Military Engineer Services-MES has published Special Repairs To Flooring, Toilets, Joinery Etc At Qtr No P-39 / 3 And P-41 / 4 Offr Md Accn, Spl Repairs To Bldg No Ew-56 And Spl Repairs To Boundary Wall Alongwith Nh 31 From Tcp 2 To Mahar Loc At Dipatoli Pocket Of Ranchi Mil Stn. Submission Date for this Tender is 02-05-2022. Building Repair Tenders in Ranchi Jharkhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-05-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed. |
| 2 | M&L for Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/and finished the surface fair and even complete as specified and directed |
| 4 | M & L for rendering 10 mm thick in cement Mortar (1:4) on the surfacesof ceiliing and finished the surface fair and even complete as specified and directed |
| 5 | Complete removal of existing treatment on wall surfaces complete all as specified. |
| 6 | M&L for preparation of newly / old plastered surfaces ofwall and applying a coat of wall care putty 3 mm thick to make the surfaces truly smooth complete all as specified. |
| 7 | M &L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed. |
| 8 | M &L for applying one coats of distemper oil emulsion on old surfaces of wall including necessary preparation of surfaces complete all as specified and directed. |
| 9 | M &L for applying one coat of distemper oil emulsion on old surfaces of Ceiling including necessary preparation of surfaces complete all as specified and directed. |
| 10 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both sides prelam PVC sheet used instead ofplain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 11 | M&L for preparation of old plastered surfaces and applying two coats of white wash on wall surfaces complete all as specified and directed. |
| 12 | M &L for preparation of newly plastered surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 13 | M &L for preparation of old plastered surface and applying one coat of white wash on ceiling surfaces complete all as specified and directed. |
| 14 | M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed. |
| 15 | M &L for preparation of old plastered surface of wall and applying two coats of cement base paintcomplete all as specified and directed. |
| 16 | M&L for coloured glazed ceramic tiles in vertical surface350x 250x 7 mm / 450X 350X 7mm thickover10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed |
| 17 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. |
| 18 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in CM(1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. |
| 19 | M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in floor etc set and jointed, joint free and pointed in white or coloured cement to matchincl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles all as specified and directed. Make: Kajaria/Somani/Johson(1st quality/premium quality).. |
| 20 | M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in sizeas in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to matchincl 10mm thick rendering in cement mortar 1:4finished rough to recive tiles all as specified and directed. Make: Kajaria/Somani/Johson (1st quality/premium quality). |
| 21 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in window cills, cooking platforms and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteall as specified and directed. |
| 22 | Demolition of brick bats laid dry including returning filling spreading, levelling, watering and well ramming in layer in sunken floors. |
| 23 | M&Lfor water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:- (a) Laying plain cement concrete padding (1:2:4) Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound" Pidicrete URP manufactured by M/s Dr. Fixit or equivalent as per manufacturer instructions". Note-Integral water proofing compound shall be measured in supply only. |
| 24 | (b) floor / vertacal skirting side plaster in CM (1:3), 15mm thick with and includingusing "Pidicrete URP" manufactured by Dr Fixit as per manufacturer instruction and 72 Hrs tesing for water tightness by ponding of water. |
| 25 | (c)Applications of two coats of proof coat black manufactured by Dr Fixit or equivalent as per manufacturers instructions all over and testing again for water tightness by ponding of water for 72 Hrs. |
| 26 | M&L for cement concrete (1:5:10) Type E2 (40mm graded stone aggregate) as in mass concrete. |
| 27 | S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. complete as specified and directed |
| 28 | S&F Bath cabinet mirror of size 350 x 450 mm made ofPTMT alloy complete all as specified and directed. |
| 29 | S&F chromium plated health faucet with 1 m long pipe. Complete all as specified and directed |
| 30 | S&F chromium plated hand shower. Complete all as specified and directed |
| 31 | S&F chromium plated toilet paper holder size 150 x150mm complete all as specified and directed. (Make - Plumber economical series or Marc/Jaquar/Seiko/Crabtree as approved by GE) |
| 32 | Supply only PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacityof approved incl flush pipe of 32mm bore make all as specified and directed |
| 33 | S&F in repairs. vitreous china wash basin, white flat back size 550x400mm (excluding taps), incl.CP waste coupling & PVC waste pipe and brackets, all as specified and directed |
| 34 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed. |
