|
| 1 | ???, ???,?????? ??? 1.5 ????? ?? ?????? ?? ????? ???? , ?? ?? ????? , ???? ?????, ??? ?? ??????? , ???? ?????? ?? ???? ???????, ??? ???? ?? ??? ???? ???????? ?? ???: ?????? ?? ???? ??? ??? ??? ????? ?? 50 ???? ?? ???? ?? ????????? ???? ?????, ?????,???? ?????? ( ITEM NO. 2(B) GKN 2021 BLOCK PIRAWA) |
| 2 | ???????? ???????? ???? ?? ???? ??? 40 ??.??. ????? ??? ?? ??????? ??????(crusher broken)/?? ????? , ????????- ??? ????? ??? 1 ???????? : 4 ??? : 8 ?????? ?????? ??? ????? ??? ????? ???? , ???? ???? ? ( ITEM NO. 10(A) GKN 2021 BLOCK PIRAWA) ?????? ?? ?????? (crusher broken) ?? ??? 40 ???? ?????? ?????? ????? ?? ????? ?? ????? ?? ??? ?? ???? ??? ???? ?? ????? ???? ?? ??? ?????? ??? ???? ?????? ????? ?? ?? ??? 30 ??????? ?? ????? ?? ??????? |
| 3 | ???? ??? ?????? ??? ?????? ?? ?? ?????-???? ??????-???? ????? ???, ?? ??? ?? ???? ????? ???? ??? ???? ??? ????? ?????? ???? 1:6 ( ITEM NO. 29(B) GKN 2021 BLOCK PIRAWA) |
| 4 | ???? ??? ?????? ??? ?????? ?? ?? ?????-???? ??????-???? ????? ???, ?? ??? ?? ???? ????? ???? ??? ???? ??? ????? ?????? ???? 1:4( ITEM NO. 29(A) GKN 2021 BLOCK PIRAWA) |
| 5 | ????????? ?????? ?????? ????, ??????? ?????, ???? ??. 21 ?? 24 ?? ???, ?????? ??? 4.5 ???? ????? ?? 30 ???? ?? ???? ????? ?? ???? ITEMNO- 30 |
| 6 | ???? ??? ?????? ????? ?????? ??? ?? ????? ???????? -???? 1:6????? ???, ?? ??? ?? ???? ????? ???? ??? ???? ????? ( ITEM NO. 20(A) GKN 2021 BLOCK PIRAWA) |
| 7 | ????????? ???? ??????? ??? ????? ????? ??? 4.5 ???? ????? ?? ?????? ????? ??? ITEM NO- 22 |
| 8 | ??????????\"?????? (????? ??? ????????) ?? ??.??.??. ??, ??????, ??????, ??????? ??? ????? ?? ??? ????? 4.5 ???? ???? ?? ?? ??? ??? ????? ??? ????? ????? ?? ??????? ?????? ????? ( ITEM NO. 93(B) GKN 2021 BLOCK PIRAWA) |
| 9 | lhesaV dkØhaV 1:1.5:3 feJ.k dh izofyr lhesaV dkØhaV esa Mkyuk rFkk vkiwfÙkZ djuk] Nr dh Lysc] NTts] che] fyVay vkfn esa] nckuk] rjkbZ djuk rFkk lrg dks 1%3 lhesaV elkys ls lery djuk vkfn lesar ijUrq LVªhy rFkk \"kVfjax dh dher vyx lsA( ITEM NO. 13(B) GKN 2021 BLOCK PIRAWA) |
| 10 | ???????? ????????? ????? ?? 1:4 ?????? ??? ???????? - ???? ?????? ????? ?? ??????? ??? 14 ??? ?? ?????? ???? ???? 20 ??.??. ????? ( ITEM NO. 76(B) GKN 2021 BLOCK PIRAWA) |
| 11 | ?????? ?????? ?? ??? ???? 3 ?? ??? ???? ????? ??? ?? ???? ( ??? ????? ?? ?? ????? ?????? ( ITEM NO. 82(A) GKN 2021 BLOCK PIRAWA) |
| 12 | ??.??.??. ??? ?? ??? ???? ?? ?????, ?????? ??? ?????? ?? ????? ??? ?????? ?? ????? ?? ??????? ?? ? ( ITEM NO. 61 GKN 2021 BLOCK PIRAWA) |
| 13 | ????(???????? ???????) (1/12 ?????? ?????) ITEMNO- 137 |
| 14 | ???? ?? ???? ???? ????? ???? 15 ???? ???? ???????? ?? ??????? ??? ????? ????? ?? ????? ?????? ITEMNO- 65 |
| 15 | ?????/??? ??? ??? ???? ?? ????? ?????? ???? ??????, ?? ??? ??????? (????), ?? ?????, ?????? ??? ????? ???? ITEM 63 |
| 16 | 0.80 ???? ????? (22 ???) ?? ???? ?? ??????? ??????? ????? ???????? ??????? ?? ?? ?? ?? ??? ??? 8 ???? ?????? ?? ?????? ??? ??, ?????? ???? ?? ??? ??????? ???? ? ?????(????? ?????)? ????? ???? ??? ????? ?? ???? ????? ???? ??? ???????? ??? ???? 18.3 ??.x9.1 ??. = 184 ???. ?? ????,54 ?? ??? ???? 2.5 X 0.9 ??.???(121.5 ???.) ?? ??? 54 ?? ??? ???? 2.8X0.9 ??. ??? (136.08 ???.) = 257.58 ???? ????ITEM NO-54 |
| 17 | THAI-CHISPINNER (2 WHEEL) Providing and Fixing of Thai-Chi spinner (2 Wheel) of size not less than 700mm (Length)x1000mm (width) x1280mm. (Height), to increase mobility of shoulder -elbow and hip-nee. the maintain structure frame shall be made from G.I pipe minimum of 80 NB \"C\" class welded with M.S. round base plate atleast Ø 250 mm & 10 mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done withpure polyester powders from Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfil the functional requirement. The indicative Design- Photo is as per enclosed Photo no.3. ( The cement concrete and excavation work shall be paid separately). |
| 18 | SEATED PULLER Providing and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB \"C\" class welded with MS. round base plate atleast Ø250 mm & 10mm thick. The handle frame shall be minimum of 32NB \"C\" class GL. pipe. The seat frame minimum of 32NB \"C\" class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately). |
