Construction Of Open Gym At G.P. Bansda ( Pmksy 2.0 ) , Ps Bhinder CROSS TRAINER 8 Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Wide) x 1750mm. (Height), to enhance the mobility of upper and lower limbs and imp, Udaipur-Rajasthan

Construction Of Open Gym At G.P. Bansda ( Pmksy 2.0 ) , Ps Bhinder CROSS TRAINER 8 Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Wide) x 1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80N C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB C Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130 mmX310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz [3:23 pm, 25/02/2022] Parsoon: nuts and bolts shall be used for assembly. [3:32 pm, 25/02/2022] Parsoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/Berger/Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in-charge to fullfil. (The cement concrete and excavation work shall be paid separatly). 9 THAI-CHISPINNER (2 WHEEL) 10 Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder-elbow and hip-knee. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast O250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions OF Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no.3. (The cement concerete and excavation work shall be paid separately). 11 LEG PRESS 12 Providing and fixing of Leg Pres of size not less than 140mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80 NB C class welded with M.S. round base plate atleast O250mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless PIpe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plasticmaterial. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with PUre Polyester powder of Ackzonoble/Berger/Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole sturcture, under the directions of Engineer-in-charge fullfil the functional requirement. Theindicative Design/Photo is as per enclosed Photo no.5. (The cement concrete and excavation work shall be paid separately). 13 SIT UP BOARD DOUBLE 14 Providing and fixing of Sit up Board double of size not less than 1760mm (Length)x1140mm (Width)x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from C class GI pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Poto is as per enclosed Photo no.6. (The cement concrete and excavation work shall be paid separately). 15 CHEST PRESS 16 Providing and fixing of Chest Press o size not less than 2000mm (Length)x710mm (Width)x 2200 mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main sturctue frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atlest 250mm & 10 mm thick. The handle frame shall be made up from atleast 32NB C class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. sheet of size not less than 330mm x 300 mmx2mm thickness. Closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with PUre Polyester powders from Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately). 17 STANDING SEATING TWISTER 18 Providing and fixing of seating & standing Twister of size not less than 1700mm (Length) x 540mm (Width) x1250mm. (Height), to enhance flexibility of waist. Suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80 NB C class welded with M.S. sound base plate atleast O250mm & 10mm thick. The bottom frame of the seating & standing twister be atleast of 32NB, 50NB and 25NB shall be made from C class G.I. pipe. The handle frame of seating & standing twister of minimum 25NB & Foot resting frame of seating side shall be made from C class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of minimum size 300mm diameter and 10mm thickness. Closing caps shall be made up of high quality Fiber reinforced plastic material. High rensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure polyester powder of Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (The cement concrete and excavation work shall be paid separately). 19 CHEST CUM SHOULDER PRESS 20 Providing and fixing of Chest Press cum seated puller of size not less than 2000mm Length) X 710mm (Width) x 220mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80 NB C class welded with M.S. round base plate atleast O250mm & 10mm thick.The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. sheet of size 330 mmx300mmx2mm thickness. Closing caps shall be made up of high quality Fiber reinforce plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with pure polyester powders from Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately). 21 PUSH UP BARS 22 Providing and fixing of Push up bars of size not less than 1220mm (length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast O250mm & 10MM THICK. The handle frame minimum of 25NB shall be made from C class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powser coating shall be done with pure polyester powders of Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately).

INR 500 /-

INR 10840.0 /-

INR 5.42 Lakhs /-

Work Name : Construction of open gym at BANSDA Gram Panchayat PSBHINDER ( By PMKSY 2.0)

Sl. No.	Item Description
1	Earth work in excavation over area ( exceeding 30 cm in depth. 1.5 Mtr in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 m and lift up to 1.5 Mtr. Disposal earth to be leveled and neatly dressed.All kinds of soil
2	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
3	1:3:6       (i) 40 ???? ?????? ?????? ????? ?? ????? ?? ????? ?? ??? ?? ???? ??? ???? ?? ????? ???? ?? ??? ?????? ??? ???? ?????? ????? ?? ?? ??? 30 ??????? ?? ????? ?? ???????(ii) Vibratar and mixure ?? ????? ???? ???? ?? 3% ????? ?? ????
4	Random rubble stone masanory cement motor 1:6 ratio for foundation
5	brick masonery with cement motor 1:6 ratio
6	cement plaster 1:4 ratio
7	CROSS TRAINER
8	Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Wide) x 1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80N "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB "C" Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130 mmX310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz [3:23 pm, 25/02/2022] Parsoon: nuts and bolts shall be used for assembly. [3:32 pm, 25/02/2022] Parsoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/Berger/Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in-charge to fullfil. (The cement concrete and excavation work shall be paid separatly).
9	THAI-CHISPINNER (2 WHEEL)
10	Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder-elbow and hip-knee. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast O250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions OF Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no.3. (The cement concerete and excavation work shall be paid separately).
11	LEG PRESS
12	Providing and fixing of Leg Pres of size not less than 140mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80 NB "C" class welded with M.S. round base plate atleast O250mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless PIpe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plasticmaterial. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with PUre Polyester powder of Ackzonoble/Berger/Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole sturcture, under the directions of Engineer-in-charge fullfil the functional requirement. Theindicative Design/Photo is as per enclosed Photo no.5. (The cement concrete and excavation work shall be paid separately).
13	SIT UP BOARD DOUBLE
14	Providing and fixing of Sit up Board double of size not less than 1760mm (Length)x1140mm (Width)x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from "C" class GI pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Poto is as per enclosed Photo no.6. (The cement concrete and excavation work shall be paid separately).
15	CHEST PRESS
16	Providing and fixing of Chest Press o size not less than 2000mm (Length)x710mm (Width)x 2200 mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main sturctue frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atlest 250mm & 10 mm thick. The handle frame shall be made up from atleast 32NB "C" class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. sheet of size not less than 330mm x 300 mmx2mm thickness. Closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with PUre Polyester powders from Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately).
17	STANDING SEATING TWISTER
18	Providing and fixing of seating & standing Twister of size not less than 1700mm (Length) x 540mm (Width) x1250mm. (Height), to enhance flexibility of waist. Suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80 NB "C" class welded with M.S. sound base plate atleast O250mm & 10mm thick. The bottom frame of the seating & standing twister be atleast of 32NB, 50NB and 25NB shall be made from "C" class G.I. pipe. The handle frame of seating & standing twister of minimum 25NB & Foot resting frame of seating side shall be made from "C" class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of minimum size 300mm diameter and 10mm thickness. Closing caps shall be made up of high quality Fiber reinforced plastic material. High rensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure polyester powder of Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (The cement concrete and excavation work shall be paid separately).
19	CHEST CUM SHOULDER PRESS
20	Providing and fixing of Chest Press cum seated puller of size not less than 2000mm Length) X 710mm (Width) x 220mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80 NB "C" class welded with M.S. round base plate atleast O250mm & 10mm thick.The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. sheet of size 330 mmx300mmx2mm thickness. Closing caps shall be made up of high quality Fiber reinforce plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with pure polyester powders from Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately).
21	PUSH UP BARS
22	Providing and fixing of Push up bars of size not less than 1220mm (length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast O250mm & 10MM THICK. The handle frame minimum of 25NB shall be made from "C" class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powser coating shall be done with pure polyester powders of Ackzonoble/Berger/Nerolac paints with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately).