Haryana Police Housing Corporation Limited has published Construction Of 2 Barracks In Distt. Jail Rohtak Construction Of 2 Barracks In Distt. Jail Rohtak. Submission Date for this Tender is 25-04-2022. Barrack Tenders in rohtak Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Apr-2022 | Corrigendum_Date | Date | 25-04-2022 |
| Sl. No. | Item Description |
| 1 | CIVIL WORK (HSR Edition 2021) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(HSR 4.14) |
| 3 | All kinds of soil. (HSR 4.14.1) |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. HSR 4.32 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:(HSR 6.1) |
| 6 | 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size) HSR 6.1.1 1. |
| 7 | 1:4:8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) (HSR 6.1.6) |
| 8 | 1:5:10 (1 cement : 5 coarse sand (zone-Ill): 10 graded stone aggregate 40 mm nominal size) (6.1.7) |
| 9 | Providing and laying damp-proof course with cement concrete 1: 1.5:3 (1 cement : 1.5 coarse sand (zone-Ill): 3 graded stone aggregate 20mm nominal size). HSR 6.9 6.9.240 mm thick |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:(HSR 6.14) |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill): 3 cum graded stone aggregate 20 mm nominal size) (HSR 6.14.1) |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : (HSR 6.15) |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 cum graded stone aggregate 20 mm nominal size) (HSR 6.15.1) |
| 14 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1 ½ coarse sand(zone-111) : 3 graded stone aggregate 20mm nominal size). (HSR 6.21) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for (HSR 6.30)Suspended floors, roofs, landings, balconies (HSR 6.30.3) |
| 16 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level. HSR 6.33 Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. |
| 17 | 6.33.6 - Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Brick work with common burnt clay non-modular bricks of classdesignation 10.5 in foundation and plinth in: (HSR 7.21) |
| 19 | Cement mortar 1:4 (1 cement: 4 coarse sand)(HSR 7.21.1) |
| 20 | Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :(HSR 7.22) |
| 21 | Cement mortar 1:4 (1 cement: 4 coarse sand)(HSR 7.22.1) |
| 22 | Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. (HSR 7.28) |
| 23 | Cement mortar 1 :4 ( 1 cement :4 coarse sand(HSR 7.28.2) |
| 24 | Extra for making tapered surface of brick masonry. HSR 7.59 |
| 25 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. HSR 8.29 |
| 26 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 Sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete(HSR 9.10) |
| 27 | With residual type petroleum bitumen of grade VG -1 O (HSR 9.10.1) |
| 28 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1: 3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat (HSR 9.11) |
| 29 | With common burnt clay non-modular brick tile of class designation 10 (HSR 9.11.1) |
| 30 | Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : (HSR 9.17) |
| 31 | In 75x75 mm deep chase (HSR 9.17.1) |
| 32 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. HSR 9.18 |
| 33 | Supplying and fixing in position 60 cm long G.I. pipe class "B" spouts in chajjas and cantilevers. HSR 9.55 |
| 34 | 9.55.550 mm internal dia |
| 35 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (HSR 9.57) |
| 36 | 110 mm diameter (HSR 9.57.2) |
| 37 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion. (HSR 9.58) |
| 38 | Bend 87.5° (HSR 9.58.5) |
| 39 | 110 mm bend (HSR 9.58.5.2) |
| 40 | Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to be laid below the topping (HSR 10.4) |
| 41 | Providing and laying of conglomerate floor 50mm thick cement concrete topping 1 :2:4. HSR 10.7 |
| 42 | Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete: HSR 10.1910.19.6Ordinary cement without any pigment |
| 43 | Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :HSR 10.2510.25.1.6 Ordinary cement without any pigment |
| 44 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing comple te with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : (HSR 10.37)25 mm thick (HSR 10.37.1) |