| 19 | LEG PRESS Providing and Fixing of Leg Prss of size not less than 1840mm (Length)x360mm (width) x1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round vase plate atleast Ø250mm&10mm thick. The Sleeve frame minimum of 100 OD and of M.S. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame . The footrestsshall be made from casted Aluminum material, having sizes minimum of 130mm X310mm X5mm thick. Closing Caps shall be made up of high quality fiver reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly . The powdercoating shall besone with pure polyester powder of Ackzonoble/ Berger/ Nerolac with 60to 70 micron thickness, complete in all respect including fixing the M.S. hodfast in cement concrete to hold the whole structure, under the directions ofEngineer-in-charge to fullfill the functional reqirements. The indicative Design- Photo is as per enclosed Photo no. 5 . ( The cement concrete and excavation work shall be paid separately). |
| 20 | SIT UP BOARD DOUBLE Providingand fixing of Sit up Board double of size not les than 1760mm (Length) X 1140mm (Width ) X 660 mm (Height ),to enhance the flexibilty of wholebody.The main structure frame shall be made from G.I. pipe minumum of 80 NB \"C class welded with M.S. round base plate atleast Ø250 mm & 10mm thick . The remaining frame of the sit up board minimum of 32 mm NB shall be made \"c\" class GI pipe. The powdercoating shall be done with 60 to 70 micronthickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the wholestructure, under the directions of engineer-in- charge to fullfill the functional requirements. The indicative Design/ Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately.) |
| 21 | CHESTPRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) X 710mm (width) x 2200mm. (height),to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonaryfunction. The main Sructure frame shall be made from G.I. pipe minimum of 80NB\"C\" class welded with M.S. round base plate atleast Ø250mm & 10mm thick. The handle frame shall be made up from atleast 32NB :C\" class G.I. Pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S.sheet of size not less than 330mm X300mm X 2mmthicknesss. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tendile steel withgalvanized nuts& bolts shall be used for assembly . The powder coating shall be done with pure polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete to hold the whole structure, under the directions of Enfineer-in- chargeto full fill the functional requirements. The indicative Design/ Photo os as per enclosed Photo no. 7 ( The cement concrete and excavation work shall be paid seperately ). |
| 22 | STANDING SEATING TWISTER Providing and fixing of Seating & Standing Twister of size not les than 1700mm (Length) X 540mm (Width) X 1250mm .(Height) , to enhance flexibility of waist. Suitable for people of different ages except children. The main structure frame shall be made from G.I. pipeminimum of 80 NB \"C\" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The bottom frame of the Seating &Standing twister be atleast of 32 NB, 50NB,and 25NBshall be made from \"C\"class G.I. pipe.The handle frame of seating & standing twisterof minumum 25NB &Foot restingframe of seating side shall be made from \"C\" class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up M.S. Round plate of minumum size 300mm diameter and 10mm tickness. Closing Caps shall be made up ofhigh quality Fiber reinforced Plastic Material. High tensile steel with galvanized nuts & bolts shall be used for assembly . The powder coating shall be done by pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the direction of Engineer- in- charge to fullfill the functonal requirements . The indicative Design/Photo is as per enclosed Photo no. 10 . (Thecement concrete and excavation work shall be paid separate.) |
