|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 2 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed. |
| 5 | Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames). |
| 6 | Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frames). |
| 7 | Taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal to store. |
| 8 | Taking up or down 20mm dia bore steel tubing and connections, including cleaning for refixing or removal to store. |
| 9 | Dismantling water tanks of capacity exc 500 & not exc 1000 litres and removing to store. |
| 10 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub base andfinishing even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as levelling course andfinishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 12 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete. |
| 13 | M & L for rendering 15mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete. |
| 14 | Supply only liquid water proofing compound (Make : Sika Latex Power) |
| 15 | M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 Sqm but n.exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete. |
| 16 | M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed in CM 1:3 complete all as specified and directed. |
| 17 | M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 |
| 18 | M & L Kota stone slab 18-22 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 19 | M & L for Marble tiles 30cmx20cmx20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6. |
| 20 | M & L for machine pressed interlocking tiles 300 x 300 x 30 mm thick with grey cement and pigmentover 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 21 | M & L for Providing, cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in cills, steps; seismic and other similar bands, plinth courses copings including necessary form work all as specified and as directed |
| 22 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete. |
| 23 | S&F 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the Engineer-in-Charge. Make Everest/Armstrong |
| 24 | S & F 12mm thick PVC decorative boards (Make : Century Brand Starke Prime) as in wall panelling and fixed on GI channels (Size 69 x 23mm x 2.00mm thick) fixed on wall with 600mm x 600mm spacing complete all as specified and directed. |
| 25 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colur PVC sheet reinforced with ms squre tube, supplying &fixing in opening as complete all as specified and directed. |
| 26 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rail. MS frame shall be covered with heat moulded PVC”C” channel having a PVC steel strip of 20mm width stuck inside with solvent cement for style and plain coloured PVC sheet for top rail lock rail &bottom rail on either side &as gap insert for top rail and bottom rail paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to style &rails with suitable PVC sheet beading. And jointed together with solvent cement, supplying and fixing in the frames at site as per specification &drawing |
| 27 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge. |
| 28 | S & F Aluminium handle cast type anodized 150mm size |
| 29 | S & F Aluminium, anodized, barrel tower bolts of extruded section 200mm long |
| 30 | S&F Butt Hinge extruded aluminum alloy with galvanized MS Hinge Pin anodised and fixed 100mm long |
| 31 | S & F Aluminum alloy, anodized, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy size 300mm long. |
| 32 | S & F 1000 litres capacity white rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) multilayered hoisted and fixed in position complete all as specified. |
| 33 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings on walls/ceilings or in floors including necessary cutting/chasing of walls and floors complete all as specified and directed. |
| 34 | Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings on walls/ceilings or in floors including necessary cutting/chasing of walls and floors complete all as specified and directed. |
| 35 | S & F of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 36 | S & F of 25mm dia Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 37 | S & F 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. |
| 38 | S & F 25mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed. |
| 39 | S & F 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed. |
| 40 | S & F as in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of lime concrete bedding complete all as specified and as directed Make : Hindware/Parryware/Cera |
| 41 | S & F as in repair5/10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets (Make:-Parryware/ Hindware /Jaguar) |
| 42 | S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed. |
| 43 | S & F in repair vitreous China Urinal, Half stall type, white incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and union for discharge pipe complete. |
| 44 | S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 45 | S & F in repair 15 mm dia bore fancy type chromium plated two way bib taps, cast copper alloy with crutch or butterfly handle screwed down, high pressure, screwed both ends for iron pipe or for unions. |
| 46 | S & F in repair 15 mm dia bore fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 47 | Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy typefor wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete. |
| 48 | S & F in repair 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat) |
| 49 | S & F PVC connections 15mm size with PTMT nuts of length 600mm complete. |
| 50 | M & L for 2 mm thick of Birlawhite putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings complete all as specified and directed. |
| 51 | M & L for preparing new plastered surface of wall and applying two coats of distemper oil emulsion white or tinted over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed. |
| 52 | M & L for preparing old plasteredsurfaces of ceiling and applying one coat of distemper oil emulsion white or tinted complete all as specified and as directed. |
| 53 | M & L for preparing newly plastered or previously untreated walls surfaces or fascia or roof or chajjas and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed. |
| 54 | M & L for preparing old decorated walls surfaces or fascia or roof or chajjas and applying one coat of cement base paint white or tinted complete all as specified and directed. |
| 55 | S&F in repair 125mm dia Stainless steel grating (double Q) fixed on floor trap/nahani trap in Cement mortar 1:6, all as specified and directed by Engr-in-charge. |
| 56 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore. |
| 57 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 110 mm bore dia. |
| 58 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75 mm bore dia. |
| 59 | S&F PVC (SWR) branch piece, single (singleY) equal or unqual of 110 mm bore dia. |