| 35 | Taking up or down steel tubing and connection of 20 dia bore. Complete all as specified and directed |
| 36 | Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth. Complete all as specified and directed |
| 37 | Refixing old steel tubing and connections in new or old position 15mm dia. Complete all as specified and directed |
| 38 | Refixing old steel tubing and connections in new or old position 20mm dia. Complete all as specified and directed |
| 39 | S&F in repairstop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, all as specified and directed |
| 40 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shankandcup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, all as specified and directed |
| 41 | S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. Complete all as specified and directed |
| 42 | S&F in repairs Brass CP mixer tap 15mm dia bore (three in one)for mixing hot & cold water screwed down for iron pipe. Complete all as specified and directed. |
| 43 | S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia borefor mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe. Complete all as specified and directed |
| 44 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipeor for brass ferrule. Complete all as specified and directed |
| 45 | M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower. Complete all as specified and directed |
| 46 | S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges. Complete all as specified and directed |
| 47 | Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. Complete all as specified and directed |
| 48 | S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank. Complete all as specified and directed |
| 49 | Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed |
| 50 | Taking down shutters area n exc 1.0 Sqmeachcomplete as specified and directed. |
| 51 | Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete as specified and directed. |
| 52 | M&L for 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed, all as specified and directed |
| 53 | S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed. |
| 54 | S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squareswithplain chamfered or rounded mitred and rebatedfitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part-I section-8,clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed. |
| 55 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified. |
| 56 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing |
| 57 | Providing and fixingof powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b)Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c)Sliding shutter frame of cross section 40 x18 x 1 mm (d)Aluminium glazing strip of size 18.2 x 16.66mm (e)4 mm thick float glass superior qualityfor 2 shutters. (f)IDPE rubber gasket for fixing glass (g)Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j)Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k)Fixing screws for frame with wall 06 per window |
| 58 | S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed |
| 59 | S&F Aluminum handle cast type anodized size 150 mm long, completeall as specified and directed. |
| 60 | S&F for 300 mm mild steel helicalspring including roller and roller plate, complete all as specified and directed |
| 61 | S&F for MS Butt hinges medium weight,cold rolled Mild Steel for 100 mm size all as specified and directed |
| 62 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), all as specified and directed |
| 63 | S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), all as specified and directed |
| 64 | S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed |
| 65 | S&F in repair Aluminum handle cast type anodized size 150 mm long, completeall as specified and directed. |
| 66 | S&F in repair Galvanized Mildsteel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed. |
| 67 | Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames. |
| 68 | S&F 3.00mm thickpin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required. |
| 69 | M&L for cement concrete type B1 (1:2:4) (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed |
| 70 | M&L for one coat of synthetic enamel paints on old steel surfacesover 10cm width or girth after necessary preperation ofold surfaces. Completed all as specified and directed |
| 71 | M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primerover 10cm width or girth. Complete all as specified and directed |
| 72 | M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed. |
| 73 | S&F in repairs decorative curtain rod made out of 25 mm dia (outer dia) MS pipe having wall thichness 0.63 mm, PVC coated of any coulor and pattern as approvedoverall dia 28 to 29 mm,including provn of two nos brackats on each ends and provn of two nos of globe on each ends for each window/door for fixing complete all as specified and directed. Make:- Vista , MEC. |
| 74 | S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board. Complete all as specified and directed |
| 75 | S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed. |
| 76 | S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed |
| 77 | S & Fin repair40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed. |
| 78 | S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed. |
