Military Engineer Services-MES has published Repair/Maint Of Fire Alarm/Detection System At Tech Bldg At Npol And Repair/Maint To Water Supply Installation And Connected Works, Dg Sets Along With Amf Panels Installed At 14 Asc Af Kochi Repair/Maint Of Fire Alarm/Detection System At Tech Bldg At Npol. Submission Date for this Tender is 17-03-2022. Fire Alarm Systems Tenders in kochi Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Mar-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-03-2022 |
| Sl. No. | Item Description |
| 1 | Periodical service/ Checking of fire detecting/Alarmsystem comprising of Fire alarm panel, MCP, Fire/Smoke detectors at following building complete including checking all control circuit andconnection from sensor to microprocessor based fire alarm panel, for smooth functioning by employing one skilled tradesman. (Rate is inclusive of any repairs involved and also replacement of unserviceable spares. Required spares shall be measured and paid separately under relevant items of this schedule). |
| 2 | Coop Bldg of NPOL |
| 3 | TIRC at Main Lab Bldg |
| 4 | MATSLab Bldg |
| 5 | SONEXLab Bldg |
| 6 | MSLab Bldg |
| 7 | QSLab Bldg |
| 8 | Note:- (i) Contractor shall carry out following tests and submit reports as per details given below for which no extra payment will be claimed/paid. |
| 9 | (ii) The contractor should attend any complaint / break down immediately at par of number of times on call basis (iii) The technicians employed should be trained and having sound knowledge about fire detecting /Alarm system. |
| 10 | (iv) Cheking the serviceability of smoke detector by creating the heat / smoke artificially at sensing range of smoke detector and rest the alarm panel after checking each smoke detector and also to check the indication of alarm panel as per the Zone wise. (V) Replacement old/Unserviceble small piece of wires up to one Rm of size up to 2.5 sq mm as directed. . |
| 11 | Supply only Digital Multi Sensor smoke and heat detectors, Optical Detector, of Rise and Fixed temperature heat detector, flashing LED, Algorithms and mapping drift compensation, 8 bit processor with remote indicator output,all as specified and directed. Make: Cooper/GST/System Sensor |
| 12 | Supply only conventional combined Sounder and strobe (Hotter). all as specified and directed |
| 13 | Supply only conventional combined Sounder and strobe with one Kilometer range (siren) all as directed |
| 14 | Supply only manual call point all as specified and directed . |
| 15 | Supply only Light indicator work as fire Indicator all as specified and directed. |
| 16 | Supply only fire alarm 8 Zone panel and opening all connection same connection connect to new panel complete all as specified and directed. |
| 17 | Supply only 1.5 Sqmm2 core copper conductor armoured Cable on wall/laying with suitable size of fixing arrangement all as specified and directed |
| 18 | Supply only 1.5 Sqmm4 core copper conductor armoured Cable on wall/laying with suitable size of fixing arrangement all as specified and directed |
| 19 | Supply only 1.5 Sqmm14 core copper conductor armoured Cable on wall/laying with suitable size of fixing arrangement all as specified and directed |
| 20 | Supply only battery 24 volt for fire alarams and control panels including incoming and outgoing connection complete all as specified and directed. |
| 21 | Comprehensive Maintenance, Servicing and carrying out periodical service to DG set along with AMF panel or standard panel like carry out oil service and routine checkup/maintenance as per manufacturers schedule, checking complete system of lubrication, cooling systems, air intake systems, fuel systems, exhaust systems, DC/AC electrical systems in DG Set as well as in AMF/Standard Panel, tightening bolts and nuts in engine and alternator related systems, etc and repairs including material for renewal/ replacement of minor defective parts of like connectors, MCBs, phase indication lamps etc for following capacity of DG sets all as specified and directed by Engr in charge. |
| 22 | 35 KVA with AMF Panel installed at 14 ASC, AF Kakkanad |
| 23 | 20 KVA with AMF Panel installed at 14 ASC |
| 24 | Note:(i)The spares to DG Sets items as listed below as SUPPLY ONLY will be used whenever required only and it shall measured and paid separately under respective items. (ii) The rate is inclusive of all items as required at siteexcept those itemsas SUPPLY ONLY below to keep the DG Set along with AMF / Standard panel on monthly basis complete all as specifiedand as directed by Engr-in-Charge. |
