Military Engineer Services-MES has published Repairs Roofing Ceiling Flooring Tiling Plumbing Joineries Brick Work Certain Allied Works Md Otm Accn Of Mo Goa Noi Rajhans Swimming Pool And Ncs Periodical Services Externally Minor Repair Works Certain Bldgs Zone A Area Under Age Br-Ii Ge Gomantak. Submission Date for this Tender is 02-05-2022. Building Work Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete(Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) |
| 2 | M & L 75 mm thickPCC (1 : 3 : 6) type C2 (40mm graded aggregate) Cement concrete as in plinth protection. |
| 3 | M&L Plain Cement concrete Type B-2,1:2:4 (20mm graded aggregate), 100mm thick as inoffloorings.finished even and smooth and as directed. |
| 4 | M&l for glass dividing strips,3mm thick and width of strip in 38mm flooring of slab work etc. |
| 5 | Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement. |
| 6 | Dismantling floor, hearth or wall tilingalso in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 7 | M&L joint free Non Skid ceramic plain coloured tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately). |
| 8 | M&L glazed ceramic coloured tiles 350x250x 6 to7 mm thick/450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick cement plaster in cement mortar 1:3 complete all as specified and directed. |
| 9 | M&L Vitrified Ceramic tiles 9 to 10 mm thicklight shade (alsoin patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM1:4 complete all as specified and directed. |
| 10 | M&L for screed bed of 15mm thick in CM 1 : 6 for floor finishes. |
| 11 | M&L granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cementslurry and pointed with admisture of pigment to match the shade of granite stone including grinding and polishing complete. |
| 12 | M&L for chequrred cement concrete tiles 20cm x20cm x25mm thick set,jointedand pointed in neat cement slurry in floors . |
| 13 | Taking down wooden Chowkhats or framesnot exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified. |
| 14 | Taking down wooden Chowkhats or framesexc. 1.5 sq.m and n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified. |
| 15 | Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified. |
| 16 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as specified and directed . |
| 17 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge. |
| 18 | S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified. |
| 19 | S&F 2nd class H/W35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed |
| 20 | Supplied and fitted 2nd class H/W 35 mm Glazed andskeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats |
| 21 | S&Faluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh. |
| 22 | S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked). |
| 23 | S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked) |
| 24 | S & F 150 mm long Aluminium handles, cast type (ISI marked). |
| 25 | S & F250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 26 | Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified. |
| 27 | S/F Sheet glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed. |
| 28 | S/F figured glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed. |
| 29 | Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shaftsall as directed by Engr-in-Charge. |
| 30 | Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement. |
| 31 | Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:6 finished even and fair with out using extra cement. |
| 32 | M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed |
| 33 | Material & Labour for applying two coat of oil emulsion distemper on newlysurfaces of wall over a coat of primer over wall care putty including perparation of surface by complete removal of distempered and painted surfaces complete. |
| 34 | M&L for 3mm thickputty on ceilling surfaces and applying two coat of oil bond distemperover a coat of alkali- resistant priming paintcomplete all as specified and directed |
| 35 | M&L two coats of synthetic enemel paint on new wooden surface over a coat of pink primer incl necessery preparation. |
| 36 | Material and labour preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge. |
| 37 | S&F (in repairs)Vitreous china, white,Squatting pan ,"Orrisa" pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitngall as specified and details herebelow :- |
| 38 | S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices.approved by GE |
| 39 | S&F ( in repairs) Low level flushing cistern 10 ltr capacity moulded fromvirgin poly propylene Make Parry ware Brand Slimline Single flush includingprovision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. approved by GE |
| 40 | S&F in repair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified |
| 41 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern),white ( flushing cistern and flush pipe) complete all as specified |
| 42 | S&F Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding,rubbing and polishing complete |
| 43 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copperalloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Markedof other specified. approved by GE |
| 44 | S & F 15mm Chromium plated , fancy type,Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairapproved by GE |
| 45 | S & F 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed approved by GE |
| 46 | Supply and fixingTowel rail of stailess steel 600mm longwith and including chromium plated brass screws wooden / plasticcleatsapproved by GE |
| 47 | Material &Labourfor Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edgesand cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth. |
| 48 | Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 49 | Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed. |
