Defence Research And Development Organisation -DRADO has published Operation And Maintenance Of E And M Installation Including Central Ac Plant At Meteorology Centre And Psd Building At Itr, Chandipur, Cce(R And D)E/Enq-102/Om/Bls/2021-22 Operation And Maintenance Of E And M Installation Including Central Ac Plant At Met. Submission Date for this Tender is 28-03-2022. HVAC Tenders in Baleshwar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | OPERATION AND MAINTENANCE OF E&MINSTALLATIONINCLUDING CENTRALAC PLANT AT METEOROLOGY CENTRE & PSD BUILDING AT ITR, CHANDIPURFY 2022-23 Scope of Work as per Part-III, at Para 4.1 Payment terms as per clause 5.19.1. Vendors are required to enter amount which is more than the minimum wages + GST (i.e. Rs 3,09,845.82) for the bid to be classified as responsive. Payment will be made on Prorate basis as per Manpower deployed at site, based on presence / absence report during the month. Manpower will be provided as given below :- (i)Supervisor (Highly Skilled) - 01 (ii) AC Plant Operator (Skilled) - 03(iii)DG Operator (Skilled)- 03 (iv) Electrician(Skilled)-02 (v) Plumber (Skilled)-01 (vi) Helpers (Un-skilled, including -05 Leave Reserve) Total -15 Note : The contractor shall factor in anticipated increase in fare minimum wages by the Chief Labour Commisioner, Govt of India, Ministry of Labour (4.8.3), and quote accordingly. This office shall NOT amend the contract amount on account of wage, revision during the contract period including extension, if any. The contractor shall pay to the employees as per wages revised by the Chief Labour Commissioner, Govt of India, Ministry of Labour, from time to time. |
| 2 | B" Check of 320 KVA DG Set Make : Cummins including "B" Check spares and Engine oil by OEM/Authorised dealer once in a year at Chandipur. Payment willbe made on prorata basis for "B" check as per schedule. |
| 3 | B" Check of 100 KVA DG Set Make : Cummins including "B" Check spares and Engine oil by OEM/Authorised dealer once in a year at Chandipur. Payment willbe made on prorata basis for "B" check as per schedule. |
| 4 | Service Engineer visit for 11KV VCB Panel, Make-Schnider. Payment willbe made on prorata basis for visit as per schedule. |
| 5 | Service Engineer visit from Authorises Service Provider of Cummins for DG. Payment willbe made on prorata basis for visit as per schedule. |
| 6 | Bearing for Motors (6203) Make - TATA/eqvt |
| 7 | Bearing for Motors (6205) Make - TATA/eqvt |
| 8 | Bearing UCB-205-16 Make - TATA/eqvt |
| 9 | Fan Regulator Step, 2 Module, Anchor/Philips/Havells |
| 10 | Fan Blade for 1200 mm fans, white, (Set of 3), Havells/CG/Bajaj |
| 11 | Fan Clamp with Rubber for ceilin Fan |
| 12 | Capacitor for Fan, 2.5 MFD, Bajaj/Havells/CG |
| 13 | Capacitor for Exhaust fan, 4 MFD, Havells/CG/Bajaj |
| 14 | Capacitor for Exhaust fan, 6 to 10 MFD, Havells/CG/Bajaj |
| 15 | Outside cover for exhaust fan, 300 mm, Havells/CG/Bajaj |
| 16 | Exhaust Fan, 150mm, Plastic Body complete, Havells/CG/Bajaj |
| 17 | Exhaust Fan, 250mm, Plastic Body complete, Havells/CG/Bajaj |
| 18 | Ceiling Fan, 48", 1400MM, Make - CGL/Bajaj/Havells |
| 19 | Rewinding of Ceiling Fan/Exhaust Fan, Copper winding |
| 20 | Tube light Fluorescent Rod, T8, 36/40W, Code No-LHLFDLCENL7O036, Make-Havells |
| 21 | Tube Light 14W TL 5 (865), Make-Havells/Bajaj/Philips |
| 22 | LED Tube light Fluorescent Rotor Fit, T8, 18/20W, Make-Havells/Bajaj/Philips |
| 23 | LED Tube light Fluorescent, T5, 8W-10W, 1 feet long, Make-Havells/Bajaj/Philips |
| 24 | LED Tube light, T8, 20W, complete fitting, Code No-LHEXACP7IN1 W020, Model-E-Lite LED Pride Plus Neo, Make-Havells |
| 25 | Solor LED Street light, 35W, Make-Phillips/Sukam/Urja/Omega/Tata/Syska |
| 26 | Holder for Tube light, Pin Type, Bajaj/Anchor/Philips |
| 27 | Holder for Tube light, Push Type, Bajaj/Anchor/Philips |
| 28 | Starter for tube light, 18/36W, Code No-LHYF02000099, Make-Havells |
| 29 | Electronic Ballast for Tube Light, 40/36W, Code No-LHBF01904025, Make-Havells |
| 30 | Electronic Ballast for 2x18W Cross Pin PL Lamp, Make-Havells/Bajaj/Anchor/Philips |
| 31 | Electronic Ballast for 2x18W 4 Pin PL Lamp, Make-Havells/Bajaj/Anchor/Philips |
| 32 | Electronic Ballast for 4x14W TL 5 Tube Light, Make-Havells/Bajaj/Anchor/Philips |
| 33 | Lamp PL 2 Pin, 11 W, Bajaj/Anchor/Philips |
| 34 | Lamp PL Cross Pin, 18 W, Bajaj/Anchor/Philips |
| 35 | Lamp PL 4 Pin, 18 W, Bajaj/Anchor/Philips |
| 36 | LED Lamp, 9 W, Code No-LHLDEUHEML8R009, Make:Havells |
| 37 | LED Lamp, 20 W, Code No - LHLDEUEEML8R020, Make-Havells |
| 38 | Holder Bettan Brass, Philips/Bajaj/Anchor |
| 39 | Holder Bettan PVC, Anchor/Philips/Havells |
| 40 | Holders CFL lamp 4 Pin Type, Philips/CG/Anchor/Bajaj |
| 41 | Holder cross pin, Philips/CG/Anchor/Bajaj |
| 42 | Holder for PL Lamp, 11W, Philips/CG/Anchor/Bajaj |
| 43 | Switch Modular, 10A, ISI Marked, MK/Havells/Anchor |
| 44 | Switch Modular 2 Way, 10A, ISI Marked, MK/Havells/Anchor |
| 45 | Switch Modular, 16A, ISI Marked, MK/Havells/Anchor |
| 46 | Socket 5 pin, 6A, ISI Marked, Anchor/Philips/Havells |
| 47 | Socket 5 pin Modular, 6A, MK/Havells/Anchor |
| 48 | Socket 6 pin, 16A, Anchor/Philips/Havells |
| 49 | Socket 6 pin Modular, 20A, MK/Havells/Anchor |
| 50 | Switch & Socket combination, 6A , Anchor/Philips/Havells |
| 51 | Switch & Socket combination, 16A , Anchor/Philips/Havells |
| 52 | Plug Top, 2 Pin, 6A, Anchor/Philips/Havells |
| 53 | Plug Top, 3 Pin,6A, ISI Marked, Anchor/Philips/Havells |
| 54 | Plug Top, 3Pin, 16A, ISI Marked, Anchor/Philips/Havells |
| 55 | Lamp MH, 70W, Havells/CG/Bajaj |
| 56 | LED Street Light, 45/50 W, Havells/CG/Bajaj |
| 57 | LED Street Light, 70 W, Havells/CG/Bajaj |
| 58 | LED Street Light, 100 W, Havells/CG/Bajaj |
| 59 | LED Driver for street light 45 to 70 W, Havells/CG/Bajaj |
| 60 | LED Flood Light, 50 W, Havells/CG/Bajaj |
| 61 | LED Flood Light,100 W, Havells/CG/Bajaj |
| 62 | LED flood Light, 150 W, Havells/CG/Bajaj |
| 63 | LED flood Light, 250 W, Havells/CG/Bajaj |
| 64 | LED Driver for Flood light 50 to 100 W, Havells/CG/Bajaj |
| 65 | Copper Ballast, 70W, Havells/CG/Bajaj |
| 66 | Capacitor, 20 MFD to 42 MFD, Havells/CG/Bajaj |
| 67 | Halogen lamp 500W (CGL / Philips) |
| 68 | Halogen lamp fitting 500W (CGL/ Philips) |
| 69 | PVC Box for STL DB, 300x200x100mm, Syntex/Havells/CG |
| 70 | Bolt connecter, 4 way, 32 Amp, Syntex/Havells/CG |
| 71 | GI Box (3-Way) for Modular Switches Make - Anchor/Havells/CG |
| 72 | PVC Box 150mm x 100mm, Anchor/Havells/CG |
| 73 | Screw for modular switch board, 2 in, SS, Pkt of 50 pc , MK/Anchor/Bajaj |
| 74 | Screw for modular switch board, 3 in, SS, Pkt of 50 pc , MK/Anchor/Bajaj |
| 75 | Casing capping PVC, 20mm, length of 3 mtr, Surya/Plasto/Vectus |
| 76 | Casing capping PVC, 25mm, length of 3 mtr, Surya/Plasto/Vectus |
| 77 | Casing Clip, Pkt of 100 pc, Surya/Plasto/Vectus |
| 78 | Wire Copper flexible, Single core, 1.0 Sqmm, Coil of 90 mtr, Havells/Finolex/KEI |
| 79 | Wire Copper flexible, Single core, 2.5 Sqmm, Coil of 90 mtr, Havells/Finolex/KEI |
| 80 | Wire Copper flexible, Single core, 4 Sqmm, Coil of 90 mtr, Havells/Finolex/KEI |
| 81 | Element Push Button (Red, Green) , Havells/CG/Anchor |
| 82 | MCB, SP, 10A, Havells/Finolex/KEI/L&T |
| 83 | MCB, SP, 16A, Havells/Finolex/KEI/L&T |
| 84 | MCB, SP, 32A, Havells/Finolex/KEI/L&T |
| 85 | MCB, DP, 32A, Havells/Finolex/KEI/L&T |
| 86 | MCB, DP, 40A , Havells/Finolex/KEI/L&T |
| 87 | MCB, DP, 63A, Havells/Finolex/KEI/L&T |
| 88 | MCB, 4P, 40A, Havells/Finolex/KEI/L&T |
| 89 | MCB Channels, Havells/Finolex/KEI/L&T |
| 90 | Relay MN-2.5 - 4 overload, Make-L&T/Havells |
| 91 | Cable Lugs Aluminium, 16 mm , Havells/Finolex/KEI |
| 92 | Cable Lugs Aluminium, 25 mm , Havells/Finolex/KEI |
| 93 | Cable Lugs Aluminium, 35 mm , Havells/Finolex/KEI |
| 94 | Amps Meter analog, 0 - 200 Amp/0 - 200 Amp/0 - 300 Amp, HPL/Techno/Flora |
| 95 | Volt Meter analog, 0-500 V, HPL/Techno/Flora |
| 96 | Industrial idicator LED, Red, Yellow, Blue, Havells/CG/Anchor |
| 97 | Contactor ML 1.5 Make - L&T/Legrand |
| 98 | Contactor 16 AMP 4 Pole, Make - Havells/Finolex/KEI |
| 99 | Contractor 2 NO/2 NC Make-L&T |
| 100 | Primer for Steel Surface, Make-Berger/Asian/Dulex |
| 101 | Synethic Enamel Paint (Red/Yellow/Blue/Black/Green) in 1 Ltr Container, Make-Berger/Asian/Dulex |
| 102 | PVC Cutting Box, 2way/3way/4way/6way |
| 103 | Bibcock Short body with Flange, 15mm, CP, Prayag/Hindware/Parryware |
| 104 | Bibcock long body with Flange, 15mm, CP, Prayag/Hindware/Parryware |
| 105 | Pillar cock, 15 mm, CP, Prayag/Hindware/Parryware |
| 106 | Angular Stop Cock with Flange, 15mm, CP, Prayag/Hindware/Parryware |
| 107 | Waste Coupling for Wash Basin, CP, Prayag/Hindware/Parryware |
| 108 | Waste Pipe for Wash Basin, 50x800mmPVC, Prayag/Hindware/Parryware |
| 109 | Shower Overhead with Arm, 6", CP, Prayag/Hindware/Parryware |
