Fertilisers And Chemicals Travancore Limited has published Supply And Installation Of Electrics And Instrumentation For Sulphuric Acid Storage Tanks At Fact-Cd Supply And Installation Of Electrics And Instrumentation For Sulphuric Acid Storage Tanks At Fact-Cd, As Per Tender Conditions.. Submission Date for this Tender is 05-04-2022. Chemical Supply Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Mar-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-04-2022 |
| Sl. No. | Item Description |
| 1 | Supply & Installation of Electrics and Instrumentation for Sulphuric Acid storage tanks at FACT-CD |
| 2 | INST.WORK,TPS 32646-14-PS-001 SIW,1.1 Supply of Diaphragm sealed pressure gauge with flush ring (Ref 32646-14-DA-00003 and 32646-14-HD-003) |
| 3 | INST.WORK,TPS 32646-14-PS-001 SIW,1.2 Supply of 1/2"NPT Standard pressure gauge with 2 Way manifold (Ref 32646-14-DA-00003 and 32646-14-HD-002) |
| 4 | INST.WORK,TPS 32646-14-PS-001 SIW,1.3 Supply of Non contact radar level transmitter (Ref 32646-14-DA-00001 and 32646-14-HD-001) |
| 5 | INST.WORK,TPS 32646-14-PS-001 SIW,1.4 Supply of Capacitance level transmitter, Range 0-1250mm (Ref 32646-14-DA-00004 and 32646-14-HD-004) |
| 6 | INST.WORK,TPS 32646-14-PS-001 SIW,1.5 Supply of Capacitance level transmitter, Range 0-2250mm with all accessories for mounting on a open tank (Ref data sheet 32646-14-DA-00004 and 32646-14-HD-005) |
| 7 | INST.WORK,TPS SIW,1.6 32646-14-PS-001 Supply of pH analyser withfloat and chain assembly (Ref 32646-14-DA-00002 and 32646-14-HD-006) |
| 8 | INST.WORK,TPS SIW,2.1 32646-14-PS-001 Supply of 12 Pair weatherproof(IP65) Junction box with SS316 cable glands (1/2"NPT- 5Nos, 1 1/2"NPT- 1 No) and Plugs (1/2"NPT- 7Nos, 1 1/2"NPT- 1 No) (Ref data sheet 32646-14-DA-005and 32646-14-DA-00006) |
| 9 | INST.WORK,TPS SIW,2.2 32646-14-PS-001 Supply of 12 Pair x 1mm2armoured individual and overall screened cable (Ref data sheet 32646-14-DA-00007) |
| 10 | INST.WORK,TPS 32646-14-PS-001 SIW,2.2 Supply of 1 Pair x 1.5mm2 armoured and screened cable (Ref data sheet 32646-14-DA-00007) |
| 11 | INST.WORK,TPS 32646-14-PS-001 SIW,2.4 Supply of 50mm width FRP Cable tray, Perforated type, minimumThickness 3mm, coupler plates, fastening ties etc, (Ref data sheet 32646-14-DA-00008) |
| 12 | INST.WORK,TPS 32646-14-PS-001 SIW,2.5 Supply of 100mm width FRP Cable tray, Perforated type, minimum Thickness 3mm, coupler plates, fastening ties etc, (Ref data sheet 32646-14-DA-00008) |
| 13 | INST.WORK,TPS 32646-14-PS-001 SIW,2.6 Supply of structural steel includes cable tray support, MS stanchion for Junction boxes and instruments mounting, support for canopies etc. |
| 14 | INST.WORK,TPS 32646-14-PS-001 SIW,2.7 Supply of aluminium sheets of thickness 2mm for making canopies for Instruments and Junction boxes. |
| 15 | INST.WORK,TPS 32646-14-PS-001 SIW,2.8 Supply of 1 1/2" (Typical) ET type cable gland suitable to 12Pair Overall and individual screened and armoured cable at Marshalling panel inside the control room. |
| 16 | INST.WORK,TPS 32646-14-PS-001 SIW,3.1 Erection of Diaphragm sealed pressure gauge with flush ring (Ref 32646-14-DA-00003 and 32646-14-HD-003 ) |
| 17 | INST.WORK,TPS 32646-14-PS-001 SIW,3.2 Erection of 1/2"NPT Standard pressure gauge with 2 Way manifold (Ref 32646-14-DA-00003 and 32646-14-HD-002 ) |
| 18 | INST.WORK,TPS 32646-14-PS-001 SIW,3.3 Erection of Non contact radar level transmitter (Ref 32646-14-DA-00001 and32646-14-HD-001) |
| 19 | INST.WORK,TPS 32646-14-PS-001 SIW,3.4 Erection of Capacitance level transmitter, Range 0-1250mm (Ref 32646-14-DA-00004 and 32646-14-HD-004) |
| 20 | INST.WORK,TPS 32646-14-PS-001 SIW,3.5 Erection of Capacitance level transmitter, Range 0-2250mm with all accessories for mounting on a open tank (Ref data sheet 32646-14-DA-00004 and 32646-14-HD-005) |
| 21 | INST.WORK,TPS 32646-14-PS-001 SIW,3.6 Erection of pH analyser with float and chain assembly (Ref 32646-14-DA-00002 and 32646-14-HD-006) |
| 22 | INST.WORK,TPS 32646-14-PS-001 SIW,4.1 Erection of 12 Pair weatherproof (IP65) Junction box with SS316 cable glands (1/2"NPT- 5Nos, 1 1/2"NPT- 1 No) and Plugs (1/2"NPT- 7Nos, 1 1/2"NPT- 1 No) (Ref data sheet 32646-14-DA-005 and 32646-14-DA-00006). Erection includes cable glanding and termination inside the Junction box. |
| 23 | INST.WORK,TPS 32646-14-PS-001 SIW,4.2 Erection of 12 Pair x 1mm2 armoured individual and overall screened cable (Ref data sheet 32646-14-DA-00007) |
| 24 | INST.WORK,TPS SIW,4.3 32646-14-PS-001 Erection of 1 Pair x 1.5mm2 armoured and screened cable (Ref data sheet 32646-14-DA-00007) |
| 25 | INST.WORK,TPS 32646-14-PS-001 SIW,4.4 Erection of 50mm width FRP Cable tray, Perforated type, minimum Thickness 3mm, coupler plates, fastening ties etc, (Ref data sheet 32646-14-DA-00008) |
| 26 | INST.WORK,TPS 32646-14-PS-001 SIW,4.5 Erection of 100mm width FRP Cable tray, Perforated type, minimum Thickness 3mm, coupler plates, fastening ties etc, (Ref data sheet 32646-14-DA-00008) |
| 27 | INST.WORK,TPS 32646-14-PS-001 SIW,4.6 Erection of structural steel includes cable tray support, MS stanchion for Junction boxes and instruments mounting, support for canopies etc. |
| 28 | INST.WORK,TPS 32646-14-PS-001 SIW,4.7 Erection of aluminium sheets of thickness 2mm for making canopies for Instruments and Junction boxes. |
| 29 | INST.WORK,TPS 32646-14-PS-001 SIW,4.8 Erection of 1 1/2" (Typical) ETtype cable gland suitable to12Pair Overall and individual screened and armoured cable atMarshalling panel inside thecontrol room. |
| 30 | INST.WORK,TPS 32646-14-PS-001 SIW,5.1 Commissioning of the entire system as per TPS32646-14-PS-001 |
| 31 | INST.WORK,TPS 32646-14-PS-001 SIW,6.1 Supply of spare Diaphragm sealed pressure gauge with flush ring (Ref 32646-14-DA-00003 and 32646-14-HD-003) |
| 32 | INST.WORK,TPS 32646-14-PS-001 SIW,6.2 Supply of spare Non contact radar level transmitter (Ref 32646-14-DA-00001 and32646-14-HD-001) |
| 33 | INST.WORK,TPS 32646-14-PS-001 SIW,6.3 Supply of spare pH analyser (Sensor + Transmitter) (Ref 32646-14-DA-00002 and 32646-14-HD-006) |
| 34 | INST.WORK,TPS 32646-14-PS-001 SIW,7-2 Labour rates for Unskilled worker with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract |
| 35 | INST.WORK,TPS 32646-14-PS-001 SIW,7-1 Labour rates for Skilled worker with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract |
| 36 | INST.WORK,TPS 32646-14-PS-001 SIW,7-3 Labour rates for Supervisor on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract |
| 37 | ELEC.WORK,TPS 32646-13-TS-001 SIW,1 Supply of Extension panel to existing Siemens make 433V,2500A, 3phase and neutral, 35MVA, double front, draw out type Motor Control Center (MCC) complete with all accessories as per specifications and datasheet attached. (Refer Data sheet:32646-13-DA-906-01) The extension panel shall consists of 2Nos 18.5kW, 1No. 7.5kW, 1No. 3.7kW DOL motor starter feeders,1No. of 63A and 32A TPN SFU feeders. 630A fuse and fuse carrier shall be provided in bus bar chamber for isolating vertical bus bar sections from main horizontal bus. The panel shall be extended on the left hand side i.e., extension to panel No.1F. The horizontal, vertical and earthing busbar material and size shall match with the existing switch board. Bidder shall visit the site and collect the details of busbar before quoting. Make of components shall be same as that of existing MCC(SIEMENS). The scheme and component ratings of feeders shall be same as that ofexisting feeders. |
| 38 | ELEC.WORK,TPS 32646-13-TS-001 SIW,2 Erection, testing and commissioning of Extension panel to existing Siemens make 433V, 2500A, 3phase and neutral, 35MVA, double front, draw out type Motor Control Center (MCC) complete with all accessories as per specifications and datasheet attached. (Refer Data sheet:32646-13-DA-906-01) The extension panel shall consists of 2Nos 18.5kW, 1No. 7.5kW, 1No. 3.7kW DOL motor starter feeders, 1No. of 63A and 32A TPN SFU feeders. 630A fuse and fuse carrier shall be provided in bus bar chamber for isolating vertical bus bar sections from main horizontal bus. The panel shall be extended on the left hand side i.e., extension to panel No.1F. The horizontal, vertical and earthing busbar material and size shall match with the existing switch board. Bidder shall visit the site and collect the details of busbar before quoting. Make of components shall be same as that of existing MCC(SIEMENS). The scheme and component ratings of feeders shall be same as that of existing feeders |
| 39 | ELEC.WORK,TPS 32646-13-TS-001 SIW,3 Supply of 18.5kW DOL motor starter feeder drawout type, installation and wiring up of the same in the vacant modules/cubicles (Cubicle Nos: 9R1/9F2) available in the existing Motor Control Centre (MCC). The scope of work shall include supply of DIN rail, connectors and all accessories required for the completion of the work. Bidder shall visit the site and collect the details of busbar before quoting. Make of components shall be same as that of existing MCC (SIEMENS). |
| 40 | ELEC.WORK,TPS 32646-13-TS-001 SIW,4 Erection, testing and commissioning of 18.5kW DOL motor starter feeder drawout type, installation and wiring up of the same in the vacant modules/cubicles (Cubicle Nos: 9R1/9F2) available in the existing Motor Control Centre(MCC). The scope of work shall include supply of DIN rail, connectors and all accessories required for the completion of the work. Bidder shall visit the site and collect the details of busbar before quoting. Make of components shall be same as that of existing MCC (SIEMENS). |
| 41 | ELEC.WORK,TPS 32646-13-TS-001 SIW,5 Supply of 7.5kW DOL motor starter feeder drawout type, installation and wiring up of the same in the vacant modules/cubicles (Cubicle Nos: 11F1) available in the existing Motor Control Centre (MCC). The scope of work shall include supply of DIN rail, connectors and all accessories required for the completion of the work. Bidder shall visit the site and collect the details of busbars before quoting. Make of components shall be same as that of existing MCC (SIEMENS). |
| 42 | ELEC.WORK,TPS 32646-13-TS-001 SIW,6 Erection, testing andcommissioning of 7.5kW DOL motorstarter feeder drawout type, installation and wiring up of the same in the vacant modules/cubicles (Cubicle Nos: 11F1) available in the existing Motor Control Centre (MCC). The scope of work shall include supply of DIN rail, connectors and all accessories required for the completion of the work. Bidder shall visit the site and collect the details of busbars before quoting. Make of components shall be same as that of existing MCC (SIEMENS). |
| 43 | ELEC.WORK,TPS 32646-13-TS-001 SIW,7 Supply of Local Control Stations (Type-P1) for ON/OFF control of MV motors with, IP 55, weather proof, cast Aluminium enclosure and Ammeter as per specifications attached. Cable entry shall be suitable for 1 No.10 x 2.5 sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32646-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel. |
| 44 | ELEC.WORK,TPS 32646-13-TS-001 SIW,8 Erection, testing and commissioning of Local Control Stations (Type-P1) for ON/OFF control of MV motors with, IP 55, weather proof, cast Aluminium enclosure and Ammeter as per specifications attached. Cable entry shall be suitable for 1 No.10 x 2.5 sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32646-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel. |
| 45 | ELEC.WORK,TPS 32646-13-TS-001 SIW,9 Supply of Junction box Henselmake Mi model or equivalent made out of modular Polycarbonate thermoplastic enclosures having transparent lid. The enclosure shall be environment friendly, recyclable, UV resistant,halogen & silicon free, antiacid & anti corrosive. TheDegree of Ingress Protection IP 65 shall be in accordance with IEC 60529. The gasket materialshall be Polyurethane; while thegasket shall be internallyembedded. The boxes are with suitable gland plates to fix the cables and cable glands without losing the degree of protection of the assembly and with wall mounting frame.The junction boxes shall be used for enclosing following switchgears, 63A SFU, Two 4 pole ELCB of 100mA for welding set, 2 DP MCB for Temporary light, One 250VA, 230/24V transformer, 1 DP MCBfor transformer primary, 1 DP ELCB of 30mA for transformer secondary, 4 number of DP MCBfor 24V temporary connection.Supply voltage shall be labelled in MCB and in connectors. 3½ x 50 sq.mm XLPE insulated armoured aluminium cable shall be terminated as SFU incomer. The junction boxes shall have cable entries from bottom, internal terminals, links, etc. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall include supply of cable glands and cable lugs.For better safety, the Polycarbonate enclosure shall be fire retardant & self extinguishing in accordance with IEC 60 695-2-11 Junction boxes shall be provided with removable gland plate. |
