|
| 1 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 2 | Group C. |
| 3 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 4 | Group C. |
| 5 | Providing and installation of following type of Ultra slim decorative LED Batten with extruded aluminium heat sink, with antiglare polycarbonate diffuser and energy efficient constant current, integral electronic driver, suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, with two year warranty. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge. |
| 6 | LED Batten Light 20 Watt. |
| 7 | Providing and installation of following type of surface/recess mounting round/square LED Downlight finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required with Two years Warrenty. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge. |
| 8 | LED Downlight6 Watt. |
| 9 | LED Downlight 18 Watt. |
| 10 | Providing and installation of following type of Surface/Recess mounting square/round type LED Panel Light, powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required with two years warrenty. Make: Twinkle, GE, Philips or any other approved by Engineer-in-Charge. |
| 11 | LED Panel Light 36 Watt. (Size:- 2\" x 2\" feet) |
| 12 | Providing and installation of following type of LED Street light fitting made of pressure die cast aluminium housing powder coated with weather proof gasket ensuring IP-66 protection complete with all accessories including making connections, testing etc. as required with two years warrentyMake: Twinkle, Philips, GE or any other approved by Engineer-in-Charge. |
| 13 | LED Street Light 45 Watt |
| 14 | Supplying and erection of street light bracket made of G.I. pipe \"A\" class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- |
| 15 | 40 mm dia. G.I. pipe, heavy class |
| 16 | Providing and installation of following type of Fresh Air Ventilating fan Non-metallic range with lower Shutter of following sizes in the existing opening, including making the hole to suit the size of the fan, making good the damages, connections, testing and commissioning etc. as required Make: Havells, Khaitan, Bajaj, Crompton, Standard or any other approved by Engineer-in-Charge. |
| 17 | Fresh Air Ventilating fan 200 mm sweep |
| 18 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- |
| 19 | Exhaust Fan, Heavy duty, 300 mm sweep |
| 20 | Providing & fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required:- |
| 21 | Shutter for Exhaust Fan 12 Inch. |
| 22 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
| 23 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. |
| 24 | Earthing with copperearth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. |
| 25 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. |
| 26 | Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required. |
| 27 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 28 | 2x1.5 Sq. mm. |
| 29 | 2x6.0 Sq. mm. |
| 30 | 2x10 Sq. mm. |
| 31 | Wiring for circuit/sub-main with 4x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.1.5 Sq.mm.(4X1.5+2X1.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 32 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 33 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 34 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 35 | Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 36 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts gradeon surface etc. of the required size:- |
| 37 | Armoured cable 240 sq. mm (3.5 core) |
| 38 | Supplying and fixing of following size Jindal make G.I.Pipe Heavy Class direct in ground to be laid 1-meter below the ground level along with all accessories and also refilling the trench etc. of the required size : - |
| 39 | 65-mm ( 2½ \") dia. G.I. Pipe, Heavy class |
| 40 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- |
| 41 | Single pole 6 Amp. Cat-A. |
| 42 | Single pole 16 Amp. Cat-A. |
| 43 | Providing and fixing following rating, double pole (single phase & neutral) 10 KA breaking capacity 240 volts, Residual Current Breaker with Overcurrent Protection (RCBO), having a sensitivity current up to 300 miliampers, suitable for protection against leakage current, short circuit & over load, the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: L&T, Havells, Schneider or any other approved by Engineer-in-Charge. |
| 44 | Double Module RCBO 40 Amp. |
| 45 | Four Module RCBO 63 Amp. |
| 46 | Supplyingand fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- |
| 47 | Double door-8 way |
| 48 | Double door-12 way |
| 49 | Double door-16 way |
| 50 | Supplying & erection of wall/floor mounted MCCB 100 Amp. with bus-bar L.T. Panel approx. size: 850(H)x450(W)x250(D)mm, suitable for Indoor applications, having Main Incomer DN0-100D-100 Amp. 36KA (L&T) cat No.CM97919OOK2OG with thermal magnetic release O/L & S/C protection, Digital VAF Metering (L&T) cat No.WL411010OOOO showing voltage,currentfrequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., 200 Amp. AL Busbar, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 7032-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge. |
| 51 | Sub-Main Distribution Panel:- Providingand fixing floor/wall mounted L&T make SMDB PanelTN630D, O/G COMBI 4-Ways Panel of suitable dimensions made from 1.6 mm thick CRCA sheet, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels, interconnections, phosphatized and powder painted and LED phase indicating set, Digitial Metering complete with following accessories including earthing etc. as required : - |
| 52 | SMDB Panel Highlights: - |
| 53 | ?Compliance with latest standard - IEC 61439-3 |
| 54 | ?DEKRA and ASTA certified |
| 55 | ?Ingress protection - IP 44 |
| 56 | Provision for :- |
| 57 | Main MCCB Incomer 400 Amp. |
| 58 | Outgoing COMBI 4-way Sub-Incomer MCCB |
| 59 | Size: -1067mm(H) x 870mm(W) x 208.5mm(D) |
| 60 | Cat.No.-DA6AD1044CZZ0= 1 No. |
| 61 | Incoming Device: - |
| 62 | ?DN3-400D 3 Pole MCCB - 400A breaking capacity-50KA= 1 No. |
| 63 | Cat.No.- CM94005OOR1OG |
| 64 | Outgoing Device: - |
| 65 | ?DN0-100D 3 Pole MCCB - 100 A breaking capacity-36KA= 2 No. |
| 66 | Cat.No.- CM97893OOK2OG |
| 67 | ?DN1-250N 3 Pole MCCB - 200 A breaking capacity-36KA= 2 No. |
| 68 | Cat.No.- CM98608OONO |
| 69 | Metering, Bottom Cabling & Corner Box: - |
| 70 | ?Provision of 3 nos of 1-phase ammeter (96x96),1 nos of 1-phase voltmeter (96x96) with voltage selector switch & indicating lamps |
| 71 | Metering Extension Box [Cat.No.CM90439OOPO]= 1 No. |
| 72 | Bottom Cabling Box [Cat.No.CM91062OOOO]= 1 No. |
| 73 | Corner Box [Cat.No.CM91089OOOO]= 4 No. |
| 74 | Left Side Cabling Box [Cat.No.CM91120OOHO]= 1 No. |
| 75 | Right Side Cabling Box [Cat.No.CM91121OOHO] = 1 No. |
| 76 | 1Ph LED Ammeter Cl 1 [Cat.No.WL111010OOOO]= 3 No. |
| 77 | 1Ph LED Voltmeter Cl 1 [Cat.No.WL111010OOOO]= 1 No. |
| 78 | Voltmeter Selector Switche [Cat.No.61312 SAB13TDYR] = 1 No. |
| 79 | LED RED Indicator 22.5 mm [Cat.No.EILR240A] = 1 No. |
| 80 | LED Yellow Indicator 22.5 mm [Cat.No.EILY240A]= 1 No. |
| 81 | LED Blue Indicator 22.5 mm [Cat.No.EILB240A]= 1 No. |
| 82 | Supplying and erection offloor mounted fixed type metal frame work / boards of welded construction for switch gear mounting fabricated withM.S. angle iron (50 mm x 50 mm x 6 mm thick) of suitable dimensions with supporting members grouted 23 cm underground and frame work covered with 3mm thick M.S. sheet from top to a given height, with M.S. angle iron / 50mmx50mmx 6mm thick welded on the back and grouted into the back wallcomplete with painting and bonding to the existing earth as required:- |