| 79 | M&L for 30mm width of flap MS piano hinges complete as specified and directed |
| 80 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 81 | M&L for roof treatment in repair by complete removel of existing oldtreatment and treatedwith following specifications :- (a)Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b)15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c)Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture"s instruction. (e)Applying two coat of aluminium paint over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item. |
| 82 | S & F Corner Glass Shelf 300 mm (with ABS brackets) of size (300x300)mm complete all as specified and as directed. |
| 83 | S&F in repair soap Dish vitreous china Approx size 160x 160x90mm complete all as specified and directed |
| 84 | Dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a side all as directed. |
| 85 | S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 86 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/parnala to wall/roof fixed with self tapping screws as specified and directed |
| 87 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long but not exc 15cm, dia of neck 11 to 15mm and all as specified and directed. |
| 88 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins arches pillarsetc, complete all as specified and directed |
| 89 | M&L for Brick workwith fly ashbricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete, all as specified and directed |
| 90 | M&L for Brick workwith fly ashbricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6, complete, all as specified. |
| 91 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and all as specified and directed. |
| 92 | S&F steel work in tubular trusses including special shaped washer etc, complete using ERW or indiction butt welded tubes conforming to IS-1161 1979 grade St-240. Complete all as specified and directed |
| 93 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified anddirected |
| 94 | M&L rendering on other than fair faces of brick work 15mm thick in CM (1:6) and to be finished smooth and even with out using extra cement for internal surfacecomplete all as specified anddirected |
| 95 | M&L rendering on other than fair faces of brick work 15mm thick in CM (1:4) and to be finished smooth and even with out using extra cementfor external surfacecomplete all as specified anddirected |
| 96 | M&L for preparation old surfaces of wall by washing ,rubbing down and stoping of distempered and pointed surfaces and applying two coats of distemper oil emulsion white or tinted over 3mm thick white wall care putty to achieve even and smooth surface complete all as specified and directed. |
| 97 | M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls and including average 3mm thick white wall care putty to achieve even and smooth surfacecomplete all as specified and directed |
| 98 | M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm on new surface of wall and all as specified and directed |
| 99 | M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including complete removal of of old existing treatment and all as specified and directed |
| 100 | Demolition of cement concrete (un-renforced) of any description and in any position not otherwise specially proded for |
| 101 | M&L for PCC (1:2:4) type B1 20mm grade aggregate as inlintels upto 1.5m clean span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including, weathering, slightly rounded or chamfered angles and throating as directed. |
| 102 | M&L for RCC type B1 (1:2:4) (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.50m span and all as specified and directed |
| 103 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape length, bent to shape required, including cranking, bending spirally for hopping for columns,hooking ends and binding with and incuding mild steel wire (annealed) not less than 0.9mm dia or securing with clips and all as specified and directed. |
| 104 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished surfaces of flat concrete and all as specified and directed. |
| 105 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete wall, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide rough finished surfaces of concrete. Complete all as specified and directed |
| 106 | S&F as in repairsm harrison rails, anodised aluminium alloy chromium plated with fixing backets, stops, rollers etc. Complete all as specified and directed |
| 107 | Taking down chowkhat with shutter (without taking off shutter from chowkhat) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed |
| 108 | Taking down chowkhat with shutter (without taking off shutter from chowkhat) n.exc exceeding 1.5 Sqm each complete all as specified and directed |
| 109 | S&F 30mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood face panel, commercial type on both sides decorative face veneer with lipping/frame to bothcomplete all as specified and directed Make : M/s Jain wood Industries |
| 110 | S&F pressed steel frames of size 125 x 60 mmx1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and directed |
| 111 | S&F brass sliding door bolts 300mm long with sand or die-cast brass hasp, staple(bolt type) and fixing bolt with rooled or drawn brass bolts complete all as specified and directed |
| 112 | S & F brass barrel tower bolt 200mm longwith cast or sheet barrel and rolled or cast bolt and fixed complete all as specified and directed |
