Water Resources Department-WRD has published Construction Of G + 1 Building ( Dinning Hall And Auditorium ) By Demolishing Old Class Room Building, Renovation Of All Class Room, Kitchen, Store Room, Library, Art & Craft Room And Computer Lab, Construction Of One Unit Toilet, Septic Tank, D. Submission Date for this Tender is 12-03-2022. Building Work Tenders in dhanbad Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismanting old damaged building by hydrplic excavator and raking out joints to 15 mm depth waterring and disposal of unservicable materials with all leads all complate as per buildingspecification and direction of E/I. 1 nos. + roomed building 2 x 8 Hour R.C.D. S.O.R. Item No. (P & M 0117 ) |
| 2 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below. D.S.R. Item No. 15.13.1 |
| 3 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. B.C.D. S.O.R. Item No. 5.10.3 |
| 4 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. B.C.D. S.O.R. Item No. 5.10.1 |
| 5 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I. B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2 |
| 6 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.10 |
| 7 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.6.3 |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.2 |
| 9 | Providing and laying reinforced cement concrete (1:1.5:3) of specified grade excluding the cost of centering and shuttering (Stone aggregate 20 mm nominal size)- do - do - E/I.(5.3.9.1) |
| 10 | Providing R.C.C. Work in wall (any thickness including attached plasters, buttresses plinth and stream coarse column pillers R.C.C. (1:1.5:3) (stone aggregate 20 mm nominal size) - do - do - E/I.(5.3.10) |
| 11 | Providing designation 75- B, Brick work in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick motor joint, cost of screening materials rakingout joints 15 mm depth, curring, taxes and royalty all complete as per building specification and direction of E/I (5.2.6) |
| 12 | Providing 50 mm thick damp proof course with cement concretenominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position, striking, curring taxes and royalty all complete as per building specification and direction of E/I (5.3.5) |
| 13 | Providing designation 75- B, Brick work in C.M (1:6) in Super structure and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick motor joint, cost of screening materials rakingout joints 15 mm depth, curring, taxes and royalty all complete as per building specification and direction of E/I (5.2.14) |
| 14 | Reinforced cement concrete work in beam"s suspended floor"s roof"s having slop to 15"" landing, balconies, shelves chajja, lintels & bands - do - do - all complete as per building specification and direction of E/I. (R.C.C. (1:1.5:3) (stone aggregate 20 mm nominal size) (5.3.11) |
| 15 | Providing 19 mm thick water proof cement plaster (1:3) withclean coarse sand of F.M. 1.5 with 5% cisco or any other approved water proofing compund including screening curring, with all leads and lifts of water, scaffoldingtaxes and royalty all complete Job as per buildingSpecification and direction of E/I. (5.7.15) |
| 16 | Supplying, fiting and fixing fan hook of 16 mm dia MS bar 1 m long bent to require size and sape, placed in position and fluid in the R.C.C. Slab Beem at the time of casting all complete as per building specification and direction of E/I.(5.5.13) |
| 17 | Providing 6 mm thick Cement plaster in (1:4) in Ceilingwith clean course sand of F.M.1.5 including the cost of screening, curring with all leads & lifts of water, scaffolding taxesand royalty all complete as per building specification and direction of E/I(5.7.6) |
| 18 | Providing 12 mm thick Cement plaster in (1:6) onWallwith approved quality of clean course sand of F.M.1.5 including the cost of screening curring with all leads & lifts of water, scaffolding taxesand royalty all complete as per building specification and direction of E/I(5.7.3) |
| 19 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead 50 M and lift of 1.5 M all complete as building specification and direction of E/I (mode of measurement compacted volume) (5.1.7) |
| 20 | Supplying, fitting and fixing M.S. Grill made of 20 x 6 mm flat as per approved design and drawing properly febricated with joints continous fitted, welded and finished smooth, hoistingas per building specification and direction of E/I.(5.5.12) |
