Sealed Tenders Are Invited From Principale Manufactures Having Certificate Of Registration And Those Who Are Having Bis Isi License For Manufacturing Im Ii Hand Pump And Spares And Gi Pipes In Various Place Or Their Authorized Agents With Specific Mou In , guntur-Andhra Pradesh

Sealed Tenders Are Invited From Principale Manufactures Having Certificate Of Registration And Those Who Are Having Bis Isi License For Manufacturing Im Ii Hand Pump And Spares And Gi Pipes In Various Place Or Their Authorized Agents With Specific Mou In Srikakulam District Excluding All Taxes For Entering Into Rate Contract Agreement-1 Head Assembly With Third Plate Including Cover & Cover Blot 2 Hex Bolt ( M12 X 20 ) As Per Is 1363 3 Hex Bolt ( M12 X 40 ) As Per Is 1363 4 Hex Nut ( M12 ) 5 Washer ( 4Mm Thick ) For M12 Bolts 6 Front Cover 7 Third Plate 8 Handal Assembly ( With Out Axle ) 9 Chain With Coupling 10 Spacer For Handle Assembly 11 Water Tank Assembly 12 Stand Assembly - Normal 13 Stand Assembly - Telescopic 14 Socket ( Riser Pipe Holder ) 15 Connecting Rod 12Mm 3Mts Long ( Electro Galvanizing Bright Bar ) Along With M12 X 50 Long And M12 X 20 Long Hex Coupler At Either End Welded ) 16 Hex Bolt M10 X 1.5 X 40 ) Is 1364 ( Part I ) 17 Cylinder Body With Brass Liner ( The Brass Im-Ii Liner Shall Confirm To Grade Cu Zn 30. As Of Is 404 / 1981. It Shall Be Temper Anneled ) 18 Reduced Cap 19 Handle Axle With Two Nuts And One Washer 4Mm Thick 20 Pluger Rod 450Mm Long With Two Couplers Of M 12 X 20 21 Plunger Yoke Body 22 Upper Valve 23 Check Valve 24 Check Valve Sheet 25 Spacer For Cylinger Assembly Suitable For Nitrile Rubber Pump Bucket 26 Follower 27 Rubber Seat Retainer 28 Pump Bucket 29 Sealing Ring 30 Rubber Seating ( Upper Valve ) 31 Rubber Seating ( Lower Valve ) 32 Cylinder Assembly ( Complete Unit Inclusive Of Stainless Steel Plunger Rod 12Mm Dia With Nitrile Rubber Pump Bucket ) 33 Handle Axle Washer - 4Mm Thick To Suit M12 Is: 2016 34 Prevailing Torque Steel Hex Lock Nut M10 X 1.5 ( Is: 7002 / 1972 ) 35 Single Side Shielded Bearing Confirming To Is 6456 / 1972 Sil, Hmt, Nbc, Mb, Tat, Urb / Sbl Or Any Other Make Approved By Unicef And Acceptable To Sgs ( India ) Ltd., 36 Upper Valve Assembly With Nitrile Rubber Pump Bucket ( Compraising Of Plunger Yoke Body, Upper Valve, Rubber Seating, Spacer And Follower ) 37 Lower Valve Assembly ( Confirming Rubber Seat Retainer, Rubber Seating, Check Valve And Check Valve Seat ) 38 Ss Rod 1.0 Meter Length 39 Manufacture, Supply And Delivery Of Special Toolset For Installation And Maintance Of Im-Ii Hand Pumps As Per Unicef Specifications, Excluding Taxes 40 12 Pipe Wrench 41 18 Pipe Wrench 42 24 Pipe Wrench 43 12Mm Hand Bottom Die Set With 2 Piece Die 44 Double Ended Spanner M17 X M19 45 Big Screw Driver 46 Small Screw Driver 47 300Mm Hack Saw Frame 48 Hack Saw Blades 49 250Mm Triangular File With Handle 50 1Kg Hammer With Handle 51 3 Pipe Vice 52 Multi Purpose Grease ( 5Kg Tin ) 53 3Mm Thick Nylon Rope ( In The Form Of 100Mts ) 54 Lifters For Lifting 32Mm Dia Gi Pipes 55 32Mm Tap Sets With Handles ( Bsw ) 56 12 Adjustable Wrench 57 Gi Extension Flangers 9 Rise Suitable For Telescopic Stand 58 Gi Extension Flangers 1 Rise Suitable For Telescopic Stand 59 1 / 2 X 6 Chisels 60 40Mm X 12Mm Dia Hexagonal Rod Couplers 61 Manufacture, Supply And Delivery Of Isi Marked Fully Hot Dip Galvanized Deep Well India Mark-Ii Hand Pump Assembly Complete Unit With 10 Nos Of Connecting Rods ( Bright Bars ) Of 12Mm Dia, 3Mts Length Each Confirming To Is: 9301 / 1990 With Its Ammendments / Revisions Up To Date Including Bis Packing, Loading And Unloading And Stacking Charges And Excluding All Taxes And Manufactures Identification Mark Shall Be As Per Bis Specifications With Telescopic Stand Assembly. ( New Im-Ii Hand Pump Set ) 62 Manufacture, Supply And Delivery Of Galavanized Mild Steel Pipes Medium Class Of 32Mm Dia Meter Confirming To Is: 1239 / Part-I / 1990 Continously Welded / High Frequency Induction Welded ( Hfivv ) Type And Screwed At Both Ends As Per Is:554 And One End Fitted With Socket ( Medium Class ) Manufactured From Seemless Pipe As Per Is: 1239 / Part-2 / 1992 And Out Side Diameter Minium 42.9, Wall Thickness 3.20Mm And Swg 10, Nominal Mass Of Steel Tubes Plain End 3.1 Kg / Mtr, 323 Mtr / Ton, Screwed And Socketed 3.13 Kg / Mtr, 319Mtr / Ton, No.Of Pipes 50 Per Ton Bundle, 49 Socket Minimum Od Mm And 51 Minimum Length Mm And Other End Fitted With Plastic Ring ( Each Pipe Should Bear Isi Mark And Manufactures Trade Mark ) In 3Meters Length Including Loading, Unloading Charges Transportation And Excluding All Taxes Etc.

Refer document

INR 25000.0 /-

Refer document