| 46 | ELEC.WORK,TPS 32646-13-TS-001 SIW,10 "Erection, testing andcommissioning of Junction boxHensel make Mi model or equivalent made out of modular Polycarbonate thermoplastic enclosures having transparentlid. The enclosure shall beenvironment friendly,recyclable, UV resistant,halogen & silicon free, antiacid & anti corrosive. TheDegree of Ingress Protection IP65 shall be in accordance with IEC 60529. The gasket materialshall be Polyurethane; while thegasket shall be internally embedded. The boxes are with suitable gland plates to fix thecables and cable glands withoutlosing the degree of protectionof the assembly and with wallmounting frame.The junctionboxes shall be used forenclosing following switchgears,63A SFU, Two 4 pole ELCB of 100mA for welding set, 2 DP MCBfor Temporary light, One 250VA, 230/24V transformer, 1 DP MCBfor transformer primary, 1 DPELCB of 30mA for transformersecondary, 4 number of DP MCBfor 24V temporary connection.Supply voltage shall be labelledin MCB and in connectors. 3½ x50 sq.mm XLPE insulated armouredaluminium cable shall beterminated as SFU incomer. Thejunction boxes shall have cable entries from bottom, internal terminals, links, etc. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall include supply of cable glands and cable lugs. For better safety, the Polycarbonate enclosure shall be fire retardant & self extinguishing in accordance with IEC 60 695-2-11 Junction boxes shall be provided with removable gland plate. |
| 47 | ELEC.WORK,TPS 32646-13-TS-001SIW,11 Testing, Commissioning and Handing over 415 V motors up to and including 18.5kW non-hazardous (ordinary) weatherproof Motors, as per enclosed specifications/ data sheets/ drawings. The scope shall include mounting of field instruments like speed switches, temperature probes, temperature gauges, etc. if any supplied by the motor manufacturer, megger testing, setting direction of rotation, no load run test, load run test, submission of test reports, etc. The charges indicated below shall include Testing, Commissioning and Handing over of the motors along with associated, ammeter, ON/OFF controls and annunciations if any applicable on control panels/stations. The scope shall also include submission of site test certificates. However transportation & mechanical erection of motors and cable terminations are excluded from the scope of this item. This item is not applicable for single-phase motors in ceiling fans; exhaust fans provided by the bidder. For other requirements refer Annexure. |
| 48 | ELEC.WORK,TPS 32646-13-TS-001 SIW,12 Supply of Addressable manual call point (Loop powered, Lift and pull type) - Non Ex Proof. Supply, Installation, testing and commissioning of Intelligent addressable weatherproof fire alarm manual call stations, make-Morley, Type No.HM-MCP-GLASS, with intelligent addressable module. Item supplied and installed shall be complying/conforming to TAC and other statutory rules, regulations etc. and integrated to existing fire alarm system. |
| 49 | ELEC.WORK,TPS 32646-13-TS-001 SIW,13 Erection of Addressable manual call point (Loop powered, Lift and pull type) - Non Ex Proof. Supply, Installation, testing and commissioning of Intelligent addressable weatherproof fire alarm manual call stations, make-Morley, Type No.HM-MCP-GLASS, with intelligent addressable module. Item supplied and installedshall be complying/conforming to TAC and other statutory rules, regulations etc. and integrated to existing fire alarm system. |
| 50 | ELEC.WORK,TPS 32646-13-TS-001 SIW,14 Supply of Weatherproof, cast Aluminium, junction boxes of following sizes for Zone I,group IIB, T3 temperature class area and suitable pedestal mounting - 63A, non flameproof, IP55 with 1No 3Cx70 Sq.mm XLPE insulated armoured aluminium cable as incomer and 1No 3Cx25 Sq.mm XLPE insulated armoured aluminium cable as outgoing. The junction boxes shall be used wherever the MV power cable is of higher size than cable entry provided by the motor supplier. The junction boxes shall have cable entries from bottom and internal terminals, links, etc. to interconnect the incoming and outgoing cable as per specifications /data sheet attached. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall exclude supply of cable terminations, cable glands, gland adapters and cable lugs as the same is covered elsewhere. All external hardwares shall be stainless steel. Suitable canopyshall be provided. |
| 51 | ELEC.WORK,TPS 32646-13-TS-001 SIW,15 Erection, testing, commissioning and handing over of Weatherproof, cast Aluminium, junction boxes of followingsizes for Zone I, group IIB, T3 temperature class area and suitable pedestal mounting - 63A, non flameproof, IP55 with 1No 3Cx70 Sq.mm XLPE insulated armoured aluminium cable as incomer and 1No 3Cx25 Sq.mm XLPE insulated armoured aluminium cable as outgoing. The junction boxes shall be used wherever the MV power cable is of higher size than cable entry provided by the motor supplier. The junction boxes shall have cable entries from bottom and internal terminals, links, etc. to interconnect the incoming and outgoing cable as per specifications /data sheet attached. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall exclude supply of cable terminations, cable glands, gland adapters and cable lugs as the same is covered elsewhere. All external hardwares shall be stainless steel. Suitable canopy shall be provided. |
| 52 | ELEC.WORK,TPS 32646-13-TS-001 SIW,16 Supply of Weatherproof, cast Aluminium, junction boxes of following sizes for Zone I,group IIB, T3 temperature class area and suitable pedestal mounting - 63A, non flameproof,IP55 suitable for terminating 5Nos 12Cx1.5 Sq.mm XLPE insulatedarmoured copper Cable as incomerand 2 Nos 44Cx1.5Sq.mm XLPEinsulated armoured copper cable as outgoing. The junction boxesshall be used wherever the MV power cable is of higher sizethan cable entry provided by the motor supplier. The junction boxes shall have cable entries from bottom and internal terminals, links, etc. to interconnect the incoming andoutgoing cable as per specifications /data sheet attached. Suitable cable glandsand cable adapters are to be used for terminating the cable. The scope of supply shallexclude supply of cableterminations, cable glands,gland adapters and cable lugs as the same is covered elsewhere.All external hardwares shall bestainless steel. Suitable canopyshall be provided. The junction box shall be provided with required number of connectors suitable for terminating 1.5 sq.mm copper control cable. 20% spare terminals shall be made available in the junction box. The junction box shall be suitable for wall mounting. |