| 21 | Supplying fitting and fixing 20 guage G.C.I. Sheet Gate fitted on M.S. Angle frame of size 60 x 60 x 6mm including cost of febrication providing necessary locking arraingment with haskal duly fixed in P.C.C. (1:2:4) blocks of required size appliying a priming red lead paint over steel work, taxes all complete as per drawing spefification and direction of E/I. (5.5.29) |
| 22 | Supplying fitting and fixing in collapsible gate of approved size and make properly fabricated with vertical double channeles 20x10x2 mm at 100 mm centeres and draced with M.S Flate diagonals 20x3 mm with top and bottom rails of T.Iron 40x40x6 mm with 38 mm dia steel pulleys complite with bolts, nuts, locking arrangements, stopperes, handels inculiding applying a priming cot of red lead paint, carrage, hoisting and taxes all complete as per building specification and direction of E/I (5.5.14) |
| 23 | providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips with two layersbottom layer 19 mm thick (2:2:4)with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in patents including cost of curring, finishing the sudace smooth by rubbing with carborandum stone taxes and royalty with all complete as per building specification and direction of E/I (5.6.7) |
| 24 | Providing 12 mm thick Cement plaster in (1:3) Punningwith approved quality of clean course sand of F.M.1.5 including the cost of screening curring with all leads & lifts of water, scaffolding taxesand royalty all complete as per building specification and direction of E/I(5.7.1 + 5.7.11) |
| 25 | Providing 12 mm thick Cement plaster in (1:4) Punningwith approved quality of clean course sand of F.M.1.5 including the cost of screening curring with all leads & lifts of water, scaffolding taxesand royalty all complete as per building specification and direction of E/I(5.7.1 + 5.7.11) |
| 26 | Providing & fixing steel work welded in built up section framed work including cutting, hoisting, fixing in position all complete as per building specification and direction of E/I(D.S.R. 10.25.2) |
| 27 | Providing & fixing hard rail of approved size by welding etc. - do - do - as required.(D.S.R.10.26.3) |
| 28 | Providing Tor. steel rainforcement for R.C.C.work with cutting, bending fixing in work place as per design and drawing grade of steel F.E. - 500 (only valied for SAIL, TATA, JSPL, ELECTRO Steel Ltd and vizal steel) all complete job as per building specification and direction of E/I. (5.5.4&5.5.5 )(a)8 mm Dia Rod |
| 29 | (b) 10 mm Dia Rod |
| 30 | (c)12 mm & above Dia Rod |
| 31 | Providing & supplying white cement based putty of average thickness 1.4 M etc. - do - do - as required.(D.S.R.13.80) |
| 32 | Providing two coats of oil bond distempar of approved shade and make overa coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or finds sand paper applying putty where ever required scafolding washing of floors and taxes all complete Job as per buildingSpecification and direction of E/I(5.8.18) |
| 33 | Finishing wall with premium Acrykic smooth required shade - do - do - all complete as per specification and direction of E/I. (D.S.R.13.47.1) |
| 34 | Providing two coat of ready mixed paint over a coat of primer one coat of red lead paint approved make over a new steel surface - do - do - all complete job as per specification and direction E/I. (5.8.43) |
| 35 | Centering and shuttring including struting proping etc. and removel in (i)foundation- do - do - E/I (5.3.17.1) |
| 36 | (ii)Band of Lintel & Plinth(5.3.17.5) |
| 37 | (iii) Chajja(5.3.17.19) |
| 38 | (iv) Roof Slab&Stair Landing(5.3.17.3) : |
| 39 | (v) Stair Case(5.3.17.7) : |
| 40 | (vi) Column(5.3.17.6) : |
| 41 | Providing and laying 25mm thick white makrana marble stone slab flooring of approved quality over 19mm thick base of lime mortar (1:1:1) (Lime putty: surkhi: coarse sand) laid and joined with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.6.21 (ii) |
| 42 | Providing 1.5 mm thick CementPunningwith approved quality of clean course sand of F.M.1.5 including the cost of screening curring with all leads & lifts of water, scaffolding taxesand royalty all complete as per building specification and direction of E/I(5.7.11) |
