Public Works Department-PWD has published Construction Of Combind Office Building At Tihra In Tehsil Dharampur Distt. Mandi (Hp) C/O Of Balance Work Of Building Portion, Water Supply And Sanitary Installation ,Septic Tank, Rain Harvesting Tank P/F Solar Water Heating System And Protection Wall. Submission Date for this Tender is 04-04-2022. Building Work Tenders in dharampur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Apr-2022 | SBD | Technical Bid | 04-04-2022 |
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides,including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 2 | Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 3 | Earth work in excavation for all type of road structure such as retaining walls, Breasts walls,culvrts, drains, Parapets, Etcetrain all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and including entire carriage of material within all leads and lifts and other incidentalsThe rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GSTor other taxes imposed by the Government. |
| 4 | Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of30x30x5mm (Thirty into thirty into five millimetre) sizeIn foundation,footings bases of columns etcteraand mass concreteso as to give a fair finish including centring, shuttering, strutting andproppingand centringetectera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforcedand plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 5 | In flat surfaces such as soffits of suspended floors,roofs,landing and the like floor upto any thickness upto all floor levels. |
| 6 | Vertical surfaces such as walls (any thickness) partition and the like includingattached pilasters, buttresses plinth andstring courses and the like in all floor heights. |
| 7 | Providing and layingmechanically mixed andvibrated cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specificationincluding curing complete but excluding cost of form work in foundation and plinth including all heights/depthsincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 8 | Providing and layingmechanically mixed andvibrated cement concrete1:5:10 (One cement : five sand : ten crushed stone Agreegate)in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including cost of form work in foundation and plinth including all heights/depthsincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 9 | Providing and laying reinforced cement concretemechnically mixed vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring complete,all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of materials within all leads and lifts and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 10 | Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring complete,forattached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinthlevel to all floor levels excluding costof centring shuttering finishingincluding entire carriage of materials within all leads and lifts and other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 11 | Providing and laying tor steel made ofTATA reinforcement for reinforcemed cement concrete work including bending, binding straightning and placing in position complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 12 | Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls,retaing walls and Breast wallswith 110mm (One hundred tenmillimeter) diameter PVC Pipe extending through the full width of structures with slope of 1(Vertical) : 20 (Horizontal) towards drawing face complete as per drawing and technical specifications clauses 614, 709, 1204.3.7including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 13 | Back filling behind abutment , wing walls andreturn walls complete as per drawings and technical specification Clause 1204.3.8. with Granular Materialincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 14 | Stone /Boulder filling under floors dry hand packed including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 15 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six course sand : Twelvegraded stone aggregate 20(Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Six course sand) and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 16 | Providing and fixing ECO-5000 Series Windows grill should be provided with grill made of 10mm (ten) millimetressquare M. S.bars welded to at 150mm (One hundred fifty ) millimetres Centre to centre 6mm x 12mm(sixintotwelve) millimetresM.S, flat total frill unit should be power coated and fixed to window frame woth screws completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 17 | Providing and fixing 19mm ( Ninteen milimetres) thick terramite resistant water proof commercial ISI marked IS NO 1659 of unipy or green ply prelaminated board both side( bwp phenol bonded exterior/interior grade) Action Tesa, Makepanelled shutters with frames of Ist class deodar wood for doors includingbright finished/ black enamelled iron hinges with necessary screws 40mm ( Forty milimetres ) thick including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. |