| 53 | ELEC.WORK,TPS 32646-13-TS-001SIW,17 Erection, testing, commissioning and handing over of Weatherproof, cast Aluminium,junction boxes of following sizes for Zone I, group IIB, T3 temperature class area andsuitable pedestal mounting - 63A, non flameproof, IP55 suitable for terminating 5 Nos12Cx1.5 Sq.mm XLPE insulated armoured copper Cable as incomerand 2 Nos 44Cx1.5Sq.mm XLPE insulated armoured copper cable as outgoing. The junction boxesshall be used wherever the MV power cable is of higher size than cable entry provided by the motor supplier. The junction boxes shall have cable entries from bottom and internal terminals, links, etc. to interconnect the incoming and outgoing cable as per specifications /data sheet attached. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall exclude supply of cable terminations, cable glands, gland adapters and cable lugs as the same is covered elsewhere. All external hardwares shall bestainless steel. Suitable canopy shall be provided. The junction box shall be provided withrequired number of connectors suitable for terminating 1.5 sq.mm copper control cable. 20% spare terminals shall be made available in the junction box. The junction box shall be suitable for wall mounting |
| 54 | ELEC.WORK,TPS 32646-13-TS-001SIW,18 Supply of Control panel/desk of self contained freestanding, floor mounted, dust, damp and vermin proof, sheet steel cubicle in folded construction with requirements as specified in the data sheet (Refer doc.32646-13-DA-928-01) and suitable for indoor air-conditioned atmosphere. Minimum thickness of cold rolled cold annealed CRCA sheet steel shall be 2 mm.Wiring and termination to remote DCS shall be provided from the hardware console. (i.e., provision for terminating 2 Nos 44Cx1.5Sq.mm XLPE insulated armoured copper cable). Bidder shall visit the site and collect required data of existing DCS console-SAP before quoting. |
| 55 | ELEC.WORK,TPS 32646-13-TS-001 SIW,19 Erection of Control panel/desk of self contained freestanding, floor mounted, dust, damp andvermin proof, sheet steel cubicle in folded construction with requirements as specifiedin the data sheet (Refer doc. 32646-13-DA-928-01) and suitable for indoor air-conditioned atmosphere. Minimum thickness of cold rolled cold annealed CRCA sheet steel shall be 2 mm. Wiring and termination to remote DCS shall be provided from the hardware console. (i.e.,provision for terminating 2 Nos 44Cx1.5Sq.mm XLPE insulated armoured copper cable). Bidder shall visit the site and collect required data of existing DCS console-SAP before quoting. |
| 56 | ELEC.WORK,TPS 32646-13-TS-001SIW,20 Supply of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3.5C x 50 sq.mm. Refer sl no. 2 of Annexure for further requirement. |
| 57 | ELEC.WORK,TPS 32646-13-TS-001 SIW,21 Erection, Testing, Commissioningand Handing over of 650/1100V,Aluminium conductor XLPEinsulated, extruded PVCsheathed, armoured, PVC outer sheathed cable of size 3.5C x 50sq.mm. Refer sl no. 2 ofAnnexure for further requirement. |
| 58 | ELEC.WORK,TPS 32646-13-TS-001 SIW,22 Supply of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x70sq.mm. |
| 59 | ELEC.WORK,TPS 32646-13-TS-001 SIW,23 Erection, Testing, Commissioningand Handing over of 650/1100V,Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x70sq.mm |
| 60 | ELEC.WORK,TPS 32646-13-TS-001, SIW,24 Supply of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x25sq.mm |
| 61 | ELEC.WORK,TPS 32646-13-TS-001 SIW,25 Erection, Testing, Commissioning and Handing over of 650/1100V,Aluminium conductor XLPE insulated, extruded PVCsheathed, armoured, PVC outersheathed cable of size 3C x25sq.mm |
| 62 | ELEC.WORK,TPS 32646-13-TS-001 SIW,26 Supply of 650/1100V, Aluminiumconductor XLPE insulated, extruded PVC sheathed, armoured,VC outer sheathed cable of size 3C x10sq.mm |
| 63 | ELEC.WORK,TPS 32646-13-TS-001 SIW,27 Erection, Testing, Commissioning and Handing over of 650/1100V,Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x10sq.mm |
| 64 | ELEC.WORK,TPS 32646-13-TS-001 SIW,28 Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 4sq.mm |
| 65 | ELEC.WORK,TPS 32646-13-TS-001 SIW,29 Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 4sq.mm |
| 66 | ELEC.WORK,TPS 32646-13-TS-001 SIW,30 Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 4C x 10 sq.mm |
| 67 | ELEC.WORK,TPS 32646-13-TS-001 SIW,31 Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 4C x 10 sq.mm |
| 68 | ELEC.WORK,TPS 32646-13-TS-001 SIW,32 Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured,PVC outer sheathed cable of size 3C x 2.5 sq.mm |
| 69 | ELEC.WORK,TPS 32646-13-TS-001 SIW,33 Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 2.5 sq.mm |
| 70 | ELEC.WORK,TPS 32646-13-TS-001SIW,34 Supply of 650/1100V, copperconductor XLPE insulated,extruded PVC sheathed, armoured,PVC outer sheathed cable of size12c x 1.5 sq.mm |
| 71 | ELEC.WORK,TPS 32646-13-TS-001SIW,35 Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated,extruded PVC sheathed, armoured, PVC outer sheathed cable of size 12c x 1.5 sq.mm |
| 72 | ELEC.WORK,TPS 32646-13-TS-001 SIW,36 Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10c x 2.5 sq.mm |
| 73 | ELEC.WORK,TPS 32646-13-TS-001 SIW,37 Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10c x 2.5 sq.mm |
| 74 | ELEC.WORK,TPS 32646-13-TS-001 SIW,38 Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 44c x 1.5 sq.mm |
| 75 | ELEC.WORK,TPS 32646-13-TS-001 SIW,39 Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 44c x 1.5 sq.mm |
| 76 | ELEC.WORK,TPS 32646-13-TS-001 SIW,40 Supply of 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable. |
| 77 | ELEC.WORK,TPS 32646-13-TS-001 SIW,41 Erection, Testing, Commissioning and Handing over of 600V, 1pair,1.5 sq mm armoured and screenedFRLS signal cable. |
| 78 | ELEC.WORK,TPS 32646-13-TS-001 SIW,42 Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured,PVC outer sheathed 3.5C x 50 sq.mm. cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 79 | ELEC.WORK,TPS 32646-13-TS-001 SIW,43 Cable termination on panels, onmotors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 70sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment,wherever required, fixing lugs,electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 80 | ELEC.WORK,TPS 32646-13-TS-001 SIW,44 Cable termination on panels, onmotors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 25sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthingcable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 81 | ELEC.WORK,TPS 32646-13-TS-001 SIW,45 Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3.5C x 50 sq.mm. cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.3C x 10sq.mm |