| 113 | S & F 150mm long brass handle cast type polished bright complete all as specified and directed |
| 114 | S&F small fitting shaped door and window stops n"exc 200 cucm each of 2nd class hard wood complete all as specified and directed |
| 115 | M&L in applying two coats of synthetic enamel paints over a coat of red oxideprimer on new steel surfaces over 10 cm width or girth including preparatinon of surfacescomplete all as specified and directed |
| 116 | S&F brass mortice lock, vertical type, size 65mm 2 Levers fixed and all as specified and directed. |
| 117 | S&F powder coated Aluminium sliding window/lovers of specified aluminium section weight not less than 0.55 kg /Rm with aluminium bead, rubber bead including locking arrangement, handle, etc and all as specifed and directed |
| 118 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 119 | S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and directed |
| 120 | S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 4mm thick complete all as specified and directed |
| 121 | S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 5.50mm thick complete all as specified and directed |
| 122 | M&L for mild steel works as in framed work such as grills, gratings, etcwith ends of bars shoulderedand/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etccomplete all as specified and directed |
| 123 | S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.00mm and fixed with pinned tack or galvanized staples complete all as specified and directed |
| 124 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish offpremises etccomplete all as specified and directed |
| 125 | M&L for Brushing neat cement slurry with 3.00 Kg/Sqm of cement complete all as specified and directed |
| 126 | M&L for light shadevitrified ceramic tiles 10mm thick (square/ rectangular) polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 127 | All as per item No 126 above but in skirting Dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and directed |
| 128 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick(squasre/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in 15mm thcik cement screed bed (1:6) and all as specified and directed. |
| 129 | M&L for coloured glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matche inclduing 10mm thick cment plaster for reciving the wall tiles and all as specified and directed. |
| 130 | Dismantling wall and ceiling board (fibre,pulp,insulations etc)or insulation board any thickness including cover fillets complete all as specified and directed |
| 131 | M&L 12mm for seamless calcium silicate ceiling made out of 1800x1200x12mm size board of siliceous and calareous materiasl reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having pghilips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (frame work for ceiling shall be measured and paid separately). |
| 132 | M&L GI frame work for seamless ceiling coprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intemediate channel at 450mm centre to centre and all as specified and directed. |
| 133 | S&F for hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof.slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasterns 12.5mm dia, 40mm long complete all as specified and directed. |
| 134 | 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection, finished even and smooth with out using extra cement including forming and filling of joints with bituminous filler all as specified and directed. |
| 135 | M&L for cement concrete type D2 (1:4:8) (40mm graded aggregate) as in foundations, filling and mass concrete. |
| 136 | Excavating in post holes (or similar holes) each n.exc 0.5 cum soft/loose soil getting out returning, filling in and ramming,earth or broken rubble mixed with earth around, in layers not exceeding 25cm |
| 137 | M&L for cement concrete type C2 (1:3:6) (40mm graded aggregate) as in foundations, filling and mass concrete, all as specified and directed |
| 138 | Demolition ofcement concrete (un-reinforced) in ground floors and pavingnot exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed |
| 139 | M&L High definition printing of vitrified tiles and surface textures heavy duty parking tiles 30cmx30cmx10mm thick over 15mm thick screed bed in CM (1:6) set jointed and pointed in neat cement slurry in floors complete all as specified and as directed |
| 140 | Supplied and fixed in repairvitteous chinawareEWCcloset with whiteseat & cover with flat bottom with hinging device all as specified and directed. |
| 141 | S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer . |
| 142 | S&F 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and as directed |
| 143 | S&F in repairvitreous china wash Basin white flat back size 550 x 400mmincluding brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed |
| 144 | S&F 40 mm low density polyethylene (HDPE) pipes. Complete all as specified and directed |
| 145 | Supply and fixing in repair PVC low level flushing cistern of 10 Ltr capacity (Dual flush) including flushing pipe bend, PVC connection etc. complete all as specified and directed. |
| 146 | S&Fin repair pillar tap 15mm diacost copper alloy ,wtih CP fancy type complete all as specified and directed |
