Public Works Department-PWD has published Construction Of Residential Quarter For Staff P.S Sv And Acb At Chamba Distt, Chamba ( Sh Building Portion, Ws And Si, Rain Water Harvesting System And Site Development Work ) . Submission Date for this Tender is 21-04-2022. Building Work Tenders in chamba Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual meansin all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification ofsoil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all leads and lifts by head-load, mechanicaltransportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 2 | Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification ofsoil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanicaltransportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 3 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including all taxes,GST,carriage ofmaterialwithin all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 4 | Centering and shuttering with steel plateincluding strutting, propping etceteraand removal of form work for retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etceteraas per the directions of the Engineer-in-charge includingall taxes, GST, carriage of material within all leads, liftsand other incidentals and further as per specification, approvedDrawing & Design. |
| 5 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 6 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work inBeams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floorincluding all taxes, GST, carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 7 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including all taxes,GST,carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 8 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landingincluding all taxes,GST,carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 9 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,in all heights of propping and centring below supporting floor to ceiling uptoany heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights includingalltaxes,GST,including carriageof materialandotherincidentals within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 10 | Providing and laying in position machine batchedand machine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work,in all work up to plinth level usingcement content not less than 360 KG/Cumincluding pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishingand reinforcement, including admixtures inrecommended proportions as per IS: 9103 toaccelerate, retard setting of concrete, improveworkability without impairing strength and durabilityas per direction of Engineer-in-charge. |
| 11 | Providing and laying in position machine batchedand machine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work,in all work aboveplinth level up tofloor V levelusing cement content not less than 360 KG/Cumincluding pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishingand reinforcement, including admixtures inrecommended proportions as per IS: 9103 toaccelerate, retard setting of concrete, improveworkability without impairing strength and durabilityas per direction of Engineer-in-charge. |
| 12 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand istofourgraded crushed stone agreegate 20 mm ( twentymillimetre) nominal size)curing completeexcluding the cost of form work in all work up to plinth levelincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 13 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size)curing completeexcluding the cost of form work in all work up to plinth levelincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 14 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10(one cement isto fivesand isto tengraded crushed stone agreegate 40 mm (forty millimetre) nominal size)curing completeexcluding the cost of form work in all work up to plinth levelincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 15 | Providing and layingmechanically mixed and vibrated plain cement concrete 1:4:8 (one cement istofour sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size)curing completeexcluding the cost of form worin retaining walls, return walls, walls (any thickness) includingattached pilasters, columns, piers, abutments,pillars, posts, struts, buttresses, string or lacingcourses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets, sunken floor etc.,up to floor five level, excluding the cost of centering, shuttering and finishingincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 16 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing completeincluding all taxes,GST ,carriage ofmaterial within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 17 | Providing & fixing 40 mm (forty millimetre) thicksecond classdeodar wood shutterwithpannel of 12 mm thick ( twelve millimetre)phenol bonded pre-laminated board (both side) particle board panneledISI marked No. IS-12823including black enamleiron butt hinges with necessary screws complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 18 | Steel reinforcement for R.C.C. work of TATA Tiscon/Sail 15342.80includingstraightening, cutting, bending, placing in position and binding all complete upto plinth level as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 19 | Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge includingalltaxes andcarriage of material within all leads and liftsand other incidentals. |