| 43 | Supplying fitting and fixing M.S. Grill gate with M.S. grils made of 20 x 6 mm M.S. flats or 16 mm M.S. square bars fitted on 20 x 25 x 6 mm M.S. angle frame - do - do - all complete as per building specification and direction of E/I (when steel is not supplied by the Deptt.) (5.5.30) |
| 44 | Providing 65 mm dia good quality of G.I. Pipe - do - do - as per E/I. (PHED - K - VI), Page - 36. |
| 45 | Providing and laying cement concrete in return walls any thickness including attached plaster, columns, P.S., abutment posts - do - do -P.C.C.(1:1.5:3) (stone aggregate 20 mm nominal size) all complete as per building specition and direction of E/I(5.3.2.1) |
| 46 | Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royaltytaxes and royalty with all complete as per building specition and direction of E/I(5.7.14) |
| 47 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leadsall complete as per building specition and direction of E/I(5.10.4) |
| 48 | Dismantling old damaged plaster and pointing in cement or lime and taking out joints to 15 mm depth watering and disposal of unserviceable materials with all leadsall complete as per building specition and direction of E/I(5.10.7) |
| 49 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. D.S.R. Item No. 8.31 |
| 50 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqmincluding grouting the joints with white cement and matching pigments etc., complete. D.S.R. Item No. 11.39 |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. D.S.R. Item No. 12.41.2 |
| 52 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.2.23 |
| 53 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With "A" grade white 15X15cm Tiles. B.C.D. S.O.R. Item No. 5.6.23 |
| 54 | Providingand laying double charge vetrified floor tiles - do - do - E/I.(5.6.28) |
| 55 | Providing and fixing almunium (shutter) work for doors, windows, ventilators and partition with excluded builtup standard tribular section appropriate z section - do - do - E/I. (DSR21.1.2.1) |
| 56 | Providing and fixing almunium (Frame) work for doors, windows, ventilators and partition with excluded builtup standard tribular section appropriate z section - do - do - E/I. (DSR21.1.1) |
| 57 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I. B.C.D. S.O.R. Item No. 5.1.1 |
| 58 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:8) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. (5.2.53) |
| 59 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)(5.3.1.1) |
| 60 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.(5.10.34) |
| 61 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm(DSR 8.2.2.1) |
| 62 | 20 mm nominal dia Pipes (18.7.2) |
| 63 | 25 mm nominal dia Pipes(18.7.3) |
| 64 | 32 mm nominal dia Pipes(18.7.4 |
| 65 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(i) 15 mm nominal dia Pipes(18.8.1) |
| 66 | (ii) 20 mm nominal dia Pipes (18.8.2) |
| 67 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I. (3.1.5.1) |
| 68 | Providing and fixing brass/C.I. stop cock of approved quality as per specification and direction of E/I(i) Brass stop cock - 15mm dia(3.1.6) |
| 69 | Providing and fixing G.M. non return valve Horizontal / Vertical type of approved quality as per specification and direction of E/I (3.1.7)(i) Horizontal 20mm dia |
| 70 | (ii) Vertical 15mm dia |
| 71 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.32.1) |
| 72 | Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6 mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stonetaxes and royalty with all complete as per building specition and direction of E/I(5.6.9) |
| 73 | Cost of drillng 200 MM x 165 MM x 125 Mtr. Deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH ring machine all complete including all materials, tools, drilling rig air compressure and equipments as well as fule febricants and cost of transportation of rig machine and other vehical up to site.(PHED Page no. 58 Item no. 119 M 1035)(a) From 0.00 M to 50.00 M below G.L. |
| 74 | (b) From 51.00 M to 125.00 M |
| 75 | Supplying assembling lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS : 12818 including required hire and labour charges, fitting & accessories etc. all complete for all depths as per direction of E/I (200 MM nominal size dia) (D.S.R. 23.3.3) |
| 76 | Development of tube well in accordance with IS : 2800 (Pari-1) and IS : 11189 to establish maximum rate of usable water yield without sand cement (beyond permissible limit) with required capacity aircompressor, running the compressor for required time till well is fully developed, measuring yield of well by ""V"" notch method or any other approved method measuring static level & draw down etc. by step draw down method, collecting water samples & getting testedin approved laboratory i/c disinteetion of tubewell, all complete including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of E/I. (D.S.R.23.12) |
| 77 | Providing & fixing suitable size threaded mild steel cap or spot welded place to the top of bore well housing / casing pipe removable as per requirement all complete for borewell of 200 MM dia. (D.S.R.23.13.3) |
| 78 | Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS : 2800 (part-1) including necessary bolts & nuts of required size complete 200 mm clamp (D.S.R.23.14.3) |
| 79 | Supplying and commissioning of submersible pump set of reputed KSB/ Texmo make ISI, ISO 9001 marked or having ISO 9001 - 2000 submersible motor pump for HYDT & head of 100.00 M having discharge 4000Ltr./Hour and lowering mm dia PVC submersible schedule 80 pipe & 2.5 sq. mm size finolex copper cable about 80.00 m with main switch 32 Amp & panel board sonsisting volumeter ammeter, on/off switch HRC fuse unit and lighting arrangement, adopter, rope with all complete job as per specification and direction of E/I (1.5 HP (15572 + 10% CP) (Supply PHED pg no. 64, Item 139 (1055) |
| 80 | Supply fiting and fixing of 10 H.P. standered make starter pannel board with arrangment of all necessary portection including all taxes, royalty etc. all complete job as per specification and direction of E/I(PHED P - 74, Sl. 149 M - 1065) |
| 81 | Supply fiting and fixing 3 core 4 sq mm flat copper submersible cable Finolex/ Hevels make including all taxes, royalty all complete job as per specification and direction of E/I (PHED Page no. 71Item no 146 M 1062) |
| 82 | Supplyand fixing Chlorinated polyvinyl chloride (CPVC)pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of E/I(40 mm nominal outer dia pipe)(D.S.R.18.7.5) |
| 83 | Supplyand fixing Chlorinated polyvinyl chloride (CPVC)pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of E/I(Excluding GST 32 mm nominal outer dia pipes)(D.S.R.18.7.4) |
| 84 | Polythene water storage tank of ISI mark (e.g. Sintex/Sinter/Himgir/Gangotri etc.) with cove and locking system Page 32 Sl. No. 01 (M 079) |
| 85 | Providing and laying factory made coloured chamfered edge cement concrete 60 mm thick C.C., paver block of M-35 grade with approved colour, design & pattern. required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways of light traffic parking etc. complete as per manufacturer"s specification & complete of Engineer - in - charge(D.S.R. - 16.68) |
| 86 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I "p" trap 15 liters C.I. or C. pull and let go flushing cisternofnames or other I.S.S equivalent make, complete with all fittings. C.I or C.Cbrackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull includingsupplyingand fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580mm long with 12.5 lit. low level P.V.C. cistern (3.2.1 A) |
| 87 | Supplying, fining and fixing 40mm high viterous white glazed earthen ware E.W.C with P-trap of Parry, Hindustan or any other I.S.S. make including supplying and fixing 15 ltr. C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle or R.S. brackets with telescopic flush pipe with brass coupling and plumber joints spindle stop cock of approved quiality weight not less than 450 grams, 15 mm P.V.C alkathene pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of Commander/Cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern wtc. with two coats of approved paint over a coat of red oxide primeing, all complete as per specification and direction of E/I. (3.2.2) |
