Department Of Irrigation-DOI has published Renovation Of Land Acquisition Office Of Kanupur Irrigation Project At Rimuli. Submission Date for this Tender is 25-03-2022. Irrigation Work Tenders in Kendujhar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling and removing 2.5 cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50 mtr. Lead as per the direction of Engineer-in-charge. |
| 2 | Dismantlingand removing doors, windows and ventilators and removal of frame, hinges, and fastening and stacking the samefor reuse and removing the debris within 50 mtr. Lead as per the direction of Engineer-in-charge. |
| 3 | Dismantling and removing 2.5 cm grading concrete from roof slab cleaning the surface loweringand removing the debris within 50 mtr. Lead as per the direction of Engineer-in-charge. |
| 4 | Removing old lime or cement plaster 12 mm deep including racking out jointsand removing the debris within 50 mtr. Lead as per the direction of Engineer-in-charge. |
| 5 | Earthwork excavation of foundation in hard soil or gravelly soil within 50m initial lead and 1.5m lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depthand as per the direction of Engineer-in-charge. |
| 6 | Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete. |
| 7 | Cement concrete (1:3:6) with 40mm and down graded crusher broken hard granite metal with cost, carriage,royalty and taxes of all materials and labour etc. complete as per the direction of Engineer-in-Charge |
| 8 | Providing 1st class Brickwork with Fly Ash bricksin cement mortar (1:6) in Foundation and Plinth including cost carriage, royalty etc. |
| 9 | 25mm thick A.S. flooring with cement concrete (1:2:4) including punning using 12 mm size H.B.G.Chips of approved quality from approved quarry including watering,curingincl. cost, conveyance, royalty and labour required for the work etc.complete as directed by the Engineer in charge. |
| 10 | 4cm thick grading concrete (1:2:4) on roof slab using 12mm size hard broken granite chips for old work including all cost conveyance and royalty etc. complete. |
| 11 | 12mm thick cement plaster (1:6) for brick work with cost carriage, royalty etc. |
| 12 | Supplying,fitting and fixing of M.S. Iron door window pannel including cost,carriage all taxes and conveyance etc. complete. |
| 13 | Wall priming one coat with any approved primer including cost of primer |
| 14 | Priming one coat with any approved primer on iron work including sand papering, polishing the surface with cost, conveyance, royality and taxes of all materials and cost of primer etc . |
| 15 | Painting two coats on old wood & steel work including sand papering,polishing the surface with cost, conveyance, royalities and taxes of all materials and cost of labour with T & P required for the work etc. complete and as directed by the Engineer-in-charge. |
| 16 | Wall paintings two coats with plastic emulsion paint of approved shade on old work to give on even shade including cost of all materials and cost of all labour etc. |
| 17 | weather coat two Coat with material costper 1 Sqm. |
| 18 | Finishing wall surface of walls with Cement based wall putty (water based) of approved make and finished smooth and even suface to receive painting and including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 19 | Fixing Floor tiles (Chequired Tiles) in floor on 12mm thick cement plaster (1:4) joined with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete in-cluding cost of precast tiles . |
| 20 | Providing and fixing of Sliding windows of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with total coated thickness of 0.55 mm.Slide guide section should be made of 0.5 mm stainless steel of 430 grade. with paint specification being with primer of 5-7 microns thick and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the Sections for external frame bottom and top should be of 79 x 45 mm. external frame sides should be of 69 x 24 mm, guide for top and bottom should be of 69 x 26 mm (Stainless Steel). Section for shutter should be of 26 x 30 mm, Sash bar should be of 23 x 57mm.Accessories / gaskets are to be used as per themanufacturer’s supply and specification like gasket will be made of EPDM. All corner brackets for internal and external are to be made of glass filled nylon. The sections are to be cut to length , joined and assembled by means of corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm black with all taxes complete. |
| 21 | Supplying fitting,fixing of Ventilating fan-exhaust incuding cost of screw including cost of all materials etc.complete as per direction of the Engineer-in-charge. Rate (2198.21/1.18) |
| 22 | Supplying fitting and fixing of decorative flush door shutter with laminates on both the sides fitted with Godrej lock, door closer, door stopper etc. complete in all respect as per direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
