Military Engineer Services-MES has published Certain Repair To Flooring, Joinery And Misc Building Work In Katra And Sanjichat Area Under Ge Nagrota. Submission Date for this Tender is 16-05-2022. Building Work Tenders in nagrota Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | BUILDING WORK NOTE:-THE ENTIRE WORK HAS TO CARRIED OUT ASON REQUIRED BASIS. ACCORDINGLY SITE WILL BE AVAILABLE IN PIECE MEAL WISE AND QUALITY OF WORK SHALL BE MONITERED PERSONALLY BY GE. THE WORK LIES IN KATRA , SANJICHAT VIP AREA. 2.SAFETY BELTS AND HELMET SHALL BE PROVIDED TO LABOURS WORKING IN HIGH RISE BUILING. 3.SAFETY BELTS SHALL BE ANCHORED TO AVOID ANY ACCIDENT. CONTRACTOR SHALL QUOTE THEIR RATES ACCORDINGLY |
| 2 | Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each . |
| 3 | Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) . |
| 4 | Taking shutter of any descriptionexc 1 Sqmand n exc 2 Sqm each in the same opening including taking down and easing and adjusting |
| 5 | Refixing shutter of any description n exc 1 Sqm each in the same opening including taking down and easing and adjusting |
| 6 | Refixing shutter of any descriptionexc 1 Sqmand n exc 2 Sqm each in the same opening including taking down and easing and adjusting |
| 7 | S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 125x60mm. |
| 8 | S&F Firstclass softwood for joinery work joints incl necessary fixing lugs,hings,lock strike plate complete al as specified of anysize complete all as specified and directed. |
| 9 | S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets. |
| 10 | S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc |
| 11 | S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface two coat of synthetic enamel paint before fixing.Steel window shall be conforming torelevant IS including taking down old window of any type. complete all as specified and directed by Engr-in-Charge. |
| 12 | S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limitedSintex,ecocel) |
| 13 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.(Make Rajshri Plastiwood limited ,Sintex, Ecocel) |
| 14 | 3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc all as specified. |
| 15 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc all as specified. |
| 16 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed. |
| 17 | S&F 75mm long aluminium anodised barrel tower bolt of extruded section and fixed. |
| 18 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 19 | S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed. |
| 20 | S&F 75mm mild steel butt hinges, medium weight, cold rolled and fixed. |
| 21 | S&F 150mm long aluminium handles cast type, anodised and fitted. |
| 22 | S&F 100mm long aluminium handles cast type, anodised and fitted. |
| 23 | S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete. |
| 24 | M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces. |
| 25 | S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc |
| 26 | Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete. |
| 27 | M&L rendering 15 mm thick on externalsurfaces of wall in cement mortar 1:4 allas specified and directed. |
| 28 | M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified. |
| 29 | M&L rendering 10 mm thick on internalsurfaces of wall in cement mortar 1:6 finished even & smooth without using extra cementas specified and directed. |
| 30 | M & L preparing new plastered surfaces of wallsand applying two coats of cement base paint. |
| 31 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying TWO coat of cement base paint on walls. after filling any hole with putty complete all as spd. |
| 32 | Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 1 to 2 mm thick wall care putty over a coat of primer on walls etc all as specified . |
| 33 | M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash . |
| 34 | Preparation of old plastered or unplastered surfaces of walls and applying 1 to 2mm thick applying One coats of oil emulsion distemper (of approved shade) upto three storey complete all as specified and directed. |
| 35 | Preparing of previously painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 36 | Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 37 | M & L for Acrylic Paint (Primium Quality) with 1st quality acrylic Paint (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. Two or more coats on new work complete all as specified. Note:-1. Nos of coat of acrylic paintshall be decided by GE on bases of smothness of surface. 2. NO extra payment shall be paid on extra coating for formation of smoothness of surfaces. |
| 38 | Demolition of ground floors and paving n exc 15 cm thickness(below or above ground floor) |
| 39 | M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement.. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises as directed |
| 41 | M&L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 42 | M & L Rendering 10 mm thick in cement mortar (1:3) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 43 | M&L for non skid cereamic coloured tiles 7to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match |
| 44 | M&L for joint free non skid cereamic coloured tiles 7to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed. |
| 45 | M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x7 mm thick, on vertical surfaces, such asdadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 46 | M&L for 20mm thick screed bed or bedding layer of cementmortar 1:4 for laying of floor finishes etc. |
| 47 | M & L 75mm thick PCC1:3:6Type B2 ( 40 mm graded aggregsate) as in subbase and pavings etc all as specified. |
| 48 | M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor. |
| 49 | Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr |
| 50 | Dismantling water tank and removing to stores exc250ltr n.exc 500ltr |
| 51 | S&F1000 litres 4 layered capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. Make:- Vectus,sintex |
| 52 | S&F500 litres 4 layered capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. Make:- Vectus,sintex |
| 53 | S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. |
| 54 | Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store. |
| 55 | S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors. |
| 56 | Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store. |
| 57 | S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors. |
| 58 | S&F vitreous china wash basin white of size 550x400mm incl waste coupling bracket and PVC waste pipe incl taking down old and as specified and as directed. MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 59 | S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium platedfancy typewith capstan heads, chromium plated, screwed down high pressure withor without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe. MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 60 | S&F in repair PVC valves less syphonic action type low level flushing cistern 10 ltr capacity with inlet ball valve, brackets all as specified. MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 61 | Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 62 | S & F in repair stop valve15mm bore cast copper alloy fancy type chromonium plated , cupscrewed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 63 | S & F in repair Angle valve15mm bore cast copper alloy fancy type chromonium plated , cupscrewed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 64 | S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe. MAKE:-PARRYWARE,JAQUAR SAMPLE HAS BEEN KEPT IN GE OFFICE. |
| 65 | S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs. |
| 66 | M & L 600mm x 450mm bevelled edge mirror of selected quallity glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as directed by engr in charge.(in reapirs) |
| 67 | Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings. |
| 68 | M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 69 | M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 70 | Dismantling wrought iron or mild steel works of any description not otherwise provided for. |
| 71 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. and similar work conforming to Fe-410-W Gde E-250; complete all as specified and as directed. |
| 72 | Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed. |
| 73 | Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified. |
| 74 | Brick work with sub-class `B" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 75 | Cleaning/clearing of sewage line (including manholes except 1st manhole) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting,descaling and de-chocking from drainwith combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed including taking of manhole cover and re-fixing the same after cleaning. |
| 76 | Dewatering/Desludging & cleaning of manholeof any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging complete all as specified and directed. |
| 77 | Taking out/Pumping out contaminated sewage water from septic tank/soakage well including inlet/outlet chamber after plugging incoming sewage line through combined high pressure water jetting cum suction (vaccum) type machine mounted on HCV Honey succer vehicle of capacity not less than 6000 ltrs each and facility of high pressure vaccum and removing off the same in the pit to a placet all as directed by Engineer-n-Charge. Note;One lorry unit will be considered for full load of 6000ltrs irrespective of taking out. |
| 78 | Desludging the solid sludge from septic tank, soakage well including inlet/outlet chamber, removing out all scum, silt reduce sludge (both organic/inorganic nature) after plugging the incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or area controlling authority complete all as specified and directed. |
| 79 | Cleaning of soil waste pipe (cast iron/PVC )75/100mm borelaid in groundany slope or gradient and depth 3 mtr by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc complete all as specified and directed by Engineer-in-Charge. |
| 80 | Cleaning/clearing of IWC/ EWC, gully trap /floor trap including CI pipe / PVC pipe upto first manholeby roding, taking out all residue including waste and testing by pouring water after cleaning etc complete all as specified and directed by Engr-in-Charge. (Note: Cleaning of PVC/CI pipe from first floor / ground floor embedded in floor or fixed to wall included in this item) complete all as specified and directed. |
| 81 | Cast iron oval access covers / inspection cover with bolts rubber gasket to make it water tight for 75mm/100mm bore CI fittings including taking out broken/ unserviceable cover with bolts etc and removing from site |
| 82 | S&F SFRC Manhole Cover of SIZE 1200X500X65mm thick with angle Iron Frame set in CM 1:4 Complete all As specified and as Directed. |
| 83 | Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil complete all as specified and directed. |
| 84 | Returning filling in including, spreading, leveling watering and well ramming in layer not exceeding 25cm in each layer complete all as specified and directed. |
| 85 | Removing excavated material not exceeding 50 M and depositing where directed at level not exceeding 1.5m above the starting pointing complete all as specified and directed. |
| 86 | Plain cement concrete 1:4:8 as in foundation type D-2 (using 40mm graded crushed stone aggregate) as in fdn filling or mass concrete complete all as specified. |
| 87 | Plain cement concrete 1:2:4 type B-1( using 20mm graded aggregate) as in benching, coping including watering slightly rounded or chamfered angles and throating including necessary form work complete all as specified. |
| 88 | Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles. |
| 89 | Brick work with sub class B (old size) brick straight or curved on plan exc 6 mmean radius in CM 1:4 complete all as specified. |
| 90 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed |
| 91 | TMT mild steel bars 10MMdia and over cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed 0.9 mm dia or securing with clips all as specified and directed. |
| 92 | Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover all as specified and set in CM 1:4 complete all as specified. |
| 93 | Rendering 15mm thick cement plaster in CM 1:4 on faces of brick work with or concrete WPC finished even and smooth without using extra cement all as specified ( WPC shall be measured and paid separately. ) |
| 94 | Supply only water proofing compound |
| 95 | Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as spd and directed by Engr in Charge. |
| 96 | Demolition and breaking up 200 mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as spd and directed by Engr in Charge. |
| 97 | Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified and as directed by Engr in charge. |
| 98 | Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 200mm bore pipe, complete all as specified and as directed by Engr in charge. |
| 99 | M & L for Salt -Glazed stoneware drain pipes 150 mm dia laind in trenches and jointed complete all as spd and directed |
| 100 | M & L for Salt -Glazed stoneware drain pipes 200 mm dia laind in trenches and jointed complete all as spd and directed |
| 101 | Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified. |
| 102 | S&F in repair Vitreous china squatting pan of "Orissa pattern"long pan size 580 x 440 mm white with integral foot rest incl‘P’ or ‘S’ trap and flush pipe etc complete incl making good the floor fixed in repairs. |
| 103 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white "P or S Trap" ,excluding flushing cistern & flush pipe . |
| 104 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle inluding brackets. |
| 105 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for like MH cover, bdrain pipe bed, hard standing etc complete all as specified. |
| 106 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 107 | M/L 50 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement.. |
| 108 | M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement.. |
| 109 | M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement.. |
| 110 | M & L 75mm thick PCC1:3:6Type B2 ( 40 mm graded aggregsate) as in subbase and pavings etc all as specified. |
| 111 | M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed |
| 112 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc all as specified. |
| 113 | M&L glazed ceramic colouredtiles 300x200x7mm / 450x300x7mmthick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed including and over over 10mm th backing coat platering in CM (1:4): |
| 114 | M&L chequered cement tiles concrete20cm x20cm x 25mm thic, set jointed in neat cement slurry in floor including 15mm thick screed bed or bedding layer of mortar 1:4for laying floor finishes etc all as specified.. |
| 115 | Non skid coloured ceramic tiles 7 to 8mm thick exc 0.11 sqm but n. exc 0.18 in floor etc and jointed with cement slurry and pointed with white or coloured cement to matchwith tiles overand incl 15mm thick screed bed in CM 1 : 6 complete all as specified. |
| 116 | Dismantling/taking down CI/PVC/AC pipes of exc 50mm dia with all including fittilngs complete all as specified and directed |
| 117 | S&F PVC (SWR)pipes single socketed in any length with rubber ring joints fixed towalls of 110mm bore size. |
| 118 | S&F PVC (SWR)pipes single socketed in any length with rubber ring joints laid in trenches or floorof 110mm bore size. |
| 119 | S&F PVC (SWR)pipes single socketed in any length with rubber ring joints fixed towalls of75 mm bore size. |
| 120 | S&F PVC (SWR)pipes single socketed in any length with rubber ring joints laid in trenches or floorof 75mm bore size. |
| 121 | S&F PVC (SWR) bends of 110mm bore. |
| 122 | S&F PVC (SWR) bends of 75 mm bore. |
| 123 | S&F PVC (SWR) Branch Piece double equal or unequal of 110mm bore. |
| 124 | S&F PVC (SWR) Branch Piece double equal or unequal of 75 mm bore. |
| 125 | S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 75mm bore. |
| 126 | S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of100mm bore. |
| 127 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 128 | Provided M & L for cleaning of all types ofblockage of Nahni traps/floor traps/bottle traps, blockages of WC"s, rain water pipes and similar works complete all as specified and directed by Engr-in-Charge. Note :- 1. Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM incl all Tools and Plants. Each labour shall intertain complaints everyday in working hours. 2.The supervisor of Contactor shall take all complaints from the Complaint Cell and do the all on same day and recovery of Rs 500/ per unattended complaint shall be recovered. 3.Futhermore, the feedback shall be given by the contractor/supervisor to concened JE from all aspect. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