| 25 | (iii) The contractor should attend any complaint / breakdown immediately on call basis and even no of times without any extra cost. (iv) Contractor should submit the inspection / maintenance report of every visit inspite of no of visits during breakdown calls including mentioning the status of DG Sets and spares any replaced |
| 26 | (v) The old unserviceable spares replaced under comprehensive maintenance is the property of contractor for which credit shall be deducted under respective items in schedule of credit. (vi) All AMF panels and standard DG set panels should be well cleaned with CTC solution checking all the electrical connection and tighten for any loose connection. |
| 27 | Supply only Engine oil 20W/40 grade during replacing of old oil in item No 02 above |
| 28 | Supply only Lub Oil Filter for DG set 15 KVA to 35 KVA |
| 29 | Supply only fuel filter forDG set 15 KVA to 35 KVA |
| 30 | Supply only Oil pressure gauge for DG set of any size/make |
| 31 | Recharging of Battery 12 Volts , up to180 AH any make / type by replacing electrolyte including replacement of unserviceable terminal posts , to the required standard complete all as specified andas directed . |
| 32 | Supply only Diesel hose of size 5/16 all as directed |
| 33 | Supply only Battery terminals one end socket and the other end clamp type including brazing work and applying jelly over the battery terminal and pole all as directed by the Engr in charge |
| 34 | Supply only Water hoses complete set of engineDG sets of cap 15 to 35 KVA |
| 35 | Supply only Battery capacity of 12 V 88/90 AH Make : EXIDE/TATA/AMARON |
| 36 | Repairs to 12 V self starter of DG set engine by dismantling, removing and replacing the old defective/worn-out bearings, servicing including replacement of carbon brush, bendix drive, cleaning commutator in armature etc assembling and testing for satisfactory function all as directed. |
| 37 | Supply only auxiliary contactor suitable for AMF panel of 15 to 320 KVA DG set |
| 38 | Supply only power contactor suitable for AMF Panel of 15 to 320 KVA DG set |
| 39 | Supply only 8 pin 24 V DC relay |
| 40 | Supply only logic controller suitable for AMF panel of DG set 15-320 KVA Make C&S or equivalent |
| 41 | Supply only Coolant for radiator |
| 42 | Repairs to door of acoustic enclosure of DG set cap 20 KVA by taking down and replacing the door hinges and door lock including all M&L and as directed. |
| 43 | Supply only distilled water into battery capacity of 12/24 Volt 88/90/180 AH all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply only Automatic Voltage Regulator (AVR) for 15 to 35 KVA DG sets all as specified and directed. Make : Kirloskar or its equivalent. |
| 45 | Supply andLayingGI tubing medium grade of size 50 mm with and including all fittings such as bends, elbows, tees, short pieces etc complete in trenches of following sizes after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. Note- Excavation & earth work will be measured & paid seperately. |
| 46 | All as per item No 31 above but 40 mm bore |
| 47 | All as per item No 31 above but 25 mm bore |
| 48 | Supply & Fixing of Size 40 mm GI tubing medium grade withand including all fittings such as bends, elbows, tees, short pieces etc complete on wall and ceiling or laid in floors after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. |
| 49 | All as per item No 34 above but 25 mm bore |
| 50 | All as per item No 34 above but 20 mm bore |
| 51 | Repairs to leakage /damaged G.I. pipe of size 50/40 mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples, Bends etc. all asdirected by Engr- in- charge.Note:- G.I. pipe length will be measured and paid separately under relevant item of sch A |
| 52 | All as per item No 37 above but 25/20 mm bore |
| 53 | Supply and fix in repairs gun metal gate valve of size 50 mm ISI marked with iron wheel head screwed both ends all as directed. |
| 54 | All as per item No 39 above but 40 mm bore |
| 55 | All as per item No 39 above but 25 mm bore |
| 56 | All as per item No 39 above but 20 mm bore |
| 57 | All as per item No 39 above but 15 mm bore |
| 58 | S&F in repairs un plasticised PVC pipe, 25mm bore of pressure rating 10 Kg/Sqcm with all fittings, fixed to walls, ceilings or in floors complete with snap clips hooks etc and taking out old unserviceable one all as specified an as directed |
| 59 | All as per item No 44 above butof size 20 mm bore dia |
| 60 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil forlaying/taking out GI pipe line all as specified and directed. |
| 61 | Returning filling in including spreadinglevelling watering and well rammingin layer not exceeding 25 cm in soft/loose soil all as specified and directed. |
| 62 | Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mabove the starting point all as specified and directed. |
