|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 2 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457,complete as per the direction of Engineer-in- Charge Acid and alkali resistant tile In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 3 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 5 | 15 mm cement plaster on the rough side of single or half brick wall of mix :-1:6 (1 cement: 6 fine sand) including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 6 | Providing and fixing anodised aluminium duly power coated of required shade for door, windows, ventilators and partitions with extruded built up standard tublar and other section of approved make conforming to IS 1285 anodised transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15) fixed 1 with wawl lug and screws or with fixing clips, or with expension hold fastners including necessary filling up of gaps at top bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazinge/panelling, C.P. brass/stainless steel screws. All complete as per Archtectural drawing and the direction of Engineer-in-Charge for doors windows and ventilators and glazed partitions including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 7 | Providing & fixing glass panes with putty and glazing clips in aluminium doors, windows, clerestory windows, all complete with 5.5 mm thick glass panes including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeincluding carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works upto plinth level including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 11 | 40mm thick cement concrete flooring 1:2:4 (1cement : 2 sand:4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 12 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqmincluding carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Sunduhri Red/Lakha red in premium Area of slab over 0.50 sqm including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 14 | Extra for pre-finished nosing to treads of steps of polished granite stone complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 15 | Providing and fixing all weather proof ACP 4mm thick imported sign panel all weather proof multi colour computerrised reflective digital panel 3mm thick, mounted on power coated G.I. frame work with T-section with fastners fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wire and rawl plug etc complete as per the direction-of Engineer-in-Charge including carriage of materials with in all leads & lifts. |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20mm dia nominal bore including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 17 | 15 mm dia nominal bore. |
| 18 | Providing and fixing 20mm nominal bore brass ball valve (horizontal plunger type) High pressure with polythene plastic floatswith fixing etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 19 | 15 mm dia nominal bore. |
| 20 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 21 | Providing and fixing 15mm C.P. brass sink mixer wall mounted of approved quality and make (Cat No. AITIUS-ALSM101) copmlete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 22 | Providing and fixing 610x510mm \"Sumani brand\" bowl depth 225mm size Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.-32 mm dia including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 24 | Providing and fixing 32 mm dia. C.P. waste coupling for wash basin or sink including carriage of materials in all leads and lift as per direction of Engineer in Charge.ESS ESS-C-230A. |
| 25 | Providing and fixing 100mm sand CP grating for floor or nahani trap including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 26 | Providing and fixingPVC Finolex type \"A\" floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. 110mm X 90mm. |
| 27 | Providing and fixing 600x20mm C.P. Towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P.screwsincluding carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 28 | Providing and fixing towel ring fitting complete including carriage of materials in all leads and lift as per direction of Engineer in ChargeESS-ESS Catlogue No. AC-102. |
| 29 | Providing & fixing HA-wall mounted Activity mirror with flat polished edge, home Gym mirror bevelled Activity work out room wall mirror for fitness, dancing, Gymnastics, Yoga horizontally or vertically mirror of wall size of superior glass of approved quality complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 30 | Providing and fixing liquid soap dispenser of RED CROS wall mounted plastic ABS 400ml snap fittings of approved quality colour complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 31 | Providing and fixing high pressure PVC (Finolex) spigot and socket, waste and ventilating pipes including collar and clamps ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. :- 110 mm dia. |
| 32 | Door bend. |
| 33 | Plain bend |
| 34 | Coller |
| 35 | Tee |
| 36 | Providing and fixing ACP sheet 4mm thick pannel in aluminium door, window, ventilator, shutters and partitions etc with PVC neoprens gasket etccomplete as per Architect drawings and by the Engineer-in-Charge (Cost of aluminium snap beading shall be paid in basic item) partitions with 12mm thick partical board bwp phenol bounded exterior/interior grade both sidesincluding carriage of materials in all leads and lift as per direction of Engineer in Charge. |