| 50 | Supply and fixing 32 mm dia pipe ofpresure rating 6 Kg/Cm2 laid in floor or wall complete all as direted. |
| 51 | Supply and fixing for 100 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints and laid in trenchesor in wall. |
| 52 | M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mmmm complete all as specified and directed. |
| 53 | Cleaning and removing all scale and dirt, etc, removing all dust and dirt from PVC/RCC tanks exc 500 ltrs and n.exc 1000 ltrs from mouths of circulation pipes etc including letter writing for date of cleaning all as directed by Engr-in-Charge. |
| 54 | Dismantling of false ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets. |
| 55 | S&F for Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605 mm fixed with hangers 6mm dia, G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified. |
| 56 | S&FGypsum board of 12 mm thick for false ceiling 60cm x 60cm with staples on snap grid. |
| 57 | Dismantling water tanks exc 500 n exc 1000 ltr. capacity and removing. |
| 58 | S&F Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 1000 Ltrs. |
| 59 | S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) |
| 60 | S & F 20mm, fancy type CP, Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 61 | Supply and fixing Unionfor CPVC pipe of 20 mm outer diameter. |
| 62 | Supply and fixbrass elbow (3/4 X ½) |
| 63 | Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed. (Taking down of existing MS wind tie ( where required)to dismantle the mild steelsheet shall be deemed included in the unit rates) |
| 64 | S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa,and finished with resin coat on both surfacesas in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified. |
| 65 | S& F MS flat iron 25 x 3 mm as in hold fast for fixing if chowkats |
| 66 | M & L rolled section angle iron such as grills, gratings etc. with ends of bars frame work of water tanks and similar work conforming to FE 290 Gde -E-165 |
| 67 | Note :- (1) Rates of external treatment shall deemed to be inclusive of cleaning of bushes/ plants if any found on walls/ceiling/roof and same shall be removed with roots including applying anti growth chemical and making good surfaces.(2) Rate of external treatment include for 15 metre height of building above GL. |
| 68 | Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shaftsall as directed by Engr-in-Charge. |
| 69 | Demolition of stone/brick masonry wall built in cement mortar |
| 70 | M & L for precast cement concrete block masonry with solid blocks in cement concrete 1:3:6, type C1 using 20 mm graded crushed stone aggregate exc10 cm in width and set in CM 1:6 complete. |
| 71 | Material and labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping including necessary form work. |
| 72 | Material and Labour 15 mm thick plastering in CM 1:4, on other faces of stone masonry sufrace finished smooth and even, including mixed with water proofing compound as per manufacturers instructions)on wall of shafts all as directed by Engineer-n-Charge. Note : Water proofing compund measured and paid separately |
| 73 | Suppy only liquid water proofing(Compound) all as specified and directed. |
| 74 | M &L for applying two coats of anti fungal paint (Apex Ultima) over a coat of primer including preparation of new plastered surfaces. |
| 75 | M&L one coats of exterior emulsion paint ( Apex or weather coat) , white or tintedon old surfaces of wallsincluding prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified . |
| 76 | Material & Labour for preparation of old decorated plastered surfaces at walls including cornices, andapplying one coat of white wash on wall facia cornices etc completedall as specified and directed by Engr -in-charge. |
| 77 | All as per serialitem No 74 above on ceilings. |
| 78 | All as per item No 74 above but one coat of colour wash on walls/facia, sunshade etc complete. |
| 79 | Material and labour for one coat of oil bound distemper including preparation of old plastered surfaces complete all as specified and directed. |
| 80 | Material and labour for one coat of synthetic enamel paint on old painted steel surface of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge. |
| 81 | Material and labour preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge. |
| 82 | Complete removal of existance treatment of wall andapplying a layer of 3mm thickwall care putty in two coat on wall and applying two coat of oil bound distemper complete all as specified and directed |
| 83 | Complete removal of existance treatment of ceiling andapplying a layer of 3mm thickputty in two coat on ceilling surfaces and applying two coat of oil bond distember complete all as specified and directed |
| 84 | Material and labour Painting black circular base n.exc 40 cm dia for building Nos with one coat of synthetic enamel paint. |
| 85 | Material & labour for Writingbuilding Nos or figures (block, Roman, Italic or Indian) withsynthetic enamel paint height not exceeding30cm and width 2 cm over black painted circular base complete |
| 86 | M/L for one coats of floor paint Indigo or equivalent including perparation of old decorated surfaces by filling of cracks with crack seal etc applied with airless spraymachine. |
| 87 | M/L for one coat of synthetic enamel paint on concrete surfaces including preparation of old decorated surfaces in patterns as required for kerb stones etc applied with airless spray machine. |
| 88 | M&L for anti termite tratment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, all as directed by Engineer-in-charge. |
| 89 | M&L for anti termite tratment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as directed by Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