| 63 | M & L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside of the RCC Under Ground Sump of10,000 Ltrscapacity by dewatering the sump and cleaning the complete inner surfaces by rubbing / scrapping by wire brush to removethe sludge, washing with bleaching powder solution and then with water and draining out sludge, water completely including applying one coat of white wash to all the inner surfaces, and details of tanks like date of cleaning ,capacity of tanks etc shall be written on the outside of the tank with synthetic enamel paint with lettersize 20 cm high in white colour, over a black backgroundof size 100x60 cmand charges included for pump set for de watering incl operator all as specified anddirected |
| 64 | M&L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside PVC Service tanks kept on roof top of buildings or on staging, cleaning the surface using brush and other cleaning materials such as bleaching powder as required including writing the capacity of the tank and date of cleaning with white enamel paint over black back ground all as specified and directed for the following capacity of tanks at different locations on Technical/Residential Buildings all as specified and directed by Engr-in-Charge. |
| 65 | 2000 Ltr capacity |
| 66 | 1000 Ltr Capacity |
| 67 | 500/300 Ltr capacity |
| 68 | S&F in repairs float Valve 40mm bore (Ball brass valves) high pressure type with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and taking out old unserviceable one all as specified and directed |
| 69 | All as per item no51 above but of size 25mm bore |
| 70 | All as per item no51 above but of size 20mm bore |
| 71 | S&F in repair/replacement HDPE Tank cover suitable for 300 to 1000 Litr capacity and taking out old unserviceable one |
| 72 | All as per item No 54 above but for 2000Ltr capacity tanks |
| 73 | M&L for repair/replacement ofFoot valve of size 50mmbrass heavy duty including taking up the suction pipe and refixing the same after replacement of foot valve in to the sump for proper functioning of pump and taking out old unserviceable one all as specified and directed |
| 74 | Dismantling of Monoblock Pumpset from the existing position for servicing including opening the pump replacing the unserviceable ball bearings of suitable size for capacities up to 2 HP including greasing complete all as specified and directed |
| 75 | Repairs and servicing of Electric chlorine dozing Pump/ system Make Sathya sai Aqua Pure Services with Antisyphon valve includingservicing ofpump and motor with repair/ replacement of unserviceable parts like piston, stroke controller, suction and delivery tubing, PVC foot valve, nozzle, solution tank inlet, PVC water tubing 15mmbore, gate valve 15mm size etc, complete aall as specified and directed. |
| 76 | M&L for cleaning of pump set"s starter panel after dismantling the incomming and outgoing connections from MCCB"s/MCB"s and replacing the old unserviceable gland ,lugs, nuts &bolts, push buttons, indicating lamps, supporting insulators etc, and checking the serviceability of MCB"s cables and earth continuity conductor including replacement of worn out and unserviceable minor acessories allas specified and directed |
| 77 | M&L for Replacement of unserviceable DOL Starter suitable for motor up to 5 HPincluding connections |
| 78 | Repairing the old Valve pit of dimension 60x45x45 cm by taking out plaster and rendering with 10mm thick CM(1:4) including PCC (1:3:6) TYPE C2, brick work inCM (1:4) as required and applying two coats of white wash on plastered surface including applying two coats of synthetic enamel paint over one coat of red oxide primer over steel surfaces after preparation, complete all as specified and directed |
| 79 | M&L for painting pumpset including preparation old surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer including marking the signs, letters, Nos on the pumpsetof capacity up to 2HP all as specified and as directed. |
| 80 | M&L for painting of old painted GI pipe of any size on the external surfaces after preparation, located in and out of Pump House, by srapping and cleaning of external surfaces and applying two coats of Sky Blue paint over a coat of red oxide primer complete all as specified and directed. |
| 81 | Dismantling , taking out complete burnt winding wire of submersible motor including cleaning of statorslots replacement of defective parts and rewinding with existing type & gauge ofcopper wireas per motor capacity and using new insulation material such as insulating paper sleeves etc. replacement of submersible cable as required length complete all as directed of rating 1.5/2HP Single phase |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