| 18 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than gradeAC 10 asper IS : 1868) aluminium lever handles of approved quality with necessary screws etc. completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 19 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 20 | Providing 40x3 (Forty into threemillimetres) flat iron hold fast 40(Forty) centrimetres Long including fixing to frame with 10(Ten) millimetres diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15 ( Thirty into ten into fifteen) centimetres. 1:3:6 ( one cement : three sand: six graded/crushedstone aggregate 20(twenty millimetres) nominal size including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 21 | Providing and fixing 150(One hundred fifty) millimetresbright finsihed hard drawn hooks eyes brass including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 22 | Providing and fixing 35 (Thirty five) millimetres thick including black enamelled M.S. butt hinges flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutter including carriage of material up to all leads and lifts and as per direction of Engineer in chargeThe rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 23 | Providing and fixing 300×16mm (Threehundredinto sixteen millimetre) nominal size.aluminiumsliding door boltspowder coated colour or shade with bolts and nuts screws etcetera completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals . The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 24 | Providing and fixing to position bright finishedaluminium tower bolts ( barrel type) with screws etcetra completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 25 | 200x10mm (Two hundred into ten millimetres) nominal size. |
| 26 | 150x10mm( One hundred fifty into ten millimetres) nominal size |
| 27 | Providing and fixing 125One twenty five hundred) millimetresaluminium handles anodized/ power couted transparantincludingentie carriage of material withall leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in -Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax ,Goods service taxesor other taxes imposed by the Govt. |
| 28 | Providing and fixing 100(One hundred) millimetre aluminium handlesanodized/ powder coated transparentincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 29 | Providing and fixing 12 mm (Twelve)millimetresthick wall panellingwith water proof terimate resitant plywood with 4mm (four) millimetres thick vineer of approved brandof soft wood frame fixing with rawal plugs on wooden pegs and screwed and showing 8mm (eight) millimetres wide and 12 (( twelve) millimetresdeep grooves of required patteran in elevation and finished teak wood beading out of 25x12 (Twenty into twelve) millimetres /cornishout of 75x60mm (seventy five into sixty)millimetres of different pattern in top middle and corner joints including polishing and painting grooves complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 30 | Providing and fixing 18 mm ThickPre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. Complete ( Frames, backing or studding to be paid separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 31 | Providing and fixing 12 (Twelve) millimetres thick 150 (One hundred fifty) millimetres wide palmet with 25(Twenty five) millimetres diameter wooden curtain rods and brackets including fixing 25x3 ( Twenty five into three) millimetres MS flat at 10(Ten)centimetreslong and plugs etc complete in first class deodar wood , including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 32 | Providingand fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-incharge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 33 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm and 12mm x 12mm ( ninteen into ninteen and twelve into twelve) millimetres M.S. solid square bar with a clear height of 85cm (eighty five centimetres) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm ( forty into six millimetres)size complete with a applying priming coat of red lead paint as per drawing specificationupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 34 | Providing and fixing 75mmx60 mm withsecond class Indian teak wood rounded hand rails in straight length complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 35 | Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 36 | Providing and laying 8 mm ( Eight) millimetres thick HDF laminated wooden flooring with Green ply of Action Tesaincluding fixing with iron screws complete with including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 37 | Providing and laying Precast terrazzo tiles ( 300 X300X22 mm) 22 mm thick with graded Marble chips of sizws upto 12 mm in skirting and risers of steps on a bed 12 mm thick cement Mortar 1:3 ( hydraulic compressed 20 (Twenty) millimetresthick with marble chips of specified sizes laid in floors, treads of steps and landintgs on a bed of 25 (TwentyCement: five )millimetres average thickness of cement mortar 1:6 (onecement :six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles(wherevCourse sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete with tiles of light shade pigment using white cement as directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 38 | Providing and laying 20mm (Twentymillimetres) thick kota stone55x55cm (Fifty five into fifty five centimetres) minimumsizeflooring mirror polished finshed of uniform colour laid on 12 mm (Twelve millimetres)average thick base of cement mortar 1:3 ( One cement : three coarsesand) laid over andjoints with grey cement slurry mixed with pigment to match the shade of slab includingrubbing and polishing complete in all floor levelin all heightsincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 39 | Providing and laying 40(Forty) millimetres thick Cement concrete flooring 1:2:4 (onecement : twosand:four graded stone aggregate 20 (twenty)millimetres nominal size)laid in one layer finished with a floating coat of neat Cement includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt |
| 40 | Providing andfixing white/ colouredGlazed tiles300mm to 600 mm ( three hundredmillimetresto six hundredmillimetres) thickin skirting risers of steps and dado 12 (Twelve) millimetresthick cement mortar 1:4 (onecement :four sand) and jointed with cement slurry @ 3.3 Kg/sqm of make KAJARIA , Nitco, Somani, Johnson includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 41 | Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet roofing as per structure designthrough profile coloured quoted high tensile steel zink allimimun alloy coating steel roofing with trapezol corrugation of maxium ptich 90( ninety) millimetres centre to centre and minium depth of 30mm ( Thirty millimetres) with returned LEG and sealant groovs for proper side overlap single sheet to be provided up to 10 Mtrs ( Ten millimetres) from ridge to eves for avoidingends overlaps and fixing of sheet be with self drilling and self tapping galvanised or zink alloy coated fasteners ofsize 5.5mm (Five point five millimetres) dia 5.5mm (Five point five millimetres) length with EPDM seal complete with all accesories as requiredas per direction of Engineer-in-Charge in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 42 | Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA/JINDAL Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coatingincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as requiredincluding entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 43 | Providing and fixing valleys 60cm (Sixty centimetres) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/JINDAL Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (Six millimetres) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required in all heightsincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 44 | Providing and fixing flushing 38cms (Thirty eight centimeters) overall with 0.60mm (Zero point six zero millimeters) thick prepainted steel sheetmade of TATA make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) micron primer coating plus back coat polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six milimetre) dia and prepainted GI limpet and bitumen washer complete with all accessories as required including entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 45 | Providing and fixing 15(Fifteen) millimetreswide 45(forty five) millimetresoverall semicircular plain GI sheet gutter with iron brackets 40X 3(forty into three) millimetressize bolts and nutts and washers etc including making necessary connections with rain water pipe complete as per design in 0.63 mm ( Zero point six three millilmetresthick sheet , including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 46 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) 6 mm thick Cement bonded wood particle board as per IS:14276including entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 47 | Providing and laying cement water proofing treatment withDr. Fixit Fastflex or equavelent @ 6-7sqm/kg (Six to seven square metre per kilogramme) with two compentent polymer modified comentitious coating consisting of cementitiouspower and a polymer liquied in two coatsfor first coatclean and situate surface and than applying a coat of Dr. Fixitand the same process shall be extended up to 300 ( Three hundred)Millimetres vertically the second coat shall be applied in oppsitedirection after 4 to 6 ( four to six) hours of application of frist coat than sprinkle sand on top surface of applied Dr. Fixitthan apply cement mortor 1:4( one cement istofour sand) and admixed with two hundred milliliters Pidi proofLW @ 200 ( Two hundred) Milliletres per 50(fifty) Kg bag complete as per architect drawing complete in all respect including entire carriage of material with in all leads and lifts and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 48 | Providing and fixingon wall face110mm (one hundredten milimeters dia)unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (ten)millimetres gap for thermal expansion,Single socketed pipes made of Finolex, of working pressure not less than 4.50(four point five zero)kilogram per square centimeterincluding filling the joints with approved adhesive complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 49 | Providing and fixing on wall facesunplasticisedPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milllimetres) gap for thermal expansion.Plain bend 110 (one hundred ten )millimetres dia Finolex, accessories for rain water pipes including filling the joints with approved adhesive complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 50 | Bend 110 mm ( One Hundred ten millimetres) Dia |
| 51 | PlainShoe110mm ( One Hundred ten millimetres) Dia |
| 52 | Providing and fixing 110( one hundred ten) millimetresdia PVC clamp of approved design of makeFinolex,accessoriesupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 53 | Steel work welded in built up sections, made of TATAtrusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofred lead paint upto all floor level in all heights In grating ,frames, guard bar, ladder, railing,gates and similer work in building complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 54 | Steel work welded in built up sectionsmade of TATA,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofred lead paint upto all floor level in all heights In trusses and truss purlins complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 55 | Providing and fixingdoor frame fabricated from sections roll formed out of 1.2 mm (one point two millimetre) thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sqm (one hundred twenty gram per square metre). The overall size of section should be 80x50 mm (eighty into fifty millimetre) and 105x60 mm (one hundred five into sixty millimetre) with rebate of 37 mm (thirty seven millimetre) for shutter. The frame section