| 20 | Stone fillingdry hand packedtightlyinfloorcompleteincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 21 | Providing 100mm (Hundred millimeter) diametrePVCpipeof Supreme/ PhenolexWeep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etceteraextending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drainageface complete as per drawings and MORD technical specifications clause 614, 709, 1204.3.7 oras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 22 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)insuperstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 ( one cementisto six oarse sand)completeincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 23 | Half brick masonry with common burnt clay F.P.S.(non modular)bricks of class designation 7.5 ( seven point five)insuperstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 ( one cementistofour coarse sand)completeincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)infoundation and plinthin all shapes and sizes in Cement mortar 1:4 ( one cementisto fourcoarse sand)completeincludingall taxes and carriageofmaterial, as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 25 | Providing and fixing 30 mm ( thirty millimetre)thickpre--laminated factory made panel PVC doorshutter consisting of frame made out of M.S. tubesof 19( nineteen ) gauge thickness and size of 19 mm x 19 mm ( nineteeninto nineteenmillimetre) for styles and 15x15 mm ( fifteen into fifteen millimetre)for top & bottom rails.M.S. frame shall have a coat of steel primers ofapproved make and manufacture. M.S. framecovered with 5 mm( five millimetre) thick heat moulded PVC "C"channel of size 30 mm ( thirty millimetre)thickness, 70 mm ( seventy millimetre)width outof which 50 mm ( fifty millimetre)shall be flat and 20 mm ( twenty millimetre)shall betapered in 45 ( forty five)degree angle on both side formingstyles and 5 mm( five millimetre) thick, 95 mm ( ninety five millimetre)wide PVC sheet outof which 75mm( seventyfive millimetre) shall be flat and 20 mm ( twenty millimetre)shall betapered in 45 degree on the inner side to form topand bottom rail and 115 mm wide PVC sheet out ofwhich 75 mm shall be flat and20 mm shall be tapered on both sides to form lockrail. Top, bottom and lock rails shall be providedboth side of the panel. 10 mm (5 mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gapinsert for top rail & bottom rail, paneling of 5 mmthick both side PVC sheet to be fitted in the M.S.frame welded/ sealed to the styles & rails with 7mm (5 mm+2 mm) thick x 15 mm wide PVC sheetbeading on inner side, and joined together withsolventcement adhesive. An additional 5 mm thickPVC strip of 20 mm width is to be stuck on theinterior side of the "C" Channel using PVC solventadhesive etc. complete as per direction of Engineerin- charge, manufacturer"s specification & drawing. including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 26 | Providing and fixing 40 mm (fortymillimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five Gauge) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windowsincludingwith necessary screws completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 27 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 250 X 10 mm (two hundredfiftyinto ten millimetre)as directed bytheEngineer-in-Charge, including carriageof material within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 28 | Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundredinto ten millimetre)as directed bytheEngineer-in-Charge, including carriageof material within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 29 | Providing and fixing 300x16 mm ( three hundred into sixteenmillimetre) aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10( ten) as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. completeas directed bytheEngineer-in-Charge, including carriageof material within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 30 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shadewith necessary screws etcetera complete 125 mm (one hundred twentyfivemillimetre) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental and furtheras perspecification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 31 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shadewith necessary screws etcetera complete 100 mm (one hundred millimetre) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental and furtheras perspecification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 32 | Providing and fixing 150 mm ( one hundred millimetre)ISI marked oxidised M.S.single acting spring hinges with necessary screwsetc. completeasdirected bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental and furtheras perspecification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 33 | Providing and fixing 19mm (nineteenmillimetre) thick commercial board water proofboard of Uniply/Greenply/Kitply/Centuary ply including shelves and 6 mm ( six millimetre) thick plyboth side of cupboard. All cut portion of shutter shall have6 