| 82 | ELEC.WORK,TPS 32646-13-TS-001 SIW,46 Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 4C x 10sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 83 | ELEC.WORK,TPS 32646-13-TS-001 SIW,47 Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 2.5sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practicesetc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rateshall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 84 | ELEC.WORK,TPS 32646-13-TS-001 SIW,48 Cable termination on panels, onmotors/Junction boxes, localcontrol stations etc., testing, commissioning and handing overof 650/1100V, copper conductorXLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 4C x 10sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all requiredaccessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable .10C x 2.5 sq.mm |
| 85 | ELEC.WORK,TPS 32646-13-TS-001 SIW,49 Cable termination on panels, onmotors/Junction boxes, localcontrol stations etc., testing, commissioning and handing overof 650/1100V, copper conductorXLPE insulated, extruded PVCsheathed, armoured, PVC outer sheathed cable of size 12C x 1.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment,wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable |
| 86 | ELEC.WORK,TPS 32646-13-TS-001 SIW,50 Cable termination on panels, onmotors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 44C x1.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 87 | ELEC.WORK,TPS 32646-13-TS-001 SIW,51 Cable termination on panels, onmotors/Junction boxes, local control stations etc., testing,commissioning and handing over of 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable. |
| 88 | ELEC.WORK,TPS 32646-13-TS-001 SIW,52 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3½c x 50sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning,associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item |
| 89 | ELEC.WORK,TPS 32646-13-TS-001 SIW,53 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 70sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 90 | ELEC.WORK,TPS 32646-13-TS-001 SIW,54 Supply of double compressionNickel plated brass cable glandssuitable for 650/1100V,Aluminium conductor XLPEinsulated, extruded PVC sheathed, armoured, PVC outersheathed 3C x 25sq.mm cable. The gland shall be suitable forcable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 91 | ELEC.WORK,TPS 32646-13-TS-001 SIW,55 Supply of double compressionNickel plated brass cable glands suitable for 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 10sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 92 | ELEC.WORK,TPS 32646-13-TS-001 SIW,56 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated,extruded PVC sheathed, armoured, PVC outer sheathed cable of size 4C x 10sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 93 | ELEC.WORK,TPS 32646-13-TS-001 SIW,57 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 94 | ELEC.WORK,TPS 32646-13-TS-001 SIW,58 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 95 | ELEC.WORK,TPS 32646-13-TS-001 SIW,59 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.12C x 1.5 sq.mm |
| 96 | ELEC.WORK,TPS 32646-13-TS-001 SIW,60 Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 44C x1.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item. |
| 97 | ELEC.WORK,TPS 32646-13-TS-001 SIW,61 Supply of double compressionNickel plated brass cable glands suitable for 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall beapplicable. Separate erection charges are not applicable for this item. |
| 98 | ELEC.WORK,TPS 32646-13-TS-001 SIW,62 Supply of heat shrinkable type straight through joints on main run of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 70sq.mm. conforming to specifications, data sheets drawing, relevant standards etc. to the entire satisfaction of the owner. The scope shall include supply of required accessories and preparation of joints as per manufacturer"s recommendation for thesuccessful completion of job. |
| 99 | ELEC.WORK,TPS 32646-13-TS-001 SIW,63 Erection - Installation, testing and commissioning of heat shrinkable type straight through joints on main run of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 70sq.mm. conforming to specifications, data sheets drawing, relevant standards etc. to the entire satisfaction of the owner. The scope shall include supply of required accessories and preparation of joints as per manufacturer"s recommendation for thesuccessful completion of job. |
| 100 | ELEC.WORK,TPS 32646-13-TS-001 SIW,64 Supply of heat shrinkable type straight through joints on main run of 650/1100V, Copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 2.5 sq.mm. conforming to specifications, data sheets drawing, relevant standards etc. to the entire satisfaction of the owner. The scope shall include supply of required accessories and preparation of joints as per manufacturer"s recommendation for the successful completion of job. |
| 101 | ELEC.WORK,TPS 32646-13-TS-001 SIW,65 Erection - Installation, testing and commissioning of heat shrinkable type straight through joints on main run of 650/1100V, Copper conductor XLPE insulated, extruded PVCsheathed, armoured, PVC outer sheathed cable of size 10C x 2.5 sq.mm. conforming to specifications, data sheetsdrawing, relevant standards etc. to the entire satisfaction of the owner. The scope shall include supply of required accessories and preparation of joints as per manufacturer"s recommendation for the successful completion of job. |
| 102 | ELEC.WORK,TPS 32646-13-TS-001 SIW,66 Supply of PVC covered Aluminium conductors of size 120 sq.mm,(Lightning protection of tank, for earth pit interconnection around tanks, connection to nearby existing earth pit etc.) |
| 103 | ELEC.WORK,TPS 32646-13-TS-001 SIW,67 Erection of PVC coveredAluminium conductors of size 120sq.mm,(Lightning protection of tank, for earth pitinterconnection around tanks,connection to nearby existingearth pit etc.) |
| 104 | ELEC.WORK,TPS 32646-13-TS-001 SIW,68 Supply of PVC covered Aluminiumconductors of size 25 sq.mm (DB for welding sockets) |
| 105 | ELEC.WORK,TPS 32646-13-TS-001 SIW,69 Erection of PVC covered Aluminium conductors of size 25 sq.mm (DB for welding sockets) |
| 106 | ELEC.WORK,TPS 32646-13-TS-001 SIW,70 Supply of PVC covered Aluminium conductors of size 16 sq.mm (For motors LCS ,LDB etc.) |