should be cut to length and metre joint with corner bracket made of CRCA electroplated. The frame should be provided with 3 (three) number of M.S. powder coated 4" (four inch) butt hinges of 2 mm( two) millimetresthickness welded to frame and 6 (six)number of 1.2 mm( one point two) thick CRCA electroplated stiffeners should be welded to frame and 6 (six) number 8" (eight inch) MS holdfasts with spilt end tail welded to stiffeners plates and 1(One) number aldrop receiver. Each frame should be provided with 25x50 mm(twenty into fifty) millimtrestie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat each primer completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 56 | Providing and fixing ECO-5000 ( Five thousand) Series Windows fabricated from roll formed sections made of Galvanized steel colour coated / powder coated (Base steel as per 513"D" quality Galvanized as per IS 277 with Zinc of 120 gram/sqm (One hundred twenty gramme per square metreswith total coated thickness of 0.60mm (zero point six zero Coated section should be with primer coat of epoxy primr of 5-7 (five -seven) micron thick finish apinted with polyster paint of 12-16 microns thick and black coated with alkyd backer of 5-7 (five -seven) microns, or powder coated with pure polyster powder up to 50-60 (fifty -sixty) micron thick. Section for frame should be of 98x50mm,(ninety eight into fifty) section for mullion should be of 46mmx70mm 0.58mm(forty six into seventy into zero point five eight)thickness, section for shutter frame should be of 46mmx46mmx0.58mm,( forty into forty six into zero five eight) millimetres section for fixed glass beed should be of 18mmx25mmx0.58mm(Eighteen into twenty fiveinto zero point five eight)millimetresinto twenty and section for fly mesh shutter frame should be 20mm x 40mmx0.58mm. (Twenty into fortyinto zero point five eight) millimetresframes and mesh shutter section 18mmx6mmx0.58mm (Eighteen into sixinto zero point five eight)millimetresshould be cut to length and mitre joint with corner bracket made of polypropylene. Glass shutter should be mitre joint with corner bracket made of CRCA electroplated. Mullion section should be jointed with frame/mullion using nylon. Mullion cap Ethyl Propylene Diamine Monomer(EPDM) gasket should be used all arround glass in shutter between frame and glazed shutter and both sides of fixed glass. Rubber gasket should be used around fly mesh to fix mesh in mesh shutter. Each glazed shutter should be provided with MS powder coated friction hinges 1 (One)set, High grade aluminium coated handles 1(one) number. Each mesh shutter should be provided with S.S. Pivot hinges 1(one)set. Sec-color make handle shall be provided per shutter. Window frame should be fixed to brick/concrete masonary by using nylon self-expanding caps and driving MS electroplated 80mm long screw into the caps through frames complete aincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 57 | Providing and fixing ECO-5000 Series Windows mesh shuter should be provided with a stainless steel 32(thirty bwo) gauge fly mesh of 304 (three hundred four) grades with 144 (one hundred forty four) holes per square inch complete and carriage of material within all leads, lifts and other incidental charges complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals .The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 58 | 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :threesand) upto all floor levelincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 59 | 15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or roundedangles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar1:6 (One cement : sixcoarse sand) upto all floor level in all heightsand curing completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 60 | 15mm (Fifteen millimetres) cement plaster in single coat on fairside of brick / concrete /stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers,and/or roundedangles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar1:6 (One cement : sixcoarse sand) upto all floor level in all heightsand curing completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 61 | 15mm (fifteen) millimetres Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth cement mortar1:3(One cement :threesand)with floating caotneat cementslurry upto all floor level in all heightsand curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 62 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 63 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface throughly cleaningoil grease, dirt ,dust and other foreign matter and sand papering and knotting with ready mixed paint brushing primer pink for enemal upto all floor levelsmakecompleteas directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 64 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm madeofNerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimar.over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 65 | Finishing walls with water proofing emulsionpaint Two or more coats applied @ 3.84 kg/10 sqmmadeofNerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimar. of required shade includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 66 | Finishing with Deluxe Multi surface paint Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat ofSpecial primer applied @ 0.75 ltr /10 sqm system for interiors and exteriors using Primer as per manufacturers specificationsincludingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 67 | Distempering two coatswithSynthetic/Acrylicdistemper ofapproved brand and manufacture and of required shade onundecorated wall surface