mm ( six millimetre) thickhard wood edging. Theshutter from out sideshallto be finished with 1 mm (one millimetre) thick lamination of Centuary ply/Greenply/Action Tesai/c fixing with nickel plated piano hinges with screws etcetera completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 34 | Providing and fixing 250 mm ( two hundredmillimetre)oxidized hooks and eyes completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 35 | Providing and fixing aluminium die cast bodytubular type universal hydraulic door closer (havingbrand logo with ISI, IS : 3564, embossed on thebody, door weight upto 35 kg ( thirty kilogram)and door width upto700 mm ( sevenhundred millimetre) , with necessary accessories and screwsetcetera complete oras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 36 | Providing and fixingtwin rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, withnecessary screws etceteracompletecomplete oras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 37 | Providing and fixing 25 mm ( twentyfivemillimetre)diachromium plated brassstainlesscurtain rod having wall thickness of 1.25mm( one point two five) with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherevernecessary completeoras directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 38 | Providing and fixing M.S. plain grills 10x10mm (ten intotenmillimetre)squareor roundbarsin combinationof20x4mm (twentyintofourmillimetre)M.S.flat as per detailof required pattern inframes of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 39 | Providing and laying vitrified floor tiles double chargedsize of600 x 600 mm ( six hundredinto six hundred millimetre)of Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thickcement mortar 1:4( onecementisto fourcoarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement andmatching pigments etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 40 | Providing andfixingnon slipperyCeramicfloor tiles ofKazaria/ Somany/ jonhson/Orient-Bell ofsize 300x300 mm ( three hundredinto three hundred )(thickness to be specified by themanufacturer), of 1st quality conforming to IS :15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laidon 20 mm ( twenty millimetre)thick bed of cement mortar 1:4 (oneCementisto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including pointing the jointswith white cement and matching pigments etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 41 | Providing and laying19mm (nineteen millimetre) thick Polished Granite stone in kitchenworktop in required design and patterns, in linear as well ascurvilinear portions of the building all complete asper the architectural drawings with 18 mm( eighteen millimetre) thick stone slab over 20 mm( twenty millimetre) (average) thick base ofcement mortar 1:4 ( onecement isto four coarse sand) laidand jointed with cement slurry and pointing with white cement slurry admixed with pigment ofmatching shade including rubbing , curing andpolishing etcetera all complete as specified and asdirected by the Engineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 42 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6(one cement isto threesand istosixgraded crushed stone agreegate 40 mm (forty millimetre) nominal size)curing completeexcluding the cost of form work in all work up to plinth levelincludingall taxes,GST, carriageofmaterial, within all leads, liftsand other incidentals as per the direction of the Engineer-in-chargeand as per specification, approvedDrawing & Design complete. |
| 43 | Providing and laying Vitrified tiles in skirtingof Rak/Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thickcement mortar 1:4( onecementisto fourcoarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement andmatching pigments etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 44 | Providing and fixing 1st quality ceramic glazedtilesof Rak/Kazaria/ Somany/ jonhson/Orient-Bellconforming to IS : 15622 (thickness to bespecified by the manufacturer ) of approved makein all colours, shades except burgundy, bottlegreen, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over12 mm ( twelve millimetre)thick bed of cement Mortar 1:3 (onecement isto three coarse sand) and jointing with grey cement slurry @3.3kg per sqm( three point three kilogram/ per square metre)including pointing in white cement mixed with pigment of matching shade completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 45 | Providing & laying25 mm ( twenty five millimetre) Kota stonesingle slab flooringin treads of stepsor riser ofstepshavingsemi/ roundnosing over 20 mm ( twenty millimetre)(average) thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab, with baseof cement mortar 1 : 4 ( one cement fourcoarse sand) including rubbing and polishing completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 46 | Providing & laying 40 mm ( forty millimetre)thicklabrador designseriesin rampflooringover 20 mm ( twenty millimetre)(average) thick base of cement mortar 1:5 ( onecementisto five coarse sand) with joints 3 mm( three millimetre) thick, sidebuttered with cement mortar 1:2 (onecement is to twostonedust) admixed with pigment to match the shade ofstone and pointing with same mortarcompleteas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 