| 107 | ELEC.WORK,TPS 32646-13-TS-001 SIW,71 Erection of PVC covered Aluminium conductors of size 16 sq.mm (For motors LCS ,LDB etc.) |
| 108 | ELEC.WORK,TPS 32646-13-TS-001 SIW,72 Supply of pipe electrode earth pits as per Drg No.32646-13-GE-00 251. The scopeshallinclude excavation with shuttering if required, dewatering theexcavated pit if required, refilling with charcoal & sand, construction of inspection chamber with cover slab, etc. The supply scope shall include supply of electrodes, GI pipes, earth conductors and funnel and all other accessories required. The scope shall also include supply of allaccessories such as sand, reinforcement steel, brick, rubble, PVC pipes, clamps, bolts, nuts, washers, bitumen compound, etc. For general requirements refer Annexure. |
| 109 | ELEC.WORK,TPS 32646-13-TS-001 SIW,73 Erection, Testing, Commissioning and Handingoverof pipe electrode earth pits as per Drg No.32646-13-GE-00 251. The scopeshallinclude excavation with shuttering if required, dewatering the excavated pit if required, refilling with charcoal & sand, construction of inspection chamber with cover slab, etc. The supply scope shall include supply of electrodes, GI pipes, earth conductors and funnel and all other accessories required. The scope shall also include supply of allaccessories such as sand, reinforcement steel, brick, rubble, PVC pipes, clamps, bolts, nuts, washers, bitumen compound, etc. For general requirements refer Annexure. |
| 110 | ELEC.WORK,TPS 32646-13-TS-001 SIW,74 Supply of CI plate electrode earth pits as per Drg. No. 32646-13-GE- 00 252. The scopeshall includeexcavation with shuttering if required, dewatering the excavated pit if required, refilling with charcoal & sand, construction of inspection chamber with cover slab, etc. The supply scope shall include supply of electrodes, GI pipes, earth conductors and funnel and all other accessories required.The scope shall also include supply of allaccessories such as sand, reinforcement steel, brick, rubble, PVC pipes, clamps, bolts, nuts, washers, bitumen compound, etc. For general requirements refer Annexure. |
| 111 | ELEC.WORK,TPS 32646-13-TS-001 SIW,75 Erection, Testing, Commissioningand Handing overof CI plate electrode earth pits as per Drg. No. 32646-13-GE- 00 252. The scope shall includeexcavation with shuttering if required, dewatering the excavated pit if required, refilling with charcoal & sand, construction of inspection chamber with cover slab, etc. The supply scope shall include supply of electrodes, GI pipes, earth conductors and funnel and all other accessories required.The scope shall also include supply of allaccessories such as sand, reinforcement steel, brick, rubble, PVC pipes, clamps, bolts, nuts, washers, bitumen compound, etc. For general requirements refer Annexure. |
| 112 | ELEC.WORK,TPS 32646-13-TS-001 SIW,76 Supply of 100 mm wide, 6mm thick Aluminium junction plate of various lengths suitable for connecting required number of earth conductors. The scope includes cutting to required sizes and fixing the junction plate on walls/racks/supports, etc. as well as punching of boltholes. For general requirements refer Annexure. Also refer Drg. No. 32646-13-GE-00 254. |
| 113 | ELEC.WORK,TPS 32646-13-TS-001 SIW,77 Erection of 100 mm wide, 6mm thick Aluminium junction plate of various lengths suitable for connecting required number of earth conductors. The scope includes cutting to required sizes and fixing the junction plate on walls/racks/supports, etc. as well as punching of boltholes. For general requirements refer Annexure. Also refer Drg. No. 32646-13-GE-00 254. |
| 114 | ELEC.WORK,TPS 32646-13-TS-001 SIW,78 Supply of Weatherproof, 45W LED type well glass lighting fixtures with double compression cable glands and all accessories . All external hardwares shall be stainless steel. (FCG Type No: LW 51125 or equivalent. Refer sl no. 4 of Annexure. |
| 115 | ELEC.WORK,TPS 32646-13-TS-001 SIW,79 Erection of Weatherproof, 45W LED type well glass lighting fixtures with double compression cable glands and all accessories. All external hardwares shall be stainless steel. (FCG Type No: LW 51125 or equivalent.Refer sl no. 4 of Annexure. |
| 116 | ELEC.WORK,TPS 32646-13-TS-001 SIW,80 Supply of 110W LED Floodlight made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection suitable for fixing in terrace area with all related acessories for fixing the luminaire (PHILIPS BVP192 LED110 CW HO NB FG GR PSU or equivalent type of Crompton Greaves/ Philips /GE Lighting Ltd / WIPRO/ Havells/OSRAM). Refer sl no. 4 of Annexure. |
| 117 | ELEC.WORK,TPS 32646-13-TS-001 SIW,81 Erection of 110W LED Floodlight made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection suitable for fixing in terrace area with all related acessories for fixing the luminaire (PHILIPS BVP192 LED110 CW HO NB FG GR PSU or equivalent type of Crompton Greaves/ Philips /GE Lighting Ltd / WIPRO/ Havells/OSRAM). Refer sl no. 4 of Annexure. |
| 118 | ELEC.WORK,TPS 32646-13-TS-001 SIW,82 Supply of 415V, 32A Ph & N,Sheet steel Lighting Distribution Board with one number 32A, 4 pole MCB and ELCB (30mA) as incomer side and 12 Nos 10A Single Pole MCBs as out going feeders. The DB shall have separate buses for phase, neutral and earth. The DB shall be double door type. (All MCBs shall be of C curve and 10 kA short circuit capacity. An Astronomical time switch (Legrand 4128 23 or equivalent) for daily control of the street lights also shall be provided. The distribution board shall be installed inside a weather proof thermoplastic enclosure of suitable size and provided with canopy. (DBs shall conform to IS 13032) The earth bus shall be suitable for taking individual earth leads for each circuit. The gaskets used if any, shall be of neoprene only. Spare slots provided for MCB mounting if any shall be properly blanked. (components of DB shall be LEGRAND/HAVELLS/ INDO ASIAN/ C&S/ L&T/ABB/ STANDARD make).Refer sl no. 4 (e) of Annexure for further requirement. |