| 23 | CHEST CUM SHOULDER PRESS Providing and fixing of Chest Press Cum Seated Puller of size not less than 2000 mm (Leght) X 710mm (Width) X 2200 mm (Height), to enhance the strengthof upper limbs and the muscles chest and shoulder . The main structure frame shall be made from G.I. pipe minimum of 80 NB \"C\" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. sheet of size 330mm X300mm X 2mm thickness.Closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done withpure/ polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness ,complete in all respectincluding fixing the M.S. holdfast in cement concrete to fullfill the functional requirement. The indicative Design / Photo is as per enclosed Photo no. 11. ( The cement concrete and excavation work shall be paid separately). |
| 24 | PUSH UP BARS Providing and fixing of push Up Bars of size not less than 1220mm (length) X 550mm(Width) 1700mm . (Height), To enhance the strengthand stamina of the body. The Main structure frame shall be made from G.I. pipe minimum of 80 NB\"C\" class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from \"C\" class G.I. pipe. closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with pure polyester powders of Ackzonoble / Berger / Nerolac Paints with 60 to 70 micron thickness, complete to hokd the whole structure . under the direction of Engineer-in-charge to fullfil the wholefunctional requirements. The indicative Design/ Photo is as per enclosed Photo no.12 . ( The cement concerete and excavation work shall be paid separately.) |
| 25 | ???? ?? ????, ?????? ???????? ??? ???????? ?? ????? ?????( ITEM NO. 191 GKN 2021 BLOCK PIRAWA) |
| 26 | ???/????ITEM NO.5.1 Material Rate Comparison Report Among Blocks of ??????? as on 01/04/2021 |
| 27 | ????,??? ?? ????,????,????,????? ?? ?????? 40mm ?????? ???? ?? ?? ?? ?? ??????? ???? ?? ??? ?????? ??????? ?? ??????,?????? ? ???????? ???? ? (?????? ?? ?????? ?????? ??? ?? ???? ?? ?????? ? ?? ??? ????? ??) 5 KM 186 |
| 28 | SEATER MRG Providing and fixing of For Seater MRG swing of size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of 50 NBshall be made from \"C\" Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from \"C\" class G.I. pipe. The handle frame of 25NB shall be made from \"C\" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB\"C\" class welded with M.S. round plate of Ø250. mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately) |
| 29 | CIRCULAR SWING FOUR SEATER Providing and fixing of CIRCULAR SWING FOUR SEATER of size 6.0 X 5.25 X 5.0 Feet fabricated with a Center Pipe/ Frame of 63 NB shall be made from \"C\" Class G1 Pipe and FRP material. The bottom shall be welded with support of MS round plate of Ø250 mm & 10mm thickness, the bottomframe of 32NB shall be made from \"C\" class G.I. pipe. The The bottom handle frame of 25NB shall be made from \"C\" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from pipe of G.I. of 65 NB \"C\" class welded with MS round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm MS angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3 mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and padal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid seperately) |
| 30 | FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAW of size 5.5 X 6.25 X 2.5 Feet fabricated with a Center Pipe/ Frame of 50 NBshall be made from \"C\" Class G.1. material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from \"C\" class G.I. pipe. The handle frame of 25NB shall be made from \"C\" class G.1. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB\"C\" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder conting shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (The cement concrete and excavation work shall be paid separately |
| 31 | HORSE /DUCK/RABET SPRING RIDER Providing and fixing of HORSE SPRING RIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of 40 NB shall be made from \"C Class G.1. material and FRP Material The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from \"C\" class G.1. pipe. The handle frame of 25NB shall be made from \"C\" class G1. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40 NB \"C\" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately) |