47 | Providing and laying 60mm ( sixty millimetre)thick cement concreteinterlocking paver block of M -30 ( M-thirty) grade made by block making machine with strongvibratory compaction, of approved size, design &shape, laid in required colour and pattern over andincluding 50mm ( fifty millimetre)thick compacted bed of coarsesand, filling the joints with line sand etceteraall complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 48 | Providing and fixingISMC 75 x 40 mm (seventy five into forty millimetre) angle iron frames for doors,windows and ventilators of mild steel Angle sectionsof size 35x35x5 mm, (thirty five into thirty five intofive millimetre)joints mitred and welded byangle iron 35x35x5 mm (thirty five into thirty five intofive millimetre)or 35x 5 mm ( thirty five into five millimetre)flat pieces tothe existing T-iron frame or to the wall with dashfastener, including fixing of necessary butt hingesand screws and applying a priming coat ofapproved steel primer, all complete as per thedirection of Engineer-In-chargeincluding carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 49 | Steel work riveted, bolted or welded inbuilt up section, of Tata/Sailtrusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer allcompleteas per thedirection of Engineer-In-chargeincluding carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 50 | 40 mm (forty millimetre)thick2nd classdeodarwoodglazed5mm (five millimetre) thick ofModi guards shutterfor doors windows andclerestory windowsIncluding black enamelled iron butt hinges withnecessary screwscompleteas per thedirection of Engineer-In-chargeincluding carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 51 | Providing & fising 40mm (forty mimmimetre ) 2nd class deodar woodindoors, windows and clerestory window shuttersincluding hinges completeas per thedirection of Engineer-In-chargeincluding carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 52 | Providing and fixingMShandrailmade ofM.S hollowsquare / rectangularpipeof14 to 16( fourteen to sixteen )gaugeM.S flat / M.Ssolidsquarebars19mm x 19mm( nineteeninto nineteen millimetre)balusterand balcony railingcompletein all respectas perapproveddrawing , design , specificationand directionby the Engineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 53 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating ofTATADurashine / SAIL/ RELIANCE/ ZINDALSTEELincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as requiredincludingalltaxes,carriage of material within all leads and lifts and as per specificationoras perthe direction of the engineer-in-chief and other incidentals. |
| 54 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coatingandback coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating of TATADurashine / SAIL/ RELIANCE/ ZINDALSTEELincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as requiredas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 55 | Providing and fixing valleys 90cm (ninety centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty microns) over 5 microns (five microns) primer coatingandback coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia metre with prepainted limpet washers complete with all accesories as requiredas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 56 | Providing and fixing M.S.B.P.sheet 2 mm( two milimetre )thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 57 | Providing and fixing 25 x 30 cm ( twenty five into thirty centimetre) wide, 45 cm ( forty fivecentimetre)overallsemi-circular plain G.S. sheet gutter with iron brackets 40x3mm ( forty intothree millimetre)size, bolts, nuts and washersetceteraincluding making necessary connections withrain water pipes completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 58 | Applying priming coatofover new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 59 | Painting two or more coats of Asian/Nerolac (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 60 | Painting two or more coatof Asian / nerolac (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter withenamledpaintother than whiteas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 61 | 6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( onecement isto three sand) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 62 | Finishing with Epoxy paint (two or more coats)on steel work at all locations prepared and applied as per manufacturer specifications including appropriate priming coat, poreparation of surface etcetera complete as as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 63 | Finishing with Epoxy paint (two or more coats)onconcretework at all locations prepared and applied as per manufacturer specifications including appropriate priming coat, poreparation of surface etcetera complete as as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 64 | 15mm (Fifteenmillimetre) cement plaster in single coat on roughside of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (onecement isto sixsand) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 65 | 15mm (Fifteenmillimetre) cement plaster in single coat on fair side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (onecement isto sixsand) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 66 | 15mm (fifteen millimetre) thick cement plaster in single coat on fair sideof brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:4 (one cement isto four sand)as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 67 | 20mm (twentymillimetre) thick cement plaster with pattern in plaster single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:4 (one cement isto foursand) as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 68 | Distempering (two coats) withoil bound washable distemper ofapproved brand and manufactureof and of required shade ofundecorated wall surfaces togive an even shade over andincluding a priming coat withAlkali-resistance primer of approved brand and manufactureafter thoroughly brushing thesurface free from mortar dropping and other foreignmatter and also includingpreparing the surface even andsand papered smoothas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 69 | Finishing walls with Apexweather proof exterior grade emulsion ofAsian paint or exterioremulsionofNAROLACSURKSHAasper approved shade on undecorated wall surface (two or morecoats) to give an even shade and final finish after thoroughly cleaning the surface to removeall dirt, dust and other foreign matter etc. including sand paper smooth complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 70 | Applying Birla white/J.Kwall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matterfinishto the surface complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 71 | Providingplinthprotectionwith40 mm ( forty millimetre)thickinterlockingpaver blockof NTCwith 23 cm ( twentythree centimetre)diahalf roundedRCC pipefor drainagepurposefixed over 10 cm ( ten cenetimetre) thickcementconcrete1:4:8 ( one cementisto tofourcourse sandandeight istostone aggregate)beddingand haunchingof pipeas perarchitecturaldrawing, design andspecificationscomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 72 | Providing and fixing110 mm ( one hundred ten millimetre diametre) on wall face unplasticised RigidsinglesocketedPVC rain water pipesof Supreme/ Finolex/ Prince conforming to IS : 13592Type A, including jointing with seal ring conformingto IS : 5382, leaving 10 mm ( ten millimetre)gap for thermal expansioncomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 73 | Providing and fixing110 mm (one hundred ten millimetre diametre) PVCclampsof approved design to unplasticised - PVC rainwater pipes by means of 50x50x50 ( fifty into fifty into fifty millimetre)mm hard woodplugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cementmortar 1:4 ( onecementisto fourcoarse sand) and makinggood the wall etceteracompleteas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 74 | Providing and fixing factory made P.V.C. doorframe of size 50x47 mm ( fiftyinto forty seven millimetre)with awall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet, mitred at corners and joined with 2 Nos of150 mm long brackets of 15x15 mm M.S. squaretube, the vertical door frame profiles to bereinforced with 19x19 mm M.S. square tube of 19gauge, EPDM rubber gasket weather seal to beprovided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer’sspecification and direction of Engineer-in-Chargeincluding carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 75 | Providingandfixingaluminiumcompositepanel ceiling600 x 600 x 15 mm ( six hundredinto six hundredinto fifteenmillimetre)includingprepaintedGIchannel@ 600 mm C/C( six hundredmillimetrecentre to centre)as per detail design, drawingand specificationandasdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 76 | Providing and laying water proofing treatment insunken portion of WCs, bathroom etc., by applyingcement slurry mixed with water proofing cementcompound consisting of applying first layer of slurry of cement @ 0.488 kg/sqm (zero pointfoureight eight kilogram/per square metre) mixed with water proofing cement compound @0.253 kg/ sqm.( zero pointtwo fivethree kilogram per square metre) This layer will be allowed to air cure for 4 ( four) hours.Second layer of slurry of cement@ 0.242 kg/sqm( zero pointtwo four twokilogrma/ per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm ( zero pointonetwo six kilogram per square metre) . This layer will be allowed to air cure for 4 (four) hours followed with water curing for 48( forty eight) hours. The rate includes preparation of surface, treatmentand sealing ofall joints, corners, junctions of pipes and masonrywith polymer mixed slurry.) andasdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 77 | Providing and laying damp-proof course 100mm(one hundred millimetre) thick with cement concrete 1:2:4 (one cementistotwocoarse sand(zone-III)isto four graded stone aggregate 20mm ( twenty millimetre)nominal size). complete asdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 78 | Providing & applying a coat of residual petroleumbitumen of grade of VG-10 (ten)of approved qualityusing 1.7kg( one pointsevenkilogrma ) per square metre on damp proof courseafter cleaning the surface with brushes and finallywith apiece of cloth lightly soaked in kerosene oilcomplete asdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 79 | Providing and fixing110 mm ( one hundred ten