| 60 | S&F PVC (SWR) vent cowl of 110 mm bore dia. |
| 61 | S & F 110mm PVC (SWR) bends any radius provided with access door all as specified and directed by EIC. |
| 62 | S & F 75mm pvc (SWR) bends any radius provided with access door all as specified and directed by EIC. |
| 63 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in hard/dense soil |
| 64 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point |
| 65 | Returning, filling in, incl spreading, levelling, watering & well ramming in layers n. exc 25 cm in soil. |
| 66 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. |
| 67 | M & L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 |
| 68 | M&L for plain cement concrete M-15 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary from work as required complete all as specified and directed |
| 69 | M & L for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate |
| 70 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat |
| 71 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 72 | -Ditto- all as per item No 72 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 73 | M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface. |
| 74 | M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floorcomplete all as specified and directed. |
| 75 | M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. |
| 76 | M&L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection finishing even and smooth without using extra cement complete all as specified and directed. |
| 77 | S & F of 15 mm dia Fancy type chromium plated Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 78 | S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 79 | S & F white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. |
| 80 | S & F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etccomplete all as specified and directed.(Make : Jaguar/Hindware) |
| 81 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screw. |
| 82 | S & F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete. |
| 83 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colur PVC sheet reinforced with ms squre tube, supplying &fixing in opening as complete all as specified and directed. |
| 84 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rail. MS frame shall be covered with heat moulded PVC”C” channel having a PVC steel strip of 20mm width stuck inside with solvent cement for style and plain coloured PVC sheet for top rail lock rail &bottom rail on either side &as gap insert for top rail and bottom rail paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to style &rails with suitable PVC sheet beading. And jointed together with solvent cement, supplying and fixing in the frames at site as per specification &drawing |
| 85 | S & F Aluminium handle cast type anodized 150mm size |
| 86 | S & F Aluminium, anodized, barrel tower bolts of extruded section 200mm long |
| 87 | S&F Butt Hinge extruded aluminum alloy with galvanized MS Hinge Pin anodised and fixed 100mm long |
| 88 | S & F Aluminum alloy, anodized, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy size 300mm long. |
| 89 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work incl necessary form work and set in CM 1:4 complete |
| 90 | S & Frolled mild steel in Joist, channel, angle, or tee sections, fixed independently,without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated)conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified. |
| 91 | M & L for preparation of new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 92 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 93 | M&L for DWC HDPE pipes class SN-8 laidand jointed complete as per manufacturer instruction in trenches of 150 mm ID/180 mm OD of pipe complete. |
| 94 | M & L for soakage pit of size 1.8mtr dia and 3.00mtr deep in hard/dense soil removing excavated soil out side defence land, foundation in PCC 1:3:6/RR masonry in CM 1:4 and provn of loose filling with broken stone aggregate of gauge 80mm to 150mm andmaking soak well cover with PCC (1:3:6) type C-1 (using 20mm graded stone aggregate), 100mm thick (and filled by the rubbish to old soakage pits) complete all as specified and directed by Engr-in-charge. |
| 95 | M & L for Cement concrete Type B-0 1:2:4 as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work. |
| 96 | S & F of Framed work as in including moulding, cuttings, and made to shape as directed, such as grills, gratings, etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars and similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified. |
| 97 | S & F of Framed work as in ornamental structure including moulding, cuttings, and made to shape as directed with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars and similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified. |
| 98 | S & F of Pre-painted galvalume aluminum zinc coating GI based tile profile galvalum sheet 0.42mm thick of any colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape fixed with self tapping screws as specified. |
| 99 | S & F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape as directed by Engineer in charge and fixed with self tapping screws as specified. |
| 100 | M & L for applying two coat of synthetic enamel paint over one coat of red oxide primer incl preparation of surfaces of any description, over 10cm in width or girth,not otherwise described |
| 101 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement and making good the surfaces with existingsurface complete all as specified. |
| 102 | M & L for RCC Type B-1 1:2:4 as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses. |
| 103 | Use & waste form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter |
| 104 | M & Lbrick work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as spd and directed by EIC |
| 105 | M&L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membran comprssing of following :-(i)Removing of existing treatments including cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm.(iii) One layer of super thermolay APP modified water proofing membran with non polyster reinforcement of approved Make 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC 1:2:4 type B0 with sika latex power all as per manufacturer instructions.(iv) Applying two coat of bituminous anti-corrosive multi-purpose aluminium Coating (SuperSilverShield) @ 0.15 kg/sqm per coat over bitumen layers. |
| 106 | M & L preparation of new plastered or unplastered surfaces and applying two coat of exeterior emulsion paint on walls complete all as specified and directed. |
| 107 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm x 3.5 Core passing through DWC HDPE / in trench including necessary connection with lugs and cable gland etc complete all as specified and directed. |
| 108 | All as per item No. 107 above but of size 25 Sqmm 4 core. |