to give aneven shade over and including a priming coat with distemper primer ofapproved brand and manufactureof ASAIN/NEROLACafter thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface evenandsand papered smooth upto all floor level in all heights including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 68 | White washing with lime on undecorated walls two coats to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matterincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 69 | Applying Birla white wall care puttyover plastered surfaceafter thoroughly brushing the surface free from mortar drooping, dust, loose materials and other foreign mattersand papered smoothto give fine finish to the surface complete upto all floor level in all heightsincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 70 | Providing and fixing Glass Reinforced Concrete ((G.R.C) Screens in approved size, pattern, design, thickness and color or M/S Unistone make or equivalent. The Screens should be made from "53(fifty three) grade" White Portland cement manufactured by "JK Cement" ACC, L&T, Gujarat Ambuja, Vikram,Birla, JK Cement, JP Rewa., Shree, J.K. Lakshmi, M/sBinani Cement. Quartz. Fine Silica Sand, Alkai Resistant Glass Fiber manufactured by Saint Gobain" or equivalent. Super Plasticizers manufactured by BASF or equivalent. Polymers manufactured byBASF or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) or equivalent. The material casting should take place in Synthetic Rubber/FRP Mould manufactured by "Reckli" or equivalent. The fixing of Screens should be "Dry fixing" i.e. to be done with Stainless Steel (SS- 304) "L" shaped Clamps, dash fasteners and pins as per design and technical specification upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 71 | Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III): six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres)nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government. |
| 72 | Constructing Coursed rubble hammer dressed "U" shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter )in cement mortar 1:6 ( OneCement : Six approved Sand) and inside plastering with cement mortar 1:3 (OneCement:Three approved Sand) including earth work and laying 10 cm(Ten Centimatre ) cement concrete in 1:5:10 (OneCement : Fiveapproved Sand : Tengradedcrushed stone aggregate) of 40 mm (Forty millimetres)nominal size and7.5 cm (seven Point Five Centimatre )cement concrete 1:2:4 (OneCement : Twoapproved Sand : Fourgradedcrushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with afloating coat of neat cementcomplete as per standard designupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 73 | Providing and fixing Solar heating panel(BOSCH) approved ISI make completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 74 | Providing and laying in trenches G.I. pipes complete with G.I. fittings 20mm (Twenty )millimetres nominal bore of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube fittings (earth work in trenches to be measured and paid separataly) upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 75 | Providing and fixing to wall ceiling and floor G.I. pipes complete with G.I. fittings 15mm (fifteen )millimetres nominal bore tube fitting and clamps of BST Jindle (Hissar) TATA Steel tubes ltd. Parkash Surya as per IS code including making good the wall ceiling and floorupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 76 | Providing and laying in trenchesG.I. pipecomplete with G.I. fittings 15mm (Fifteen)millimetres nominal bore of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube fittings (earth work in trenches to be measured and paid separataly) upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 77 | Making connection of G.I. distribution branch 25 to 40 mm (Twenty five to forty) millimetresnominal borewith G.I. main of following sizes by providing and fixing tee, ncluding cutting and threading the pipe etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 78 | Providing and fixing1216 ( one thousand two hundred sixteen) 16mm (Sixteen millimetres) outer dia Plytheline-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized Pryaj make with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc for internal work but excluding the cost of fittings (internal work) pipes exposed on wallincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 79 | Providing and fixing1216 ( one thousand two hundred sixteen) 16mm (Sixteen millimetres) outer dia Plytheline-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized Pryaj make with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc for external work but excluding the cost of fittings (external work) pipes exposed on wallincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 80 | Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan of size 580x440 mm of cera makewith integral type foot restswith 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 81 | Providing and fixing vitreous wash down of Parryware, Hindware Sanitaryware, Neycer, Cera. makecat No S 1013115 white colour studio set along with C.P. JET, SEAT COVER, CISTERN and twin flushing valves etccetra. complete in all respect, water closet ( European Type - WC pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand)(with cistern, seat cover and flush fitting) Star White including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 82 | Providing and fixing 10 litres capacity E.W.C. cat No.92070 low level flushing cistern of Parryware, Hindware Sanitaryware, Neycer, Cera. makewith fittings with a pair ofMild steel brackets with fittings such as