millimetre)diaPVCbend of Supreme/ Finolex/ Prince makeon wall face unplasticised for unplasticisedRigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm( ten millimetre) gap forthermal expansioncomplete asdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 80 | Providing and fixing110 mm ( one hundred ten millimetre)diaPVC shoeof Supreme/ Finolex/ Prince makeon wall face unplasticised for unplasticisedRigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm( ten millimetre) gap forthermal expansioncomplete asdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 81 | Providing and fixing 8 mm ( eightmillimetre)thick cement bonded particle boardceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) asdirectedby theEngineer-in-Charge including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 82 | Providing and fixing flashing 38cm ( thirty eight centimetre)overall with 0.60mm ( point sixzeromilimetre)thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns ( twenty microns)over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5( five) microns primer coatingincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as per specification, approved drawings, design as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rateis including octroi, royality, Malkana, toll tax, sale tax, GST or anyother taxes imposed by the Government. |
| 83 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trussesandtrussespurlinsin buildingasper approved drawing, design & specification or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government . |
| 84 | Providing and fixing hard drawn steel wire fabric 75x25mm (seventy five into twenty five millimetre) mesh of weight not less than 7.75 Kg/sqm( seven point seven five kilogram per square metre) to window frame etcetera including 62x19mm (sixty two into nineteen millimetre)beading of second class teak wood and priming coat with approved steel primer all completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government. |
| 85 | Providing and fixingwhite vitreous china pedestal type water closet (European type W.C. pan)ofHindware / Cera /jaquar with seat and lid, 10( ten) litres low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 with all fitting and fixtures complete including cutting and making good the walls and floor wherever required. WC pan with ISI marked white solid plastic seat and lid.completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government. |
| 86 | Providing and fixing White vitreous China wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) of Hindware/Cerawith a single hole with CI bracket, 15mm ( fifteen millimetre)CP brass pillar tap, 32mm( thirtytwo millimetre) CP brasswaste of heavy dutymake of ISImarked IS No. 8931 & 8934 standard pattern fitting including painting of fitting and brackets,cutting and making good the walls wherever required. |
| 87 | Providing and fixing vitreous China pedestal of Hindware/Cera for wash basin complete recessedat the back forwash basincomplete recessed at the back for the reception of pipes and fittings as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 88 | Providing and fixing stainless steelKitchen sinkof Diamond/ Unik without drain board 610x510mm( six hundred ten into five hundredtenmillimetre) bowl depth 200mm ( two hundred millimetre)of ISI 304 (18/8)as per IS: 13983 with CI brackets and stainless steel plug 40mm( forty millimetre)including painting of fitting and brackets,cutting and making good the walls wherever required or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 89 | Providing and fixing8mm ( eight millimetre)dia CP/SS Jet with flexible tube upto 1.00 (one ) metre long with SS triangular plate to european type W.C. ofquality and make as approved by the Engineer-in-Chargeincluding carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 90 | Providing and fixing15mm (fifteen millimetre)nominal diaCP brass single lever telephonic wall mixerofHindware/Cera/Jaquar including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 91 | Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 92 | Providing and fixing100 mm( one hundred millimetre) dia C.P. steel grating for gully trap ofheavy dutymakes ISI marked IS No.8931 & 8934or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 93 | Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 94 | Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five millimetre)glass shelfof Hindware/ Cera/ jaquar with sdges round off supported on anodized aluminium angle frame with C.P. brass brackets and gaurd rail complete fixed with 40mm long screws rawl plugs etc. complete.as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 95 | Providing and fixing 110mm dia ( one hundredtenmillimetre)rigid high pressurePVCspigot and socketedsoil waste and ventilating pipesconforming to IS: 13592 Type A including jointing with sealringconforming to IS:5382completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 96 | Providing and fixing75 mm dia (seventy five millimetre)rigid high pressurePVCspigot and socketedsoil waste and ventilating pipesconforming to IS: 13592 Type A including jointing with sealringconforming to IS:5382completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 97 | Providingand fixingPVCcowl of supreme/finolex make 75 mm ( seventy fivemillimetre) diametreasper approved drawing, design & specification or as directed bytheEngineer-in-Charge, including carriageof materialwithin all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax, sale tax,GST or anyother taxes imposed by the Government. |
