with necessary screw etc. complete (8X3=24) |
| 19 | Unforseen works as per site reqirement (1X3=3) |
| 20 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (5X3=15) |
| 21 | Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. 12X3=36) |
| 22 | Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade complete. (20X3=60) |
| 23 | Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch. (10X3=30) |
| 24 | Supply and erection of PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq.mm, 1100volts grade (185X3=555) |
| 25 | Supply and erection ofPVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade. (40X3=120) |
| 26 | Supply and erection of PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade (370X3=1110) |
| 27 | Supply and erection of PVC insulated copper conductor single core FRLS cable (ISI marked) overall 10 sq.mm, 1100volts grade (10X3=30) |
| 28 | Supply & erection of PVC pipes Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Flushed. (80X3=240) |
| 29 | Supply & erection of Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) On Surface 34.12 ii (60X3=180) |
| 30 | Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: MCB Single Pole 6-32amp. (10kA, Curve-C) (18X3=54) |
| 31 | MCB Four Pole 50, 63amp. (10kA, Curve-C) (1X3=3) |
| 32 | Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB\"s as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:- TP&N Double Door Vertical DB\"s 8 way each (With provision of FP MCCB 125 amp.)(1X3=3) |
| 33 | AC Plug and Socket SP&N with provision of One Single Pole MCB 20amp.(5X3=15) |
| 34 | Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-MCCB Four Pole 125 amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting(2X3=6 |
| 35 | MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm) (1X3=3) |
| 36 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications Overall size 25sq.mm (4Core) Un-armoured (On-Surface)(60X3=180) |
| 37 | Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation Earthing with 25mm x 3mm Copper Tape (upto 8Metre in Length) (2X3=6) |
| 38 | Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc Additional Length 25mm x 3mm thick Copper Tape (10X3=30) |
| 39 | Supply and Erection of Recess mounted white powder coated CRCA housing wth full window acrylic diffuser LED Panel 2\"x2\" 36w of Make Jaquar Item Code LULTO IS 036XC or its equilant make Phillips / Crompton including cutting of ceiling , erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site. (10X3=30) |
| 40 | Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.(1X3=3) |
| 41 | Supply and erection of Wall Fan Plastic Body 400mm, 16\" including flexible wire & petty material etc. for connections and testing completein all respect as approved and desired by the Engineer in-charges at site.Make;-Crompton WM Hiflo Wave / Havell\"s D’Zire / Anchor Wall HS. (5X3=15) |
| 42 | Supply and erection of Ceiling Fan 1200mm , 48\" with double ball bearing including flexible wire & petty material etc. for connections and testing . complete in all respects as appd. and desired by the Engineer in-charge at site.Makes:- Crompton Entrust 50Opel White/ ANCHOR:- XL code14067 WH/HAVELL\"S ES 50. (1X3=3) |
| 43 | Supply, installation,testing and commissioning of Air curtain units constructed withpowder coated super slim Air Curtain 6 ftlong fitted with 3 motors & 6 blowers with double speed in powder coated body wide single phase motor 2800 RPM power supply 220V /50HZ with Magnetic senserto run Air Cutain Automatically complete in all respect as per satisfaction of Engineer in charge .make Boss/ Avon/maxwell (1X3=3 |
| 44 | Air conditioning Providing&Installing&Erectionsplittypewallmountedairconditionercapacity 1.5tonne3StarMake:-Carrier,Hitachi, Daikin with 4.00KVAvoltagestablizer,forinstallingODunitsonterrace includinginletandoutletcoppertubeswithproperinsulationdrainage arrangement cable link betweenIDunitandODunitsstand forODunitand connectionofconcealingofCopperpipesanddrainagepipe withinbuildingand installing charges complete in all respectsincluding copper pipe & wire etc. (3X3=9) |
