|
| 1 | Name of Work: SUNAPOSI MIP,in ChampuaBlock of Keonjhar District. |
| 2 | Excavation of foundation to proper profile in all kinds of soil with all leads and lifts including dressing and leveling the bed to proper slope and level and making it fit for laying concrete and depositing the excavated materials clear of work site within all leads and lifts etc including dewatering from foundation if necessary etc with supply of all labour, all taxes as per prevailing norm and T&P required for the work etc complete in all respects as directed by the Engineer-in-charge. |
| 3 | Filling foundation & plinth with excavated materials including watering & ramming to all heights with all leads & lifts with supply of all labour, all taxes as per norm and T&P required for the work etc complete in all respects as directed by the Engineer-in-charge. |
| 4 | Excavation of the approved type of soil in approved borrow area by mechanical means, loading into and transportation by mechanical means and unloading the soilon properly prepared and scientifically approved surface ( benching & cutting the old embankment and removing all unwanted materials away from the surface) including spreading & levelling the earth in layers of 22.5cm thick to make ready for watering and compaction with dozers/ by standard vibrator / short drum width vibratory power rollerbut excluding watering & compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road and borrow area including hire & running charges of all materials, royalty, labour all taxes as per prevailing norm etc. complete as per direction of Engineer-in-Charge. (Measurement of the fill to be taken on the finished compacted section under O M C condition). |
| 5 | Earth work in excavation for base stripping with all leads and lifts to proper slope and profile as per the requirement including the rough dressing and disposing off the soil at designated place marked for the purpose (Filling of low lying areas only to avoid all types of environment hazards) alongwith supply of all labour and tools & plants, all materials, labourincluding all taxes as per prevailing norm & supervision charges to complete the item of workand as per the direction of the Engineer-in-charge. (comparison of Measurement will be made both at excavated area & dump area for tallyng the quantity). |
| 6 | Watering earth work upto the O M C condition and compaction by sheepfoot rollers /by standard vibrator / short drum width vibratory power roller to earth layers not exceeding 22.5cm to 95% of MDD (maximum dry density) including hire and running charges of the all machineries,labour,all taxes as per prevailing norm,T&P and water complete as per direction of Engineer-in-charge. (Measurement to be taken on the finished compacted section of the fill under O M C condition). |
| 7 | Providing Cement Concrete M15 grade with nominal reinforcement (excluding cost of M.S. rod, carriage and labour for cutting, bending, binding and fixing of M.S. rod) using 20mm and down, graded, crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves wherever necessary including cost, conveyance, royalty and other taxes of all materials,with all cost of tools and plant, cost and carriage of wateretc, with supply of all labour,taxes as per prvailing normand supervision Charges including mobilisation & de-mobilisation of men & machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 8 | Providing Reinforced Cement Concrete M20 grade for RCC works on approved surface or shape and size using 20mm and down graded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin, quarry debris and foreign materials, clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, ( excluding cost, carriage of M.S. rodand labour for cutting, bending, binding and fixing of M.S. rod)with all cost of tools and plant, cost and carriage of wateretc, with supply of all labour and supervision Charges including mobilisation & demobilisation of machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge. |
| 9 | Providing rigid, smooth centering & shuttering for concrete works including false work and including cost, conveyance, royalty & other taxes of all materials required for the work complete in all respect and dismantling the same after casting and curing with water for specified period including depositing the debris clear of work site with all leads & lifts, delfts including supply of all labour, all tases as per prevailing norm and T & P required for the items etc. complete in all respect as directed by Engineer-in-charge.(for foundation & plinth)(for lining form work included in concrete item) |
| 10 | Supplying, fitting & placing HYSD barsreinforcement and tying the grills as per approved design & drawing and placing in position including cost, conveyance, royalty and other taxes binding wires of 18 to 20 gauge with supply of all labour,taxes as per prvailing norm and T&P required for the work etc, complete in all respect as directed by the Engineer-in-Charge. (Weight of the binding wire will not be included in the measurement for payment) |
| 11 | Fine dressing of earth work in slope of Dam & canalembankment including trimmed to required profile and turfing with best compacted dub grass sods with all leads and lifts including periodical watering with labour, all other taxes as per prevailing norm and T & P till survival of the turf etc. complete in all respect as directed by the Engineer-in-Charge. (Measurement and Payment will be made on survival of the turf. ) |
| 12 | Supplying and laying RCC spun pipesincluding cost, conveyance, royalties andall taxes of RCC spun and including supply of all labour,taxes as per prvailing norm and T&P etc. to complete the work or as directed by the Engineer-in- charge. 150mm diameter |
| 13 | Rough Stone Dry packing in approns and revetments to all height, profile and level using hard granite broken stone of 30 cm. and above size and above of approved quality, quarried, free from weathered skin including filling the interstices with small stone wedges including cost, conveyance, royality and other taxes of all materials, labour, all taxes as per prevailing norm and T&P alongwith supply of all labour required for the work complete in all respects as directed by the Engineer-in-Charge. |
| 14 | ProvidingRectangular reinforced Cement Concrete channels of sizes 30 cm x 30 cm or 40 cmx 40 cm for command area development (CAD-WM) in Cement Concrete M15 grade using 20mm down graded crusher broken hard granite stone aggregate of approved quality quarried, free from weathered skin surface and any deleterious materials using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering laying the concrete in position to proper slope and level as per the standard size and specification & model section with keys, bends, turnouts, providing contraction joints and filling with approved sealing materials including use of AEA (air entraining agent) in the concrete mix and supply of all materials, labour and machineries, compacting with plate/needle vibrator and finishing the concrete surface including excavation of channels on the approved alignment and fixing & re-fixing of alignments for the channel for laying the CAD-WM channel alongwith trimming, dressing, watering and compacting to the spoil banks to proper sectioning, providing beads and grooves etc, cutting trenches for the channels, keys as indicated in theapproved drawing, curing the concrete for the required time with supply of all materials including cost, conveyance, royality, all labour and T&P complete as directed by Engineering - in-Charge. |