| 88 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware Urinal of Parry Hindustan or any other I.S.S approved make with 5 liters capacity C.I. outomatic flushing cistern ofReliance or other I.S.S approved make with all fittings with C.I or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I body brass spindle stop cock of approved quality weight not less than 400 grams, 15 mm P.V.C./Alkethene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a primer coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. (3.2.3) |
| 89 | Supplying, fining and fixing viterous white glazed earthen ware Indian squatting type 600x350mm urinal plate of Parry Hindustan or any other I.S.S approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1 M long 5 liters capacity C.I. automatic flushing cistern ofReliance or any other approved make with fittings R.S. or C.I brackets 15mm and 45 cm long alkathene/P.V.C pipe, standard G.I. flush pipe for back and front with spreader fittings and brass coupling etc.15 mm C.I body brass spindle stop cock of weight not less than 450 grams. all complete including painting of exposed parts with two coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification and direction of E/I.(3.2.4) |
| 90 | Supplying, fitting and fixing wash basin with C.I. or M.S. brackets 15mm C.P. brass pillar tap Kingston/Gem/ Techno/Ponco 2mm C.P. brass waste of standard pattern including painting and fitting of brackets, cutting and making good the wall wherever required - Flat back wash basin size 550 x 400mm with single 15mm C.P. brass pillar tap all complete as per specification and direction of E/I. (3.2.5) |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall(18.7.4) |
| 92 | Providing and fixing brass/C.I. stop cock of approved quality as per specification and direction of E/I. Brass stop cock - 15mm dia(3.1.6) |
| 93 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. (3.1.13) (A) Elbow : 15mm dia - |
| 94 | 20mm dia - |
| 95 | 32mm dia - |
| 96 | (B) Tee Plain : 15mm dia - |
| 97 | 20mm dia - |
| 98 | 32mm dia - |
| 99 | (C) Reducing Socket : 20mm dia - |
| 100 | 32mm dia - |
| 101 | (D) Nipple :15mm dia - |
| 102 | 20mm dia - |
| 103 | 32mm dia - |
| 104 | (E) Plugs :15mm dia - |
| 105 | 20mm dia - |
| 106 | 32mm dia - |
| 107 | (F) Reducing Tee Plain : 20mm dia - |
| 108 | 32mm dia - |
| 109 | (G) Socket : 15mm dia - |
| 110 | 20mm dia - |
| 111 | 32mm dia - |
| 112 | (H) Union Socket : 15mm dia - |
| 113 | 20mm dia - |
| 114 | 32mm dia - |
| 115 | Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C. (1:2:4), brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direcition of E/l.(3.1.17) |
| 116 | Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I. (3.1.18) |
| 117 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes.(DSR 12.41.2) |
| 118 | Supplying, fitting and fixing of following item complete with all materials etc. all complete as per specification and direction of E/I. Mirror of 4mm thick plain glass bottled edge (450 x 300mm) -(3.1.21 B (ii) |
| 119 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(DSR 12.42)(i) Coupler - 110mm(DSR 12.42.1.2) |
| 120 | (ii) Single tee without door - 110 x 110 x 110 mm(12.42.3.2) |
| 121 | (iii) Bend 87.5° - 110 mm bend(12.42.5.2) |
| 122 | (iv) Shoe (Plain) - 110mm (12.42.6.2) |
| 123 | Providing and fixing vetrious china scruting plate urinal- do - do -all complete job as per specification and direction E/I.(D.S.R.19.1.5) |
| 124 | Providing and fixing white vitreous china pedestalar wash basin completely recessed at the back for the reception of pipe sand fitting - do - do -all complete job as per specification and direction E/I.(D.S.R. 17.8) |
| 125 | Providing and fixing P.V.C. waste pipe for sink orbasin including PVC waste fitting complete (32 mm dia)- do - do -all complete job as per specification and direction E/I.(D.S.R. 17.28.1.1) |
| 126 | Providing and fixing chlorinated polyvingl chloride (CPVC) pipes having thermal estability for hot and cold water sypply - do - do -all complete job as per specification and direction E/I.(D.S.R. 18.8) (i) 15 mm nominal outer dia pipes (D.S.R. 18.8.1) |
| 127 | (ii) 20 mm nominal outer dia pipes (D.S.R. 18.8.2) |
| 128 | (iii) 32 mm nominal outer dia pipes (D.S.R. 18.8.4) |
| 129 | UPVC Pipe working pressure 4 Kg. per c.m2) single socket pipe 75 mm dia - do - do -all complete job as per specification and direction E/I.(DSR Page 45, Sl. No. 7188) |
| 130 | UPVC Pipe working pressure 4 Kg. per c.m2) single socket pipe 110 mm dia - do - do -all complete job as per specification and direction E/I.(DSR Page 45, Sl. No. 7189) |
| 131 | Providing and fixing C.P. Brass bibcock of approved quality confirming to IS 8931,15 mm dia nominal bore - do - do -all complete job as per specification and direction E/I.(DSR 18.49.1) |
| 132 | Providing and fising C.P.Brass long body bibcock 15 mm dia - do - do -all complete job as per specification and direction E/I.(DSR18.51.1) |
| 133 | Providing and fixing C.P. Brass stop cock 15 mm dia - do - do -all complete job as per specification and direction E/I.(DSR18.52.1) |
| 134 | Providing C.P. Brass angle valve for basin mixure and gizer point 15 mm dia nominal size - do - do -all complete job as per specification and direction E/I. (DSR18.53.1) |
| 135 | Providing and fixing C.P. Brass extension nipple size 15 mm x 50 mm of approved make- do - do -all complete job as per specification and direction E/I. (DSR18.53. (A) |
| 136 | Providing and fitting PTMT Bib cock of approved quality and colour (15 mm nominal bore 86 mm long rate not less than 88 gram)(DSR 18.54.1) |
| 137 | Providing and fitting PTMT stop cock of approved quality(15 mm nominal bore 86 mm long rate not less than 88 gram)(DSR18.55.1) |
| 138 | Providing and fixing CI double acting air valve of approved quality with builts, nuts, rubber insertion etc complete (50 mm dia)(DSR 18.59.1) |
| 139 | Providing partition marble 25 mm makrana marble - do - do -all complete job as per specification and direction E/I.(5.6.22) |
| 140 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group-B(1.1.3) |
| 141 | Wiring for light/ power plug with 2x4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.(1.5) |
| 142 | Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. as required. (1.24) 4-3 pin 5/6 amp socket outlet(1.24.4) |
| 143 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.(1.7) (i) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire(1.7.2) |
| 144 | (ii) 2 x 6 sq.mm + 1 x 6 sq.mm earth wire(1.7.4) |
| 145 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(1.25) |
| 146 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.(1.3.3) |
| 147 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.(1.33) |
| 148 | Supplying and fixing brass batten/angle holder including connection etc. as required.(1.34) |
| 149 | Supplying and fixing of ceiling fan - 48" dia with regulator. (M - 772) |
| 150 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.(1.44) |
| 151 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(2.8.3) |
| 152 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, "B" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, Single Pole, "B" Series(2.11.1) |
| 153 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps (2.14.1) |
| 154 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32 amps Double Pole(2.1.2) |
| 155 | Supplying XLPE indulated PVC sheathed, heavy duty armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Conforming to IS : 7098, Part-1).(M - 739) |
| 156 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(3.2) |
| 157 | Supplying and laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc. as required.(3.7) |
| 158 | Supplying and fixing 1 x 28 watt T5 Tubelight fittigs with 40 watt tubelight and 40 watt choke.(M-863 + M 864 + M 865) |
| 159 | Supplying and fixing of holder type LED - 9/10 watt (M - 855) |
| 160 | Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required. (1.23) (i) 5/6 amp switch(1.23.1) |
| 161 | (ii) 4-3 pin 5/6 amp socket outlet (1.23.4) |
| 162 | Supplying and fixing metal box of 75mm x 75mm x 50mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).(1.29) |
| 163 | Supplying and fixing metal box of 121mm x 173mm x 48mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. |
| 164 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, "B" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, Single Pole, "B" Series (2.11.1) |
| 165 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 amps Double Pole (2.1.3) |
| 166 | Carriage of Material : (a) Sand Lead 50 Km. Surface road |
| 167 | (b) Chips Lead 30 Km. Surface road |
| 168 | (c) Brick Lead 01 Km. Kachha and 07 Km Surface road |
| 169 | Goods & Service Tax (G.S.T.) - |
| 170 | Labour Cess - |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