lead valve syphon 15 (Fifteen) millimetres nominal size PVC valve with potythine float, with push button couplings for connection with inlet andoutlet,over flow pipe 40mm (forty millimetres) dia CP Flush bend including cutting holes in walls and making good the sameand connecting the flush bend with cistren and closet(over flow pipe to be measured and paid for separately)upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 83 | Providing and fixing G.I.inlet connection for flush pipe with W.C panof Unik, KS, AMCO, AVR, NVR, RR, SUW makeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 84 | Providing and fixing vitreous China flat back lipped fronturinal basin ofHindware/Parryware /CERA Sanitary ware,Naycer make )including connection the urinal with waste pipe by means of white lead mixed with chopped hemp Flat back type of size 430mm x 260mm x 350mm.( four hundred thirty into two hundred sixtyinto three hundred fifty) millimetres upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 85 | Providing and fixing viterous China wash basin (450x300 mm ) (four hundred fifty into three hundred millimetre)CATNo. 1007 and PedestalCAT No. S2090101 In White Shade of superime qualityParryware, Hindware Sanitaryware, Neycer, Cera with C.I. brackets, 15 mm (Fifteen)millimetres C.P. brass pillar taps, 32 mm (thirty two) millimetres C.P. brass waste of approvedpattern,including cutting holes & making good the same and carriage of materials within all leads and lifts complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 86 | Providing and fixing viterous China wash basin White Vitreous China Angle back wash basin size 600 x 480 mm (six hundred fifty into four hundred eighty) millimetre CATNo. 10086 and Pedestalin White Shade of superime quality ofParryware, Hindware Sanitaryware, Neycer, Cera with C.I. brackets, 15 mm (Fifteen)millimetres C.P. brass pillar taps, 32 mm (thirty two) millimetres C.P. brass waste of approvedpattern,including cutting holes & making good the same and carriage of materials within all leads and lifts complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 87 | Providing and fixingpedestal for wash basin completely recessed at the back for the reception of pipes and fittings foCera makeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 88 | Providing and fixing steel Sink of DIAMOND make as per IS 13939of approved designand size 610x455x225 (Six hundred into four hundred fifty five into two hundred twenty five) including carriage of materials up to all leads and lifts and as per direction of Engineer incharge. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 89 | Providing and fixing CP brasswaste for wash basin or sinkof Jaquar, Jal,ESS ESS make32 ( Thirty) Millimetresdia with half thread 32( Thirty two) millimetresincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 90 | Providing and fixing CP brass soap dish of Jaquar, Jal,ESS ESS make with CP brass brackets fixed to wooden cleats with CP brass screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 91 | Providing and fixing C.P. Paper Holderof Jaquar, Jal,ESS ESS makeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 92 | Providing and fixing 600 x 450( sixhundred into four hundred fifty ) millimetres Ready made mirror of atul or Modiglass mounted on wodden plugs Cera make cat no B3510112 with C.P. brass screw including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 93 | Providing and fixing PTMT Towell railof Jaquar, Jal,ESS ESS make with C.P. Brass brackets fixed to wooden plugs with C.P. Brass 600 mm (six hundred) millimetreslong towel rail with total length of 645 mm(six hundred forty five) millimetres, width 78 mm (seventy eight) millimetresand effective height of 88 mm,(eighty eight ) millimetres weighing not less than 190 gms ( one hundred ninety) millimetresincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. . |
| 94 | Providing and fixing 100 (one hundred ) millimetres dia C.P. Grating Jaquar, Jal,ESS ESS make including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 95 | Providing and fixing white vitreous china squatting plate Urinal with integral rim longitudinalflush pipeof( Hindware/Parryware /CERA, Sanitary ware,Naycer make ) (Starwhite colour)upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 96 | Providing and fixing CP brass bib cock15(Fifteen) millimetresdia of Jaquar, Jal,ESS ESS make with wall flange and areator including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 97 | Providing and fixing CP brass bib tap with capstan head 15(Fifteen) millimetresdia of Jaquar, Jal,ESS ESS make with wall flange and areator including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 98 | Providing and fixing CP brass stop cock15(Fifteen) millimetresdia of Jaquar, Jal,ESS ESS make with wall flange and areator including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 99 | Providing and fixing uplasticised PVC connectionspipe with brass unions 45 (forty five) millimetres length 15 ( fifteen) millimetres nominal bore including entire carriage of material with in all leads and lifts and as per drawings and technical specificationsas perdirection of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 100 | Providing and fixingCP brass ball valve of Jaquar, Jal,ESS ESS make with flange including entire carriage of material with in all leads and lifts and as per drawings and technical specificationsas per direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 101 | 15(Fifteen) millimetresnominal size |
| 102 | 20( Twenty) millimetresnominal size |