| 119 | ELEC.WORK,TPS 32646-13-TS-001 SIW,83 Erection of 415V, 32A Ph & N, Sheet steel Lighting Distribution Board with one number 32A, 4 pole MCB and ELCB (30mA) as incomer side and 12 Nos 10A Single Pole MCBs as out going feeders. The DB shall have separate buses for phase, neutral and earth. The DB shall be double door type. (All MCBs shall be of C curve and 10 kA short circuit capacity. An Astronomical time switch (Legrand 4128 23 or equivalent)for daily control of the street lights also shall be provided.The distribution board shall be installed inside a weather proof thermoplastic enclosure of suitable size and provided with canopy. (DBs shall conform to IS 13032) The earth bus shall be suitable for taking individual earthleads for each circuit. The gaskets used if any,shall be of neoprene only. Spare slots provided for MCB mounting ifany shall be properly blanked. (components of DB shall be LEGRAND/HAVELLS/ INDO ASIAN/ C&S/ L&T/ABB/ STANDARD make). Refer sl no. 4 (e) of Annexure for further requirement. |
| 120 | ELEC.WORK,TPS SIW,84 32646-13-TS-001 SIW,84 Supply of Hot dip galvanizedoctagonal Street light poles of height 7m as per Drg No. 32646-13-GE-00 261. The scope shall include marshalling box, grouting of base plate/miscellaneous civil works, extension cables from marshalling box to the fixture at the top, etc. The foundation pedestal shall be provided by the purchaser. Earthing of the street light pole shall be done by 1.5mtr long 12mm dia GI Rod. Earth electrode shall be connected using 25x6mm GI Strip. For casting foundation, foundation bolt with template for base plate shall be provided by the contractor well in advance The lighting fixtures are excluded from the scope of this item |
| 121 | ELEC.WORK,TPS 32646-13-TS-001 SIW,85 Erection, Testing, Commissioningand Handing over ofHot dip galvanized octagonal Street light poles of height 7m as per Drg No. 32646-13-GE-00 261. The scope shall include marshalling box, grouting of base plate/miscellaneous civil works, extension cables from marshalling box to the fixture at the top, etc. The foundation pedestal shall be provided by the purchaser. Earthing of the street light pole shall be done by 1.5mtr long 12mm dia GI Rod. Earth electrode shall be connected using 25x6mm GI Strip. For casting foundation, foundation bolt with template for base plate shall be provided by the contractor well in advance The lighting fixtures are excluded from the scope of this item. |
| 122 | ELEC.WORK,TPS 32646-13-TS-001 SIW,86 Supply and fabrication of structural steel items as per drawings enclosed for racks, risers and tray supports, pedestals, DB supports, supports for other equipment, etc. as required. The painting shall be with two coats of epoxy paint over 2 coats of suitable epoxy primer. The scope of work shall be as noted below. The supply scope shall include supply of MS steel sections of various sizes as required. For other requirements see General (a) above. The erection scope shall include transportation, handling at site, storage, inspection, safe custody, welding, cutting, making bolt holes, and painting with two coats of epoxy paint over 2 coats of suitable epoxy primer after cleaning with wire brush including supply of paint, etc. Chipping, cement grouting, re-plastering of walls, floors, ceilings, columns etc. of concrete or brick work for supporting the structural items, supply of structural items, bolts, nuts, washers, cement, sand, etc. are also included in the scope of the work. The bolts, nut,washersshall be of hot dipped GI. The rate indicated below shall be applicable also for structural if any issued by PURCHASER. The concrete footing for supports shall be extra under separate item as indicated elsewhere. Payment shall be made on the basis of measurement of dimensions of structural steel items actually installed multiplied by the unit weight applicable for various sections. The quantities indicated being of preliminary nature, contractor shall assess the actual site requirement and supply accordingly. |
| 123 | ELEC.WORK,TPS 32646-13-TS-001 SIW,87 Erection, fixing, epoxy painting and handing over of structural steel items as perdrawings enclosed for racks, risers and tray supports, pedestals, DB supports, supports for other equipment, etc. as required. The painting shall be with two coats of epoxy paint over 2 coats of suitable epoxy primer. The scope of work shall be as noted below. The supply scope shall include supply of MS steel sections of various sizes as required. For other requirements see General (a) above. The erection scope shall includetransportation, handling at site, storage, inspection, safe custody, welding, cutting, making bolt holes, and painting with two coats of epoxy paint over 2 coats of suitable epoxy primer after cleaning with wire brush including supply of paint, etc. Chipping, cement grouting, re-plastering of walls, floors, ceilings, columns etc. of concrete or brick work for supporting the structural items, supply of structural items, bolts, nuts, washers, cement, sand, etc. are also included in the scope of the work. The bolts, nut,washersshall be of hot dipped GI. The rate indicated below shall be applicable also for structural if any issued by PURCHASER. The concrete footing for supports shall be extra under separate item as indicated elsewhere. Payment shall be made on the basis of measurement of dimensions of structural steel items actually installed multiplied by the unit weight applicable for various sections. The quantities indicated being of preliminary nature, contractor shall assess the actual site requirement and supply accordingly. |
| 124 | ELEC.WORK,TPS 32646-13-TS-001 SIW,88 Supply of 600mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 75mm side runner, 3000 mm long, complete with bends, SS tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below; (a) The scope shall include supply of bends, tees, jointing plates, bolts, nuts, washers, etc as required. However for measurement, no separate charges shall be applicable for required bends, Tees, jointing plate etc. Refer Annexure for general requirement. (b) The erectionscope shall include transportation, handling at site, storage, inspection, safe custody, fixing to structural supports, jointing wherever required, etc. The GRP trays are to be laid over fabricated MS cable racks. The scopeshall alsoinclude, supply of bolts, nuts, clamps, washers, etc. The bolts, nut, washersshall be of SS. " |
| 125 | ELEC.WORK,TPS 32646-13-TS-001 SIW,89 "Erection of 600mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 75mm side runner, 3000 mm long, complete with bends, SS tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below; (a) The scope shall include supply of bends, tees, jointing plates, bolts, nuts, washers, etc as required. However for measurement, no separate charges shall be applicable for required bends, Tees, jointing plate etc. Refer Annexure for general requirement. (b) The erectionscope shall include transportation, handling at site, storage, inspection, safe custody, fixing to structural supports, jointing wherever required, etc. The GRP trays are to be laid over fabricated MS cable racks. The scopeshall alsoinclude, supply of bolts, nuts, clamps, washers, etc. The bolts, nut, washersshall be of SS |
