|
| 1 | FIRE HYDRANT PIPING & ACCESSORIES Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required. (Make: FGE/Crownsales/ MEC) |
| 2 | Providing, laying, jointing and testing in following sizes of MS Class \"C\" (heavy class) pipes Conforming to IS: 1239/3589 withaccessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required.. ( MAKE: TATA/ JINDAL/ ) |
| 3 | 25 mm |
| 4 | 80 mm |
| 5 | 100 mm |
| 6 | 150 mm |
| 7 | Proviidng ,Installing and commissioning ofFrist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with30 mtr long and 20 mm nominal internal diaheavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required...(MAKE: MINIMAX /MEC / FGE) |
| 8 | Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type \"A\") (MAKE: MINIMAX /MEC / FGE) |
| 9 | Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal male & female instantaneous type coupling (IS 903)..(MAKE: MINIMAX /MEC / FGE) |
| 10 | Providing & fixing 63 mm diaGun metal Braneh pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzlewith standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.. (MAKE: MINIMAX /MEC / FGE) |
| 11 | Providing &fixingfibre glass reinforced Fire Hose Cabinet ( 30\"x24\"x10\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\" Hose Cabinet\" on the Box complete as requried (MAKE: FGE/ MINIMAX/MEC) |
| 12 | ProvidingGunmetal Collecting head with 63 mm diainstantaneous type inlet +100 mm dia flanged outlet with builtincheckvalve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect.(MAKE: MINIMAX /MEC / FGE) |
| 13 | Two Way |
| 14 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table \"E\"specificationcomplete in all respect hydraulically test to 20 K./sqcm. ( MAKE:ZALOTO/ MINIMAX/ SANT) |
| 15 | 80 mm Dia. |
| 16 | 100 mm Dia. |
| 17 | 150 mm Dia. |
| 18 | Providing and fixing Cast CastIron/steel double flanged horizontal type with gunmetal seat non Dual plate reflux valve confirming to class - I, ISI including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \"E\" and specifications complete in all respect. (MAKE:MINIMAX /MEC / FGE) |
| 19 | 80 mm dia. |
| 20 | 100 mmdia. |
| 21 | 150 mm Dia. |
| 22 | supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried. ( MAKE: H Guru/ Fiebig ) |
| 23 | SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect.( MAKE: H Guru/ Fiebig ) |
| 24 | supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requriedMAKE:-(.MINIMAX,ZALOTO,SANT) |
| 25 | Supplying installation,testing and commissioning of electric driven mainfire pump DB 80/20 suitable for aotumatic operation and consisting of following complete in all respect as required.( MAKE: KIRLOSKAR/ CROMPTON ) |
| 26 | Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 50 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.) |
| 27 | Suitable 50 HP SQ cage induction motor ,TEFC,synchronous speed 2900 RPM suitable for operation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \"F\"insulation ,conforming to IS-325. |
| 28 | M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required. |
| 29 | (D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads. |
| 30 | Supply Insllation,testing,and commissioning Jockey pump with 10 HP SQ cage induction motor,TEFC,synchronous speed 2900 RPM,suitable for opreation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \"F\"insulation,conforming to IS-325 for 180 LPM and 50 Metres head conforming to IS 1520 bronze impeller/SSansMechanical seal.MS fabricated common base plate,coupling,coupling guard,CCfoundation etcas requried.( MAKE: KIRLOSKAR/ CROMPTON ) |
| 31 | Supplying installation,testing and commissioning of Diesel Engine driven mainfire pump suitable for aotumatic operation and consisting of following complete in all respect as required.( MAKE: KIRLOSKAR/ CROMPTON/ ) |
| 32 | Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% of the rated head.) |
| 33 | Suitable2500 RPM deesel engine conforming to IS:649/IS:160/IS10002 all amended upto date, countnuous duty, multi cylinders vertical 4 dtroke cycle water cooled, developing suitable 56 BHP at operating speed specified to drive the fire pumpcapable of driving continous non-stop opreation for 8 hours having 10% overload capacity for one hour in a period of 12 hours continuous run ,capacity to accept full load within 15 seconds from the receipt of signal to start and complete with following accessories. |
| 34 | Dynamically balanced fly-wheel. |
| 35 | Direct coupling for pump and coupling guards. |
| 36 | Radiator with hoses .fan water pump,drivearrangement and guards |
| 37 | Air-cleaner dry type |
| 38 | Fuel tank with necessary pipe. |
| 39 | Pump for fabricating oil and lubricating oil filter. |
| 40 | Electric starding system alongwith battery 12 V/24 V |
| 41 | Exhaust siliencer (residentail type) with necessary pipe work. |
| 42 | Governor |
| 43 | Instrument panel housing all the gauges including tachometer,hourmeter and starting switch with key (for manual starting) |
| 44 | Necessary safty control and stop solenoid in the event of fault. |
| 45 | Painted in post office red colour. |
| 46 | Common base plate fabricated out of MS channel of suitable size for assembling the pump and the engine fkexble coupling and with couplingguard for protection/safty. |
| 47 | Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply (The panel should be approved /Tested from the CPRI lab.& should confirmed to ISI: 64139.) |
| 48 | Incomer |
| 49 | I ) 200 A, 4 pole, 50 KA, MCCB withmicriprossor release with Ics=Icu digital Volt meter(0-500 Volts) with selector switch digital Ammeter (0-400 Amps) with in built selector switch and CT\"s etc. Set of 3 phase LED indicating lamps, set of Al. bus bar for 500 Amps |
| 50 | OUTING |
| 51 | Mains Fire pump. |
| 52 | I ) 160 Amps, 4p MCCB, 35/36 KA Ics=100% Icu with suitable HP fully automatic star/delta starter with over load protection, current sebsing type single phase preventor complete with all accessories and internalwiring requried for automatic operation, selector switgh for/ remoute, auto /mannul oFF operation-1sets |
| 53 | ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set |
| 54 | iii)Pump on LED Induication Lamp -1 No |
| 55 | b) Jockey pump. |
| 56 | i)63 Amps. 4P MCCB 25 KAIcs=100% wit hSuitableHP fully automatic star/delta starter with over load protection .(without no volt and under voltage trip), current sebsing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote,auto/manual OFF operation-2 set |
| 57 | ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set |
| 58 | iii) Pump on LED Induication Lamp -1 No |
| 59 | Diesel Engine Control |
| 60 | Control for Diesel Engine Comprising |
| 61 | Auto/ Manaul selector switch and 3 attempt starting device, timers and relays as requried . Push buttions.start/ stop in manual mode. Indication Lamp for High/Low Lub. Oil pressure, High Water Temp, and Engine ON indication. Battery Charger suitable for 12/24 V DC with boost and tickle selector switch, 0-30 V DC volt meter, 0-20 A DC Ammeter . All standard relay and accessories for automatic operation. |
| 62 | d) System Controller |
| 63 | Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, complete as per specification |
| 64 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size(MAKE:-KEI,POLYCB,FINOLEX)) |
| 65 | Armoured cable 35 sq. mm ( 3.5 core) |
| 66 | Armoured cable 70 sq. mm ( 3.5 core) |