| 103 | Providing and fixing 15(Fifteen) millimetresnominal size CP brass angle valve for bashinmixer and geyser point of Jaquar, Jal,ESS ESS make with flange including entire carriage of material with in all leads and lifts and as per drawings and technical specificationsas per direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 104 | Providing and fixing 25mm (Twenty five ) millimetresgun metal gate valve with C.I. Wheel of approved quality (screwed end) including entire carriage of material with in all leads and lifts and as per drawings and technical specificationsas per direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 105 | Providing, placing and fixing polyethylene water storage tank IS :12701 marked, made of Sintexweight not less than 64 ( sixty four) Kg with cover and suitable locking arrangement, and making necessary holes for inlet, outlet and overflow pipe, and with fitting complete, UV protected, rounded corneer maked with month and year of manufacture extra ribs on top and horizontaly for greater strength) and as per specification, drawings including carriage of material upto all leads and liftsand as per the direction ofEngineer -in-charge .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 106 | Providing and fixing 110 (One hundred ten) nominal diameter.PVC floor trap made of finlox/superme of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material upto all leads and liftsand as per the direction ofEngineer -in-charge. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 107 | Providing, laying 100 mm diametre and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. Completeincluding cost of cutting and making good the walls and floors including carriage of material upto all leads and liftsand as per the direction ofEngineer -in-charge. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 108 | Providing and laying 100 mm diametre S.W. pipe in cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stoneggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design including cost of cutting and making good the walls and floors including carriage of material upto all leads and liftsand as per the direction ofEngineer -in-charge. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 109 | Providing and fixing on sand cast iron span spigot andsoil waste and ventilatingpipes ( lead caulked joints to be measured and paid for separaterly)including filling the joints with spun yarn and cement mortar 1:2 ( one cement :two sand )including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 110 | 75 (Seventy five) millimetres |
| 111 | 110 (hundred ten) millimetres |
| 112 | 150 (hundred fifty) millimetres |
| 113 | Providing and fixing uPVC door bend with oval access door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked of Finolex make complete including fixing with approved adhesive etc.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 114 | 110 (hundred ten) millimetres |
| 115 | 150 (hundred fifty) millimetres |
| 116 | Providing and fixing uPVC plain single equal branch ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 117 | 110 (hundred ten) millimetres |
| 118 | 150 (hundred fifty) millimetres |
| 119 | Providing and fixing uPVC plain double equal branch ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 120 | 110 (hundred ten) millimetres |
| 121 | 150 (hundred fifty) millimetres |
| 122 | Providing and fixing uPVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 123 | 110 (hundred ten) millimetres |
| 124 | 150 (hundred fifty) millimetres |
| 125 | Providing and fixing uPVC plainbendISI marked of Finolex make complete including fixing with approved adhesive etc.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 126 | 110 (hundred ten) millimetres |
| 127 | 150 (hundred fifty) millimetres |
| 128 | Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred intoone hundred millimetre )Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 129 | Providing and fixingExhaust fan ISI marked including fixing with approved adhesive etc completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 130 | Providing and fixing stoneware gully trap grade "A" complete with C.I grating, brick masonry chamber in cement mortar 1:5 (one cement :five sand)and water tight C. I. cover with frame of 300mmx300mm( three hundred xthree hundred) millimetres size (inside) the weight of cover to be not less than 4.53(four point five three) killogrammeand frame to be not less than 2.72kg.(two point seven two kilogram) square mouth trap 150*100 mm ( one hundred fifty x one hundred milimetre)size P or R typeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment. |
| 131 | Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size)inside plastering 15mm (Fifteen millimeters) thick cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 900mmx800mm and 800mm (Nine hundred into eight hundred into eighthundred)millimeresdeep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frameto be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramm) with 200mm (Two hundred millimeters) thick walls of brick masonry using commonburnt clay building bricks in cement mortar1:3 ( One cement : threesand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 132 | Supplying cast iron cover without frame for manholes for frames of internal dimension 455 to 610 ( Four hundred fifty five into six hundred ten) millimetresrectangular C.I.cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg(twenty three Kilogramme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 133 | Constructing masonry Chamber 60x60x75cm (Sixty into sixty seventy five Centimetyres) inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