| 126 | ELEC.WORK,TPS 32646-13-TS-001 SIW,90 Supply - Canopy for motors for weatherproof protection. The canopy shall be made of 2 mm Aluminium sheets bent suitably and fixed to a steel frame fabricated using MS structural members (refer drg. no. 32646-13-GE-00 255). The MS items shall be epoxy painted with two coats of paint over suitable primer. The cost shall include supply of all accessories including aluminum sheets, MS structural, GI bolts, nuts and washers and fabrication and painting as required. For general requirements srefer Annexure. Canopies shall be fabricated and installed only for that equipment as directed by site-in charge. |
| 127 | ELEC.WORK,TPS 32646-13-TS-001 SIW,91 Erection - Canopy for motors forweatherproof protection. Thecanopy shall be made of 2 mm Aluminium sheets bent suitablyand fixed to a steel framefabricated using MS structural members (refer drg. no. 32646-13-GE-00 255). The MS items shall be epoxy painted with two coats of paint over suitable primer. The cost shall include supply of allaccessories including aluminumsheets, MS structural, GI bolts,nuts and washers and fabricationand painting as required. For general requirements srefer Annexure. Canopies shall be fabricated and installed only for that equipment as directed by site-in charge. |
| 128 | ELEC.WORK,TPS 32646-13-TS-001 SIW,92 Excavation and back filling of cable trenches for burying cables, as per the Typical Drg. no.32646-13-GE-00 253. The excavation rates shall be applicable for burying pipes, earth conductors etc. |
| 129 | ELEC.WORK,TPS 32646-13-TS-001 SIW,93 Supply and spreading of approved fine river sand/stone dust / M sand as per IS383 in cable trenches, including all labour and materials, as per specifications of this tender and directions of engineer-in-charge. |
| 130 | ELEC.WORK,TPS 32646-13-TS-001 SIW,94 Supply of well burnt bricks of 50 mm thickness for cable protection inside trenches. |
| 131 | ELEC.WORK,TPS 32646-13-TS-001 SIW,95 Erection- Installation of well burnt bricks of 50 mm thickness for cable protection inside trenches. |
| 132 | ELEC.WORK,TPS 32646-13-TS-001 SIW,96 Chipping of concreted area/ concrete slab, etc for laying cables or pipes and rebuilding the chipped area to original condition. The scope shall include supply of all materials necessary for rebuilding. The charges furnished here shall cover all items applicable including supply of materials. For other requirements refer Annexure. |
| 133 | ELEC.WORK,TPS 32646-13-TS-001 SIW,97 Making wall openings in brick wall of depth 300mm or below for the purpose of laying cables, and replastering. The charges furnished shall cover supply of all required materials except cement For other requirements refer Annexure. |
| 134 | ELEC.WORK,TPS 32646-13-TS-001 SIW,98 Supply and installation of1:2:4 PCC for cabletraysupports, PB Station pedestals, etc. The scopeshall include supply ofall materials like sand, stone, etc. The charges furnished shall cover supply of all materials required. For other requirements refer Annexure. |
| 135 | ELEC.WORK,TPS 32646-13-TS-001 SIW,99 Supply of 100mm NB (GI-class B).The scope shall also include fabrication, bending, welding, etcwherever applicable. The erection rate indicatedbelow shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure. |
| 136 | ELEC.WORK,TPS 32646-13-TS-001 SIW,100 Erection - installation, laying and fixing of 100mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etcwherever applicable. The erection rate indicatedbelow shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure. |
| 137 | ELEC.WORK,TPS 32646-13-TS-001 SIW,101 Supply of 50mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etcwherever applicable. The erection rate indicatedbelow shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure. |
| 138 | ELEC.WORK,TPS 32646-13-TS-001 SIW,102 Erection - installation, laying and fixing of 50mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etcwherever applicable. The erection rate indicatedbelow shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure. |
| 139 | ELEC.WORK,TPS 32646-13-TS-001 SIW,103 Supply of 19 mm. NB (GI-Class B). The scope shall also include fabrication, bending, welding, etcwherever applicable. The erection rate indicatedbelow shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements see of 1.0.0 above.(for installing well glass light fittings/ as platform lighting pole) |
| 140 | ELEC.WORK,TPS 32646-13-TS-001 SIW,104 Erection - installation, laying and fixing of 19 mm. NB (GI-Class B). The scope shall also include fabrication, bending, welding, etcwherever applicable. The erection rate indicatedbelow shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements see of 1.0.0 above.(for installing well glass light fittings/ as platform lighting pole) |
| 141 | ELEC.WORK,TPS 32646-13-TS-001 SIW,105 Removal of cover slab of existing built up cable trench for cable laying,reinstallation and sealing of RCC cover slab over cable trench (with suitable sealing compound) after laying of cables. |
| 142 | ELEC.WORK,TPS 32646-13-TS-001 SIW,106 Supply and Erection of 1.1 kV grade insulation mat as per IS 15652:2006 of thickness not lessthan 2.5 mm and 1000 mm wide. |
| 143 | ELEC.WORK,TPS 32646-13-TS-001 SIW,107 Labour rates for Helper with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc. |
| 144 | ELEC.WORK,TPS 32646-13-TS-001 SIW,108 Labour rates for Electrician with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supplyof consumables such as insulation tapes ferrule etc. |
| 145 | ELEC.WORK,TPS 32646-13-TS-001 SIW,109 Labour rates for Electrical supervisor with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc. |
| 146 | ELEC.WORK,TPS 32646-13-TS-001 SIW,110 Labour rates for Electrical supervisor at site on over time basis (after normal shift time of 8 hour) |
| 147 | ELEC.WORK,TPS 32646-13-TS-001 SIW,111 Labour rates for Electrician at site on over time basis (after normal shift time of 8 hour) |
| 148 | ELEC.WORK,TPS 32646-13-TS-001 SIW,112 Labour rates for Helper at siteon over time basis (after normal shift time of 8 hour) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