| 98 | Providing and fixingPVC 110x90mm (one hundred tenintoninety millimetre)dia floor trap ISI Marked ofselfcleaning designincluding fixingwith approved adhsive, costofcuttingmakingthewallsandfloors etc. completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 99 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approvedadhesive110 mm (one hundred tenmillimetre) dia as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 100 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approvedadhesive75 mm ( seventy five millimetre) dia as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 101 | Providing and fixing 110mm ( onehundredten millimetre)dia PVC door bend with oval access door, insertion rubber washer 3mm( three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 102 | Providing and fixing 75 mm (seventy five millimetre)dia PVC door bend with oval access door, insertion rubber washer 3mm( three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etceteracomplete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 103 | Providing and fixingCP heavy dutymakes ISI marked IS No. 8931 & 8934liquid soap container 109mm ( one hundred nine )wide 125mm ( one hundred twenty five millimetre)high and 112mm( onehundred twelve millimetre) distance from wall of standard shape with bracket of the same material with snap fitting of approved quality and colour weighing not less than 105 gms ( one hundred five grams) complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 104 | Providing and fixing CP heavy dutymakes ISI marked IS No. 8931 & 8934PTMT450mm( four hundred fifty millimetre) long towel rail with total length645mm ( six hundred forty five millimetre)width 78mm( seventy eight millimetre) wide and effective height of 88mm( eighty eight millimetre) weighing not less than 170gms ( one hundred seventy grams)complete with brackets fixed to wooden cleat with CP brass screws with concealed fitting arrangement of approved quality and colour complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 105 | Providing and fixing15mm ( fifteenmillimetre)nominal boreG.I. pipe complete with G.I. fitting and clamps including cutting and making good the walls etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 106 | Providing and fixing 15mm ( fifteenmillimetre)nominal boreG.I. pipe complete with G.I. fitting including trenching and refilling etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 107 | Making connection of25 to 40mm ( twenty five to forty millimetre) nominal boreG.I. distribution branch withG.I. and fixing tee including cutting and threading the pipe etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 108 | Providing and fixing15mm ( fifteenmillimetre)nominal bore C.P. brass bibcockof(heavy duty) akes ISI marked IS No. 8931 & 8934approved quality conforming to IS: 8931 or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 109 | Providing and fixing15mm ( fifteenmillimetre)nominal bore C.P. brass stop cock (concealed) of (heavy duty) makes ISI marked IS No. 8931 & 8934 or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 110 | Providing and fixing15mm ( fifteenmillimetre)nominal boreball valve (brass) of approved quality High or low pressure with plastic floats completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 111 | Providing and fixing15mm ( fifteenmillimetre)nominal bore unplasticised PVC connection pipe with brass union completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 112 | Providing and fixing C.P. shower rose with 15 or 20mm ( fifteenor twenty millimetre)inlet 100mm ( one hundred millimetre)diameter of(heavy duty) akes ISI marked IS No. 8931 & 8934approved quality conforming to IS: 8931or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 113 | Providing and fixing 1620 (20 mm OD) Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite PressurePipesconforming to IS - 15450, U.V. stabilizedwith carbon black having thermal stability for hot &cold water supply, capable to withstand temperature up to 80°C, including all special fittings ofcomposite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one metre)spacing. This includes the costs ofcutting chases and including testing of jointsConcealed work, including cutting chases andmaking good the wall etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 114 | Providing and fixing 2025 (25 mm OD)Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite PressurePipesconforming to IS - 15450, U.V. stabilizedwith carbon black having thermal stability for hot &cold water supply, capable to withstand temperature up to 80°C, including all special fittings ofcomposite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one metre)spacing. This includes the costs ofcutting chases and including testing of jointsConcealed work, including cutting chases andmaking good the wall etcetera complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 115 | Providing and fixing15mm (fifteen millimetre) nominal borebrassvalve ( horizontal plunger)type high pressure withpolythene plash floatsof of (heavy duty) makes ISI marked IS No. 8931 & 8934 or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 116 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but woithout fitting and base support for tank completeas directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government . |