| 110 | Looking Mirror 2.5 x 4 Ft, Prayag/Hindware/Parryware |
| 111 | Floor Trap Jali, SS, (05 pc per pkt), Prayag/Hindware/Parryware |
| 112 | Cistern, PVC, Prayag/Hindware/Parryware |
| 113 | Connection pipe for Urinal / Cistern / Wash Basin, 24"/600 mm, PVC, Prayag/Hindware/Parryware |
| 114 | Connection Pipe for Geyser Hot and Cold, 24"/600mm PVC, Prayag/Hindware/Parryware |
| 115 | Waste Pipe, PVC, Prayag/Hindware/Parryware |
| 116 | Connecting Pipe PVC 15mm, Make-Prayag/Hindware/Parryware |
| 117 | Cistern Float Valve 15mm, PVC, Make-Prayag/Parryware |
| 118 | Cistern Handle PVC |
| 119 | Hand shower, Make-Jaquar/Prayag/Hindware/Parryware |
| 120 | Bottle Trap, Make-Jaquar/Prayag/Hindware/Parryware |
| 121 | UPVC Ball Valve, 50mm, Make-Jaquar/Prayag/Parryware |
| 122 | 1"" Garden Pipe, ISI Marked, Hariplast/eqvt |
| 123 | Cover for water tank, PVC, Syntex/Plasto/Vectus |
| 124 | Tank Nipple, 25 mm, GI, ISI Marked, Unik/Amco/Oswal |
| 125 | Tank Nipple, 50 mm, GI, ISI Marked, Unik/Amco/Oswal |
| 126 | Ball Cock, 15 mm, Brass, ISI Marked, Unik/Amco/Oswal |
| 127 | Ball Cock, 20 mm, Brass, ISI Marked, Unik/Amco/Oswal |
| 128 | Ball Cock, 25 mm, Brass, ISI Marked, Unik/Amco/Oswal |
| 129 | Ball Valve, 15 mm, Brass, Unik/Amco/Oswal |
| 130 | Ball Valve, 20 mm, Brass, Unik/Amco/Oswal |
| 131 | Ball Valve, 25 mm, Brass, Unik/Amco/Oswal |
| 132 | Gate Valve, 15 mm, Brass, ISI R Brand, Zoloto/Unik/Amco |
| 133 | Gate Valve, 20 mm, Brass, ISI R Brand, Zoloto/Unik/Amco |
| 134 | Gate Valve, 25 mm, Brass, ISI R Brand, Zoloto/Unik/Amco |
| 135 | Gate Valve, 40 mm, Brass, ISI R Brand, Zoloto/Unik/Amco |
| 136 | Foot Valve, 150 mm, MS, Flach Type, ISI Mark, Zoloto/Unik/Amco |
| 137 | Gland for Pump, Model No-CE-80/26 |
| 138 | Bearing set for Pump, Model No-CE-80/26 |
| 139 | Bearing set for Pump, Model No-DB 50/32K |
| 140 | Gland for Pump, Model No-CPHM 50/32K |
| 141 | Reducer Socket, 20mm × 15mm, GI, Unik/Jindal/Sun |
| 142 | Reducer Socket, 25mm × 15mm, GI, Unik/Jindal/Sun |
| 143 | Reducer Socket, 25mm × 20mm, GI, Unik/Jindal/Sun |
| 144 | Elbow, 15mm, GI, Unik/Jindal/Sun |
| 145 | Elbow, 20mm, GI, Unik/Jindal/Sun |
| 146 | Elbow, 25 mm, GI, Unik/Jindal/Sun |
| 147 | Reducing Elbow, 25mm × 20mm, GI, Unik/Jindal/Sun |
| 148 | Socket, 15mm, GI, Unik/Jindal/Sun |
| 149 | Socket, 20mm, GI, Unik/Jindal/Sun |
| 150 | Socket, 25mm, GI, Unik/Jindal/Sun |
| 151 | Plug, 20mm, GI, Unik/Jindal/Sun |
| 152 | Nipple, 15mm × 50mm, GI, Unik/Jindal/Sun |
| 153 | Nipple, 20mm × 50mm, GI, Unik/Jindal/Sun |
| 154 | Nipple, 20mm × 100mm, GI, Unik/Jindal/Sun |
| 155 | Nipple, 25mm × 50mm, GI, Unik/Jindal/Sun |
| 156 | Nipple bit, 15mm, GI, Unik/Jindal/Sun |
| 157 | Pipe, 15 mm, GI, Medium Grade B, Tata/Jindal/Zenith |
| 158 | Pipe, 20 mm, GI, Medium Grade B, Tata/Jindal/Zenith |
| 159 | Pipe, 50 mm, GI, Medium Grade B, Tata/Jindal/Zenith |
| 160 | PVC Pipe, 25mm, Schedule 40, Prayag/Plasto/Vectus |
| 161 | UPVC Reducer Socket, 20mm x 15mm , Prayag/Plasto/Vectus |
| 162 | UPVC Reducer Socket, 25mm x 15mm , Prayag/Plasto/Vectus |
| 163 | UPVC Union, 25mm , Prayag/Plasto/Vectus |
| 164 | UPVC Socket, 20mm , Prayag/Plasto/Vectus |
| 165 | UPVC Elbow, 20mm , Prayag/Plasto/Vectus |
| 166 | UPVC Tee, 20mm , Prayag/Plasto/Vectus |
| 167 | UPVC Brass FTA, 20mm x 15mm, Prayag/Plasto/Vectus |
| 168 | UPVC Brass MTA, 20mm x 15mm, Prayag/Plasto/Vectus |
| 169 | Bleaching Powder |
| 170 | Non return Valve 80mm to 150mm, Audco, CI Body Flanged |
| 171 | Flage MS, 20mm, Make-Sun/Zoloto/Audco |
| 172 | Flage GI, 25mm to 50mm, Make-Sun/Zoloto/Audco |
| 173 | Control Assemble Part No 03006014, Make-Cummins |
| 174 | Engine Oil 20W-40W, Item No-504626, Make-Valvoline Premium Blue 7800 Plus |
| 175 | Buy Back Battery 12 Volt 32AH, Exide/Amco/Luminous/Cummins |
| 176 | Buy Back Battery 12 Volt 25 Plate 100 AH, Exide/Amco/Luminous |
| 177 | Buy Back Battery 24 Volt, 32 AH, Exide/Amco/Luminous/Cummins |
| 178 | Rotatory Hand Operated Barrel and Oil Drum Pump, Steel, Heavy Duty |
| 179 | 100 Ltr capacity PVC Barrel for Oil Storage, Heavy and Unbreakable, High Grade PVC |
| 180 | Measurement Cane 10 Ltr |
| 181 | Measurement Cane 5 Ltr |
| 182 | Measurement Cane 2 Ltr |
| 183 | R-22 Freon Gas for AC Plant |
| 184 | Coupling Set MS RRL-110/140 for Condonser Pump & Motor |
| 185 | Coupling Set MS L-110 for Chilled water Pump & Motor |
| 186 | Coupling Rubber L-110 |
| 187 | Fan Blade (Condonser Motor 12.5 HP) (Plastic) |
| 188 | Fan Blade (Chilled water Motor 10 HP) (Plastic) |
| 189 | Pressure (Gas) Guage Meter 0-500 Kg complete set for AC Plant |
| 190 | AHU Blet Type A-32 to A-52, Make-Eggo/Fenner/Dunlop |
| 191 | Welding Work |
| 192 | Lateh Work |
| 193 | 5 HP to 7.5 HP Moto Rewinding |
| 194 | 10 HP to 12.5 HP Moto Rewinding |
| 195 | Servicing of 5 to 7.5 HP Motor |
| 196 | Servicing of 10 to 12.5 HP Motor |
| 197 | Contactor MNX 18 Coil 240Volt, Make-L&T |
| 198 | MNX A1 Auxiliary Contacts 10 Amp 415V, Make-L&T |
| 199 | MNX A2 Auxiliary Contacts 10 Amp 415V, Make-L&T |
| 200 | VSP-3, Single Phase, Preventer, (System Supply), 415V AC, 50Hz, Make-L&T |
| 201 | Connectwell, CTS, 10U, 5mm to 10mm |
| 202 | Timmer for AC Plant |
| 203 | Shaft Sleeve for Pump |
| 204 | LWT & EWT Sensor, Make-Blue Star, ISI Marked Termister Probe A/W 3 mtr WIR |
| 205 | HT Insulator, 11 KVA, ISI Marked |
| 206 | Non Schedule Items (Refer Para 4.7) Three (03) quotations from OEM"s / Authorised Firm are required for NS items and lowest quotation will considered for procurement. Vendors are required to enter Rs 1,50,000/- against this item which is the budget for Non Schedule items in this contract. No other figure above or below this lumpsum can be entered. |
| 207 | Note:- 1) The Firm should quote for Spares will be inclusive of all taxes andService Charges. No extra payment will be admisible. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