| 45 | Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, sqm 365 571 936 skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(HSR 10.38) |
| 46 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.62) |
| 47 | Providing and fixing P .V.C . strips, 40mm wide in floors. HSR 10.2710.87.14 mm thick |
| 48 | 1O mm thick cement plaster. HSR 11.4 |
| 49 | 11.4.2 1 :3 (1 cement: 3 fine sand) |
| 50 | 12 mm cement plaster of mix : HSR 11.5.31 :4 (1 cement: 4 fine sand) |
| 51 | 11.5.4 1 :6 (1 cement: 6 fine sand) |
| 52 | 15 mm cement plaster on the rough side of single or half brick wall of mix : HSR 11.6 |
| 53 | 11.6.2 1 :6 (1 cement: 6 fine sand) |
| 54 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58 |
| 55 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: (HSR 11.67) |
| 56 | Water thinnable cement primer (HSR 11.67.1) |
| 57 | Applying priming coat: (HSR 11.68) |
| 58 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works (HSR 11.68.3) |
| 59 | Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade :HSR 11.71 |
| 60 | 11. 71.1Two or more coats on new work |
| 61 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 11.76) |
| 62 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 11.77) |
| 63 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 11.78 |
| 64 | Finishing walls with Acrylic Smooth exterior paint of required shade : HSR 11.95 |
| 65 | 11.95.1New work (Two or more coat applied @ 1.67 litre/1O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 66 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202(Part I) non-decorative type, core of block board construction with frame of1st class hard wood and well matched commercial 3 ply veneering withvertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37) |
| 67 | 30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (12.37.2) |
| 68 | Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (powder coated)(HSR 12.98) Note : -No extra payment will be made for Powder coating |
| 69 | 250x16 mm (HSR 12.98.2) |
| 70 | Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (powder coated) (HSR 12.99)Note : -No extra payment will be made for Powder coating Tower Bolt 150mm(HSR 12.99.4) |
| 71 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (powder coated) (HSR 12.102)Note : -No extra payment will be made for Powder coatingHandle 125mm (HSR 12.102.1) |
| 72 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. HSR 13.2 |
| 73 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3) |
| 74 | Profile B (HSR 13.3.1) |
| 75 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.3.1.2) |
| 76 | Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect. HSR 13.18 |
| 77 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(HSR 13.29) |
| 78 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works(HSR 13.29.2) |
| 79 | TOTAL CIVIL HSR= |
| 80 | Civil NS items |
| 81 | Earth fillingwith earth brought from out side including rolling watering ramming and compaction complete in all respectforirrespective lead and lift complete and fullyatisfication of Engineer in - charge(NS) |
| 82 | Supply of 1st class brick from kiln to the site of work for brick on end edging complete in all respect. |
| 83 | Finishing of the laid cement concrete with vaccum dewatering system surface vibrator and fine trowel complete in all respect (NS) |
| 84 | Cutting groove in crement concrete road of size 5mm x 50mm etc complete in all respect (NS) |
| 85 | TOTAL CIVIL NS= |
| 86 | P.H WORKS (HSR +NS) |
| 87 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m. HSR 4.8.1 All kinds of soil |
| 88 | Drilling and tapping cast iron pipe lines of all diameters and screwing in ferrule and connections - HSR 20.2420.24.5Ferrule size 32 mm |
| 89 | Cutting holes up to 23 cm square through brick work in mud walls for pipes and making good induding repointing, replastering and finishing according to existing finish where required. HSR 20.2520.25.2 22.86 cm thick wall |
| 90 | Providing and screwing in brass/Gun Metal ferrules drilling and tapping Cast Iron ID.I. /G.I. pipe lines of all diameters and connections including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. (Excavation will be paid separately). HSR 20.5620.56.210mm i/d ferrule |