| 147 | S&F in repair Bib taps ,15 mm bore,chromium platedfancy type with crutch or butterflyhandle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 148 | S&F in repair15mm dia stop/angle valvefancy type chromium plated concealed type, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions. Complete all as specified and directed |
| 149 | S&Fin repair 15mm dia stop valve/angle valvefancy type chromium platedscrewed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. Complete all as specified and directed |
| 150 | S&F Soap dish,approximate size 160x160x90mm any type, fixed to plugs with chromium plated brass screws. Complete all as specified and directed |
| 151 | S&F looking mirror 600x450 mm, bevelled edge of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Complete all as specified and directed |
| 152 | S&F Chromium plated tubular towel rail, 20mm dia, D type 60 cm long between flanges. Complete all as specified and directed |
| 153 | S&F PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement. Complete all as specified and directed |
| 154 | Supplied and fixed in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed |
| 155 | Taking down GI tubing and connection including removing to store of 15mm dia complete aall as secified and directed |
| 156 | Taking down GI tubing and connection including removing to store of 20mm dia complete aall as secified and directed |
| 157 | Supplied and fixed GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed |
| 158 | Supplied and fixed GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed |
| 159 | S&F in repair15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. Complete all as specified and directed |
| 160 | M&L for rendering 15mm thick plaster in CM (1: 4) on new surfaces of wall including preparation, finished even and smooth without using extra cement and all as specified and directed. |
| 161 | Preparation of new plastered surfaces of wall and applying two coats of plastic emulsion paint(weather proof exterior emulsion)under one coat of primer surface and all as specified and directed including cornices pilasters etc complete all as specified. (Colour and Design as approoved by GE) |
| 162 | Complete removal of existing treatment, washing, etctwo coats of plastic emulsion paint(weather proof exterior emulsion)under one coat of primer surface and all as specified and directed including cornices pilasters etc complete all as specified. (Colour and Design as approoved by GE) |
| 163 | M&L for 10mm thick cement plster in Cement Mortar (1:3) including concrete work for RCC chajjas, fins, facia celinng of hajja and like not exceeding 60 cm wide inluding necessary formwork, scoffolding, finshed even & smooth without using extra cement complete all as specified and directed. |
| 164 | Supply only integral waterproofing compound |
| 165 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed. |
| 166 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good thedisturbed surfaces of walls,floors roofs etc complete all as specified and directed. |
| 167 | Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connectionincludingMCBs, Isolators etc and making good to disturbed surface complete all as specified and directed. |
| 168 | Taking down Old/ Unserviceabl MCBDBs TPN / Main Switchesby disconnection of electric connection including old unsvMCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specifiedand directed. |
| 169 | M&L point wiringfor One light/Fan point controlled by onefive amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn throughPVC conealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screwas suitablesize for mounting ofswitch & scoketincluding 1.5 sqmm size pvc insulated unsheathed copperconductor to common earth and connecting to earth dolly complete all as specified and directed. Note: Therate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing ofswitch and scoket including cutting chases in wallmaking good to disturbed surface and matching with existing surfaces. |
| 170 | All as per Ser item No 169 here-in-before but one 3 Pin Socket out let 5 Amps on the same board. |
| 171 | All as per Ser item No 169 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board. |
| 172 | All as per Ser item No 169 here-in-before but one bell/buzzer point controlled by onepush button on the independent board. |
| 173 | All as per Ser item No.169 here - in - before but one lightpoint controlled by two 2 - way switches,with wire 1.5 Sqmm size |
| 174 | All as per Ser item No 169 here-in-before butpoint wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly. |
| 175 | S&FSwitch Piano type2 way switch 5 amp230 vcomplete all as specified and directed at Site. |
| 176 | Supply and fixSwitch Piano type, single pole, one way 5 Amp complete all as specified & directed. |
| 177 | S&F Switch pianotype , singlepole , one way15 Amps complete all as specified and directed. |
| 178 | S&FSocket out let2-in-1 2/3 pin 5 Ampscomplete all as specified and directed. |
| 179 | S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed. |
| 180 | S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed at site. |
| 181 | S&Fin replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed. |
| 182 | S&FCeiling rose,3 terminal PVC/polycarbonatecomplete all as specified and directed. |
| 183 | S&Felectronic regulator step type230 Volts single phase120 wattcomplete all as specified and directed at site. |