| 109 | All as per item No. 107 above but of size of cable 16 sqmm 4 core. |
| 110 | M & L for laying of HDPE double wall corrugated pipes in trench for UG cable protection conforming to IS-14930 Part-II with IP-67 having outer dia 50 mm and inner dia of 38 mm including necessary fittings such as couplers, bends etc complete all as specified and directed. Make: D-Rex/ Rudrax Polymers/ Finolex |
| 111 | All as per item No. 110 above but of outer dia 75 mm and inner dia of 63 mm |
| 112 | S & F outdoor type LT Feeder piller box of size 600x600x300mm deep, 415 volts, 3 phase, 4 wire 50 Hz having 04 Nos colour coded aluminium bus bar of capacity 600 Amps mounted on porcelain/ hygroscopic insulators with suitable number of holes for making connections of cables, made out of 3.15mm thick sheet steel CRCA and mounted on frame of suitable size made out of angle iron 45x45x6mm with 4 Nos legs embedded in PCC foundation 300mm below ground level and 300mm above ground level, duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, dust and vermin proof, front door with locking arrangement and two earth points by side of the box, cubical type with cable glands, sockets etc and with provision of cable entry from bottom, including painting steel frame complete all as specified. Note: (ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication. (ii) Excavation, earth work and PCC shall be measured and paid separately under relevent items. |
| 113 | Supply, installation, commissioning and testing of LT outdoor type factory made (CPRI approved) made out of CRCA sheet 3.16 mm thick dust proof, powder coated from both side, individual door, factory locking system with two side ventilationsuitable for working on 415 Volt AC supply including bus bar chamber and aluminium bus bar of capacity 400 Amps rating for phase and neutral mounted on hygroscopic insulator fixed in a separate bus bar chamber separate compartment for incoming and outgoing feeder prewired with suitable size of copper conductor cable including fitted on 50x50x6mm angle iron channel with PCC foundation and provision of lugs and bushing for housing the following :- INCOMING: (i) MCCB 100 Amp 36 KA, 4 Pole, 415 Volts, thermal and magnetic settings - 01 No (b)Voltmeter 0-500 volts with in built selector switch digital type - 01 No. (c) Ammeter 0-400 Amps with CT and in built selector switch digital type - 01 No.OUTGOING: (i) MCCB 63 Amp, 16 KA, 4 pole and thermal and magnetic settings -03 Nos (ii) MCB SPN 32 Amp - 02 Nos. |
| 114 | M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ PlazaNote:Cost ofmodular cover plates with frame and modular metal terminal flush boxes shall be inclusive in the rate quoted. |
| 115 | (a) One light/fan/bell point controlled by one switch 5 Amp single pole one way |
| 116 | (b) One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board. |
| 117 | (c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 118 | (e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 119 | Description all as per item No 115 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 120 | S & F modular switch piano type 10 Amps one way single pole 240 volts AC complete all as specified and directed. |
| 121 | S & F modular socket outlet 10 Amps 5 pin 240 Volts multi socket 2 pin+ 3 pin complete all as specified and directed. |
| 122 | S & F modular white cover plate with frame 6 module |
| 123 | S & F modular metal flush box for 6/8 module |
| 124 | S & F ceiling rose surface bakelite 65x50mm 2 to 3 terminal |
| 125 | S & F MCB single pole, 240 volts, up to 40 Amps, all as specified and as directed. |
| 126 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc withinstallation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 127 | S & F for wall mounted LED tube light fitting 10 watts batten for mirror type surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc withinstallation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 128 | S & Ffor exhaust fan heavy duty single phase 250 mm sweep, 240 Volts, AC with and includinglouvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site. |
| 129 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces ofwalls, floors etc complete all as specified and directed at site. |
| 130 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 131 | Taking down carefully copper/aluminium sub main wiring of any size fromsurface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 132 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed. |
| 133 | S & F for modular switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 134 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 135 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 136 | S & F formodular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 137 | S & Ffor lamp holder, PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. |
| 138 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 139 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 140 | All as per item Srl No. 14 above but cable for two runs of 4 Sqmm and one run of 2.5 Sqmm |
| 141 | S & F for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 142 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 143 | S & F for MCB tripple pole and neutral rated capacity 100 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 144 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 145 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 146 | S & F sheet metal enclosure for single pole and neutral with two pin and earth plug top and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 147 | S & F for ceiling fan, 230 Volts, 1200 mm sweep with service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed. |
| 148 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed |
| 149 | S & F for LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 150 | S & F for LED street light fitting 35 Watt 230 V AC outdoor type with high ressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket withimpact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 151 | S & F for wall mounted fan 450 mm sweep, single phase, 240 volts, 50 Hz, 1500 RPM with Air delivary not less than 90 CMM including necessary fixing arrangements and electical connectionas per manufacture specification compelte all as specifiedand directed. |
| 152 | S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 153 | M & L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. Belowground level connecting to GI Strip 32x6 mm dia size by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe light grade, 15 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stoned aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25 x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wiremesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion. |