| 117 | Providing and fixing15mm (fifteen millimetre) nominal boreCP brass angle valvefor basin mixer and geyser pointsof (heavy duty) makes ISI marked IS No. 8931 & 8934 or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 118 | Constructing brick masonry manhole in cement mortar 1:4 (onecement isto fourcoarse sand) with RCC top slab with 1:1.5:3 mix ( onecement isto one point fivecoarse sand (zone-III) isto three graded stone aggregate 20mm ( twenty millimetre)nominal size), foundation concrete 1:4:8 mix ( one cementisto four coarse sand isto eight graded stone aggregate 40mm ( forty millimetre)nominal size), inside plastering 12mm( twelve millimetre) thick with cement mortar 1:3 ( onecementisto threecoarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (onecement isto two coarse sand isto fourgraded stone aggregate 20mm( twenty millimetre) nominal size) finished with a floating coat of neat cement as per standard design. Inside size 90x80 cmx45 cm. ( ninety into eighty into forty five centimetre)deep including cover with frame (light duty) 455x610 mm ( four hundredfifty five into six hundredten milimetre)internal dimension, total weight of cover and frame to be not less than 38Kg. ( thirty eight kilogram)(weight of cover 23Kg ( twenty three kilogram) and weight of frame 15 Kg. ( fifteen kilogram) with common burnt clay FPS (non modular) bricks of class designation 7.5.or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 119 | Constructing brick masonry manhole in cement mortar 1:4 (onecement isto fourcoarse sand) with RCC top slab with 1:1.5:3 mix ( onecement isto one point fivecoarse sand (zone-III) isto three graded stone aggregate 20mm ( twenty millimetre)nominal size), foundation concrete 1:4:8 mix ( one cementisto four coarse sand isto eight graded stone aggregate 40mm ( forty millimetre)nominal size), inside plastering 12mm( twelve millimetre) thick with cement mortar 1:3 ( onecementisto threecoarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (onecement isto two coarse sand isto fourgraded stone aggregate 20mm( twenty millimetre) nominal size) finished with a floating coat of neat cement as per standard design Inside size 120x90 x 90 cm deep ( one hundredtwenty into ninetyinto ninety centimetre) including C.I. cover with frame (medium duty) 500mm ( five hundred millimetre)internal diameter, total weight of cover andframe to be not less than 116 kg( one hundred sixteen kilogram) (weight of cover58 kg ( fifty eight kilogram) and weightof frame 58 kg) ( fifty eight kilogram)with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 120 | Excavatingtrenches of required width for pipes, cables, etc. including excavation for sockets, dressing of sides, ramming of bottom, depth upto 1.5( one point five)metre including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cm ( twenty centimetre)in depth including consolidating each deposited layer by ramming, watering etceteraand disposing of surplus excavated soil as directed within a lead of 50 ( fifty) metresPipes and cables exceeding 80mm( eightymillimetre) dia but not exceeding 300mm( three hundredmillimetre) diametreor as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax,sale tax, GST or anyother taxes imposed by the Government . |
| 121 | Constructing brick masonarychamber for underground C.I ( cast iron)inspection chambers and bendswith commonburnt clay buildingbricks in cementmortar 1:5 ( onecement is to five sand)includingcoverwith frame (lightduty)size455mm x 610 mm internal diamention total weightof coverwith frmaeto benot less than38 KG ( thirty eight kilogram) ( weight of cover 23 kg and weight of frame 15 kg) RCC topslabwith 1:2:4 mixfoundation concrete1:5:10 inside plaster 15 mm thickwith cementmortar 1:3 witha floating coatof neat cementon wallsand bedconcreteetcteracompleteasper approved drawing, design & specification or as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate isincluding octroi, royality, Malkana, toll tax,sale tax, GST or anyother taxes imposed by the Government . |
| 122 | Providing and fixing15mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality High or low pressure with plastic floats complete complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 123 | Providing andfixing20 mm (twentymillimetre) nominal bore G.I. pipe complete with G.I. fitting and clamps including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
| 124 | Providing and fixing in position water lifting pump (toollu pump) having 3.00 ( three) horse power capacity of Kirloskar or equivilent make ISI mark including all necessary fitting required at site complete in all respect as directed bytheEngineer-in-Charge, including carriageof materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or anyother taxes imposed by the Government. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