| 184 | M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site. |
| 185 | S&F in replacement ofsheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified anddirected at site. |
| 186 | M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm diaas per site requirement along walls/ceilingetc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surfaceconduit to be done to match with walls/ceiling existing surfaces.(iii) Two run of wire (phase & neutral) and one run of wire (earth conductor)be measured as one length) |
| 187 | All as per ser item No-186 here-in-beforebut 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire. |
| 188 | All as per ser item No-186 here-in-beforebut 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire |
| 189 | All as per ser item No-186 here-in-beforebut 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire |
| 190 | Supply and fixMCBDB SPN 4 way double door withmetal door suitable forhousing of MCBsgrouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed |
| 191 | Supply and fix MCBDB SPN 12 way double doorwith metal door suitabl forhousing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcompleteall as specified and directed |
| 192 | Supply and fix MCBDB SPN 8 way double doorwith metal door suitabl forhousing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcompleteall as specified and directed |
| 193 | S&F in replacement ofMCB SP 6 to 32 Amps "C" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 194 | S&F in replacement of MCB DP 40Amps "C" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles. |
| 195 | S&F in replacement of MCB DP63 Amps "C" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 196 | S&F in replacement of LEDtube light fitting 18/20watt 230 Volt decorative ultra slim linear LED Lighting withaluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting upwith twin core twisted flexible copper conductor cable with suitable sizecomplete all as specified and directed at site. Make : Cat/part No. LUMILINEPLUSBS18WLED865SPCSS of Havells or equivalent in Philips/LUKAR/C&S |
| 197 | S&F in replacement of Lienear & compact9 wat LED mirror light with decorative grey end caps,polycarbonate body and ribbed opal diffuser including 2/3 core flexible copperwire with flexible pipe ceiling rose to light fittings complete all as specified and directed at site. Make :Cat/part No. LUMILINEBS9WLED865SPCWH of Havells or equivalent in philips/Wipro/Jaguar |
| 198 | S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting upwith 2/3 core twisted flexible copper conductor cable with suitable sizeofflexible PVC/steel Conduitcomplete all as specified and directed at site . Make : Philips Cat part No. CWLL01V109XX or equivalent in Havells/ HPL |
| 199 | S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device.luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site. Make : Havells CatNo:-ENDURACITYLITE -PLATPLUSSL35WLED 757SASYBOPCor equivalent in Philips/C&S |
| 200 | S&F LED Porch light fitting 6 W made up of polycarbonate,complete all as specified and directed at site. Make : C&S Cat Part No.CG80B6WLED or equivalent in Philips/Havells |
| 201 | S&F in replacementDecorative wall light fitting CT2 10 W made up of polycarbonate,complete all as specified and directed at site. Make : Havells Cat Part No.LHDL03160099 or equivalent in philips /Wipro |
| 202 | M&L forrepair/greshing of ceiling fan of any size sweep single phase.Celing fan of any size opening from any hight or any locations, fan opening from hook, clamp & refixing the same after cleaning and greshingwithrequird necessary cutting/welding/granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as perspecified and directed |
| 203 | S&F in replacement Metal body ventilating airfan single phase250 mm sweepcomplete with louver shutter. Quoted rate has been inclusive of all labour charges for making of hole in existing building forfixing of exhaust fan, as per suitablesizefan base after cutting of brick/stone wall /suitable size as required, complete all as specified and directed. Make : Havells model ventil Air - DB or equivalent as per list of "Makes". |
| 204 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 205 | S & F for Modular Switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 206 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 207 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 208 | S & F forModular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 209 | S & Ffor modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 210 | M & L forSub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etctwo runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 211 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 212 | S&F in replacement of Ultra slim LED panel tube light fitting 36watt 230 Volt made from extruded aluminium housing frame (recesss/pendant) 2" x2" Complete with all accessories internally pre-wired and inncluding connecting upwith twin core twisted flexible copper conductor cable with suitable sizecomplete all as specified and directed at site. |
| 213 | Taking down ceiling fan/ exhaust fan of any sweep, keeping with safe custodyand refixing the same with replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan complete all as specified and as directed. |
| 214 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
