watershed development and soil conservation department has published Establishment Of Open Gym Under Departmental Head In Gram Panchayat Mendi Panchayat Samiti Kotda Pmksy-2.0 Catchment Area. Establishment Of Open Gym Under Departmental Head In Gram Panchayat Mendi Panchayat Samiti Kotda Pmksy-2.0 Catchment Area. providing. Submission Date for this Tender is 19-03-2022. Gym Equipment Tenders in Udaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux 1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB "C" Class G.I. Pipe. The footrests shall be made frem Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz (3:23 pm, 25/02/2022] Prasoon: nuts and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in-charge to fullfil. (The cement concrete and excavation work shall be paid separately). |
| 2 | THAI-CHISPINNER (2 WITEEL)-Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 10 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately). |
| 3 | SEATED PULLER- Providing and fixing of Seated Puller of size not less than 1900mm excavation work shall be paid separately). (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardiopulmonary function. The main structure frame shall be made from G.1. pipe minimum of SONB "C" class welded with MS. round base plate atleast 250 mm & 10mm thick. The handle frame shall be minimum of 32NB "C" class GL. pipe. The seat frame minimum of 32NB "C" class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material, High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. shall be paid separately). |
| 4 | LEG PRESS- Providing and fixing of Leg Press of size not less than 1840mm (Length) x as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately). 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoblel Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-incharge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately). |
| 5 | SIT UP BOARD DOUBLE -Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from "C" class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately. |
| 6 | CHEST PRESS-Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 250 mm & 10mm thick. The handle frame shall be made up from atleast 32NB "C" class G.I. pipe. The seats and Back rests to be fitted on the outer frames POMMEL HORSEshall be made up of M.S. Sheet of size not less than 330mm X 300 mmX2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoblc/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately). |
| 7 | STANDING SEATING TWISTER- Providing and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB, and 25 NB shall be made from "C" class G.I. pipe. The handle frame of Seating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from "C" class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoblel Berger/ Nerolac Paint with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (Thecement concrete and excavation work shall be paid separate |
| 8 | PUSH UP BARS-Providing and fixing of Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from "C" Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately) |
| 9 | ???, ???,?????? ??? 1.5 ????? ?? ?????? ?? ????? ???? , ?? ?? ????? , ???? ?????, ??? ?? ??????? , ???? ?????? ?? ???? ???????, ??? ???? ?? ??? ???? ???????? ?? ???: ?????? ?? ???? ??? ??? ??? ????? ?? 50 ???? ?? ???? ?? ????????? ???? (GKN_udr-2020/It.no2b) |
| 10 | ?????? ??????? 1:2:4/1:1.5:3 ?????? ?? ??????? ?????? ??????? ??? ????? ??? ??????? ????, ?? ?? ??????, ??????, ???, ????? ??? ??? ?????, ???? ???? ??? ??? ?? 1:3 ?????? ????? ?? ???? ???? ??? ???? ???????? ???? ??????? ?????? ??? ?????? ?? ???? ??? ??? (GKN_udr-2020/It.no13b) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