| 91 | Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR 21.84) |
| 92 | 21.84.2 Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) |
| 93 | Extra for every 0.30 metre depth of Inspection chamber (HSR 21.85) |
| 94 | 21.85.2 450 mmx 600 mm inside |
| 95 | Providing salt glazed stone ware pipes grade "A" in standard length of 600mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge. HSR 21.94 |
| 96 | 21.94.2 150mm i/d |
| 97 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.HSR 22.10 |
| 98 | 22.10.1 Kitchen sink with drain board |
| 99 | 22.10.1.1 510x1040 mm bowl depth 250 mm |
| 100 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(HSR 22.14) |
| 101 | 22.14.2 Flexible pipe |
| 102 | 32mm dia(HSR 22.14.2.1) |
| 103 | Providing and fixing white vitreous chinaware flat back or wall comer type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: HSR 22.25 |
| 104 | 22.25.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 105 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. HSR 22.35 |
| 106 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1 :3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1 :4 (1 cement : 4 coarse sand) :HSR 22.81.2 75 mm dia. |
| 107 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (HSR 22.86) |
| 108 | 15 mm nominal outer dia Pipes (22.86.1) |
| 109 | 20mm dia nominal outer dia Pipes(HSR 22.86.2) |
| 110 | 25mm dia nominal outer dia Pipes(HSR 22.86.3) |
| 111 | 32mm dia nominal outer dia Pipes(HSR 22.86.4) |
| 112 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (HSR 22.94) |
| 113 | 15 mm nominal bore (22.94.1 ) |
| 114 | 20 mm nominal bore (22.94.2) |
| 115 | 25mm dia (HSR 22.94.3) |
| 116 | 32mm dia (HSR 22.94.4) |
| 117 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (HSR 22.103) |
| 118 | 20 mm nominal bore (HSR 22.103.2) |
| 119 | 25 mm nominal bore (22.103.3) |
| 120 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. HSR 22.104 |
| 121 | 22.104.1 15 mm nominal bore |
| 122 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. HSR 22.106 |
| 123 | 22.106.115 mm nominal bore. |
| 124 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. HSR 22.107 |
| 125 | 22.107.1 15 mm nominal bore |
| 126 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of each 3 52 55 approved make and quality as per direction of Engineer-in-charge. (HSR 22.109) |
| 127 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: HSR 22.166 |
| 128 | 22.166.2150 x 100 mm size P type |
| 129 | 22.166.2.1With common burnt clay non-modular bricks of class designation 7.5 |
| 130 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR 22.181 |
| 131 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.HSR 22.222 |
| 132 | 22.222.2Single Socket Type B |
| 133 | 22.222.2.2 110mm old SWR UPVC pipe lines laid complete. |
| 134 | 22.222.2.390mm old SWR UPVC pipe lines laid complete. |
| 135 | TOTAL P.H HSR= |
| 136 | P.H (NS items) |
| 137 | P & F SWR PVC pipe classic "B" specials ISI marked Fittings (Kisan, Prince, Finolex make) |
| 138 | 110mm dia |
| 139 | PVC clamp |
| 140 | Cowel |
| 141 | Plain Bend |
| 142 | Socket |
| 143 | Door tee |
| 144 | b) 90mm dia |
| 145 | Plain Bend |
| 146 | Floor Trap |
| 147 | P/F in position GI hooks for GI pipes complete ( NS) |
| 148 | P & F CP Flange of required dia |
| 149 | P/F full bore, quarter turn, lever operated, forged brass ball valve with forged brass hard chrome plated ball, tested to a pressure not less then 15 kg/sqm with threaded joints, complete in all respect. NS |
| 150 | 32 MM DIA |
| 151 | Providing & Fixing S.S Grade 304 urinal pot with flushing point and waste net as per approved make (Silver shine brand)etc. complete in all respect. |
| 152 | Providing & Fixing S.S Lavatory Pan seat (orissa pan) grade 304 make (Silver shine brand)etc. complete in all respect. |
| 153 | Supply & Fixing of S.S W.C Wall hung/floor mounted grade 304 make (Silver shine brand) with flushing jet, PVC Sheet cover and fasteners etc. complete in all respect. |
| 154 | P & F in position CP jali (Brass) of heavy quality 100mm dia of standard make |
| 155 | TOTAL NS= |
| 156 | E.I. HSR PART Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required.(HSR 23.3.6.9) 3 run of Size 1.50 Sqmm(1/1.40mm) |
| 157 | COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT as per HSR 23.4. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. (HSR 23.4.1.) iii) Group C |
| 158 | Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required as per HSR 23.4.4. iii) Group C |
| 159 | Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling, including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required as per HSR 23.4.5. iii) Group C |
| 160 | Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. per HSR 23.4.5. iv)1 run of Size 6 Sqmm(1/2.80mm) |
| 161 | Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. as per HSR 23.7.6. ii) PVC pipe of 25 mm dia. |
| 162 | iv) PVC pipe of 40 mm dia. |
| 163 | Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cmlong M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. As per HSR 23.8.4. |
| 164 | Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. As per HSR 23.8.1 vii)Electric buzzer 220/230 volts A.C. Bakelite with double coil |
| 165 | xii)Bakelite angle/straight button holder large size. |
| 166 | Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects.As per HSR 23.8.10 i)1 & 2 Modules including combined plate for Telephone and data |
| 167 | ii)3 Modules |
| 168 | iii)4 Modules |
| 169 | iv)6 Modules |
| 170 | v)8 Modules |
| 171 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. As per HSR 23.8.11 i)5 amp 1 way switch |
| 172 | iv)5 amp Socket |
| 173 | vii) step type Fan Regulator 2 modules 300 watt |
| 174 | viii)Telephone Socket outlet modular type |
| 175 | ix) TV Socket outlet modular type |
| 176 | x) Blanking plate |
| 177 | Supply and Fixing 3 mm thick Bakelite sheet cover on existing MS/PVC junction box/tee etc including fixing with brass screws and washers.As per HSR 23.8.12 |
| 178 | Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. as per HSR 23.22.4. vii)TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) |
| 179 | xi)Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing |
| 180 | Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. as per HSR 23.22.1. iv)TRIPLE POLE MCCB 125 to 160 Amp, 25 KA |
| 181 | x)4 pole MCCB 125 to 160 amp, 25 KA |
| 182 | xi)4 pole MCCB 200 to 250 amp, 25 KA |
| 183 | Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-as per HSR 23.22.5. i) 6 amp. to 32 amp Single Pole |
| 184 | ii) 40 amp to 63 amp. Single Pole |
| 185 | vi)40 amp to 63 amp. MCB"s TRIPLE POLE |
| 186 | vii)40 amp to 63 amp. MCB"s FOUR POLE |
| 187 | SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings as per HSR 23.22.8 ii) 100amp 415 volts |
| 188 | Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work as per HSR 23.23.8 i)2 pair telephone wire |
| 189 | Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required. as per HSR 23.23.9 |
| 190 | Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide.as per HSR 23.24.1. |
| 191 | EARTHING AND LIGHTENING ARRESTOR as per HSR 24.1.(i)Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 192 | (ii) Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 193 | (iii)Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 194 | v) Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode. |
| 195 | Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size. |
| 196 | S/E suitable compression type brass cable gland for under ground cable. As per HSR 24.2.6 ii) 10 to 16 Sqmm2 to 4 core Cable. |
| 197 | iii) 25 Sqmm to 50 Sqmm 2 to 4 core. |
| 198 | Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work .As per HSR 24.2.8 i) 4 sqmm to 6 sqmm |
| 199 | ii) 10 sqmm |
| 200 | iii) 16 sqmm |
| 201 | iv) 25 sqmm |
| 202 | v) 50 sqmm |
| 203 | Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge as per HSR 20.71.(Make- Havells, Model- EQUS and equivalent as per brand list) ii) 48" (1200mm) |
| 204 | Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part- 2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC (c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency (d) Data Monitoring System complete with accessories (e) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (f) Lightning and surge voltage protection. (g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. as per HSR 32.70. i)Above 1 kWp and up to 10 Kwp |
| 205 | Total E.I HSR Part |
| 206 | NS E.I. Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost anderection of pipe) (i) Size 1.50 Sqmm |
| 207 | (ii) Size 4.00 Sqmm |
| 208 | (iii) Size 10.00 Sqmm |
| 209 | S/E of LED 10 watt rectangular bulk head fittingwith opal diffuser& 10 watt LED i/c erection of fitting in wall/Ceiling & making necessary connection to complete the job with all labour and petty material as required(Make:- Havells / Model- Endura Rugby or equiavalent model of other approved brands). |
| 210 | S/E of 72 watt LED white colour, pressure diecast aluminium street light luminaire, working hour minimum 35000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 211 | S/E of LED 15/18 W downlighter square/ round surface /recess mounting white colour working hour minimum 35000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 212 | Supply & Erection ofsurface mounting LED Batten fitting 1 x 18/20 watt (4 feet long), white colour, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 213 | S/E ofLED Panel of 33/34/36 W surface/ recess mounting size 2"x2" energy efficient white colour working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 214 | Supply and erection of 40 Watt 5700 K LED Post-Top Lantern luminaire Made in die-Cast Aluminium Spigot housing with decorativepolycarbonate diffuser& IP-65 Protection fixed on existing pole. The work will be complete in all respect including making necessary connections, nuts & bolts and labour etc. |
| 215 | Supply and erection of metal exhaust fan, double ball bearing suitable for single phase A.C. 230 Volts, 50 HZ capacitor ,900 RPM (Heavy duty) complete with mounting ring, blade, fixing and making necessary connections etc. (Crompton greaves makeequivalent to other approved brands) i) Size 380 mm sweep" |
| 216 | Supply and erection of aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National make) i) Size 380 mm sweep |
| 217 | S/E of 250 mm sweep AC Ex fan PVC body with louver shutter suitable for single phase CA 230 volt 50 hz supply 900 RPM and capacitor run complete in all respect . |
| 218 | Supply & erection of almuninium under ground cable ,loose in existing pipe or trenches complete with necessary connections. (i) 50 Sq. mm 4 Core Cable .(Armoured) |
| 219 | (ii) 25 Sq. mm 4 Core Cable . (Armoured) |
| 220 | (ii) 6 Sq. mm 2 Core Cable . (Armoured) |
| 221 | Supply and erection of PVCpipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. (i) PVCpipe 80 mm dia. |
| 222 | Supply and erection of co-axial TV cable (RG-6) with electrolytic grade solid bare copper conductor, gas injected physical foamed polythylene insulation, screened with laminated aluminium tape & aluminium alloy wire braided, jelly flooded & UV grade PVC jacketed in existing pipe, complete in all respect including making necessary connections and labour etc. |
| 223 | Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect i) Rotary handle up to 125A, MCCB |
| 224 | Supply, Installation, testing & commissioning of Full HD 43” Full HD Monitorincluding cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having minimum technical specifications and above as under:- Resolution : 1920*1080 (FHD) with minimum 350 nits, RS 232 control port, Backlight : LED, Response time: 5ms, Input : VGA,HDMI, Audio , Output: Speaker * 1, Consumption : 58W, Industrial Level DID LCD Panel, Suitable for extensive 7*24 Hours Continuous Works, Built in Speaker , Certificate : CE,CB,FCC (SAMSUNG/DAHUA/LG/ PANASONIC/ SONY/CP PLUS) |
| 225 | S/E of water cooler of stainless steel body with 150 ltr storage & cooling capacity with all petty material. |
| 226 | S/E of 50 LtrRO Water purification system with all petty material |
| 227 | Total E.I. (NS items) |
| 228 | Smart Integrated Solution (Access control, Video Surveillance, Network Broad casting, Announcement, RFID/ Biometric etc.) HSR PART Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- as per HSR 23.23.1. (i)Size 15 mm dia |
| 229 | Total HSR Part (Smart Integrated Solution (Access control, Video Surveillance, Network Broad casting, Announcement, RFID/ Biometric etc.) |
| 230 | NS Item(Smart Integrated Solution (Access control, Video Surveillance, Network Broad casting, Announcement, RFID/ Biometric etc.) Supply, installation, splicing, testing & commissioning of 12 core armoured single mode optical fibre cable with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work including cost of testing through OTDR Machine. |
| 231 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 232 | S/E of PVC insulated multi core copper conductor cable (unarmoured) 1100 volts grade (round) in existing pole/ pipe, complete in all respect including making necessary connections. i) Size 2.50 Sqmm x 3 core |
| 233 | Supply, Installation, testing & commissioning of Rack IP66 6U wall mount rack 400mm deep with front door glass consisting of power distribution 5 amp., mounting hardware, cable manager steel loop-horizontal, fan without tray & pole mounting kit etc. with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 234 | S/E of Plain HDPE pipe for optical fibre cable as per IS 4984-1995 laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe, complete in all respect upto the entire satisfaction of Engineer-incharge of the work. (i)HDPE pipe 50 mm outer dia. (ISI) |
| 235 | Digging of trench for HDPE pipe and fibre optic cable, 4 mtr below ground level with trenchless Horizontal directional drilling machine pipe pulling (HDD) machine complete in all respect. |
| 236 | Supply, installation, testing and commissioning of 8-Port PoE Switch Layer 2 - Rack Mountable PoE Gigabit Ethernet standalone chassis, provides 8 RJ-45 10/100/1000 BaseT, 2 SFP/RJ-45 10/100/1000 BaseT or 100/1000 BaseX combo with AC power supply, option for stacking module, communication of the cameras to the NVR with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 237 | Supply, installation, testing and commissioning of1GB 24 Port PoE Layer 2 Switch With 4 Nos of SFP Slots with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 238 | Supply, installation, testing and commissioning of HDMI EXTENDERHDMI extender supports 1080P HD, HD Audio, 3D; 20~60KHz wide Frequency, IR remote control(IR Signal input to connect with IR receiver extension cable. HDMI Single cable transmission:It extends HDMI 1080P AV signal to at least 60M by cat6 or higher level cables with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 239 | Supply, installation, testing and commissioningof HDMI CABLE 1MTR Category 2 Certified - High-Speed 10.2 gbps / 340 MHz (Supports up to 240hz Refresh Rates and 48-Bit Deep Color) Supports all new HDMI advanced features such as 3D, audio return channel, ethernet, dolby trueHD and DTS-HD master audioTM,Fully compatible with all blu ray players, Supports resolution 720p, 1080i, 1080p and beyond,Fully shielded heavy duty premium grade cable with soft PVC jacket.,Full metal jacket connector provides strength, durability and prevents with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of theWork. |
| 240 | Supply, Installation, testing & commissioning of Cat 6 Armoured Cable with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 241 | Supply, installation, testing and commissioning of 12 core LIU (light interface unit) with Box for OFC connectivity with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 242 | Supply, installation, testing and commissioning ofSingle mode SC Pigtailwith all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 243 | Supply, installation, testing and commissioning ofSingle core LC Fibre Patch Cordwith all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 244 | Supply, installation, testing and commissioning of1-port mini-GBIC LX Single-mode Fiber Transceiver (up to 10km, support 3.3V power)with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 245 | Supply, installation, testing and commissioning of HDMI SPLITTER 1 TO 4SPLITTING IMAGES: 1x4 HDMI Splitter distributes 1 HDMI input into 4 corresponding synchronized outputs with an advanced chip that can analyze and process up to 225 MHz LOSSLESS STREAMS: Our HDMI Splitter allows for zero transmission loss even for long distances of 50 feet; outside metal casing both protects the internal components and dissipates heat for better performance. COMPATIBILITY: GadgetsAccessories HDMI splitter supports 480P, 576P, 720P, 1080i, 1080P, 4K and 3D up to 3840x2160 resolution; Audio Formats supported: LPCM7.1, DTS, DOLBY-AC3, DSD/DTS-HD, Dolby-trueHD with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 246 | Supply, Installation, testing & commissioning of RJ45 Connector including cost of petty material required to complete the work up to the entire satisfaction of Engineer In Charge. |
| 247 | Supply, Installation, testing & commissioning of IR BULLET Network Camera including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having minimum technical specifications |
| 248 | Supply & erection of dust & water proof outdoor box of Size 4" X 4" for CCTV Camera with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 249 | Supply, installation, testing and commissioning of POE based IP PHONE 2 line keys with dual-color LED and 1 SIP account, 3 XML programmable context sensitive soft keys, 5 (navigation, menu) keys. 13 dedicated func- tion keys for PAGE/INTERCOM, PHONEBOOK, MESSAGE, HOME, HOLD, RECORD, MUTE, HEADSET, TRANSFER, CONFERENCE, SEND and REDIAL, SPEAKERPHONE, VOLUME with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 250 | Supply, installation, testing and commissioning TV Broadcasting System with Network video Reciever TCP/IP Support with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 251 | Supply, installation, testing and commissioning PA Horn Louds peaker made with ABS, water and dust protected to IP65, Sound pressure level at 15W/1W- 115/103 db (SPL), Effective frequency range 500 Hzs to 5 KHz,Fitted with 0.6m (2’) 2-core sheathed speaker cable, secured through a water-tight, tug-proof cable gland. They meet European Union regulations and comply with low voltage directive standard EN 60065. Degree of protection with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. (AHUJA/BOSCH/ITC/EV/ MEGA) |
| 252 | Supply, installation, testing and commissioning of 60 WATTS WITH BUILT-IN DIGITAL PLAYER MEDIUM WATTAGE PA MIXER AMPLIFIER 3 Mic & 1 Aux Input. Built-in MP3 player with USB reader and remote control, frequency range 50-15000 Hz, signal to noise ratio 60db, Line Output for connecting to a Booster Amplifier. Cut type tone control with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. |
| 253 | Supply, installation, testing and commissioning of Outdoor Wifi AP Complies with IEEE 802.11b/g, wireless speed up to 54Mbps Outdoor weatherproof and 4000V lightning/15KV ESD protection design 12dBi dual-polarized antenna to build long distance WiFi connection up to 2km High power to boost your signal coverage and link speed Up to 60 meters (200 feet) of flexible deployment with included power over Ethernet injector with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. (RUCKUS/CISCO/TPLINK/DLINK) |
| 254 | Supply & erection of PVC Battan of Size 25 x 16 mm Thick, complete in all respect including cost of PVC guttis, steel screws and labour etc. |
| 255 | Supply and erection of PVC Channel 50 x 50mm thick complete in all respect including cost of PVC guttis, steel screws and labour etc. |
| 256 | S/E of hot press moulded SMC junction box (Sintex, Hansel, Somshiva) with hinged cover on existing pole/wall complete with clamps, nuts & bolts, DIN channel for erection of SPMCB/TPNMCB and copper terminal block for 3 phase 4 wire system including labour, petty material and making necessary connections etc but excluding cost of MCB. (i) Size 185 mm x 165 mm x 60 mm (inside) & 225 mm x 205 mm x 65 mm (outside) |
| 257 | S/E of PVC insulated multi core copper conductor cable (unarmoured) 1100 volts grade (round) in existing pole/ pipe, complete in all respect including making necessary connections. Size 1.5 Sqmm x 2 core |
| 258 | Supply, installation testing and commisioning of outdoor High frequency 13.25 Mifare RFID and figerprint Biometric (STQC Certified) duty enforcement and control system of following specifications:- Operating system - Android, Display Size- 7 |
| 259 | Total NS Items (Smart Integrated Solution (Access control, Video Surveillance, Network Broad casting, Announcement, RFID/ Biometric etc.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
