Public Works Department-PWD has published Construction Of Science Laboratory And Furniture Supply Work.. Submission Date for this Tender is 21-03-2022. Building Work Tenders in sonebhadra Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation in foundation trenches in soil mixed with moorumincluding 1.50 Metre lift&30Meter lead. Excavation shouldbedoneinregular pits and slopealllabour, T & Prequiredforpropercompletion of work as per S I No.251. |
2 | Construction of granular sub-base Grade-I by providing and laying well graded ready mix material as per specification spreading in uniform layerswith motor grader on prepared surface and mixing by mix in place mathode at OMC and compacting with smooth wheel roller to achieve the desired density complete as per MORD specification No. 401. |
3 | Providing and laying of Interlocking concrete block Pavement having thickness 60MM as per drwaings and technical specification clause 1504. |
4 | RCR stone masonary work in 1:4 cement and coarse sand mortar including supply of all materials, labour, T&P etc. required for proper completion of work. |
5 | RCC work with cement approved coarse sand and 20mm guage stone ballast in the proportion of 1:1.5:3 in lintel of doors and windows excluding its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc. and including supply of all materials, labour,T7P etc required for proper completion of work as per S I No. 288. |
6 | Mild Steel or iron work in plain work such as reinforced concrete or reinforced bricworkwrought to required shape as necessary including bending and also supply og steel ,wastage and overlapping and hooks required for proper completion of work as per S I No. 504 |
7 | M.150 Brick work with 1:4 cement and fine sand mortar in Super Structure including supply of all material, labour and T&P etc. required for proper completion of work as per S I No. 303+309+310 |
8 | Fabrication &supply of angle T-iron doors 40x40x5MM chaukhat frame including cost of all materials, labour,T&P etc required for proper completion of work as per Chapter 10 SL No.8. (NS-1) |
9 | Fabrication of Z section steel including cost of all materials, labour,T&P etc required for proper completion of work as per Chapter 10 SL No.8. (NS-1) |
10 | Fixing of steel chaukhat in position PWD Schdule Item No. NS-4 |
11 | Door |
12 | Window |
13 | Ventilator |
14 | P/F of Box type Fan hook 10cm dia including fixing with 12mm plain bar in position as per NBO 11.22 |
15 | 20MM cement plaster in two coats backing coats 17MM and finishing coat 3MM thick of neat cement on rough side of single or half brick wall for interior plastering upto floor two level not exceeding 80cm in girth and finished even and smooth as per Chapter 13 SL No. 16 (NS-1) |
16 | 12MM thick plastering in 1:6 Fine sand mortar on plain face including all material, labour, T&P etc completeas per S I No. 586 |
17 | 12MM thick plastering in 1:4 Fine sand mortar on Ceiling including all material, labour, T&P etc completeas per S I No. 584 |
18 | 25 mm thick Kota stone slab flooring over 20mm (average) thick base laid over and joints with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar as per CPWD 11.26.1 |
19 | S/O Flush door 30MM thick ISI marka |
20 | S/O Pin headed glass pains cut size 4mm thick MR |
21 | Oxidise iron fittings |
22 | 25mm thick 1:2:4 plain C C floor with cement ,approved coarse sand and 20mM guage dalla grit laid in panel finished with 3mm flooring coat of neat cement including 8mm thick base concreteincluding supply of all materials, labour,t&P etc. complete as per S I No 601 a |
23 | Providing and fixing of Glass strip 3.00mm thickness in joints of floor and skirtings at the time of laying floors flush with levels of 25 mm depth as per S I No. 631(a) |
24 | 6mm china white glazed in flooring or skirting dado laid with 1:3 cement and sand mortar finished with white cement slurry jointing and polishing complete as per S I No 628 |
25 | One priming coat of cement primer and one coat oil distemper on new work including supply of all material, labour,t&P etc. required for proper completion of work as per S I 649 +650 |
26 | Finished wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all material, labour,t&P etc. required for proper completion of work as per S I 660 +661 |
27 | Painting or varnishing new iron work in small areas or new wood with one coat of ready mixed priming paint including supply of all material, labour,t&P etc. required for proper completion of work as per S I 641 +642 |
28 | Supply and fixing of 110mm dia rain water pipe with shoe and bend including all complete work. |
29 | Internal water supply and sanitory |
30 | Internal elecrification |
31 | Supply of equipements of physics & biology lab with furniture etc complete as per direction of Eng.-in-charge. |
32 | S/F of Sign board. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail